SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The line widths, pressure-induced shifts, and center frequency of the J = 1-0, K = 0 phosphine transition at 266.9 GHz have been determined. The widths and shifts are reported for collisions with phosphine, H2, and He.
On the basis of a spectral line shape computation and radiative transfer calculations, it is shown that the unexplained, diminutive structures seen in the Voyager IRIS Jovian spectra near the hydrogen S0(0) and S0(1) rotational frequencies are due to bound-free transitions involving hydrogen dimers. The absorption intensities of these transitions, as well as of the collision-induced background, are given. These dimer structures may possibly prove to be useful for determining the helium/hydrogen ratio and the para-hydrogen fraction in the atmospheres of the outer planets.
The frequency distributions of the first six Lyman lines of hydrogenlike carbon, oxygen, neon, magnesium, aluminum, and silicon ions broadened by the local fields of both ions and electrons are calculated for dense plasmas. The electron collisions are treated by an impact theory allowing (approximately) for level splittings caused by the ion fields, finite duration of the collisions, and screening of the electron fields. These calculations are fully quantum mechanical and include the full Coulomb interaction. Ion effects are calculated in the quasistatic, linear-Stark-effect approximation, using distribution functions of Hooper and Tighe which include correlation and shielding effects. Theoretical uncertainties from the various approximations are estimated, and the scaling of the profiles with density, temperature, and nuclear charge is discussed. A correction for the effects caused by low-frequency field fluctuations is suggested.
Radio-frequency (RF) carpets with ultra-fine pitches are examined for ion transport in gases at atmospheric pressures and above. We develop new analytic and computational methods for modeling RF ion transport at densities where dynamics are strongly influenced by buffer gas collisions. An analytic description of levitating and sweeping forces from phased arrays is obtained, then thermodynamic and kinetic principles are used to calculate ion loss rates in the presence of collisions. This methodology is validated against detailed microscopic SIMION simulations. We then explore a parameter space of special interest for neutrinoless double beta decay experiments: transport of barium ions in xenon at pressures from 1 to 10 bar. Our computations account for molecular ion formation and pressure dependent mobility as well as finite temperature effects. We discuss the challenges associated with achieving suitable operating conditions, which lie beyond the capabilities of existing devices, using presently available or near-future manufacturing techniques.
It is now apparent that windblown sand plays a major role in the Martian environment. The existence of great sand and dust storms implies the lateral transport of large quantities of material on Mars that provide a convenient mechanism for the filling of craters- an event directly implied both by crater frequency-diameter statistics, and by the appearance of Martian craters. Such fast moving sand particles, saltating close to the Martian surface, can produce by collision and subsequent abrasion significant erosion of the Martian terrain.
In this paper the S band scintillations observed during the Pioneer 10 and 11 occultation measurements of Jupiter are analyzed. It is found that while the electron density irregularities are isotropic in the collision-dominated lower ionosphere, they are anisotropic in the upper ionosphere because of alignment along the magnetic field. By using Rytov's approximation the frequency spectrum of the log-amplitude scintillations is derived for a wave propagating in an anisotropic turbulent medium. It is shown that the spectrum depends to a large extent on the direction of anisotropy and is therefore useful for measuring the orientation of the magnetic field in regions that have not yet been probed by direct measurements. This new technique is applied to the Pioneer 10 and 11 observations, and is used to deduce the first measurements of magnetic field orientation in the ionosphere of Jupiter.
Under driving conditions, a typical geared system may be subjected to large dynamic loads. Also, the vibration level of the geared system is directly related to the noise radiated from the gear box. The steady state dynamic behavior of the system is examined in order to design reliable and quiet transmissions. The scope is limited to a system containing a spur gear pair with backlash and periodically time varying mesh stiffness, and rolling element bearings with clearance type nonlinearities. The internal static transmission error at the gear mesh, which is of importance from high frequency noise and vibration control view point, is considered in the formulation in sinusoidal or periodic form. A dynamic finite element model of the linear time invariant (LTI) system is developed. Effects of several system parameters, such as torsional and transverse flexibilities of the shafts and prime mover/load inertias, on free and forced vibration characteristics are investigated. Several reduced order LTI models are developed and validated by comparing their eigen solutions with the finite element model results. Using the reduced order formulations, a three degree of freedom dynamic model is developed which includes nonlinearities associated with radical clearances in the radial rolling element bearings, backlash between a spur gear pair and periodically varying gear mesh stiffness. As a limiting case, a single degree of freedom model of the spur gear pair with backlash is considered and mathematical conditions for tooth separation and back collision are defined. Both digital simulation technique and analytical models such as method of harmonic balance and the method of multiple scales were used to develop the steady state frequency response characteristics for various nonlinear and/or time varying cases.
Stimulated photon–photon scattering is a predicted consequence of quantum electrodynamics that has yet to be measured directly. Measuring the cross section for stimulated photon–photon scattering is the aim of a flagship experiment for NSF OPAL, a proposed laser user facility with two, 25-PW beamlines. We present optimized experimental designs for achieving this challenging and canonical measurement. A family of experimental geometries is identified that satisfies the momentum- and energy-matching conditions for two selected laser frequency options. Numerical models predict a maximum signal exceeding 1000 scattered photons per shot at the experimental conditions envisaged at NSF OPAL. Experimental requirements on collision geometry, polarization, cotiming and copointing, background suppression, and diagnostic technologies are investigated numerically. These results confirm that a beam cotiming shorter than the pulse duration and control of the copointing on a scale smaller than the shortest laser wavelength are needed to robustly scatter photons on a per-shot basis. Finally, we assess the bounds that a successful execution of this experiment may place on the mass scale of Born–Infeld nonlinear electrodynamics beyond the standard model of physics.
The nature and Equation of State (EOS) of dense neutron-rich matter are still very poorly known, while they have broad impacts on many interesting issues in both astrophysics and nuclear physics. In particular, the nuclear symmetry energy $E_{\textrm{sym}}(\rho )$ encoding the cost to make nuclear matter more neutron-rich has been the most uncertain component of the EOS of dense neutron-rich nucleonic matter. It significantly affects the radii, tidal deformations, cooling rates, and frequencies of various oscillation modes of isolated neutron stars as well as the strain amplitude and frequencies of gravitational waves from their mergers, besides its many effects on the structures of nuclei as well as the dynamics and observables of their collisions. Siemens (1970s) observed that $E_{\textrm{sym}}(\rho )$ scales as $(\rho /\rho _0)^{2/3}$ near the saturation density $\rho _0$ of nuclear matter, since both the kinetic part and the potential contribution (quadratic in momentum) exhibit this dependence. The scaling holds if: (1) the nucleon isoscalar potential is quadratic in momentum, and (2) the isovector interaction is weakly density-dependent. After examining many empirical evidences and understanding theoretical findings in the literature, we conclude that: (1) Siemens’ $\rho ^{2/3}$ scaling is robust and serves as a valuable benchmark for both nuclear theories and experiments up to $2\rho _0$ but breaks down at higher densities, (2) Experimental and theoretical findings about $E_{\textrm{sym}}(\rho )$ up to $2\rho _0$ are broadly consistent, but uncertainties remain large for its curvature $K_{\textrm{sym}}(\rho )$ and higher-order parameters, (3) Above $2\rho _0$ , uncertainties grow due to poorly constrained spin-isospin-dependent tensor and three-body forces as well as the resulting nucleon short-range correlations. Looking forward, combining signals from both observations of neutron stars and terrestrial heavy-ion reaction experiments is the most promising path to finally constraining the high-density $E_{\textrm{sym}}(\rho )$ and the EOS of supradense neutron-rich matter. Multiple examples of community efforts to further constrain the high-density $E_{\textrm{sym}}(\rho )$ using both real and mocked data of present and future high-precision observations of neutron stars, as well as heavy-ion collisions involving high-energy rare isotopes, are briefly reviewed.
The hyperfine frequency and wall shift of hydrogen atoms at 4.2 K stored in a bulb coated with solid H2 were measured. The phase shift per wall collision is -0.29(1) rad. The adsorption energy of H on H2 is 9(2) K, and the adsorption time at 4.2 K is approximately 30 nsec. Transverse and longitudinal relaxation times have been measured, and atomic densities greater than 10 to the 14th/cu cm have been observed.
The thermal synchrotron (TS) interpretation of gamma-ray burst continuum spectra requires an emission region which is hot, optically thin, and possessed of a super-Eddington flux of 10 to the 30 ergs/sq cm per sec for a 10-km neutron star. In order to maintain a pair population close to the Maxwellian, the collision excitation rate into higher Landau levels must exceed the cyclotron decay rates. Even if collective processes whose rates are close to the electron plasma frequency, or scattering by heavy ions, are invoked, a particle density of 10 to the 25th/cu cm is still needed. Both hypotheses point in the direction of a dense but thin emitting sheet, to whose structure attention is presently given together with the generation, propagation and coupling of the electromagnetic energy fluxes. A flare-like model can account for most of gamma ray bursts' general features.
Measured frequencies identify projectiles and indicate miss distances. Developmental battlefield-simulation system for training soldiers uses sounds emitted by incoming projectiles to identify projectiles and indicate miss distances. Depending on projectile type and closeness of each hit, system generates "kill" or "near-kill" indication. Artillery shell simulated by lightweight plastic projectile launched by compressed air. Flow of air through groove in nose of projectile generates acoustic tone. Each participant carries audio receiver measure and process tone signal. System performs fast Fourier transforms of received tone to obtain dominant frequency during each succeeding interval of approximately 40 ms (an interval determined from practical signal-processing requirements). With modifications, system concept applicable to collision-warning or collision-avoidance systems.
This paper presents independent multi-instrument observations that address the physical mechanisms of how ultralow-frequency (ULF) wave-associated electric fields initiate ionospheric density fluctuation and scintillation at the equator. Since the magnetic field at the equator is entirely embedded in a relatively high-collision and high-conductivity medium, the condition may not be possible for the geomagnetic field to fluctuate due to ULF wave activity. This implies that the fluctuating electric field at the equator may not be produced through equatorial dynamo action due to fluctuating magnetic fields. Instead, the electric field penetrates from high latitudes and produces fluctuating magnetic field as well as modulates the vertical drift and hence causes the density to fluctuate at the equatorial region. We demonstrate this by estimating the ULF associated fluctuating electric field at high latitudes and at the equatorial region by applying the appropriate attenuation factor as it penetrates to lower latitudes. The periodicity of both electric field and density fluctuations appears to be between 6 and 9 min, which is a typical period of ULF waves in the Pc5 range. Because of its large amplitude and long periods compared to other ULF wave frequency bands, the Pc5 wave-associated electric field, which can even be estimated using magnetograms with low sensitivity and low sampling rate (e.g., 1 min), can easily penetrate to the lower latitude region and produce significant ionospheric density fluctuations that can be strong enough to create scintillation at the equatorial region.
We describe the results of the frequency shifts measured from various buffer gases that might be used as a buffer gas to increase the loading efficiency and cooling of ions trapped in a small mercury ion clock. The small mass, volume and power requirement of space clock precludes the use of turbo pumps. Hence, a hermetically sealed vacuum system, incorporating a suitable getter material with a fixed amount of inert buffer gas may be a practical alternative to the groundbased system. The collision shifts of 40,507,347.996xx Hz clock transition for helium, neon and argon buffer gases were measured in the ambient earth magnetic field. In addition to the above non-getterable inert gases we also measured the frequency shifts due to getterable, molecular hydrogen and nitrogen gases which may be used as buffer gases when incorporated with a miniature ion pump. We also examined the frequency shift due to the low methane gas partial pressure in a fixed higher pressure neon buffer gas environment. Methane gas interacted with mercury ions in a peculiar way as to preserve the ion number but to relax the population difference in the two hyperfine clock states and thereby reducing the clock resonance signal. The same population relaxation was also observed for other molecular buffer gases (N H ,) but at much reduced rate.
The paper considers methods of particle cooling applicable to beam cooling in high energy hadron colliders at the collision energy. Presently, there are two major methods of the cooling the electron cooling and stochastic cooling. The later, in application to colliders, requires exceptionally large frequency band of cooling system. Presently two methods are considered. They are the optical stochastic cooling (OSC) and the coherent electron cooling (CEC). OSC and CEC are essentially extensions of microwave stochastic cooling, operating in 1-10 GHz frequency range, to the optical frequencies enabling bands up to 30-300 THz. The OSC uses undulators as a pickup and a kicker, and an optical amplifier for signal amplification, while the CEC uses an electron beam for all these functions. We discuss major limitations, advantages and disadvantages of electron and stochastic cooling systems.
A Monte Carlo code is used to explore the full effects of the convection electric field on distributions of upflowing O(+) ions from the cusp/cleft ionosphere. Trajectories of individual ions/neutrals are computed as they undergo multiple charge-exchange collisions. In the ion state, the trajectories are computed in realistic models of the magnetic field and the convection, corotation, and ambipolar electric fields. The effects of ion-ion collisions are included, and the trajectories are computed with and without simultaneous stochastic heating perpendicular to the magnetic field by a realistic model of broadband, low frequency waves. In the neutral state, ballistic trajectories in the gravitational field are computed. The initial conditions of the ions, in addition to ambipolar electric field and the number densities and temperatures of O(+), H(+), and electrons as a function of height in the cusp/cleft region were obtained from the results of Gombosi and Killeen (1987), who used a hydrodynamic code to simulate the time-dependent frictional-heating effects in a magnetic tube during its motion though the convection throat. The distribution of the ion fluxes as a function of height are constructed from the case histories.
LF incompressible waves and gradient instabilities in ionosphere
Studies are described of low-frequency quasi-static instabilities in a fully ionized plasma. The plasma is assumed to be immersed in a uniform magnetic field, and is either uniform or has a number density gradient perpendicular to the magnetic field. A moment equation description of the ion and electron dynamics is used; collisions are assumed to have a strong effect on electron motion along the magnetic field. Before considering specific modes, a stability analysis is developed which allows a classification of wave growth characteristics to be made for a bounded system from solutions to the dispersion relation for an infinite system. Also, a method is given for calculating the normal mode frequencies and wave profiles by using the reflection coefficients at the boundaries. For wave propagation perpendicular to the magnetic field, the flute wave is studied in cylindrical geometry. The destabilizing effect of a radial electric field is considered by solving a differential equation.