SEARCH · Engineering Papers

Results for “DAMPER”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

All sources NASA NTRS DOE OSTI

NASA NTRS1982

Damping of thermoacoustic oscillations

A commonly encountered and troublesome problem in cryogenic systems is related to the occurrence of thermoacoustic oscillations (TAO). The oscillations are accompanied by large heat fluxes which can cause large increases in the boiloff from dewars. Such a boiloff can lead to a serious degradation in performance. It appears, therefore, highly advisable to incorporate mechanisms for damping TAO in those parts of the system where there oscillations might occur. The present investigation is concerned with the criteria for the design of such damping mechanisms. Attention is given to the theory regrading the suppression of TAO, a damper consisting of a capillary with a surge tank, and porous solid dampers.

Tward, E.↗

NASA NTRS1983

Simulation of the Galileo spacecraft axial - Delta-V algorithm

Preliminary results are presented from the analysis of the Galileo spacecraft axial delta-V algorithm. The Galileo spacecraft is a dual spin interplanetary spacecraft which will study the four Galilean moons of Jupiter as well as the Jovian environment and atmosphere. In order to achieve orbit about Jupiter and accurately deliver the probe to the planet's upper atmosphere, the Galileo spacecraft must be capable of performing many trajectory corrections or delta-V maneuvers. Twelve 10 Newton thrusters and one 400 Newton engine are utilized for this purpose. There are many maneuver modes and control algorithms available to the spacecraft. In this paper only the analysis of the axial delta-V algorithm will be discussed. The analysis consists of two parts: an analytic study and a simulation study. The analytic results are based on rigid body dynamics, while the simulation includes the first order effect of the flexible magnetometer boom and nutation damper. The simulation utilizes a program developed at JPL which allows flexible body effects to be simulated by modeling a collection of rigid bodies attached together by hinges, springs and dampers. In this preliminary study of the Galileo only two rigid bodies were used in the simulation, but many more can and will be used in the final tests. In this analysis, the algorithm appears to be working correctly and the analytic and simulation results agree very well.

Longuski, J. M.↗

NASA NTRS1987

Component response to random vibratory motion of the carrier vehicle

Two physical models of component plus supporting substructure are considered. Each model consists of a rigid body attached to a moving base by means of linear springs and viscous dampers. The second model differs from the first in that its dampers are elastically supported. The first model receives the more extensive treatment. Base motion, assumed a random translational motion parallel to a fixed axis, is prescribed only to the extent that the power spectral density (PSD) of its acceleration is given; and, as given, its plot on log-log graph paper is a series of straight line segments, each segment having an extremity in common with the adjacent segment. Closed expressions are given for the mean squares of base acceleration, base velocity, and base displacement. The component is restricted to planar motion and allowed two degrees of freedom, one translational and one rotational. Integral expressions are given for the mean squares of component response variables, the transfer functions essential to mean square computation being available via the equations of motion. Closed expressions are given for mean squares of certain of the response variables for the case wherein the base acceleration PSD is constant.

Tuell, L. P.↗

NASA NTRS1987

Analytical investigation of the dynamics of tethered constellations in Earth orbit (phase 2)

Simulation of two short distance crawling maneuvers of the elevator both with and without environmental perturbations acting upon the system is discussed. These simulation runs were performed in order to provide results useful for the interpretation of the data from the tests, on the ground, of a scaled down engineering model of the elevator. In these simulation runs the elevator crawls along the tether in accordance to the developed mirror image motion control law (MIMCL). Results from the simulation of the 4 km long maneuver run were compared to those obtained by adopting the modified hyperbolic tangent control law (MHTCL). A preprocessor was developed for setting up the initial conditions of a tethered system with L platforms, M longitudinal dampers, and N lumped masses (platforms plus tether beads). A short test run of the 4-platform system with 3 longitudinal dampers and 10 lumper mass without any perturbation acting upon the system is illustrated. In support of the Tether Applications Working Group, SAO is preparing a catalog of tether simulations, has prepared a set of simulator test cases, obtained results from SKYHOOK, and solicited results from simulators at other institutions, and prepared a paper on a specific analytic solution.

Lorenzini, Enrico C.↗

NASA NTRS1988

Analytical investigation of the dynamics of tethered constellations in earth orbit

This Quarterly Report on Tethering in Earth Orbit deals with three topics: (1) Investigation of the propagation of longitudinal and transverse waves along the upper tether. Specifically, the upper tether is modeled as three massive platforms connected by two perfectly elastic continua (tether segments). The tether attachment point to the station is assumed to vibrate both longitudinally and transversely at a given frequency. Longitudinal and transverse waves propagate along the tethers affecting the acceleration levels at the elevator and at the upper platform. The displacement and acceleration frequency-response functions at the elevator and at the upper platform are computed for both longitudinal and transverse waves. An analysis to optimize the damping time of the longitudinal dampers is also carried out in order to select optimal parameters. The analytical evaluation of the performance of tuned vs. detuned longitudinal dampers is also part of this analysis. (2) The use of the Shuttle primary Reaction Control System (RCS) thrusters for blowing away a recoiling broken tether is discussed. A microcomputer system was set up to support this operation. (3) Most of the effort in the tether plasma physics study was devoted to software development. A particle simulation code has been integrated into the Macintosh II computer system and will be utilized for studying the physics of hollow cathodes.

Lorenzini, Enrico C.↗

NASA NTRS1988

Advanced piloted aircraft flight control system design methodology. Volume 2: The FCX flight control design expert system

The development of a comprehensive and electric methodology for conceptual and preliminary design of flight control systems is presented and illustrated. The methodology is focused on the design states starting with the layout of system requirements and ending when some viable competing system architectures (feedback control structures) are defined. The approach is centered on the human pilot and the aircraft as both the sources of, and the keys to the solution of, many flight control problems. The methodology relies heavily on computational procedures which are highly interactive with the design engineer. To maximize effectiveness, these techniques, as selected and modified to be used together in the methodology, form a cadre of computational tools specifically tailored for integrated flight control system preliminary design purposes. The FCX expert system as presently developed is only a limited prototype capable of supporting basic lateral-directional FCS design activities related to the design example used. FCX presently supports design of only one FCS architecture (yaw damper plus roll damper) and the rules are largely focused on Class IV (highly maneuverable) aircraft. Despite this limited scope, the major elements which appear necessary for application of knowledge-based software concepts to flight control design were assembled and thus FCX represents a prototype which can be tested, critiqued and evolved in an ongoing process of development.

Myers, Thomas T.↗

NASA NTRS1989

Experimental investigation into passive damping enhancement for space structures

This work presents experiments which were conducted to verify kinetic and strain energy damping enhancement schemes for large/precision space structures. Two types of damping mechanisms were applied to a 5 meter long, 10 bay aluminum box truss with a quasi free-free three-dimensional suspension. Tuneable proof mass dampers (PMDs) were implemented with space realizable linear electromechanical drivers. Tuneable piezoelectric truss members were designed and constructed for the demonstration of resonant shunted piezoelectric damping concepts. The truss damping was measured and compared to analytical predictions obtained from a frequency domain system modeling technique. The proof mass damper implementation was found to increase first mode damping from 0.6 percent of critical to 6.4 percent of critical with a system mass increase of 2.7 percent. The resonant shunted piezoelectrics increased first mode damping to 6.0 percent with a similar mass penalty.

Hagood, Nesbitt W.↗

NASA NTRS1990

Ultrasonic Abrasive Removal Of EDM Recast

Ultrasonic abrasive process removes layer of recast material generated during electrical-discharge machining (EDM) of damper pocket on turbine blade. Form-fitted tool vibrated ultrasonically in damper pocket from which material removed. Vibrations activate abrasive in pocket. Amount of material removed controlled precisely.

Mandel, Johnny L.↗

NASA NTRS1991

Docking System Would Accommodate Misalignments

Conceptual docking system absorbs kinetic energy along each of three orthogonal directions. Accommodates large misalignments between docking objects. Lightweight system consists of probe on one of two docking objects and drogue on other object. Probe contains latching mechanism; pitch, roll, and yaw dampers; and centering and rigidizing mechanisms. Three eddy-current dampers absorb energy of motion along orthogonal directions, bringing docking objects to smooth stop. Conceived for docking Space Shuttle in Space Station, system useful in other applications in which large moving object must be aligned with and joined to another - such as, cranes, robots, and fuel or material-loading lines.

Ajemian, Rasmik↗

NASA NTRS1990

Aircraft interior noise reduction by alternate resonance tuning

The focus is on a noise control method which considers aircraft fuselages lined with panels alternately tuned to frequencies above and below the frequency that must be attenuated. An interior noise reduction called alternate resonance tuning (ART) is described both theoretically and experimentally. Problems dealing with tuning single paneled wall structures for optimum noise reduction using the ART methodology are presented, and three theoretical problems are analyzed. The first analysis is a three dimensional, full acoustic solution for tuning a panel wall composed of repeating sections with four different panel tunings within that section, where the panels are modeled as idealized spring-mass-damper systems. The second analysis is a two dimensional, full acoustic solution for a panel geometry influenced by the effect of a propagating external pressure field such as that which might be associated with propeller passage by a fuselage. To reduce the analysis complexity, idealized spring-mass-damper panels are again employed. The final theoretical analysis presents the general four panel problem with real panel sections, where the effect of higher structural modes is discussed. Results from an experimental program highlight real applications of the ART concept and show the effectiveness of the tuning on real structures.

Gottwald, James A.↗

NASA NTRS1991

A case study for the real-time experimental evaluation of the VIPER microprocessor

An experiment to evaluate the applicability of the Verifiable Integrated Processor for Enhanced Reliability (VIPER) microprocessor to real time control is described. The VIPER microprocessor was invented by the Royal Signals and Radar Establishment (RSRE), U.K., and is an example of the use of formal mathematical methods for developing electronic digital systems with a high degree of assurance on the system design and implementation correctness. The experiment consisted of selecting a control law, writing the control law algorithm for the VIPER processor, and providing real time, dynamic inputs into the processor and monitoring the outputs. The control law selected and coded for the VIPER processor was the yaw damper function of an automatic landing program for a 737 aircraft. The mechanisms for interfacing the VIPER Single Board Computer to the VAX host are described. Results include run time experiences, performance evaluation, and comparison of VIPER and FORTRAN yaw damper algorithm output for accuracy estimation.

Carreno, Victor A.↗

NASA NTRS1992

Integrated control-structure design of the JPL phase B testbed

Structure and damper optimization problems driven by control objective metrics are developed for the optimal design of a testbed structure emulating a spaceborne interferometer. The structure optimization problem uses a multiobjective criterion to generate a family of optimized design that allows trades to be made between the competing objectives of minimizing structural mass and maximizing disturbance attenuation. The damper optimization problems focus on the placement and tuning of viscous elements to maximally damp selected modes of the testbed structure. The optimization techniques are verified on a large model of the testbed.

Milman, M.↗

NASA NTRS1992

Determination of robust stability margin for second-order systems

Robust stabilization of uncertain systems has been extensively investigated and the stability test for the whole set of uncertain parameters has been reduced to a finite number of test points, four points for the characteristic polynomial with independent coefficients. As a result the robust stability margin can be determined using a reasonable amount of computation. It is impossible to apply the results of the test to a practical system as the coefficients of the characteristic polynomial for a physical system are usually functions of uncertain parameters. However, many physical systems may be represented by a second-order mass-spring-damper system with a special multilinear form in its characteristic polynomial. This paper investigates second-order mass-spring-damper systems and the reduction of the number of test points. It is shown that such a system with arbritrary compensators always has a multilinear characteristic polynomial. It is also shown that a line in the two-dimensional parameter space forms the boundary after the mapping of a multilinear characteristic polynomial and this interior extreme line forms a conic curve in the complex plane. The boundary of uncertain domain for a multilinear polynomial with two uncertainty parameters can be determined analytically using this curve, and the four sides image of a square of the uncertain parameter. Therefore, the stability margin may be determined by checking the intersections of the boundary with the zero point. A similar procedure can be used for second-order systems with more than two uncertainty parameters when parameter optimization is used in determining the boundary.

Chuang, C.-H.↗

NASA NTRS1992

Joint Langley Research Center/Jet Propulsion Laboratory CSI experiment

This paper describes a joint Control Structure Interaction (CSI) experiment in which Jet Propulsion Laboratory (JPL) damping devices were incorporated into the Langley Research Center (LaRC) Phase 0 Testbed. The goals of the effort were twofold: (1) test the effectiveness of the JPL structural damping methods in a new structure and (2) assess the feasibility of combining JPL local control methods with the LaRC multiple input multiple output global control methods. Six dampers (2 piezoelectric active members, 4 viscous dampers), placed in three different regions of the structure, produced up to 26 dB attenuation in target modes. The combined control strategy in which the JPL damping methods contributed local control action and the LaRC control scheme provided global control action, produced and overall control scheme with increased stability margins and improved performance. This paper presents an overview of the technologies contributed from the two centers, the strategies used to combine them, and results demonstrating the success of the damping and cooperative control efforts.

Neat, Gregory W.↗

NASA NTRS1993

A layered approach to structural control system design for the JPL phase B testbed

This paper describes our efforts in structural control experiments for a flexible precision structure using both passive and active control. Specifically, a layered structural control approach utilizing passive viscous dampers, colocated and noncolocated active control is used. The passive dampers and active colocated control loops are used to enhance stability and robustness and the noncolocated multivariable controller is designed with respect to a partially controlled structure to further improve the performance. Our approach to the multivariable design problem requires not only a state space model description of the plant, but also an accompanying uncertainty model. To support the multivariable robust control design development, a significant effort in system identification was undertaken. The process of identification and identified results are discussed. Noncolocated controllers are designed using the H(infinity)/mu-synthesis methodology. The order of the controller is typically large, hence, model reduction is performed for practical digital implementation on a real-time control system developed at JPL. Finally, experimental results are presented and some of lessons are discussed.

Chu, Cheng-Chih↗

NASA NTRS1994

Rotordynamic Instability Problems in High-Performance Turbomachinery, 1993

The first rotordynamics workshop proceedings (NASA CP-2133, 1980) emphasized a feeling of uncertainty in predicting the stability of characteristics of high-performance turbomachinery. In the second workshop proceedings (NASA CP-2250, 1982) these uncertainties were reduced through programs established to systematically resolve problems, with emphasis on experimental validation of the forces that influence rotordynamics. In the third proceedings (NASA CP-2338, 1984) many programs for predicting or measuring forces and force coefficients in high-performance turbomachinery produced results. Data became available for designing new machines with enhanced stability characteristics or for upgrading existing machines. In the fourth proceedings (NASA CP-2443, 1986) there emerged trends toward a more unified view of rotordynamic instability problems and several encouraging new analytical developments. The fifth workshop (NASA CP-3026, 1988) supported the continuing trend toward a unified view with several new developments in the design and manufacture of new turbomachineries with enhanced stability characteristics along with new data and associated numerical/theoretical results. The sixth workshop report (NASA CP-3 I 22, 1990) field experience and experimental results, and expanded the use of computational and control techniques with integration of damper, bearing, and eccentric seal operation results. The present workshop continues to report field experiences, numerical, theoretical, and experimental results and control methods for seals, bearings, and dampers with some attention given to variable thermo physical properties and turbulence measurements, and introduction of two-phase flow results. The intent of the workshop and this proceedings is to provide a continuing impetus for an understanding and resolution of these problems.

Instabilities↗

NASA NTRS1994

Rotor dynamic behaviour of a high-speed oil-free motor compressor with a rigid coupling supported on four radial magnetic bearings

The combination of a high-speed motor, dry gas seals, and magnetic bearings realized in this unit facilitates the elimination of oil. The motor is coupled with a quill shaft to the compressor. This yields higher natural frequencies of the rotor than with the use of a diaphragm coupling and helps to maintain a sufficient margin of the maximum speed to the frequency of the second compressor bending mode. However, the controller of each bearing then has to take the combined modes of both machines into account. The requirements for the controller to ensure stability and sufficient damping of all critical speeds are designed and compared with the implemented controller. The calculated closed loop behavior was confirmed experimentally, except the stability of some higher modes due to slight frequency deviations of the rotor model to the actual rotor. The influence of a mechanical damper as a device to provide additional damping to high models is demonstrated theoretically. After all, it was not necessary to install the damper, since all modes cold be stabilized by the controller.

Schmied, J.↗

NASA NTRS1993

An electrorheologically controlled semi-active landing gear

This study is to explore the application of electrorheology (ER) to the real-time control of damping forces that are transmitted through the nose landing gear for an F-106B aircraft. The main part of the landing gear is a strut that consists of a pneumatic spring and an ER controlled damper that is situatted on the strut centerline and applies a force directly opposing the vertical displacement of the nose wheel. The damping element rotates in response to strut displacement, employing a co-axial arrangement of stator and rotor plates connected to the opposing electrodes in the control circuit. The vertical displacement is conveted into rotation of the damper through a screw-nut mechanism. The ER fluid between the electrodes is thus engaged in shear along circumferential lines of action. This design results in a fast time response and a high ratio of strut forces achieved under Er-vs. zero-field control. Compact size and simplicity in fabrication are also attained. The analysis shows that when using an ER fluid of a yield stress of 7kPa, the energy absorption efficiency of the landing gear can reach almost 100% at various sink rates.

Lou, Zheng↗