Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DENSITY OF STATES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
NASA NTRS1988

Stochastic estimation of organized turbulent structure - Homogeneous shear flow

A generalization of the conditional-eddy concept is proposed in which the conditional event specifies the local kinematic state in terms of the velocity and the deformation. Results are presented for stochastically estimated conditional eddies given the local kinematics. The equation governing the probability density function of a kinematic state has been derived for constant-property incompressible flow, providing a link between coherent flow structures corresponding to the conditional eddies and the modelling of turbulent transport. The primary contributions to the second-quadrant and fourth-quadrant Reynolds-stress events in homogeneous shear flow are shown to come from flow induced through the 'legs' and close to the 'heads' of upright and inverted 'hairpins', respectively.

Adrian, Ronald J.↗
NASA NTRS1995

The circumstellar nature of the metallic features in a hot DA white dwarf

A new co-added IUE echelle spectrum of the bright DA white dwarf CD -38 deg 10980, together with a newly determined radial velocity for this star, indicate that the sharp lined Si and C absorption features seen in the UV are clearly circumstellar in origin. Absorption in both excited and ground state transitions occurs at a velocity displaced by -12.1 +/- 2.0 km.s with respect to the photospheric velocity. Weak features due to the Si IV doublet are seen at a velocity intermediate between that of the circumstellar features and the photosphere. First time estimates of column densities for excited and ground states of C II, Si II, and Si III are derived. These quantities are used with electron density estimates derived from these species to determine the location and physical conditions of the circumstellar gas in the vicinity of CD -38 deg 10980. If collisional excitation alone is responsible for the excited levels of Si III observed in CD -38 deg 10980, then electron densities in the circumstellar gas must exceed 10(exp 9)/cu cm. Substantially lower electron densities are possible if the circumstellar gas is located near enough to the star so that photoexcitation is the dominant process responsible for the excited lines seen in the UV. Strong limits are placed on the photospheric abundance of Si and C in the star itself. These limits are in sharp contrast to the theoretical predictions of radiative levitation in which Si, but not C, is expected in the photosphere of a white dwarf such as CD -38 deg 10980. The interstellar line of sight to CD -38 deg 10980 is also investigated.

Holberg, J. B.↗
NASA NTRS2005

Characterization of an 8-cm Diameter Ion Source System

Results of tests characterizing an 8-cm diameter ion source are presented. The tests were conducted in three separate vacuum test facilities at the University of Alabama-Huntsville, Colorado State University, and L3 Communications' ETI division. Standard ion optics tests describing electron backstreaming and total-voltage-limited impingement current behavior as a function of beam current were used as guidelines for selecting operating conditions where more detailed ion beam measurements were performed. The ion beam was profiled using an in-vacuum actuating probe system to determine the total ion current density and the ion charge state distribution variation across the face of the ion source. Both current density and ExB probes were utilized. The ion current density data were used to obtain integrated beam current, beam flatness parameters, and general beam profile shapes. The ExB probe data were used to determine the ratio of doubly to singly charged ion current. The ion beam profile tests were performed at over six different operating points that spanned the expected operating range of the DAWN thrusters being developed at L3. The characterization tests described herein reveal that the 8-cm ion source is suitable for use in (a) validating plasma diagnostic equipment, (b) xenon ion sputtering and etching studies of spacecraft materials, (c) plasma physics research, and (d) the study of ion thruster optics at varying conditions.

Li, Zhongmin↗
NASA NTRS1987

Influence of collective effects on lifetimes of condensed excited states

The possibility that collective effects may dramatically influence autoionization-limited lifetimes of condensed excited states is investigated in the context of a two-band model of an insulator in a strong magnetic field. Two different mechanisms for suppressing autoionization are discussed which may prevent the potentially catastrophic destruction of the excited state. Under appropriate circumstances, the residual low-density Auger electrons may be confined in a superconducting state and paired by excitonic fluctuations in the conduction band.

Zmuidzinas, Jonas Stasys↗
NASA NTRS1983

NMR studies of electronic structure in crystalline and amorphous Zr2PdH/x/

The proton Knight shifts and spin-lattice relaxation times have been measured in crystalline and amorphous Ze2PdH(x). Core polarization from the Zr d-band dominates the proton hyperfine interactions. The density of Fermi level d-electron states is reduced in the amorphous phase relative to the electron density in crystalline Zr2PdH(x).

Bowman, R. C., Jr.↗
NASA NTRS1975

Application of the MOS C-V technique to determine impurity concentrations and surface parameters on the diffused face of silicon solar cells

An experimental and theoretical investigation of the feasibility of using the MOS C-V (capacitance-voltage) technique to determine impurity and surface state concentrations on the diffused face of Si solar cells with Ta2O5 coatings. Impurity concentration 10 A from the diffused surface is found to be 2.9 times 10 to the 20th power per cu cm. Charge density in surface and oxide states is 2.1 times 10 to the 13th power per sq cm. These data agree with theoretical predictions.-

Weinberg, I.↗
NASA NTRS1974

Crystallization of dense neutron matter

The equation of state for cold neutron matter at high density is studied in the t-matrix formulation, and it is shown that energetically it is convenient to have neutrons in a crystalline configuration rather than in a liquid state for values of the density exceeding 1600 Tg/cu cm. The study of the mechanical properties indicates that the system is stable against shearing stresses. A solid core in the deep interior of heavy neutron stars appears to offer the most plausible explanation of speed-ups observed in the Vela pulsar.

Canuto, V.↗
NASA NTRS1976

Determination of the line shapes of atomic nitrogen resonance lines by magnetic scans

A technique is given for calibrating an atomic nitrogen resonance lamp for use in determining column densities of atoms in specific states. A discharge lamp emitting the NI multiplets at 1200 A and 1493 A is studied by obtaining absorption by atoms in a magnetic field (0-2.5 T). This magnetic scanning technique enables the determination of the absorbing atom column density, and an empirical curve of growth is obtained because the atomic f-value is known. Thus, the calibrated lamp can be used in the determination of atomic column densities.

Lawrence, G. M.↗
NASA NTRS2010

Repetitive Interrogation of 2-Level Quantum Systems

Trapped ion clocks derive information from a reference atomic transition by repetitive interrogations of the same quantum system, either a single ion or ionized gas of many millions of ions. Atomic beam frequency standards, by contrast, measure reference atomic transitions in a continuously replenished "flow through" configuration where initial ensemble atomic coherence is zero. We will describe some issues and problems that can arise when atomic state selection and preparation of the quantum atomic system is not completed, that is, optical pumping has not fully relaxed the coherence and also not fully transferred atoms to the initial state. We present a simple two-level density matrix analysis showing how frequency shifts during the state-selection process can cause frequency shifts of the measured clock transition. Such considerations are very important when a low intensity lamp light source is used for state selection, where there is relatively weak relaxation and re-pumping of ions to an initial state and much weaker 'environmental' relaxation of the atomic coherence set-up in the atomic sample.

Rabi interrogation↗
NASA NTRS1979

Gas dynamics in barred spirals - Gaseous density waves and galactic shocks

Steady-state gasdynamical studies, previously limited to tightly wound normal spiral galaxies, are extended to models of barred spirals with a 5% to 10% perturbing potential. The models show that a strong wave manifestation is an important constituent of the bar structure in many barred spirals and that a density-wave shock wave can form a bar structure as pronounced as the narrow bars often evident in optical photographs of barred spirals. The dark narrow dust lanes often observed along the leading edges of bar structures are identified as tracers of shocks, and it is found that strong shocks along a bar structure during even a small part of a galaxy's lifetime might easily deplete a large enough proportion of the gas to cause a lack of gas in the inner annuli encompassing the bar by the time of the present epoch. It is emphasized that even moderate-amplitude barlike perturbations in the disk can drive large noncircular gas motions, typically 50 to 150 km/s.

Roberts, W. W., Jr.↗
NASA NTRS1972

The physics of the neutral upper atmosphere.

Particular attention is given to models of the upper atmosphere that deal with the diurnal variation and the latitudinal density dependence. The upper atmosphere is considered as essentially an ideal gas, or rather a weakly ionized plasma, where physical and chemical processes of considerable complexity take place. The final goal for the theoretical models of the upper atmosphere is to derive the time and space dependence of the physical quantities density, composition, temperature, pressure, and state of motion by theoretical considerations from basic physical assumptions. Questions of the dynamics of the upper atmosphere are discussed together with one- and two-dimensional models of the upper atmosphere, three-dimensional models, the geomagnetic effect, and the semiannual density variation.

Blum, P.↗
NASA NTRS1971

Properties of hadron matter. II - Dense baryon matter and neutron stars.

In this article we have provided certain details of a nuclear-matter computation, based on the Brueckner-Bethe-Goldstone theory of nuclear reaction, which leads to an equation of state for matter in the density region of 10 to 500 trillion g/cu cm. We also explore the possibilities that at very high baryon densities or for very short baryon separations, the net baryon-baryon interaction may be negligible so that the results of dynamical models, like the statistical bootstrap model and the dual-resonance model, may be applicable to the study of dense baryon matter. Several plausible equations of state are constructed, and their effect on the limiting mass of the neutron star is examined.

Leung, Y. C.↗
NASA NTRS2003

Turbulence in Supercritical O2/H2 and C7H16/N2 Mixing Layers

This report presents a study of numerical simulations of mixing layers developing between opposing flows of paired fluids under supercritical conditions, the purpose of the study being to elucidate chemical-species-specific aspects of turbulence. The simulations were performed for two different fluid pairs O2/H2 and C7H16/N2 at similar reduced initial pressures (reduced pressure is defined as pressure divided by critical pressure). Thermodynamically, O2/H2 behaves more nearly like an ideal mixture and has greater solubility, relative to C7H16/N2, which departs strongly from ideality. Because of a specified smaller initial density stratification, the C7H16/N2 layers exhibited greater levels of growth, global molecular mixing, and turbulence. However, smaller density gradients at the transitional state for the O2/H2 system were interpreted as indicating that locally, this system exhibits enhanced mixing as a consequence of its greater solubility and closer approach to ideality. These thermodynamic features were shown to affect entropy dissipation, which was found to be larger for O2/H2 and concentrated in high-density-gradient-magnitude regions that are distortions of the initial density-stratification boundary. In C7H16/N2, the regions of largest dissipation were found to lie in high-density-gradient-magnitude regions that result from mixing of the two fluids.

Bellan, Josette↗
NASA NTRS1992

Prediction of dislocation generation during Bridgman growth of GaAs crystals

Dislocation densities are generated in GaAs single crystals due to the excessive thermal stresses induced by temperature variations during growth. A viscoplastic material model for GaAs, which takes into account the movement and multiplication of dislocations in the plastic deformation, is developed according to Haasen's theory. The dislocation density is expressed as an internal state variable in this dynamic viscoplastic model. The deformation process is a nonlinear function of stress, strain rate, dislocation density and temperature. The dislocation density in the GaAs crystal during vertical Bridgman growth is calculated using a nonlinear finite element model. The dislocation multiplication in GaAs crystals for several temperature fields obtained from thermal modeling of both the GTE GaAs experimental data and artificially designed data are investigated.

Tsai, C. T.↗
NASA NTRS2002

Aspects of Supercritical Turbulence: Direct Numerical Simulation of O2/H2 and C7H16/N2 Temporal Mixing Layers

Results from Direct Numerical Simulations of temporal, supercritical mixing layers for two species systems are analyzed to elucidate species-specific turbulence aspects. The two species systems, O2/H2 and C7HG16/N2, have different thermodynamic characteristics; thus, although the simulations are performed at similar reduced pressure (ratio of the pressure to the critical pressure), the former system is dose to mixture ideality and has a relatively high solubility with respect to the latter, which exhibits strong departures from mixture ideality Due to the specified, smaller initial density stratification, the C7H16/N2 layers display higher growth and increased global molecular mixing as well as larger turbulence levels. However, smaller density gradients at the transitional state for the O2/H2 system indicate that on a local basis, the layer exhibits an enhanced mixing, this being attributed to the increased solubility and to mixture ideality. These thermodynamic features are shown to affect the irreversible entropy production (i.e. the dissipation), which is larger for the O2/H2 layer and is primarily concentrated in high density-gradient magnitude regions that are distortions of the initial density stratification boundary. In contrast, the regions of largest dissipation in the C7H16/N2 layer are located in high density-gradient magnitude regions resulting from the mixing of the two fluids.

Bellan, J.↗
NASA NTRS1990

The effects of nonequilibrium ionization on the radiative losses of the solar corona

The emissivity of the ions of carbon and oxygen has been recalculated for a set of solar coronal loop models with a steady state siphon flow. The ion densities were calculated from the plasma velocities, temperatures, and densities of the models, and large departures from equilibrium were found. For purposes of comparison, the emissivity was calculated with and without the approximation of ionization equilibrium. Considerable differences in the radiative loss function Lambda(T) curve between equilibrium and nonequilibrium conditions were found. The nonequilibrium Lambda(T) function was then used to solve again the steady state flow equations of the loop models. The differences in the structure of these models with respect to the models calculated adopting the Lambda(T) curve in equilibrium are discussed.

Spadaro, D.↗
NASA NTRS1986

A lumped parameter mathematical model for simulation of subsonic wind tunnels

Equations for a lumped parameter mathematical model of a subsonic wind tunnel circuit are presented. The equation state variables are internal energy, density, and mass flow rate. The circuit model is structured to allow for integration and analysis of tunnel subsystem models which provide functions such as control of altitude pressure and temperature. Thus the model provides a useful tool for investigating the transient behavior of the tunnel and control requirements. The model was applied to the proposed NASA Lewis Altitude Wind Tunnel (AWT) circuit and included transfer function representations of the tunnel supply/exhaust air and refrigeration subsystems. Both steady state and frequency response data are presented for the circuit model indicating the type of results and accuracy that can be expected from the model. Transient data for closed loop control of the tunnel and its subsystems are also presented, demonstrating the model's use as a control analysis tool.

Krosel, S. M.↗