Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Composite particles”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Effect of growth dynamics on the structural, photophysical and pseudocapacitance properties of famatinite copper antimony sulphide colloidal nanostructures (including nanosheets)

Facile phase selective synthesis of copper antimony sulphide (CAS) nanostructures is important because of their tunable photoconductive and electrochemical properties. In this study, off-stoichiometric famatinite phase CAS (fCAS) quasi-spherical and quasi-hexagonal colloidal nanostructures (including nanosheets) of sizes, 2.4–18.0 nm were grown under variable conditions of temperature (60–200 °C), time and oleylamine capping ligand concentration using copper(II) acetylacetonate and antimony(III) diethyldithiocarbamate precursors. Data from powder X-ray diffraction, Raman spectroscopy and high-resolution scanning/transmission electron microscopy confirm the tetragonal structure of the famatinite phase. X-ray photoelectron spectroscopy, transmission electron microscopy and scanning electron microscopy-energy dispersive X-ray spectroscopy data suggest a correlation of particle size, morphology and composition of the off-stoichiometric fCAS nanostructures with growth temperature and time, and oleylamine concentration. The off-stoichiometric Cu 3-a Sb 1+b S 4±c (a, b, c – mole fractions) nanostructures being severely copper-deficient and antimony-rich, exhibit shallow-lying acceptor copper vacancy states, deep-lying donor states of antimony interstitials, sulphur vacancies and antimony-copper antisites and shallow-lying acceptor surface trapping states. Further, these electronic states are likely implicated in tunable UV-visible absorption and bandgaps between 2.3 and 2.8 eV, and broad visible-NIR photoluminescence with fast recombination of radiative lifetimes between 0.2 and 6.2 ns, confirmed from absorption, steady-state and time-resolved photoluminescence spectroscopies. Additionally, cyclic voltammetry and electrochemical impedance spectroscopy confirm that electrodes of the fCAS nanostructures display slightly variable pseudocapacitance of charge-storage primarily via possible sodium ion intercalation with a high specific capacitance of ~84 F g -1 obtained at a scan rate of 5 mV s -1 . Overall, these results show the influence of composition, in particular point defects, phase quality and morphology on the optical and pseudocapacitance properties of fCAS nanostructures, suitable as solar absorbers or electrodes for energy storage devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Valorization of consolidated bioprocessing residues for bioplastics

This study demonstrates an organic solvent-free processing strategy to valorize consolidated bioprocessing (CBP) residues, from switchgrass and poplar biomass, into functional poly(butylene succinate) (PBS)-based biocomposites using high-shear homogenization (HSH). HSH transformed the switchgrass and poplar CBP residues (CBP-R) into fine, uniformly distributed particles and microfibers. The composites of PBS with homogenized switchgrass residues (H-CBP-R-SG) or homogenized poplar residues (H-CBP-R-P) at a 70/30 weight ratio exhibited improved processability and mechanical integrity, with the Young's modulus for the PBS/H-CBP-R-SG and PBS/H-CBP-R-P nearly doubling to 0.66 ± 0.07 GPa and 0.65 ± 0.04 GPa, respectively, compared to neat PBS (0.36 ± 0.02 GPa). Dynamic Mechanical Analysis (DMA) reveals a significant suppression of the tan δ peak magnitude, indicating that HSH-mediated physical activation facilitates stress transfer in composites typical of covalent chemical grafting systems. While the transition to a stiffness-dominated profile reduces ductility, the resulting composites exhibit the dimensional stability and resistance to thermal warping required for high-fidelity FDM 3D printing and injection molding. Beyond material performance, comprehensive techno-economic analysis (TEA) and life cycle assessment (LCA) confirmed that diverting CBP residues into composite products can improve the economic viability of the biorefinery without substantially increasing biorefinery global warming potential (GWP). At a 30 wt% blend ratio, incorporating residuals into PBS yielded a minimum selling price for the composite of $\$4.07$ per kg compared to the conventional bioplastic price of $\$5.00$ per kg. This approach aligns with circular bioeconomy principles by converting waste streams into value-added products. Furthermore, this innovative strategy addresses key challenges in bioplastic development, including cost, compatibility, and performance, while simultaneously advancing waste minimization strategies for sustainable manufacturing systems.

09 BIOMASS FUELS↗
DOE OSTI2020

Density functional theory calculation of helium segregation and decohesion effect in W110/Ni111 interphase boundary

Density functional theory (DFT) is employed to study the preferential distribution and decohesion effect of He in a W-NiFe composite consisting of W particles embedded in an Ni-based solid solution matrix. A slab containing {110}<100>W//{111}<110>Ni interface is employed as a surrogate model for the W-NiFe system. Firstly, the fracture energy of the W/Ni interphase boundary (IB) (4.37 J/m 2 ) is higher than the cleavage energy of Ni{111} (3.82 J/m^2) and lower than the cleavage energy of W{110} (6.60 J/m 2 ). The comparison shows that the cohesion of the IB is stronger than the Ni{111} planes that are away from the IB. However, the cohesion between the Ni{111} planes adjacent to the IB is found to be the weakest in this system, with a cleavage energy of 3.11 J/m 2 . Subsequently, formation energy of He is calculated in the Ni slab, W slab, and various interstitial sites in the IB. The DFT calculations show that He is significantly more stable in Ni than in W, by about 1.75 eV. Interestingly, He does not prefer to segregate at the IB as compared to bulk Ni. Nevertheless, it prefers to segregate to the region between the Ni{111} planes adjacent to the IB, and decreases the cohesion of the already weakest region. Based on an estimated amount of He gas production in 5 years under first wall neutron irradiation (neutron flux of 1.04x10 15 n/cm 2 /s), the He will decrease the cleavage energy of the weakest region by 21.2%, 15.4%, and 12.2% at 800, 1000, and 1200 C, respectively.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2024

Optimizing protic ionic liquid electrolyte for pre-intercalated Ti 3 C 2 T x MXene supercapacitor electrodes

Electrical double-layer capacitors (EDLCs) are of increasing importance in energy storage from renewable sources. The properties of the electrode and electrolyte materials influence the energy and power densities of EDLCs. We examined the specific capacitance and ion dynamics of a protic ionic liquid confined in pre-intercalated Ti 3 C 2 T x MXene. Our electrochemical measurements demonstrated that the creation of a protic ionic liquid, 1-butyl-3-H-imidazolium bis(trifluoromethanesulfonyl)imide (BuIMH-NTf2), using a mixture of ionic liquid, 1-butyl imidazole (BuIM), and salt, bis(trifluoromethanesulfonyl)imide (HNTf2), in a ratio of 0.8:0.2 led to the optimal capacitance. Remarkably, quasi-elastic neutron scattering measurements revealed increased particle mobility at this composition, attributed to the more efficient accumulation of BuIMH + on the electrode surface. This deposit of additional ions results in fewer BuIM molecules away from the surface, enhancing their mobility due to reduced crowding. This composition-dependent electrochemical behavior will guide the formulation of more efficient protic ionic liquid systems, enabling faster ion transport in energy storage devices.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Elucidating Arsenic and Selenium Speciation in Coal Fly Ashes

Coal fly ash (CFA) is produced during the coal combustion process and contains trace elements (<100 ppm) including selenium (Se) and arsenic (As), both detrimental for environmental and human health. Existing management strategies for CFAs involve disposal in landfills and ash ponds, as well as beneficial usage in other applications such as in concrete. Both the direct disposal and beneficial usage of CFA raise concerns for environmental hazards due to the potential leaching of Se and As. CFAs were classified as reusable material by the U.S. Environmental Protection Agency (EPA) with the first federal regulation (Disposal of Coal Combustion Residuals from Electric Utilities, CCR) for its disposal established six years ago. During coal combustion process, parameters such as furnace firing type, emissions controls, coal rank, use of additives, and particulate matter controls, could contribute to significant variability in As/Se concentrations and their speciation. Although there have been a handful of studies on As/Se speciation on small sets of samples, they do not fully represent the current state of coal-fired electrical generating units. Little information exists on the detailed speciation (e.g. oxidation state, complexation state) of As/Se in large set of fly ash samples. To better investigate the role of the potential contributing parameters, a large-scale survey study with representative samples of typical coal source and combustion conditions is highly desired. The overall goal of this research is to systematically characterize As and Se speciation of representative coal fly ash samples using state-of-the-art synchrotron based spectroscopic and microscopic techniques, in order to develop a correlation between coal source/type, operation condition, As/Se speciation, and As/Se mobility. A detailed survey study was conducted documenting the current state-of-knowledge on fossil power generating units as a function of coal type/source, operating conditions, environmental control systems, additive use, and fly ash handling methods. Based on this survey, a matrix of fly ash samples representing a range of conditions were chosen and collected. The collected ash samples were analyzed for bulk characteristics such as elemental composition, microstructure, chemical and mineralogical composition, surface area, and particle size distribution. State-of-the-art synchrotron X-ray microscopy and spectroscopy techniques were applied to reveal the molecular scale speciation information of As and Se, such as oxidation state, association with other elements/minerals, and complexation states.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2025

Real-Time Characterization of Salt Aerosols Generated from Static and Sparged Molten Salt

The formation of radionuclide-bearing aerosols in the respirable size range has the potential to significantly influence offsite dose consequences and is, therefore, an important consideration in nuclear facility safety assessments. Molten salt reactor (MSR) developers will likely need to demonstrate an understanding of the conditions under which radionuclide-bearing aerosols may be generated from their reactor under normal operating and accident conditions, as well as the characteristics and transport behavior of these aerosols, to demonstrate to the U.S. Nuclear Regulatory Commission (NRC) that the facility can be operated safely. Recent reviews of the literature identified a lack of experimental data describing the mechanisms of formation and properties (size, concentration, and composition) of salt aerosol particles that are produced from molten salts. Experiments that identify the conditions that lead to radionuclide-bearing salt aerosol releases and quantify the characteristics of salt aerosols formed by different mechanisms are high-priority needs to support MSR licensing. This report describes tests that were conducted within the Argonne Salt Aerosol Test Stand (a sealed vessel and measurement system) to generate salt aerosols from static and sparged molten salts and measure their size and concentration in real-time. The results provide insight into salt aerosol formation by the vapor condensation and bubble bursting mechanisms and inform the potential radiological consequences of aerosol formation from molten fuel salt. Videos of the salt surface were taken during salt sparge tests to observe surface bubble behavior. The data in this report can be used to develop mechanistic source term and accident progression models for MSRs. The real-time salt aerosol characterization technique used in this study will be employed in future integral effects tests that are conducted at an engineering scale to simulate realistic MSR accidents and in future separate effects tests to address additional variables that may impact salt aerosol characteristics (e.g., presence of fission products in salt and humidity in atmosphere).

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2021

Conductive polymer emulsion

The present invention provides for an emulsion comprising solid particles of a single composition, or a mixture thereof, comprising a polymer comprising one monomer of an aryl methacrylate, or a mixture thereof, co-polymerized with a monomer of an alkyl methacrylate, or a mixture thereof; wherein Ar is an aryl group and R is an alkyl group, and n:m has a ratio of from about 0:100 to about 100:0.

Liu, Gao↗
DOE OSTI2023

Lignin dispersion composition and its use in stabilizing emulsions

A lignin dispersion composition comprising spherical lignin particles dispersed in an aqueous medium, wherein the spherical lignin particles have a size exclusively within a range of 100 nm to 5 microns. Also described herein is a method of producing the lignin dispersion, by: (i) dissolving lignin in an organic solvent substantially devoid of water yet miscible with water to result in a solution of the lignin in the organic solvent; and (ii) producing the lignin dispersion by dialyzing the solution of the lignin with water until substantially all of the organic solvent is replaced with water with simultaneous formation of spherical lignin particles dispersed in the water. Also described herein is a method for stabilizing an emulsion by intimately mixing the emulsion with the lignin dispersion. Also described herein is a hierarchical assembly of porous microparticles produced by mixing the lignin dispersion with an emulsion and an amphiphilic block copolymer.

Naskar, Amit K.↗
DOE OSTI2023

X-Ray Absorption Spectroscopy (XAS): Surface Structural Determination of Alloy Nanoparticles

In catalysis since reactions occur on the surface of nanoparticles (NP), it is essential to determine the composition of this structure, rather than that of the nanoparticles, since the two may be, and often are, different. Conventional techniques including X-ray absorption spectroscopy (XAS) and X-ray diffraction (XRD) are powerful techniques, but these data reflect the average composition of the entire particle. In this chapter, we introduce the method of EXAFS analysis, which isolates the surface atoms of nanoparticles based on its sensitivity to chemical reactions, specifically surface oxidation. As shown in our case studies, if the surface of a Pt-based nanoparticle is contacted by air at room temperature, the surface will selectively oxidize, resulting in the loss of Pt-Pt and Pt-M bonds to the formation of Pt-O bonds. The difference between the completely reduced and surface-oxidized nanoparticle allows for the isolation of signal from the catalytic surface. Although these examples highlight Pt alloys, similar analysis is also possible for other group 8 and IB bimetallic catalysts.

Zhang, Guanghui↗
DOE OSTI2023

Cathode active materials for secondary batteries

A cathode active material of formula LiNi x Mn y Al z M α O 2-ε B ε or NaNi x′ Mn y′ Al z′ M′ α′ O 2-ε′ B ε′ , wherein M is a combination of Ti, and Mg; M′ is Ti, Mg, or a combination of thereof; B is selected from the group of F, S, Se, or Cl; 0.8<x<1, 0<y<0.2, 0<z≤0.2, 0≤α≤0.2, 0≤ε≤0.1, 0.5<x′<1, 0<y′<0.5, 0<z′≤0.2, 0≤α′≤0.2, and 0≤ε′≤0.1. The particle is a single crystal, a single particle, or a secondary particle comprising a plurality of primary particles; and the particle is a uniform composition or a concentration gradient composition.

Liu, Tongchao↗
DOE OSTI2025

Time at Temperature Abstract and Intern Poster

Current NRC regulations for BWR operations dictate that any occurrence reaching the point of Departure from Nucleate Boiling (DNB) disqualifies the use of the fuel rod for further reactor operation. That criteria does not account for duration of rate of the power increase, the corresponding effects on material properties or rewetting that may occur. Previous Anticipated Operational Occurrences (AOOs) show short durations power increase that may require limited amounts of heat removal. Industrial experience has shown evidence that fuel can reach dryout yet continue to safely operate in regular reactor conditions. The gap in research into such occurrences is the motivation for a series of experiments, including this current work. Time-at-Temperature experiments aim to identify and characterize the microstructural changes in Zircaloy-2 under oxygen-free high temperatures. This work uses the FlashDSC instrument to rapidly ramp up and down the temperature of a focus ion beam (FIB) prepared large area lift-out (LALO) of Zircaloy-2 at a rate of 10,000 K/s to desired values. The focus is to characterize the microstructure evolution, if any, of Zircaloy-2 that may impact its performance under typical BWR conditions. This characterization includes analyzing grain structure and size, secondary phase particle (SPPs) size, shape, composition, and location using Transmission Electron Microscopy (TEM). Further data collection and analysis is in progress including diffraction pattern indexing and 4D STEM processing. While current results focus on the testing and characterizing unirradiated material, future plans include expansion to irradiated material to explore the effects of rapid transition rates seen in DNB and dryout conditions on irradiationg damage and defect annealing.

36 - MATERIALS SCIENCE↗
DOE OSTI2022

Particle phase-state variability in the North Atlantic free troposphere during summertime is determined by atmospheric transport patterns and sources

Abstract. Free tropospheric aerosol particles have important but poorly constrained climate effects due to transformations of their physicochemical properties during long-range transport. In this study, we investigate the chemical composition and provide an overview of the phase states of individual particles that have undergone long-range transport over the North Atlantic Ocean in June and July 2014, 2015, and 2017 to the Observatory of Mount Pico (OMP) in the Azores. The OMP is an ideal site for studying long-range-transported free tropospheric particles because local emissions have a negligible influence and contributions from the boundary layer are rare. We used the FLEXible PARTicle Lagrangian particle dispersion model (FLEXPART) to determine the origins and transport trajectories of sampled air masses and found that most of them originated from North America and recirculated over the North Atlantic Ocean. The FLEXPART analysis showed that the sampled air masses were highly aged (average plume age >10 d). Size-resolved chemical compositions of individual particles were probed using computer-controlled scanning electron microscopy with an energy-dispersive X-ray spectrometer (CCSEM-EDX) and scanning transmission X-ray microscopy with near-edge X-ray absorption fine structure spectroscopy (STXM-NEXAFS). CCSEM-EDX results showed that the most abundant particle types were carbonaceous (∼ 29.9 % to 82.0 %), sea salt (∼ 0.3 % to 31.6 %), and sea salt with sulfate (∼ 2.4 % to 31.5 %). We used a tilted stage interfaced within an environmental scanning electron microscope (ESEM) to determine the phase states of individual submicron particles. We found that most particles (∼ 47 % to 99 %) were in the liquid state at the time of collection due to inorganic inclusions. Moreover, we also observed substantial fractions of solid and semisolid particles (∼ 0 % to 30 % and ∼ 1 % to 42 %, respectively) during different transport patterns and events, reflecting the particles' phase-state variability for different atmospheric transport events and sources. Combining phase state measurements with FLEXPART CO tracer analysis, we found that wildfire-influenced plumes can result in particles with a wide range of viscosities after long-range transport in the free troposphere. We also used temperature and RH values extracted from the Global Forecast System (GFS) along the FLEXPART-simulated path to predict the phase state of the particles during transport and found that neglecting internal mixing with inorganics would lead to an overestimation of the viscosity of free tropospheric particles. Our findings warrant future investigation aiming at the quantitative assessment of the influence of internal mixing on the phase states of the individual particles. This study also provides insights into the chemical composition and phase state of free tropospheric particles, which can help models to reduce uncertainties about the effects of ambient aerosol particles on climate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Laser-driven ionization mechanisms of aluminum for single particle aerosol mass spectrometry

Single particle aerosol mass spectrometry (SPAMS), an analytical technique for measuring the size and composition of individual micron-scale particles, is capable of analyzing atmospheric pollutants and bioaerosols much more efficiently and with more detail than conventional methods which require the collection of particles onto filters for analysis in the laboratory. Despite SPAMS’ demonstrated capabilities, the primary mechanisms of ionization are not fully understood, which creates challenges in optimizing and interpreting SPAMS signals. In this paper, we present a well-stirred reactor model for the reactions involved with the laser-induced vaporization and ionization of an individual particle. The SPAMS conditions modeled in this paper include a 248 nm laser which is pulsed for 8 ns to vaporize and ionize each particle in vacuum. The ionization of 1 μm, spherical Al particles was studied by approximating them with a 0-dimensional plasma chemistry model. The primary mechanism of absorption of the 248 nm photons was pressure-broadened direct photoexcitation to Al(y 2 D). Atoms in this highly excited state then undergo superelastic collisions with electrons, heating the electrons and populating the lower energy excited states. We found that the primary ionization mechanism is electron impact ionization of various excited state Al atoms, especially Al(y 2 D). Because the gas expands rapidly into vacuum, its temperature decreases rapidly. The rate of three-body recombination (e - + e - + Al + → Al + e - ) increases at low temperature, and most of the electrons and ions produced recombine within several μs of the laser pulse. The importance of the direct photoexcitation indicates that the relative peak heights of different elements in SPAMS mass spectra may be sensitive to the available photoexcitation transitions. We also discuss the effects of laser intensity, particle diameter, and expansion dynamics.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

Use of Transmission Electron Microscopy for Analysis of Aerosol Particles and Strategies for Imaging Fragile Particles

For over 25 years, transmission electron microscopy (TEM) has provided a method for the study of aerosol particles with sizes from below the optical diffraction limit to several microns, resolving the particles as well as smaller features. The wide use of this technique to study aerosol particles has contributed important insights about environmental aerosol particle samples and model atmospheric systems. TEM produces an image that is a 2D projection of aerosol particles that have been impacted onto grids and, through associated techniques and spectroscopies, can contribute additional information such as the determination of elemental composition, crystal structure, and 3D particle structures. Soot, mineral dust, and organic/inorganic particles have all been analyzed using TEM and spectroscopic techniques. TEM, however, has limitations that are important to understand when interpreting data including the ability of the electron beam to damage and thereby change the structure and shape of particles, especially in the case of particles composed of organic compounds and salts. In this paper, we concentrate on the breadth of studies that have used TEM as the primary analysis technique. Another focus is on common issues with TEM and cryogenic-TEM. Insights for new users on best practices for fragile particles, that is, particles that are easily susceptible to damage from the electron beam, with this technique are discussed. Tips for readers on interpreting and evaluating the quality and accuracy of TEM data in the literature are also provided and explained.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Development of Heterogeneous Ice Nucleation Rate Coefficient Parameterizations From Ambient Measurements

Ice nucleating particles (INPs) are a rare subset of particles that can have an outsized impact relative to their prevalence. To simulate INP variability, models require parameterizations for the most important sources of INPs. Most parameterizations in the literature were developed from laboratory experiments that used proxies for ambient particles. Whether these laboratory models effectively represent ambient aerosol is still not well understood and parameterizations developed from field measurements may be more atmospherically relevant. Expanding on previous work in which we used an ice chamber and a single-particle mass spectrometer (SPMS) to characterize INP composition, we calculate heterogeneous ice nucleation rate coefficients for ambient particles. We find good agreement between our dust and previous measurements of airborne dust. We also use a Monte Carlo approach to assess the relative contribution of each measurement to the uncertainty and find that the biggest source is the sampling efficiency of the SPMS.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Formation of stable submicron peptide or protein particles by thin film freezing

The present invention includes compositions and methods for preparing micron-sized or submicron-sized particles by dissolving a water soluble effective ingredient in one or more solvents; spraying or dripping droplets solvent such that the effective ingredient is exposed to a vapor-liquid interface of less than 50, 100, 150, 200, 250, 200, 400 or 500 cm−1 area/volume to, e.g., increase protein stability; and contacting the droplet with a freezing surface that has a temperature differential of at least 30° C. between the droplet and the surface, wherein the surface freezes the droplet into a thin film with a thickness of less than 500 micrometers and a surface area to volume between 25 to 500 cm−1.

Johnston, Keith P.↗
DOE OSTI2023

Formation of stable submicron peptide or protein particles by thin film freezing

The present invention includes compositions and methods for preparing micron-sized or submicron-sized particles by dissolving a water soluble effective ingredient in one or more solvents; spraying or dripping droplets solvent such that the effective ingredient is exposed to a vapor-liquid interface of less than 50, 100, 150, 200, 250, 200, 400 or 500 cm −1 area/volume to, e.g., increase protein stability; and contacting the droplet with a freezing surface that has a temperature differential of at least 30° C. between the droplet and the surface, wherein the surface freezes the droplet into a thin film with a thickness of less than 500 micrometers and a surface area to volume between 25 to 500 cm −1 .

Johnston, Keith P.↗