Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Cloud Clearing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Why is there a diurnal cycle of precipitation over the oceans?

Using the Colorado State University general circulation model, simulated diurnal and semidiurnal variability of precipitation has been analyzed. At least four mechanisms have been proposed to account for the observed daily oscillations of precipitations over the ocean: direct radiation convection, radiation-dynamics-convection interactions, remote influence of the continents, and atmospheric tidal forces. Results indicate that neither land-sea contrasts nor cloudiness are necessary to produce daily variations of precipitations over the oceans. Clear-sky radiative effects, cloud-radiative effects, and the remote influence of the continents all turn out to play a role.

Randall, David A.↗

Imaging of Venus from Galileo - Early results and camera performance

Three images of Venus have been returned so far by the Galileo spacecraft following an encounter with the planet on UT February 10, 1990. The images, taken at effective wavelengths of 4200 and 9900 A, characterize the global motions and distribution of haze near the Venus cloud tops and, at the latter wavelength, deep within the main cloud. Previously undetected markings are clearly seen in the near-infrared image. The global distribution of these features, which have maximum contrasts of 3 percent, is different from that recorded at short wavelengths. In particular, the 'polar collar', which is omnipresent in short wavelength images, is absent at 9900 A. The maximum contrast in the features at 4200 A is about 20 percent. The optical performance of the camera is described and is judged to be nominal.

Belton, M. J. S.↗

Deuterium in North Atlantic storm tops

During the ERICA project in 1989, ice crystals were collected from the tops of two winter storms and one broad cirrus cloud. Deuterium concentration in the storm ice samples, together with a model of isotope fractionation, are used to determine the temperature where the ice was formed. Knowledge of the ice formation temperature allows us to determine whether the ice has fallen or been lofted to the altitude of collection. In both storms, the estimated fall distance decreases upward. In the 21 January storm, the fall distance decreases to zero at the cloud top. In the 23 January storm, the fall distance decreases to zero at a point 2 km below the cloud top and appears to become negative above, indicating lofted ice. Cloud particle data from the cloud tops show an ice-to-vapor ratio greater than one and indicate the presence of particles with small terminal velocities; both observations support the idea of ice lofting. The satellite-derived cloud tops lie well below the actual cloud top (e.g., 2.5 km below on 23 January), indicating that the lofted ice in winter storms may not be detectable from space using IR radiance techniques. A comparison of deuterium in cloud-top ice and clear-air vapor suggests that even in winter, when vertical air motions are relatively weak, lofted ice crystals are the dominant source of water vapor in the upper troposphere.

Smith, Ronald B.↗

The Radiative Effect on Cloud Microphysics from the Arctic to the Tropics

Cloud representation is one of the largest uncertainties in the current weather and climate models. In this article, the observations and modeling of the radiative effect on (cloud) microphysics (REM) from the Arctic to the Tropics are overviewed, providing a new direction to meet the challenge of cloud representation. REM deals with the radiation-induced temperature difference between cloud particles and air. It leads to two common phenomena observed at the surface—dew and frost—and impacts clouds aloft significantly, which is noticed via the wide occurrence of horizontally oriented ice crystals (HOICs). However, REM has been overlooked by all of the operational weather and climate models. Based on the bin model of REM and the global distribution of radiative cooling/warming, the observations of REM from several platforms (e.g., aircrafts, field campaigns, and satellites) are coordinated in this article, yielding a global picture on REM. As a result, the picture is compatible with the global distribution of HOICs and other ice crystal characteristics obtained from various clouds on the globe, such as diamond dust (or clear-sky precipitation) in the Arctic, sub-visual cirrus clouds in the tropical tropopause layer, and other cirrus clouds from the low to high latitudes. In addition, ice crystals possess relatively strong REM compared to liquid drops because their aspect ratio is usually not one. The global picture on REM can be used by the weather and climate modelers to diagnose their cloud representation biases. It can also be used to improve the atmospheric ice retrieval algorithm from satellite observations.

cloud microphysics↗

Electron Cloud Measurements in Fermilab Booster

Fermilab Booster synchrotron requires an intensity upgrade from 4.5x1012 to 6.5x1012 protons per pulse as a part of Fermilabs Proton Improvement Plan-II (PIP-II). One of the factors which may limit the high-intensity performance is the fast transverse instabilities caused by electron cloud effects. According to the experience in the Recycler, the electron cloud gradually builds up over multiple turns in the combined function magnets and can reach final intensities orders of magnitude greater than in a pure dipole. Since the Booster synchrotron also incorporates combined function magnets, it is essential to discover any existence of an electron cloud. And if it does, its effects on the PIP-II era Booster and its mitigating techniques. As the first step, the presence or absence of the electron cloud was investigated using the clearing bunch technique. This paper presents experimental details and observations of the bunch-by-bunch tune shifts of beams with various bunch train structures at low and high intensities and simulation results conducted using PyECLOUD.

43 PARTICLE ACCELERATORS↗

Surface Radiation Budget

The Surface Radiation Budget (SRB) data sets contain global 3-hourly, daily and monthly averages of surface longwave and shortwave radiative properties, cloud amount, and meteorological properties computed using models. The main input data for these models include cloud information, top-of-atmosphere radiances and profiles of atmospheric water vapor and temperature. Some of the input data include Earth Radiation Budget Energy (ERBE) top-of-atmosphere clear-sky albedo and International Satellite Cloud Climatology Project (ISCCP) radiances and cloud amount. SRB parameters derived for the renewable energy community are also available from the Surface meteorology and Solar Energy (SSE) data set. Other SRB data are available from Clouds and the Earth's Radiant Energy System (CERES) and Multi-angle Imaging SpectroRadiometer (MISR). [Mission Objectives] The objective of the SRB Project is to produce and archive a global data set of shortwave (SW) and longwave (LW) surface and top of the atmosphere parameters. The data generated in the SRB project may be used in conjunction with other data sets to facilitate the development of renewable energy resources and increase understanding of radiative properties within the meteorological community. [Temporal_Coverage: Start_Date=1983-07-01; Stop_Date=2005-06-30] [Spatial_Coverage: Southernmost_Latitude=-90; Northernmost_Latitude=90; Westernmost_Longitude=-180; Easternmost_Longitude=180].

Stackhouse, Paul W.↗

Climate Quality Broadband and Narrowband Solar Reflected Radiance Calibration Between Sensors in Orbit

vAs the potential impacts of global climate change become more clear [1], the need to determine the accuracy of climate prediction over decade-to-century time scales has become an urgent and critical challenge. The most critical tests of climate model predictions will occur using observations of decadal changes in climate forcing, response, and feedback variables. Many of these key climate variables are observed by remotely sensing the global distribution of reflected solar spectral and broadband radiance. These "reflected solar" variables include aerosols, clouds, radiative fluxes, snow, ice, vegetation, ocean color, and land cover. Achieving sufficient satellite instrument accuracy, stability, and overlap to rigorously observe decadal change signals has proven very difficult in most cases and has not yet been achieved in others [2]. One of the earliest efforts to make climate quality observations was for Earth Radiation Budget: Nimbus 6/7 in the late 1970s, ERBE in the 1980s/90s, and CERES in 2000s are examples of the most complete global records. The recent CERES data products have carried out the most extensive intercomparisons because if the need to merge data from up to 11 instruments (CERES, MODIS, geostationary imagers) on 7 spacecraft (Terra, Aqua, and 5 geostationary) for any given month. In order to achieve climate calibration for cloud feedbacks, the radiative effect of clear-sky, all-sky, and cloud radiative effect must all be made with very high stability and accuracy. For shortwave solar reflected flux, even the 1% CERES broadband absolute accuracy (1-sigma confidence bound) is not sufficient to allow gaps in the radiation record for decadal climate change. Typical absolute accuracy for the best narrowband sensors like SeaWiFS, MISR, and MODIS range from 2 to 4% (1-sigma). IPCC greenhouse gas radiative forcing is approx. 0.6 W/sq m per decade or 0.6% of the global mean shortwave reflected flux, so that a 50% cloud feedback would change the global reflected flux by approx. 0.3 W/sq m or 0.3% per decade in broadband SW calibration change. Recent results comparing CERES reflected flux changes with MODIS, MISR, and SeaWiFS narrowband changes concluded that only SeaWiFS and CERES were approaching sufficient stability in calibration for decadal climate change [3]. Results using deep convective clouds in the optically thick limit as a stability target may prove very effective for improving past data sets like ISCCP. Results for intercalibration of geostationary imagers to CERES using an entire month of regional nearly coincident data demonstrates new approaches to constraining the calibration of current geostationary imagers. The new Decadal Survey Mission CLARREO is examining future approaches to a "NIST-in-Orbit" approach of very high absolute accuracy reference radiometers that cover the full solar and infrared spectrum at high spectral resolution but at low spatial resolution. Sampling studies have shown that a precessing CLARREO mission could calibrate other geo and leo reflected solar radiation and thermal infrared sensors.

Wielicki, Bruce A.↗

CERES Monthly Gridded Single Satellite Fluxes and Clouds (FSW) in HDF (CER_FSW_Terra-FM1-MODIS_Edition2C)

The Monthly Gridded Radiative Fluxes and Clouds (FSW) product contains a month of space and time averaged Clouds and the Earth's Radiant Energy System (CERES) data for a single scanner instrument. The FSW is also produced for combinations of scanner instruments. All instantaneous fluxes from the CERES CRS product for a month are sorted by 1-degree spatial regions and by the Universal Time (UT) hour of observation. The mean of the instantaneous fluxes for a given region-hour bin is determined and recorded on the FSW along with other flux statistics and scene information. The mean adjusted fluxes at the four atmospheric levels defined by CRS are also included for both clear-sky and total-sky scenes. In addition, four cloud height categories are defined by dividing the atmosphere into four intervals with boundaries at the surface, 700-, 500-, 300-hPa, and the Top-of-the-Atmosphere (TOA). The cloud layers from CRS are put into one of the cloud height categories and averaged over the region. The cloud properties are also column averaged and included on the FSW. [Location=GLOBAL] [Temporal_Coverage: Start_Date=1998-01-01; Stop_Date=2005-12-31] [Spatial_Coverage: Southernmost_Latitude=-90; Northernmost_Latitude=90; Westernmost_Longitude=-180; Easternmost_Longitude=180] [Data_Resolution: Latitude_Resolution=1 degree; Longitude_Resolution=1 degree; Horizontal_Resolution_Range=100 km - < 250 km or approximately 1 degree - < 2.5 degrees; Temporal_Resolution=1 month; Temporal_Resolution_Range=Monthly - < Annual].

NET FLUX↗

CERES Monthly Gridded Single Satellite TOA and Surfaces/Clouds(SFC) data in HDF (CER_SFC_Aqua-FM3-MODIS_Edition1B)

The Monthly Gridded TOA/Surface Fluxes and Clouds (SFC) product contains a month of space and time averaged Clouds and the Earth's Radiant Energy System (CERES) data for a single scanner instrument. The SFC is also produced for combinations of scanner instruments. All instantaneous shortwave, longwave, and window fluxes at the Top-of-the-Atmosphere (TOA) and surface from the CERES SSF product for a month are sorted by 1-degree spatial regions and by the local hour of observation. The mean of the instantaneous fluxes for a given region-hour bin is determined and recorded on the SFC along with other flux statistics and scene information. These average fluxes are given for both clear-sky and total-sky scenes. The regional cloud properties are column averaged and are included on the SFC. [Location=GLOBAL] [Temporal_Coverage: Start_Date=1998-01-01; Stop_Date=2005-03-31] [Spatial_Coverage: Southernmost_Latitude=-90; Northernmost_Latitude=90; Westernmost_Longitude=-180; Easternmost_Longitude=100] [Data_Resolution: Latitude_Resolution=1 degree; Longitude_Resolution=1 degree; Horizontal_Resolution_Range=100 km - < 250 km or approximately 1 degree - < 2.5 degrees; Temporal_Resolution=1 hour; Temporal_Resolution_Range=Hourly - < Daily].

CLEAR-SKY ALBEDO↗

Effect of cloud cover and surface type on earth's radiation budget derived from the first year of ERBE data

One year of ERBE data is analyzed for variations in outgoing LW and absorbed solar flux. Differences in land and ocean radiation budgets as well as differences between clear-sky and total scenes, including clouds, are studied. The variation of monthly average radiative parameters is examined for February 1985 through January 1986 for selected study regions and on zonal and global scales. ERBE results show significant seasonal variations in both outgoing LW and absorbed SW flux, and a pronounced difference between oceanic and continental surfaces. The main factors determining cloud radiative forcing in a given region are solar insolation, cloud amount, cloud type, and surface properties. The strongest effects of clouds are found in the midlatitude storm tracks over the oceans. Over much of the globe, LW warming is balanced by SW cooling. The annual-global average net cloud forcing shows that clouds have a net cooling effect on the earth for the year.

Gibson, G. G.↗

Spectral Longwave Cloud Radiative Forcing as Observed by AIRS

AIRS V6 products contain the spectral contributions to Outgoing Longwave Radiation (OLR), clear-sky OLR (OLR(sub CLR)), and Longwave Cloud Radiative Forcing (LWCRF) in 16 bands from 100 cm(exp -1) to 3260 cm(exp -1). We show climatologies of selected spectrally resolved AIRS V6 products over the period of September 2002 through August 2016. Spectrally resolved LWCRF can better describe the response of the Earth system to cloud and cloud feedback processes. The spectral LWCRF enables us to estimate the fraction of each contributing factor to cloud forcing, i.e.: surface temperature, mid to upper tropospheric water vapor, and tropospheric temperature. This presentation also compares the spatial characteristics of LWCRF from AIRS, CERES_EBAF Edition-2.8, and MERRA-2. AIRS and CERES LWCRF products show good agreement. The OLR bias between AIRS and CERES is very close to that of OLR(sub CLR). This implies that both AIRS and CERES OLR products accurately account for the effect of clouds on OLR.

Cloud radiative forcing↗

CERES Monthly Gridded Single Satellite TOA and Surfaces/Clouds (SFC) data in HDF (CER_SFC_Terra-FM1-MODIS_Edition2C)

The Monthly Gridded TOA/Surface Fluxes and Clouds (SFC) product contains a month of space and time averaged Clouds and the Earth's Radiant Energy System (CERES) data for a single scanner instrument. The SFC is also produced for combinations of scanner instruments. All instantaneous shortwave, longwave, and window fluxes at the Top-of-the-Atmosphere (TOA) and surface from the CERES SSF product for a month are sorted by 1-degree spatial regions and by the local hour of observation. The mean of the instantaneous fluxes for a given region-hour bin is determined and recorded on the SFC along with other flux statistics and scene information. These average fluxes are given for both clear-sky and total-sky scenes. The regional cloud properties are column averaged and are included on the SFC. [Location=GLOBAL] [Temporal_Coverage: Start_Date=1998-01-01; Stop_Date=2005-12-31] [Spatial_Coverage: Southernmost_Latitude=-90; Northernmost_Latitude=90; Westernmost_Longitude=-180; Easternmost_Longitude=100] [Data_Resolution: Latitude_Resolution=1 degree; Longitude_Resolution=1 degree; Horizontal_Resolution_Range=100 km - < 250 km or approximately 1 degree - < 2.5 degrees; Temporal_Resolution=1 hour; Temporal_Resolution_Range=Hourly - < Daily].

EOSDIS↗

Remote sounding of cloudy atmospheres. I - The single cloud layer

The relaxation method for the inverse solution of the radiative transfer equation is applied in a dual-frequency scheme for the determination of complete vertical temperature profiles in cloudy atmospheres from radiance observations alone, without any additional information related to the expected solutions. The dual-frequency principle employs to advantage a property in the Planck function of the dependence of intensity on frequency. This property leads to the formulation of a new convergence criterion for the selection of cloud-sounding frequencies to be used for reconstructing the clear column radiance from observations made in the presence of a broken cloud layer in all fields of view. The principle is applied to the case of observations in two adjacent or partially overlapping fields of view and to the case of observations in a single field of view. The solutions are illustrated by numerical examples in the dual-frequency ranges of the 4.3 and 15-micron CO2 bands of the terrestrial atmosphere.

Chahine, M. T.↗

Snow Depth from AMSR-2 Using Multispectral Satellite Data in an Artificial Neural Network

By using diffusion theory and Monte Carlo lidar radiative transfer simulations, Hu et al. (2022b) has derived snow depth from the first-, second- and third-order moments of the lidar backscattering pathlength distribution. Lu et al. (2022) calculated the snow depth by applying the methods to the satellite ICESat-2 lidar measurements over the Arctic sea ice, as well as land surfaces of Northern Hemisphere. In this paper, an artificial neural network (ANN) algorithm, employing several channels from Advanced Microwave Scanning Radiometer 2 (AMSR-2) and the humidity vertical profiles from Global Modeling and Assimilation Office (GMAO) Goddard Earth Observing System for Instrument Teams (GEOS-IT) product, is trained to determine snow depth identified by time and geolocation matched 2019 ICESat-2 snow-depth data during winter months over the Arctic sea ice. The trained ANN snow-depth was applied to 2018 AMSR-2 clear pixel data, although the algorithms perform reasonably well in thinner clouds. The validation data (different from the training set) of ANN snow depth from AMSR-2 showed a good agreement with time matched and co-located snow-depth values from ICESat-2. The bias was near zero, with mean absolute error (MAE) 0.05 cm and a root-mean-square-error (RMSE) 0.08 cm. Prior applying the trained ANN snow depth to AMSR-2 data, a cloud screening algorithm was developed with a similar approach. A separate ANN cloud mask was trained to determine an AMSR-2 pixel is clear or cloudy with time and geolocation matched 2015 CALIOP Vertical Feature Mask (VFM) over Arctic sea ice. The ANN cloud mask from AMSR-2 under-estimated cloud fraction by 3-6% compared to CALIOP . The additional research is needed to conclusively evaluate the ANN cloud mask accuracy. Finally, this paper will lay the foundation for a sustained long-term snowfall and snow-storm monitoring system. The future Cloud Aerosol LIdar for Global scale Observations of the ocean-Land Atmosphere system (CALIGOLA) mission will provide a means to calculate snow depth from the lidar backscattering pathlength distribution, benefiting from the UV, visible and infrared pulses. With the calculated snow depth as the truth one could develop a machine learning algorithm, as it was done in this paper, using a passive microwave instrument available at that time to generate a wide range of snow depth data, covering extensive spatial areas in the cross-orbit direction.

Neural Network↗

Spatial and Temporal Varying Thresholds for Cloud Detection in Satellite Imagery

A new cloud detection technique has been developed and applied to both geostationary and polar orbiting satellite imagery having channels in the thermal infrared and short wave infrared spectral regions. The bispectral composite threshold (BCT) technique uses only the 11 micron and 3.9 micron channels, and composite imagery generated from these channels, in a four-step cloud detection procedure to produce a binary cloud mask at single pixel resolution. A unique aspect of this algorithm is the use of 20-day composites of the 11 micron and the 11 - 3.9 micron channel difference imagery to represent spatially and temporally varying clear-sky thresholds for the bispectral cloud tests. The BCT cloud detection algorithm has been applied to GOES and MODIS data over the continental United States over the last three years with good success. The resulting products have been validated against "truth" datasets (generated by the manual determination of the sky conditions from available satellite imagery) for various seasons from the 2003-2005 periods. The day and night algorithm has been shown to determine the correct sky conditions 80-90% of the time (on average) over land and ocean areas. Only a small variation in algorithm performance occurs between day-night, land-ocean, and between seasons. The algorithm performs least well. during he winter season with only 80% of the sky conditions determined correctly. The algorithm was found to under-determine clouds at night and during times of low sun angle (in geostationary satellite data) and tends to over-determine the presence of clouds during the day, particularly in the summertime. Since the spectral tests use only the short- and long-wave channels common to most multispectral scanners; the application of the BCT technique to a variety of satellite sensors including SEVERI should be straightforward and produce similar performance results.

Jedlovec, Gary↗

A method for remote sensing the emissivity, fractional cloud cover and cloud top temperature of high-level, thin clouds

A methodology for retrieving the emissivity, cloud cover and cloud top temperature of high-level, thin clouds is developed and described. In the thermal infrared windows, the outgoing radiances from the earth's atmosphere contain information about cloud emissivity and cloud top temperature. This information is clearly demonstrated in the brightness temperature difference curves of two window channels. For the purpose of illustration, two window channels centered at 810 and 930 cm are chosen to construct the brightness temperature difference curves for a range of cloud top temperatures. These curves vary for different cloud top temperatures, and along each of these curves the emissivity changes. The brightness temperature difference method is used in a simulation study to demonstrate the feasibility of retrieving the cloud top temperature and emissivity by the utilization of measurements in two window channels. As expected, a perfect retrieval is found if perfect measurements and ideal atmospheric conditions are assumed. If a random error, which has a normal distribution with a mean of zero and standard deviation of + or - 0.5 C, is imposed to the measurements, a reasonable retrieval is found for emissivity greater than 0.3. The algorithm has been applied to a limited amount of HIRS2 data, which has 3.7, 3.98 and 11 micron channels. The cloud top temperature, emissivity and cloud cover are determined by using these channels.

Wu, Man-Li C.↗

CERES Monthly Gridded Single Satellite TOA and Surfaces/Clouds (SFC) data in HDF (CER_SFC_Terra-FM2-MODIS_Edition2B)

The Monthly Gridded TOA/Surface Fluxes and Clouds (SFC) product contains a month of space and time averaged Clouds and the Earth's Radiant Energy System (CERES) data for a single scanner instrument. The SFC is also produced for combinations of scanner instruments. All instantaneous shortwave, longwave, and window fluxes at the Top-of-the-Atmosphere (TOA) and surface from the CERES SSF product for a month are sorted by 1-degree spatial regions and by the local hour of observation. The mean of the instantaneous fluxes for a given region-hour bin is determined and recorded on the SFC along with other flux statistics and scene information. These average fluxes are given for both clear-sky and total-sky scenes. The regional cloud properties are column averaged and are included on the SFC. [Location=GLOBAL] [Temporal_Coverage: Start_Date=1998-01-01; Stop_Date=2003-10-31] [Spatial_Coverage: Southernmost_Latitude=-90; Northernmost_Latitude=90; Westernmost_Longitude=-180; Easternmost_Longitude=100] [Data_Resolution: Latitude_Resolution=1 degree; Longitude_Resolution=1 degree; Horizontal_Resolution_Range=100 km - < 250 km or approximately 1 degree - < 2.5 degrees; Temporal_Resolution=1 hour; Temporal_Resolution_Range=Hourly - < Daily].

CLOUD INFRARED EMISSIVITY↗

Example MODIS Global Cloud Optical and Microphysical Properties: Comparisons between Terra and Aqua

MODIS observations from the NASA EOS Terra spacecraft (launched in December 1999, 1030 local time equatorial crossing) have provided a unique data set of Earth observations. With the launch of the NASA Aqua spacecraft in May 2002 (1330 local time), two MODIS daytime (sunlit) and nighttime observations are now available in a 24 hour period, allowing for some measure of diurnal variability. We report on an initial analysis of several operational global (Level-3) cloud products from the two platforms. The MODIS atmosphere Level-3 products, which include clear-sky and aerosol products in addition to cloud products, are available as three separate files providing daily, eight-day, and monthly aggregations; each temporal aggregation is spatially aggregated to a 1 degree grid. The files contain approximately 600 statisitical datasets (from simple means and standard deviations to 1 - and 2-dimensional histograms). Operational cloud products include detection (cloud fraction), cloud-top properties, and daytimeonly cloud optical thickness and particle effective radius for both water and ice clouds. We will compare example global Terra and Aqua cloud fraction, optical thickness, and effective radius aggregations.

Hubanks, P. A.↗