Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Data depth”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Lake classification in Vermont

In order to comply with the Federal Clean Water Act and, in so doing, develop a procedure to periodically update the classification, the State of Vermont evaluated the ability of LANDSAT to detect general water quality and specific water quality parameters in Vermont lakes. Unsupervised and supervised classifications as well as regression analyses were used to examine LANDSAT data from Lake Champlain and from four small nearby lakes. Unsupervised and supervised classifications were found to be of somewhat limited value. Regression analyses revealed a good correlation between depth-integrated total phosphorus concentrations and LANDSAT band 4 data (r2= 0.92) and between Secchi disk transparencies and LANDSAT band 4 data (r2 - 0.85). No correlation was found between depth-integrated chlorophyll-a samples and LANDSAT data. Vermont is expanding this LANDSAT evaluation to include the remaining lakes in the state greater than twenty acres and steps are being taken to incorporate LANDSAT into the state's ongoing water quality monitoring programs.

Garrison, V.↗

Gravity survey of the Mount Toondina impact structure, South Australia

Gravity and seismic reflection data, together with geologic mapping, indicate that the Mount Toondina feature in South Australia is best interpreted as an eroded 4-km-diameter impact structure consisting of a ring structural depression surrounding a pronounced central uplift. Beds at the center of the structure within the central uplift have been raised as much as 200 m from depth and deformed by convergent flow. Seismic reflection data indicate that deformation extends to depths of only approximately = 800 m; at greater depths the reflectors are nearly flat lying, indicating little or no deformation. Gravity data show residual anomalies of +1.0 mGal coincident with the central uplift and a -0.5 Mgal low associated with the ring structural depression. Modeling of the gravity data indicates that relatively high-density material occurs within the central uplift, whereas the ring depression is filled with low-density material. The deformation at Mount Toondina is typical of a complex impact crater; the 4-km diameter is consistent with the expected threshold size for complex craters formed in weak to moderate strength sedimentary rocks.

Plescia, J. B.↗

Gravity Survey of the Mt. Toondina Impact Structure South Australia

Gravity and seismic reflection data, together with geologic mapping, indicate that the Mt. Toondina feature in South Australia is best interpreted as an eroded 4-km-diameter impact structure consisting of a ring structural depression surrounding a pronounced central uplift. Beds at the center of the structure within the central uplift have been raised as much as 200 m from depth and deformed by convergent flow. Seismic reflection data indicate that deformation extends to depths of only about 800 m; at greater depths the reflectors are nearly flat lying indicating little or no deformation. Gravity data show residual anomalies of +1.0 mGal coincident with the central uplift and a -0.5 mGal low associated with the ring structural depression. Modeling of the gravity data indicates that relatively high-density material occurs within the central uplift, whereas the ring depression is filled with low-density material. The deformation at Mt. Toondina is typical of a complex impact crater; the 4-km diameter is consistent with the expected threshold size for complex craters formed in weak to moderate strength sedimentary rocks.

Mt. Toondina Australia↗

Preliminary Studies Leading Toward the Development of a LIDAR Bathymetry Mapping Instrument

The National Aeronautics and Space Administration (NASA) at Goddard Space Flight Center (GSFC) has developed a laser ranging device (LIDAR) which provides accurate and timely data of earth features. NASA/GSFC recently modified the sensor to include a scanning capability to produce LIDAR swaths. They have also integrated a Global Positioning System (GPS) and an Inertial Navigation System (INS) to accurately determine the absolute aircraft location and aircraft attitude (pitch, yaw, and roll), respectively. The sensor has been flown in research mode by NASA for many years. The LIDAR has been used in different configurations or modes to acquire such data as altimetry (topography), bathymetry (water depth), laser-induced fluorosensing (tracer dye movements, oil spills and oil thickness, chlorophyll and plant stress identification), forestry, and wetland discrimination studies. NASA and HARC are developing a commercial version of the instrument for topographic mapping applications. The next phase of the commercialization project will be to investigate other applications such as wetlands mapping and coastal bathymetry. In this paper we report on preliminary laboratory measurements to determine the feasibility of making accurate depth measurements in relatively shallow water (approximately 2 to 6 feet deep) using a LIDAR system. The LIDAR bathymetry measurements are relatively simple in theory. The water depth is determined by measuring the time interval between the water surface reflection and the bottom surface reflection signals. Depth is then calculated by dividing by the index of refraction of water. However, the measurements are somewhat complicated due to the convolution of the water surface return signal with the bottom surface return signal. Therefore in addition to the laboratory experiments, computer simulations of the data were made to show these convolution effects in the return pulse waveform due to: (1) water depth, and (2) changes in bottom surface reflectivity.

Hill, John M.↗

4.32 Billion Year Old Impact Melts at Apollo 14: Dating the Procellarum Basin?

Introduction: Recent work has improved our understanding of lunar crustal structure and basin evolution on the Moon, but its early impact history and implications for solar system dynamics remain poorly established [1,2]. In particular, there is a derth of absolute ages, especially for the period >4.0 Ga, that could be related to basin-forming events. Here we present U-Pb isotopic data for Zr-rich minerals found in impact-melt fragments from Apollo 14 soil sample 14163 that, when combined with previously published data, dates an impact event at 4324±15 Ma. The compositions and ages of these impact-melt fragments provide unique information about the timing of early impact events and the composition of the lunar crust. Results: Fourteen rocklets ranging in size from 1 to 3 mm were extracted from soil 14163. Most are impactmelt rocks with 10-30% clasts of mostly pyroxene and plagioclase (100 to 500 μm) in a crystalline matrix. Textures of the matrix vary from subophitic, formed by intergrowths of 10-20 μm plagioclase and pyroxene crystals, to poikilitic, with plagioclase and pyroxene reaching 20-50 μm size. Some fragments that contain no visible clasts have similar textures are also interpreted as impact-melt rocks. All fragments contain notably large proportions of euhedral to subhedral ilmenite, zircon, apatite/merrillite and less abundant zirconolite and baddeleyite in the melt matrices. These grains often form intricate intergrowths with each other and rock-forming minerals, indicating their crystallization from the melt (Fig. 1). However, some slightly larger (~50 μm) zircon and phosphate grains can be interpreted as relict clasts based on their granular textures and relationships with the surrounding phases (Fig. 1). This implies that zircon and phosphate minerals were present in the target rocks. Some of these grains were profoundly remelted during the impact, which resulted in an oversaturation of the melt in Zr and P and crystallization of new grains of Zrrich minerals and phosphates during melt solidification. The presence of zircon and phosphates indicates that the melts were significantly enriched in KREEP components and ties their provenance to the Procellarum- KREEP Terrane (PKT) [3]. Combined U-Pb zircon data obtained for all fragments form two main clusters on a concordia diagram (Fig. 2), between about 4.3 and 3.9 Ga. Phosphate data mostly concentrate on the younger end of this age range but some analyses are almost as old as the older zircon grains (Fig. 2). Figure 1: Zircon (Zr) and phosphate (Apt; Mer) grains in impact melt fragments from Apollo 14 soil 14161. A-zircon grains crystallized from impact melt; B-phosphate grain inherited from the target; C- granular zircon grains Our interpretation of these data is that all U-rich minerals experienced variable resetting of the U-Pb system, with phosphate, where closure temperature is significantly lower than that in zircon, affected more profoundly by Pb loss than zircon. Our best estimate of the time of formation of zircon and phosphate is based on statistically valid analysis of grains interpreted texturally as grown from the impact melt (Fig. 2). Ten of these analyses define an age of 4324±15 Ma (MSWD=3.0, probability of fit P=0.002). Our best estimate for the time of resetting is obtained by combining data from phosphates that are statistically indistinguishable from 3.9 Ga within the analytical uncertainties. This group is represented by 18 analyses of 15 phosphate grains from different fragments (Fig. 2) and defines an age of 3922±6 Ma (MSWD=1.2, P=0.23). Conversely, a minimum age of the target lithologies, remelted in the impact that produced the rocklets studied here (Fig. 2), can be determined from the five oldest analyses of zircon clasts at 4338±13 Ma (MSWD=1.5, P=0.2), which is indistinguishable from the age of the impact melt within the uncertainties. The obtained ages, combined with textural evidence, imply that the impact melt was formed at 4324±15 Ma, and that it occurred in a zircon-rich target with a minimum age of 4338±13 Ma. Further reworking occurred during a second impact event at 3922±6 Ma. Discussion: The younger age of 3922±6 Ma can be interpreted as the time of the Imbrium impact. The older age of 4324±15 Ma would then be the time of formation of the impact melt, which was then caught in the Imbrium ejecta either at the Apollo 14 landing site or within the target rocks of the Imbrium impact. The presence of abundant accessory phases such as zircons and phosphates is consistent with a substantial KREEP component in the analyzed particles. The current distribution of KREEP on the lunar surface appears to be strongly influenced by Imbrum ejecta [4] so interpretation of the 4.32 Ga age depends in part on assumed structure of the pre-impact crust and distribution of KREEP within the crust. If KREEP was present only in the deep crust at 4.32 Ga, then a basin-scale impact possibly analogous to Imbrium or larger may be necessary to excavate a KREEPy impact melt at this time. However, if KREEPy materials were present closer to the surface perhaps due to redistribution related to Mg-suite magmatism, then smaller impacts might be able to rework KREEPy compositions at shallower depths. The coherence of the data on the particles analysed here suggests a large volume of melt that has been preserved since 4.32 Ga, consistent with a large impact event. Relict zircons and mineral clasts suggests that the igneous crust in the vicinity of this impact was well developed by at least 4.34 Ga, similar to the model age of KREEP and older than the isochron ages of many Mg-suite cumulates [5]. A problem that confronts all lunar sample studies using the current collection is that the pre-Imbrium geology of the PKT (the source of these 4.32 Ga impact melts) is not well constrained. The South Pole-Aitken basin contains regions that are moderately enriched in Th, but its ejecta is Th-poor [6]; therefore these A14 fragments are probably not SPA ejecta. Alternatively, these fragments may represent formation of a hypothesized Procellarum basin [7] although the lack of a clearly defined basin ejecta signature is a potential problem with that interpretation. In any case, they provide a younger limit on the age of lunar differentiation and formation of KREEP within the lunar crust. Figure 2: U-Pb data for zircon and phosphate grains from impact melt fragments. A-all data; B-data used for age calculations. References: [1] Orgel C., Michael G., Fassett C. I., van der Bogert C. H., Riedel C., Kneissl T., and Hiesinger H. (2018) J. Geophys. Res. Planets 123, 748- 762. [2] Evans A. J., Andrews-Hanna J. C., Head J. W., Soderblom J. M., Solomon S. C., and Zuber M. T. (2018) J. Geophys. Planets. 123, 1596-1617. [3] Jolliff, B.L., Gillis, J.J., Haskin, L.A., Korotev, R.L. and Wieczorek, M.A. (2000) J. Geophys. Res: Planets 105, 4197-4216. [4] Haskin L. A. (1998) J. Geophys. Res. Planets 103, 1679-1689. [5] Borg L.E., Gaffney A.M., and Shearer C.K. (2015) MAPS 50, 715-732. [6] Moriarty, D.P., Watkins, R.N., Valencia, S.N., Kendall, J.D., Evans, A.J., Dygert, N. and Petro, N.E. (2021) J. Geophys. Res. Planets 126. [7] Zhu, M.H., Wünnemann, K., Potter, R.W., Kleine, T. and Morbidelli, A. (2019) J. Geophys. Res: Planets 124, 2117-2140

M D Norman↗

Temporal variations in atmospheric water vapor and aerosol optical depth determined by remote sensing

By automatically tracking the sun, a four-channel solar radiometer was used to continuously measure optical depth and atmospheric water vapor. The design of this simple autotracking solar radiometer is presented. A technique for calculating the precipitable water from the ratio of a water band to a nearby nonabsorbing band is discussed. Studies of the temporal variability of precipitable water and atmospheric optical depth at 0.610, 0.8730 and 1.04 microns are presented. There was good correlation between the optical depth measured using the autotracker and visibility determined from National Weather Service Station data. However, much more temporal structure was evident in the autotracker data than in the visibility data. Cirrus clouds caused large changes in optical depth over short time periods. They appear to be the largest deleterious atmospheric effect over agricultural areas that are remote from urban pollution sources.

Pitts, D. E.↗

High Speed Vortex Flows

A review of the research conducted at the National Aeronautics and Space Administration (NASA), Langley Research Center (LaRC) into high-speed vortex flows during the 1970s, 1980s, and 1990s is presented. The data reviewed is for flat plates, cavities, bodies, missiles, wings, and aircraft. These data are presented and discussed relative to the design of future vehicles. Also presented is a brief historical review of the extensive body of high-speed vortex flow research from the 1940s to the present in order to provide perspective of the NASA LaRC's high-speed research results. Data are presented which show the types of vortex structures which occur at supersonic speeds and the impact of these flow structures to vehicle performance and control is discussed. The data presented shows the presence of both small- and large scale vortex structures for a variety of vehicles, from missiles to transports. For cavities, the data show very complex multiple vortex structures exist at all combinations of cavity depth to length ratios and Mach number. The data for missiles show the existence of very strong interference effects between body and/or fin vortices and the downstream fins. It was shown that these vortex flow interference effects could be both positive and negative. Data are shown which highlights the effect that leading-edge sweep, leading-edge bluntness, wing thickness, location of maximum thickness, and camber has on the aerodynamics of and flow over delta wings. The observed flow fields for delta wings (i.e. separation bubble, classical vortex, vortex with shock, etc.) are discussed in the context of' aircraft design. And data have been shown that indicate that aerodynamic performance improvements are available by considering vortex flows as a primary design feature. Finally a discussing of a design approach for wings which utilize vortex flows for improved aerodynamic performance at supersonic speed is presented.

Wood, Richard M.↗

Vortex Flows at Supersonic Speeds

A review of research conducted at the National Aeronautics and Space Administration (NASA) Langley Research Center (LaRC) into high-speed vortex flows during the 1970s, 1980s, and 1990s is presented. The data are for flat plates, cavities, bodies, missiles, wings, and aircraft with Mach numbers of 1.5 to 4.6. Data are presented to show the types of vortex structures that occur at supersonic speeds and the impact of these flow structures on vehicle performance and control. The data show the presence of both small- and large-scale vortex structures for a variety of vehicles, from missiles to transports. For cavities, the data show very complex multiple vortex structures exist at all combinations of cavity depth to length ratios and Mach number. The data for missiles show the existence of very strong interference effects between body and/or fin vortices. Data are shown that highlight the effect of leading-edge sweep, leading-edge bluntness, wing thickness, location of maximum thickness, and camber on the aerodynamics of and flow over delta wings. Finally, a discussion of a design approach for wings that use vortex flows for improved aerodynamic performance at supersonic speeds is presented.

Wood, Richard M.↗

Measurements of electron detection efficiencies in solid state detectors.

Detailed laboratory measurement of the electron response of solid state detectors as a function of incident electron energy, detector depletion depth, and energy-loss discriminator threshold. These response functions were determined by exposing totally depleted silicon surface barrier detectors with depletion depths between 50 and 1000 microns to the beam from a magnetic beta-ray spectrometer. The data were extended to 5000 microns depletion depth using the results of previously published Monte Carlo electron calculations. When the electron counting efficiency of a given detector is plotted as a function of energy-loss threshold for various incident energies, the efficiency curves are bounded by a smooth envelope which represents the upper limit to the detection efficiency. These upper limit curves, which scale in a simple way, make it possible to easily estimate the electron sensitivity of solid-state detector systems.

Lupton, J. E.↗

Characterization of Composite Damage Using Passive Thermography

Passive thermography is used to monitor small increases in temperature on a composite structure during loading. A rise in temperature can be attributed to damage formation due to matrix cracking and fiber breaks. An infrared camera allows for imaging the damage location, size, and shape. Recently, a technique has been developed to estimate the depth of the damage in a composite hat-stiffened panel during quasi-static loading. This technique is based on two heat generation components. The first component is an instantaneous thermoelastic response due to a strain release. The second component is mechanical heating, at the interface of failure, due to fracture damage. This second component produces a transient rise in temperature that is a function of the damage depth and thermal diffusivity. The first component defines the thermal start time for the transient response. A one-dimensional thermal model is used to determine the damage depth for a known thermal diffusivity. The results are compared to ultrasonic and X-ray CT data and show good agreement for damage depth.

Thermal nondestructive evaluation↗

Mars - Hellas Planitia gravity analysis

Doppler radio tracking data from Viking Orbiter 1 has provided new detailed observations of gravity variations over Hellas Planitia. Line-of-sight Bouguer gravity definitely indicates that isostatic adjustment has occurred. Two theoretical models were tested to obtain fits to the gravity data. Results for a surface deficit model, and a model with a surface deficit and a mass excess at depth are displayed. The mass-at-depth model produced very marked improvement in the data fit as compared to the surface deficit model. The optimum depth for the mass excess is 130 km.

Sjogren, W. L.↗

Estimating the Soil Temperature Profile from a Single Depth Observation: A Simple Empirical Heatflow Solution

Two data sets of experimental field observations with a range of meteorological conditions are used to investigate the possibility of modeling near-surface soil temperature profiles in a bare soil. It is shown that commonly used heat flow methods that assume a constant ground heat flux can not be used to model the extreme variations in temperature that occur near the surface. This paper proposes a simple approach for modeling the surface soil temperature profiles from a single depth observation. This approach consists of two parts: 1) modeling an instantaneous ground flux profile based on net radiation and the ground heat flux at 5cm depth; 2) using this ground heat flux profile to extrapolate a single temperature observation to a continuous near surface temperature profile. The new model is validated with an independent data set from a different soil and under a range of meteorological conditions.

Holmes, Thomas↗

An optical filtering system for remote sensing of phytoplankton and suspended sediment

Aerial photography revealing blue-green Anacystis phytoplankton blooms in the Potomac River is presented. Data scanned were near-IR, green, and yellow nadir radiance; concurrent ground measurements are correlated with these data, including salinity, Secchi disk depth, chlorophyll a concentration, and river depth. In nonbloomed areas, R (radiance) is proportional to the reciprocal of Secchi depth for the green and yellow filters; in bloomed areas, R is constant for the green filter and random for the near-IR and yellow filters.

Bressette, W. E.↗

International Ultraviolet Explorer (IUE) spacecraft battery performance update

January 26, 1987 marks the ninth inflight aniversary of the IUE spacecraft, launched into an eccentric synchronous orbit. The orbital path has subjected the spacecraft to 18 solar eclipse seasons since launch. Nine years of inflight operations culminate a major milestone for battery support to a spacecraft, which is well in excess of the initial 3 year design life. A brief outline of events, power system characteristics, and papers presented a previous battery workshops are provided. The IUE battery cell performance is excellent with the exception of the third electrode anomaly and temperature delta between batteries. Data indicates that battery depth-of-discharge (DOD) may be more critical to extend battery life than small operational temperature deltas between batteries. It is predicted that several additional years of battery life may be obtained by a reduction in operational battery DOD.

Tiller, Smith E.↗

Environment of Mars, 1988

A compilation of scientific knowledge about the planet Mars is provided. Information is divided into three categories: atmospheric data, surface data, and astrodynamic data. The discussion of atmospheric data includes the presentation of nine different models of the Mars atmosphere. Also discussed are Martian atmospheric constituents, winds, clouds, and solar irradiance. The great dust storms of Mars are presented. The section on Mars surface data provides an in-depth examination of the physical and chemical properties observed at the two Viking landing sites. Bulk densities, dielectric constants, and thermal inertias across the planet are then described and related back to those specific features found at the Viking landing sites. The astrodynamic materials provide the astronomical constants, time scales, and reference coordinate frames necessary to perform flightpath analysis, navigation design, and science observation design.

Kaplan, David I.↗

Application of fracture mechanics to predict the strength of filament-wound composite specimens with surface damage

The strength of a thick surface notched filament wound graphite/epoxy tensile specimen was predicted using fracture mechanics analysis. The prediction model depended upon the depth of the surface notch and upon the type of failure. Specimens failed in two stages: first a sublaminate with thickness equal to the depth of the surface cut, and second, for increasing load, a sublaminate with thickness equal to the initial thickness minus the cut depth. Analytical predictions and experimental data were in good agreement.

Morris, D. H.↗

Analysis of LDEF micrometeoroid/debris data and damage to composite laminates

A nomogram based on the number/distribution of micrometeoroid/debris hits recorded on the Long Duration Exposure Facility (LDEF) is presented. The nomogram permits the user to estimate the total number of impacts that a space structure would encounter as a function of time in orbit, exposed area, and angular location associated with the LDEF. Examples are presented on the application of the nomogram to satellites and space structures of different cross-sections to that of the LDEF. The effects of altitude and orbit inclination are also discussed. To further demonstrate the usefulness of this nomogram, results are compared to impact data measured on the UTIAS polymer matrix composite experiment (AO180). The impact damage occurring on these composite materials is examined, and data on hole size, penetration depth, and delamination area are presented.

Tennyson, R. C.↗