Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ELECTROMAGNETIC MEASUREMENT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Testing gravitational parity violation with coincident gravitational waves and short gamma-ray bursts

Gravitational parity violation is a possibility motivated by particle physics, string theory, and loop quantum gravity. One effect of it is amplitude birefringence of gravitational waves, whereby left and right circularly polarized waves propagate at the same speed but with different amplitude evolution. Here we propose a test of this effect through coincident observations of gravitational waves and short gamma-ray bursts from binary mergers involving neutron stars. Such gravitational waves are highly left or right circularly polarized due to the geometry of the merger. Using localization information from the gamma-ray burst, ground-based gravitational wave detectors can measure the distance to the source with reasonable accuracy. An electromagnetic determination of the redshift from an afterglow or host galaxy yields an independent measure of this distance. Gravitational parity violation would manifest itself as a discrepancy between these two distance measurements. We exemplify such a test by considering one specific effective theory that leads to such gravitational parity violation, Chern-Simons gravity. We show that the advanced LIGO-Virgo network and all-sky gamma-ray telescopes can be sensitive to the propagating sector of Chern-Simons gravitational parity violation to a level roughly 2 orders of magnitude better than current stationary constraints from the LAGEOS satellites.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Level-1 Trigger of the GlueX experiment at Jefferson Lab

The GlueX is a new experiment at Jefferson Lab designed to search for mesons with exotic-quantum-numbers using high-intensity beam of polarized photons incident on a liquid hydrogen target. The goal of the Level-1 trigger of the GlueX experiment is to reduce the background rate induced by electromagnetic and hadronic interactions (to 200 kHz total rate) while keeping efficiency for accepting exotic mesons of interest close to unity. The trigger algorithm is based on measurement of the energy depositions in two electromagnetic calorimeters and hit counts in the tagger hodoscopes, the time-of-flight detector, and the Start Counter. The algorithm will be implemented on electronics boards developed at Jefferson Lab, which will perform online data processing at a 250 MHz clock. We will describe the Level-1 trigger algorithm and overview the trigger electronics.

Somov, Alexander↗

Determining the Hubble constant through cross-correlation of galaxies and gravitational waves

Gravitational-wave (GW) standard sirens have the potential to measure the Hubble constant 𝐻 0 in the local Universe independent of the distance ladder and thus offer unique insights into the Hubble tension. A key challenge with standard sirens is detecting their electromagnetic counterparts and therefore assigning redshifts to the measured distances. One promising way to proceed is to utilize GW dark sirens—events without an identified electromagnetic counterpart—and cross-correlate their angular distribution with that of galaxies. We present a quantitative study of how precisely the Hubble constant can be measured using tomographic cross-correlation between galaxies and GW sources. Altogether, we find that the constraints on 𝐻 0 will be limited by the quality and quantity of GW data. We find that percent-level constraints on 𝐻 0 will primarily depend on achieving small distance uncertainties (𝜎 𝑑𝐿 = 0.1⁢𝑑 𝐿 ), obtaining a large number of GW dark sirens (≳ 5⁢000) and accurate sky localization in the tomographic analysis.

Cosmological parameters↗

Electromagnetic Transition Form Factors of Nucleon Resonances

Recent measurements of nucleon resonance transition form factors with CLAS at Jefferson Lab are discussed. The new data resolve a long-standing puzzle of the nature of the Roper resonance, and confirm the assertion of the symmetric constituent quark model of the Roper as the first radial excitation of the nucleon. The data on $n\pi^+$ production at high $Q^2$ confirm the slow fall off of the $S_{11}(1535)$ transition form factor with $Q^2$, and better constrain the branching ratios $\beta_{N\pi}=0.50$ and $\beta_{N\eta}=0.45$. Also, new results on the transition amplitudes for the $D_{13}(1520)$ resonance are presented showing a rapid change from helicity 3/2 dominance seen at the real photon point to helicty 1/2 dominance at higher $Q^2$.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

New method of experimental determination of all three deuteron electromagnetic form factors

By elastic scattering of unpolarized electrons on a polarized deuteron target in the direction of the three momenta of the outgoing deuteron and by measuring the vector polarization of the final deuteron in the same direction and at the same values of squared transferred momenta t as the unpolarized elastic electron-deuteron cross-section is measured, one can find out all three deuteron electromagnetic form factors in the space-like region.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Development of rapid, continuous calibration techniques and implementation as a prototype system for civil engineering materials evaluation

Until recently, civil engineering material calibration data could only be obtained from material sample cores or via time consuming, stationary calibration measurements in a limited number of locations. Calibration data are used to determine material propagation velocities of electromagnetic waves in test materials for use in layer thickness measurements and subsurface imaging. Limitations these calibration methods impose have been a significant impediment to broader use of nondestructive evaluation methods such as ground-penetrating radar (GPR). In 2006, a new rapid, continuous calibration approach was designed using simulation software to address these measurement limitations during a Federal Highway Administration (FHWA) research and development effort. This continuous calibration method combines a digitally-synthesized step-frequency (SF)-GPR array and a data collection protocol sequence for the common midpoint (CMP) method. Modeling and laboratory test results for various data collection protocols and materials are presented in this paper. The continuous-CMP concept was finally implemented for FHWA in a prototype demonstration system called the Advanced Pavement Evaluation (APE) system in 2009. Data from the continuous-CMP protocol is processed using a semblance/coherency analysis to determine material propagation velocities. Continuously calibrated pavement thicknesses measured with the APE system in 2009 are presented. This method is efficient, accurate, and cost-effective.

42 ENGINEERING↗

SU-F-T-321: The Effect of an Electromagnetic Array Used for Patient Localization and Tumor Tracking On OSLD in Vivo Dosimetry

Purpose: The purpose of this study was to observe the effect of an electromagnetic array used for patient localization and tumor tracking on optically-stimulated luminescent in-vivo dosimetry. Methods: A linear accelerator equipped with four photon energies was used to irradiate optically stimulated luminescent dosimeters (OSLDs) at the respective dmax depths and in the buildup region, with and without the presence of an electromagnetic array used for tumor tracking and patient localization. The OSLDs were placed on solid water slabs under 5 mm bolus and on each face of an octagonal phantom, and irradiated using both static beam and arc geometry, with and without the electromagnetic array under our setup. The electromagnetic array was placed 6 cm above the phantom to coincide with similar distances used during patient treatment. Ionization chamber measurements in a water phantom were also taken initially for comparison with the simple geometry OSLD measurements and published data. Results: Under simple geometry, a negligible change was observed at dmax for all energies when the electromagnetic array was placed over the setup. When measuring at five millimeter depth, increases of 1.3/3.1/16/18% were observed for energies 4X/6X/10X/15X respectively when the electromagnetic array was in place. Measurements using the octagonal phantom yielded scattered results for the lateral and posterior oblique fields, and showed increases in dose to the OSLDs placed on the anterior and lateral anterior faces of the phantom. Conclusion: Placing the electromagnetic array very close to the patient’s surface acts as a beam spoiler in the buildup region (at 5 mm depth), which in turn causes an increase in the measured dose reading of the OSLD. This increase in dose is more pronounced when the OSLD is placed directly underneath the electromagnetic array than off to one side or the other.

43 PARTICLE ACCELERATORS↗

Measurement of the cross section of top quark pairs produced in association with a Photon in Lepton +Jets events at $\sqrt{s}$ = 13 TeV with full Run II CMS data

The inclusive production cross section of top quark pairs in association with a photon is measured in proton-proton collisions at the LHC with 13 TeV energy using the full RunII data collected by CMS in 2016, 2017, and 2018 with a total corresponding integrated luminosity of 137 fb$^{-1}$. The relative fraction of t$ \bar{t} \gamma$ events normalized to inclusive t$ \bar{t}$ production is measured. The cross section measurement provides important information about the electromagnetic coupling of the standard model top quark and is sensitive to physics beyond the standard model. The analysis is carried out in the in semileptonic decay channel with a well isolated high P$ \_{T}$ lepton (electron and muon), at least four jets out of which at least one must be b-tagged, and an isolated photon. Photons may be emitted from initial state radiation, top quarks, and decay products of top quarks. The fiducial phase space with a photon of transverse momentum $ \ge$ 20 GeV and j\x11$ \eta$ <1.4441 is used. A simultaneous likelihood fit of control regions with the signal region is done to constraint the backgrounds and to extract the t$ \bar{t} \gamma$ cross section. The measurement of the ratio of t$ \bar{t} \gamma$ to t$ \bar{t}$ is $0.02055 \pm 0.00099$ (syst.) $ \pm 0.00099$ (stat.) in $e$ channel , 0.02156 $ \pm$ 0.00068 (syst.) $ \pm$ 0.00068 (stat.) in $ \mu$ channel , and 0.02203 $ \pm$ 0.00064 (syst.) $ \pm$ 0.00064 (stat.) in e + $ \mu$ channel , respectively. The measured inclusive cross section is 3.81 $ \pm$ 0.15 (syst.) $ \pm$ 0.10 (stat.) pb in e channel , 3.87 $ \pm$ 0:11 (syst.) $ \pm$ 0:07 (stat.) pb in $ \mu$ channel , and 3.96 $ \pm$ 0.10 (syst.) $ \pm$ 0.06 (stat.) pb in e + $ \mu$ channel , respectively for full RunII data. The total inclusive cross section with a photon of transverse momentum $ \ge$ 20 GeV is found to be 3.96 $ \pm$ 0.10 (syst.) $ \pm$ 0.06 (stat.) pb with full RunII CMS data. The results are in agreement with the standard model next to leading order prediction.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Beam Measurements of the Tianlai Dish Radio Telescope using an Unmanned Aerial Vehicle

Precision measurement of the beam pattern of an antenna is very important for many applications. While traditionally such measurement is often made in a microwave anechoic chamber or at a test range, measurement using an unmanned aerial vehicle offers a number of advantages: the measurement can be made for the assembled antenna on site, thus reflecting the actual characteristics of the antenna of interest, and more importantly, it can be performed for larger antennas which cannot be steered or easily measured using the anechoic chamber and test range. Here we report our beam measurement experiment with UAV for a 6 meter dish used in the Tianlai array, which is a radio astronomy experiment. Due to the dish's small collecting area, calibration with an astronomical source only allows for determining the antenna beam pattern over a very limited angular range. We describe in detail the setup of the experiment, the components of the signal transmitting system, the design of the flight path and the procedure for data processing. We find the UAV measurement of the beam pattern agrees very well with the astronomical source measurement in the main lobe, but the UAV measurement can be extended to the fourth side lobe. The measured position and width of each lobe also shows good agreement with electromagnetic field simulation. This UAV-based approach of beam pattern measurement is flexible and inexpensive, and the technique may also be applied to other experiments.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Strong and electromagnetic J/{psi} and {psi}(2S) decays into pion and kaon pairs

A combined analysis of the electromagnetic pion and kaon form factors in the neighborhood of J/{psi} and {psi}(2S) and of the strong decay amplitude of these resonances into kaons is presented. In the presence of a large relative phase between strong and electromagnetic resonance amplitudes the branching ratio, as measured in electron-positron annihilation, receives an additional contribution from the interference between resonance and continuum amplitude neglected in earlier papers. We note that the large relative phase between strong and electromagnetic amplitudes observed in earlier phenomenological analyses relies critically on the specific assumptions on SU(3) symmetry and breaking. Without these assumptions this phase remains effectively undetermined. Also, the modulus of their ratio depends critically on the details of the theory input.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Shapes and Fall Orientations of Ice Particle Aggregates

Testing the often-made assumption that ice particle aggregates (snowflakes) are well represented by oblate spheroids, ellipsoid fits are applied to aggregate images. An algorithm to retrieve both the ellipsoidal parameters and the orientations of the fitted ellipsoids is applied to Multi-Angle Snowflake Camera measurements of ice particle aggregates observed in Alaska. The resulting ellipsoids have shapes closer to prolate spheroids than the oft-assumed oblate spheroids. A robust linear relationship exists between the two characteristic aspect ratios of the ellipsoids. The most probable orientation of the maximum dimension of the retrieved ellipsoids is not in the horizontal plane, and the rotational angles of the maximum dimensions in the horizontal plane are not uniform, but instead display some correlation with the wind direction at the times of the measurements. The retrieval results can be used to improve the representation of aggregates in microphysics and/or electromagnetic radiation scattering models applicable to radar and satellite measurements.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Radio Frequency Transients Correlated with Electron Flux Measured On-Board the STP-Sat6

We analyzed transient electromagnetic signatures, referred to as spacecraft environment discharges (SEDs) or on-board discharges (OBDs), and the in-situ particle environment simultaneously measured by the Radio Frequency Sensor (RFS) and the Space and Atmospheric Burst Reporting System Z-plasma spectrometer (SABRS-ZPS), respectively. These sensors are on-board the U.S. Department of Defense Space Test Program Satellite 6 (STP-Sat6) in geostationary orbit. Radio frequency signatures of SEDs on STP-Sat6 have relatively high peak amplitudes; they often caused amplitude-saturation in the so-called high band (120–140 MHz frequency range) of the RFS likely due to the proximity of their source to the RFS’s dipole antennas. We examined the occurrence rate of SEDs reported by the RFS and its temporal relationship to electron flux in the 7.9–12.2 keV range. Peaks in SED count rates were time-correlated with peaks in electron flux. The electron-flux peaks appeared to lead the SED count rate peaks by 24–45 min for the 7.9–12.2 keV energies. This indicates that incidence of electrons at this relatively low-energy range likely resulted in ramping up of the charging of the spacecraft leading to periods of high occurrence rates of discharges in and around the spacecraft.

54 ENVIRONMENTAL SCIENCES↗

On the Possibility of the Existence of a Surface Electromagnetic Wave in the Permafrost Area

The results of measurements of the vertical component of electric field at a radio path with the permafrost at a frequency of 255 kHz have been interpreted. An analysis of the results has shown that the considered radio path exhibits the properties of a two-part impedance surface, i.e., it consists of two sections. At a distance of 70 km from a radiation source and at a frequency of 255 kHz of the electromagnetic wave, the field decreases with the distance R according to the power law as R{sup -1.5} and a power index takes an intermediate value between the power indices for decreasing the field in free space R{sup -2} and for the decrease in the field above an ideal conducting surface R{sup -1}. With further propagation at a distance of 70–220 km, the field shows the specific behavior of a surface electromagnetic wave.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Study on the Properties of Ionized Metal Plasma Methodology on Titanium

Ionized Metal Plasma (IMP) deposition was used in depositing metal interconnection of titanium metal film. Inductively coupled plasma (ICP) was attached to chamber wall where it creates an electromagnetic field, thus, ionizing the sputtered metal atoms from target. The film morphology was observed by scanning electron microscope (SEM). Acoustic measurement of titanium film thickness showed that there was a comparable result with film resistance measured by 4-point probe. Results show that higher plasma density would cause tensile properties on the film stress.

36 MATERIALS SCIENCE↗

Cylindrical Hall Thrusters with Permanent Magnets

The use of permanent magnets instead of electromagnet coils for low power Hall thrusters can offer a significant reduction of both the total electric power consumption and the thruster mass. Two permanent magnet versions of the miniaturized cylindrical Hall thruster (CHT) of different overall dimensions were operated in the power range of 50W-300 W. The discharge and plasma plume measurements revealed that the CHT thrusters with permanent magnets and electromagnet coils operate rather differently. In particular, the angular ion current density distribution from the permanent magnet thrusters has an unusual halo shape, with a majority of high energy ions flowing at large angles with respect to the thruster centerline. Differences in the magnetic field topology outside the thruster channel and in the vicinity of the channel exit are likely responsible for the differences in the plume characteristics measured for the CHTs with electromagnets and permanent magnets. It is shown that the presence of the reversing-direction or cusp-type magnetic field configuration inside the thruster channel without a strong axial magnetic field outside the thruster channel does not lead to the halo plasma plume from the CHT. __________________________________________________

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Numerical Prediction of Oscillation Behaviors of a Multiphase Core–Shell Droplet During Interfacial Tension Measurement

Interfacial tension between molten high-temperature materials is to be measured using the electrostatic levitation furnace (ELF) and the electromagnetic levitator (ISS-EML) aboard the International Space Station. A levitated compound droplet of a concentric core–shell structure is excited either by an impulsive electromagnetic field or by a superimposed electrostatic field. The oscillation behavior of the compound droplet is analyzed to measure interfacial tension at the interface of the two phases. In support of the space experiments, a computational fluid dynamic model was developed to characterize the oscillation behavior of multiphase core–shell droplet. The developed model predicted the interfacial tension between molten copper-rich and cobalt-rich phases with a difference of 3.3 pct compared to the values reported in literature. The developed model is being utilized to investigate the influence of various test parameters on measured surface tension and also being extended for molten steel–molten slag systems.

36 MATERIALS SCIENCE↗