Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Casting Designs”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Cost Models for MMC Manufacturing Processes

The quality cost modeling (QCM) tool is intended to be a relatively simple-to-use device for obtaining a first-order assessment of the quality-cost relationship for a given process-material combination. The QCM curve is a plot of cost versus quality (an index indicating microstructural quality), which is unique for a given process-material combination. The QCM curve indicates the tradeoff between cost and performance, thus enabling one to evaluate affordability. Additionally, the effect of changes in process design, raw materials, and process conditions on the cost-quality relationship can be evaluated. Such results might indicate the most efficient means to obtain improved quality at reduced cost by process design refinements, the implementation of sensors and models for closed loop process control, or improvement in the properties of raw materials being fed into the process. QCM also allows alternative processes for producing the same or similar material to be compared in terms of their potential for producing competitively priced, high quality material. Aside from demonstrating the usefulness of the QCM concept, this is one of the main foci of the present research program, namely to compare processes for making continuous fiber reinforced, metal matrix composites (MMC's). Two processes, low pressure plasma spray deposition and tape casting are considered for QCM development. This document consists of a detailed look at the design of the QCM approach, followed by discussion of the application of QCM to each of the selected MMC manufacturing processes along with results, comparison of processes, and finally, a summary of findings and recommendations.

Elzey, Dana M.↗

Bandgap properties of diamond structure photonic crystal heterostructures with inclined and curved interfaces

The 3D (dimensional) diamond structure photonic crystal heterostructures with different lattice constants were prepared using rapid prototyping and gel casting with alumina. In this paper, heterostructures with inclined and curved interfaces were designed and its bandgap properties were studied. The normalized resonant intensity of electromagnetic wave in heterostructure with inclined and curved interface is stronger than that in the ordinary heterostructure without modified interface. The influence of curved interface on transmission properties of electromagnetic wave was investigated with the radius of curvature ranging from 17 mm to 37 mm at 5 mm interval. The results show that two resonant modes appear in the photonic band gap, being similar to the band gap characteristics of the photonic crystals with two defects inside. With the increasing of the radius of curvature, the resonant mode shift to higher frequency. In the structure with a radius of curvature of 32 mm, a guiding band appears in the photonic band gap. Further increase in the radius of curvature, the guiding band will split into two resonant modes again and the two resonant modes shift to lower frequencies.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Advanced solid electrolyte cell for CO2 and H2O electrolysis

A solid electrolyte cell with improved sealing characteristics was examined. A tube cell was designed, developed, fabricated, and tested. Design concepts incorporated in the tube cell to improve its sealing capability included minimizing the number of seals per cell and moving seals to lower temperature regions. The advanced tube cell design consists of one high temperature ceramic cement seal, one high temperature gasket seal, and three low temperature silicone elastomer seals. The two high temperature seals in the tube cell design represent a significant improvement over the ten high temperature precious metal seals required by the electrolyzer drum design. For the tube cell design the solid electrolyte was 8 mole percent yttria stabilized zirconium oxide slip cast into the shape of a tube with electrodes applied on the inside and outside surfaces.

Shumar, J. W.↗

Graphite/polyimide tension tests at elevated and cryogenic temperatures

Interim results for characterizing tension properties of graphite/polyimide laminates are reported. Existing test procedures for resin-matrix composites were evaluated for use through the extreme temperature range indicated above. Of particular concern was the performance of resistance strain gages at the elevated temperatures and tests were carried out to compare their performance against that of a capacitive strain gage. Limited design data are reported for graphite/polyimide laminates which are being produced through the CASTS Project.

Chapman, A. J.↗

A subsized fatigue specimen

A subsized fatigue specimen has been designed to overcome the difficulty of machining a full-sized specimen from cast superalloy components. A finite element analysis confirmed that the stress was maximum at the gauge section for any given set of clamping and tensile loads, and that the stresses developed due to clamping forces were negligible compared with those due to tensile or compressive loads. Fatigue data generated using subsized specimens of AISI 4130 steel, 2024-T4 aluminum alloy and 6Al-4V titanium alloy compared well with those available in the literature for full-sized specimens.

Jeelani, S.↗

Mathematical Model Of Curing Behavior Of A Polymer

Mathematical model predicts selected aspects of chemical, thermal and mechanical responses of polymeric liner and propellant materials during curing process. Predictions made both prior to processing and during process in quasi-real time. Developed specifically for use in designing and analyzing process in which bondline materials (including polymeric liners) and propellant cast and cured in rocket motor. With modifications, model applicable to curing of other polymeric materials. Further development may provide direct "in-line" program for calculations, including comparisons, in real time. This will constitute basis for more sophisticated control of process.

Loomis, Willard C.↗

Influence of Cr and W alloying on the fiber-matrix interfacial shear strength in cast and directionally solidified sapphire NiAl composites

Sapphire-reinforced NiAl matrix composites with chromium or tungsten as alloying additions were synthesized using casting and zone directional solidification (DS) techniques and characterized by a fiber pushout test as well as by microhardness measurements. The sapphire-NiAl(Cr) specimens exhibited an interlayer of Cr rich eutectic at the fiber-matrix interface and a higher interfacial shear strength compared to unalloyed sapphire-NiAl specimens processed under identical conditions. In contrast, the sapphire-NiAl(W) specimens did not show interfacial excess of tungsten rich phases, although the interfacial shear strength was high and comparable to that of sapphire-NiAl(Cr). The postdebond sliding stress was higher in sapphire-NiAl(Cr) than in sapphire-NiAl(W) due to interface enrichment with chromium particles. The matrix microhardness progressively decreased with increasing distance from the interface in both DS NiAl and NiAl(Cr) specimens. The study highlights the potential of casting and DS techniques to improve the toughness and strength of NiAl by designing dual-phase microstructures in NiAl alloys reinforced with sapphire fibers.

Asthana, R.↗

Learning About Cockpit Automation: From Piston Trainer to Jet Transport

Two experiments explored the idea of providing cockpit automation training to airline-bound student pilots using cockpit automation equipment commonly found in small training airplanes. In a first experiment, pilots mastered a set of tasks and maneuvers using a GPS navigation computer, autopilot, and flight director system installed in a small training airplane Students were then tested on their ability to complete a similar set of tasks using the cockpit automation system found in a popular jet transport aircraft. Pilot were able to successfully complete 77% of all tasks in the jet transport on their first attempt. An analysis of a control group suggests that the pilot's success was attributable to the application of automation principles they had learned in the small airplane. A second experiment looked at two different ways of delivering small-aeroplane cockpit automation training: a self-study method, and a dual instruction method. The results showed a slight advantage for the self-study method. Overall, the results of the two studies cast a strong vote for the incorporation of cockpit automation training in curricula designed for pilot who will later transition to the jet fleet.

Casner, Stephen M.↗

Performance Optimizing Multi-Objective Adaptive Control with Time-Varying Model Reference Modification

This paper presents a new adaptive control approach that involves a performance optimization objective. The problem is cast as a multi-objective optimal control. The control synthesis involves the design of a performance optimizing controller from a subset of control inputs. The effect of the performance optimizing controller is to introduce an uncertainty into the system that can degrade tracking of the reference model. An adaptive controller from the remaining control inputs is designed to reduce the effect of the uncertainty while maintaining a notion of performance optimization in the adaptive control system.

Adaptive Control↗

Similarity Criteria for the Study of Removal of Spherical Non-metallic Inclusions in Physical Models of Continuous Casting Tundishes: A More Fundamental Approach

Physical modeling is widely used for studying steelmaking processes. The accuracy of this technique depends on the use of appropriate similarity criteria during experimental design. The present work deduced rigorously the similarity criteria for the study of spherical non-metallic inclusions in isothermal physical models of tundishes. Initially, macroscopic quantities were used to simplify the multiphase problem. Then, the similarity criteria were obtained from the dimensionless form of the exact equation of motion for an inclusion in Stokes regime. The validity range of these criteria was discussed and they were compared with common literature practice. Some practical considerations were also presented. This work clarifies various implicit assumptions usually adopted in literature. Additionally, a restrictive criterion to choose the density of the inclusion simulating particles was obtained, which can be satisfied, for example, by hollow glass particles in water models. This criterion is necessary to adequately describe the inclusion motion in regions where fluid elements suffer strong acceleration (e.g., inside nozzles, near flow controllers or in the entering fluid jet). Moreover, it was established an upper limit for the concentration of particles injected in the inlet nozzle of physical models, which do not simulate the phenomenon of inclusion aggregation.

36 MATERIALS SCIENCE↗

Processing Parameter Control of Lifetime-Limiting Failure Mechanisms in Al-Si Cast Alloys at Room and Elevated Temperatures

Aluminum-silicon cast alloys widely used throughout the transportation sector, A356, 319, and A390, have been studied with respect to chemical compositions and processing parameters that control the resultant mechanical behavior. First, the development of strengthening mechanisms is discussed in terms of the role that alloying elements, solidification behavior, and thermal treatments play. Based on this understanding, an extensive matrix of material conditions was developed and characterized in order to provide practical guidelines for alloy development. In order to provide an understanding of lifetime-limiting failure mechanisms, fatigue crack growth and hot compressive dwell behaviors were further investigated. Fatigue crack growth tests were conducted for all alloys at R = 0.1 and room temperature, and creep–fatigue of 319 was studied at R = − 1.5 and 250 °C. The role of processing parameters in controlling the mechanical properties is identified and discussed, and recommendations for optimized design are made.

36 MATERIALS SCIENCE↗

Bilayer Anion-Exchange Membrane with Low Borohydride Crossover and Improved Fuel Efficiency for Direct Borohdyride Fuel Cell

The development of membranes with low fuel crossover and high fuel efficiency is a key issue in direct borohydride fuel cells (DBFCs). In previous work, we produced a poly(vinyl alcohol) (PVA)-anion-exchange resin (AER) membrane with a low fuel crossover and a low fuel efficiency by introducing Co ions. In this work, a bilayer membrane was designed to improve the fuel efficiency and cell performance. The bilayer membrane was prepared by casting a PVA-AER wet gel onto the partially desiccated Co-PVA-AER gel. The bilayer membrane showed a borohydride permeability of 1.34 × 10 –6 cm 2 ·s –1 , which was even lower than that of the Co-PVA-AER membrane (1.98 ×10 –6 cm 2 ·s –1 ) and the PVA-AER membrane (2.80 × 10 –6 cm 2 ·s –1 ). The DBFC using the bilayer membrane exhibited a higher fuel efficiency (37.4%) and output power (1.73 Wh) than the DBFCs using the Co-PVA-AER membrane (33.3%, 1.27 Wh) and the PVA-AER membrane (34.3%, 1.2 Wh). Furthermore, the DBFC using the bilayer membrane achieved a peak power density of 327 mW·cm –2 , which was 2.14 times of that of the DBFC using the PVA-AER membrane (153 mW·cm –2 ). Finally, the drastic improvement benefited from the bilayer design, which introduced an interphase to suppress fuel crossover and avoided unnecessary borohydride hydrolysis.

36 MATERIALS SCIENCE↗

The pathfinder X-Ray axion telescope for the International Axion Observatory (IAXO) and axion searches at the CERN Axion Solar Telescope (CAST)

The axion, a hypothetical pseudo-scalar particle proposed by Peccei and Quinn to resolve the strong CP problem in quantum chromodynamics, remains one of the most compelling dark matter candidates. Axions and Axion-Like Particles (ALPs) are characterized by a broad and largely unconstrained parameter space in mass and coupling strength, motivating extensive experimental searches. The International Axion Observatory (IAXO) is a next-generation axion helioscope designed to achieve over an order of magnitude improvement in sensitivity to the axion-photon coupling constant gaγ relative to previous experiments such as the CERN Axion Solar Telescope (CAST). IAXO will employ large-scale superconducting magnets, precision x-ray optics, and ultra-low-background detectors to search for solar axions produced primarily via the Primakoff effect. This work presents the design and performance of the IAXO pathfinder x-ray optic, a technological demonstrator that validated the optical concepts for IAXO through axion searches at CAST. Comprehensive ray-tracing simulations and experimental measurements were conducted to assess the optic's effective area, detection efficiency, and background suppression capabilities. Deployed at CAST in conjunction with Micromegas and GridPix detectors, the Pathfinder demonstrated record-setting sensitivity to both gaγ and the axion-electron coupling gae, establishing the most stringent laboratory constraints on solar axions to date. These results confirm the viability of the IAXO optical design and detector concept, providing a critical technological benchmark that informs the ongoing development of the BabyIAXO and full-scale IAXO telescopes.

47 OTHER INSTRUMENTATION↗

Facility design consideration for continuous mix production of class 1.3 propellant

In November of 1989, NASA awarded the Advanced Solid Rocket Motor (ASRM) contract to Lockheed Missiles and Space Company (LMSC) for production of advanced solid rocket motors using the continuous mix process. Aerojet ASRM division (AAD) was selected as the facility operator and RUST International Corporation provided the engineering, procurement, and construction management services. The continuous mix process mandates that the mix and cast facilities be 'close-coupled' along with the premix facilities, creating unique and challenging requirements for the facility designer. The classical approach to handling energetic materials-division into manageable quantities, segregation, and isolation-was not available due to these process requirements and quantities involved. This paper provides a description of the physical facilities, the continuous mix process, and discusses the monitoring and detection techniques used to mitigate hazards and prevent an incident.

Williamson, K. L.↗

Feasibility of Actively Cooled Silicon Nitride Airfoil for Turbine Applications Demonstrated

Nickel-base superalloys currently limit gas turbine engine performance. Active cooling has extended the temperature range of service of nickel-base superalloys in current gas turbine engines, but the margin for further improvement appears modest. Therefore, significant advancements in materials technology are needed to raise turbine inlet temperatures above 2400 F to increase engine specific thrust and operating efficiency. Because of their low density and high-temperature strength and thermal conductivity, in situ toughened silicon nitride ceramics have received a great deal of attention for cooled structures. However, the high processing costs and low impact resistance of silicon nitride ceramics have proven to be major obstacles for widespread applications. Advanced rapid prototyping technology in combination with conventional gel casting and sintering can reduce high processing costs and may offer an affordable manufacturing approach. Researchers at the NASA Glenn Research Center, in cooperation with a local university and an aerospace company, are developing actively cooled and functionally graded ceramic structures. The objective of this program is to develop cost-effective manufacturing technology and experimental and analytical capabilities for environmentally stable, aerodynamically efficient, foreign-object-damage-resistant, in situ toughened silicon nitride turbine nozzle vanes, and to test these vanes under simulated engine conditions. Starting with computer aided design (CAD) files of an airfoil and a flat plate with internal cooling passages, the permanent and removable mold components for gel casting ceramic slips were made by stereolithography and Sanders machines, respectively. The gel-cast part was dried and sintered to final shape. Several in situ toughened silicon nitride generic airfoils with internal cooling passages have been fabricated. The uncoated and thermal barrier coated airfoils and flat plates were burner rig tested for 30 min without and with air cooling. Without cooling, the surface temperature of the flat plate reached approximately 2350 F. Starting with computer aided design (CAD) files of an airfoil and a flat plate with internal cooling passages, the permanent and removable mold components for gel casting ceramic slips were made by stereolithography and Sanders machines, respectively. The gel-cast part was dried and sintered to final shape. Several in situ toughened silicon nitride generic airfoils with internal cooling passages have been fabricated. The uncoated and thermal barrier coated airfoils and flat plates were burner rig tested for 30 min without and with air cooling. Without cooling, the surface temperature of the flat plate reached approximately 2350 F. With cooling, the surface temperature decreased to approximately 1910 F--a drop of approximately 440 F. This preliminary study demonstrates that a near-net-shape silicon nitride airfoil can be fabricated and that silicon nitride can sustain severe thermal shock and the thermal gradients induced by cooling and, thus, is a viable candidate for cooled components.

Bhatt, Ramakrishna T.↗

Separate effects identification via casting process modeling for experimental measurement of U–Pu–Zr alloys

Computational simulations of gravity casting processes for metallic U–Pu–Zr nuclear fuel rods have been performed using a design-of-experiments technique to determine the fluid flow, liquid heat transfer, and solid heat transfer parameters which most strongly influence the process solidification speed and fuel rod porosity. The results are used to make recommendations for the best investment of experimental time and effort to measure process parameters.

99 GENERAL AND MISCELLANEOUS↗