Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CLAYS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21
All sourcesNASA NTRSDOE OSTI
NASA NTRS1979

Eolian sedimentation on earth and Mars - Some comparisons

Eolian sediments on earth are mostly formed from quartz. The quartz particles originally came from a granitic source. With respect to eolian sediments on Mars, it appears that an entirely different set of criteria must apply, but some critical parameters can be usefully compared. Impact experiments with basalt in eolian abrasion devices suggest that basalt sand-sized particles fragment rapidly to produce silt and clay-sized detritus. Cohesive forces must be more effective on Mars since the gravitational contribution to the bond/weight ratio is lower. Compared to the terrestrial situation, both larger and smaller particles can be expected to make significant contributions to eolian sediments on Mars. The low gravity and the high speed of moving particles and the relative weak rock material of which they are composed will allow large-scale fine particle production.

Smalley, I. J.↗
NASA NTRS1980

Meteoroid ablation spheres from deep-sea sediments

The paper deals with an examination of spheres that are magnetically extracted from mid-Pacific abyssal clays that are up to half a million years old. The spheres are divided into three groups using their dominant mineralogy - namely, iron, glassy, and silicate. Most spheres were formed from particles that completely melted as they separated from their parent meteoroids during the ablation process. It is concluded that the mineralogy and composition of the deep-sea spheres are identical in many respects to the meteorite fusion crusts, laboratory-created ablation debris, and the ablated interplanetary dust particles in the stratospheric collection.

Blanchard, M. B.↗
NASA NTRS1979

Calculational investigation of impact cratering dynamics - Early time material motions

Early time two-dimensional finite difference calculations of laboratory-scale hypervelocity (6 km/sec) impact of 0.3 g spherical 2024 aluminum projectiles into homogeneous plasticene clay targets were performed and the resulting material motions analyzed. Results show that the initial jetting of vaporized target material is qualitatively similar to experimental observation. The velocity flow field developed within the target is shown to have features quite similar to those found in calculations of near-surface explosion cratering. Specific application of Maxwell's analytic Z-Model (developed to interpret the flow fields of near-surface explosion cratering calculations), shows that this model can be used to describe the flow fields resulting from the impact cratering calculations, provided that the flow field center is located beneath the target surface, and that application of the model is made late enough in time that most of the projectile momentum has been dissipated.

Thomsen, J. M.↗
NASA NTRS1979

Mars surface composition from reflectance spectroscopy - A summary

Visible and near-infrared reflectance spectra and multispectral maps of the Martian surface are discussed, and implications of the data for the composition of the Martian surface are considered. Spacecraft and earth-based telescopic observations have confirmed the generally bimodal albedo distribution of the planet, dividing the surface into bright and dark regions. Mars spectra are characterized by the presence of strong Fe(+3) absorption, which is attributed to various ferric oxide minerals. Interpretations of the spectra from the dark regions indicate a basaltic or ultramafic source rock. Evidence for water ice or a highly desiccated metal hydrate has been obtained, along with evidence for CO2-ice only in the south polar cap. Mariner 9 observations of Martian dust suggest the presence of rather acidic rock or mineral particles, or a montmorillonite-type clay. Prospects for the future study of Martian surface composition include continuing earth-based spectrophotometric studies, and high-spectral-resolution mapping of a significant portion of the surface by the Galileo spacecraft and the next Mars mission.

Singer, R. B.↗
NASA NTRS1980

Infrared reflectance spectra of asteroids - A search for water of hydration

Infrared reflectance spectra have shown the presence of an absorption feature in the 3-4 micron region for seven C and U asteroids. By comparison with laboratory spectra of terrestrial silicates and meteorites, it is concluded that this band is probably due to water in the form of hydrated salts and silicates (clay minerals), implying that the surface material of these asteroids may be analogous to the CI and CM carbonaceous chondritic meteorites. The presence of other hydrated minerals, however, cannot be ruled out. The depths of the water bands in the spectra vary from asteroid to asteroid, though no asteroid spectrum shows a band as deep as was detected on 1 Ceres. On four other C asteroids, no water band was detected. The implications of these observations for the mineralogy of these asteroids are discussed

Lebofsky, L. A.↗
NASA NTRS1979

Heterogeneous phase reactions of Martian volatiles with putative regolith minerals

The chemical reactivity of several minerals thought to be present in Martian fines is tested with respect to gases known in the Martian atmosphere. In these experiments, liquid water is excluded from the system, environmental temperatures are maintained below 0 C, and the solar illumination spectrum is stimulated in the visible and UV using a xenon arc lamp. Reactions are detected by mass spectrometric analysis of the gas phase over solid samples. No reactions were detected for Mars nominal gas over sulfates, nitrates, chloride, nontronite clay, or magnetite. Oxidation was not observed for basaltic glass, nontronite, and magnetite. However, experiments incorporating SO2 gas an expected product of volcanism and intrusive volatile release - gave positive results. Displacement of CO2 by SO2 occurred in all four carbonates tested. These reactions are catalyzed by irradiation with the solar simulator. A calcium nitrate hydrate released NO2 in the presence of SO2. These results have implications for the cycling of atmospheric CO2, H2O, and N2 through the regolith.

Clark, B. C.↗
NASA NTRS1979

Simulation of the Viking biology experiments - An overview

In the present paper, ground-based investigations of the Viking Martian biology data, which have resulted in reasonable simulations of these data, are reviewed. These simulations, which in strong oxidants, UV-treated materials, iron-containing clays, or iron salts were used as Martian analogs, are capable of explaining the ambiguity between the GCMS (gas-chromatography mass-spectrometry) experiments, in which no organic compounds were found on Mars, and the Labeled Release experiments, in which added organics were decomposed.

Klein, H. P.↗
NASA NTRS1979

Laboratory simulations of the pyrolytic release experiments - An interim report

During its operation on Mars the pyrolytic release experiment (PR) detected the fixation of small amounts of CO2 and/or CO. Laboratory simulations of the experimental conditions were made in an attempt to substantiate the previous conclusion that these reactions were chemical rather than biological. After pretreatment and incubation under various conditions, pyrolytic analysis was used to indicate the extent of surface catalyzed conversion of (C-14)O2 or (C-14)O to (C-14)-organic compounds. This abiotic synthesis was detected in experiments with three iron oxides, viz. hematite, magnetite and maghemite. When the incubation atmosphere was supplemented with water vapor, the levels of synthesis were in a range comparable to that detected in the Viking PR tests. An abiotic synthesis was also detected in experiments with a mixture of clays and minerals (Mars analog soil) or with montmorillonite artificially enriched in iron. With either substratum the reaction appeared to be the result of a photocatalytic synthesis of (C-14)-organics from (C-14)O and surface hydroxyl groups. This process was not dependent on the presence of water vapor in the incubation atmosphere. Although a duplication of the Viking data has not been achieved, these findings support the abiotic interpretation of the PR results.

Hubbard, J. S.↗
NASA NTRS1980

A simulation model of temperature transitory on rocks having different thermal inertia. Analysis of the theoretical capacity of rock discrimination by remote sensing data

The possibility of identifying ground surface material by measuring the surface temperature at two different and significant times of the day was investigated for the case of hypothetical island whose rocky surface contained no vegetation and consisted of dolomite, clay, and granite. The thermal dynamics of the soil surface during a day in which atmospheric conditions were average for a latitude of about 40 deg to 50 deg were numerically simulated. The line of separation between zones of different materials was delineated by the range of temperature variation. Results show that the difference between maximum and minimum value of the temperature of ground surface during the day is linked to the thermal inertia value of the material of which the rock is formed.

Cassinis, R.↗
NASA NTRS1980

An empirical model for the complex dielectric permittivity of soils as a function of water content

Recent measurements on the dielectric properties of soils have shown that the variation of dielectric constant with moisture content depends on soil types. The observed dielectric constant increases only slowly with moisture content up to a transition point. Beyond the transition it increases rapidly with moisture content. The moisture value at transition region was found to be higher for high clay content soils than for sandy soils. Many mixing formulas reported in the literature were compared with, and were found incompatible with, the measured dielectric variations of soil-water mixtures. A simple empirical model was proposed to describe the dielectric behavior of the soil-water mixtures. This model employs the mixing of either the dielectric constants or the refraction indices of ice, water, rock, and air, and treats the transition moisture value as an adjustable parameter. The calculated mixture dielectric constants from the model were found to be in reasonable agreement with the measured results over the entire moisture range of 0-0.5 cu cm/cu cm. The transition moistures derived from the model range from 0.16 to 0.33 and are strongly correlated with the wilting points of the soils estimated from their textures. This relationship between transition moisture and wilting point provides a means of estimating soil dielectric properties on the basis of texture information.

Wang, J. R.↗
NASA NTRS1980

Effect of texture on microwave emission from soils

The intensity brightness temperature, T(B), of the microwave emission from the soil is determined primarily by its dielectric properties. The large difference between the dielectric constant of water and that of dry soil produces a strong dependence of the soil's dielectric constant on its moisture content. This dependence is effected by the texture of the soil because the water molecules close to the particle surface are tightly bound and do not contribute significantly to the dielectric properties. Since this surface area is a function of the particle size distribution (soil texture), being larger for clay soils with small particles, and smaller for sandy soils with larger particles, the dielectric properties will depend on soil texture. This dependence has been demonstrated by laboratory measurements of the dielectric constant for soils which are briefly summarized. The dependence of the microwave emission on texture is demonstrated by measurements of T(B) from an aircraft platform for a wide range of soil textures. It is concluded that the effect of soil texture differences on the observed T(B) values can be normalized by expressing the soil moisture values as a percentage of field capacity for the soil.

Schmugge, T. J.↗
NASA NTRS1980

Hydrothermal alteration of impact melt sheets with implications for Mars

A model of the interaction of water with an impact melt sheet is constructed to explain the presence of hydrothermal alteration, fluid flow channels, and the redistribution of volatile elements in terrestrial melt sheets. A calculation of the amount of water vaporized beneath a melt sheet with a large fraction of melt results in a maximum total steam/melt sheet ratio of 23% by weight. The model also applies to Martian impact melt sheets, which have a total volume greater than a global layer 60 m thick. Hydrothermal circulation of steam in Martian melt sheets may have produced iron-rich alteration clays, ferric hydroxides, and near-surface accumulations of salts. The ability of vapor-dominated hydrothermal systems to concentrate sulfate relative to chloride is consistent with the high sulfate to chloride ratio found in the Martian soil by the Viking landers. A major fraction of the Martian soil may consist of the erosion products of hydrothermally altered impact melt sheets.

Newsom, H. E.↗
NASA NTRS1981

On the original igneous source of Martian fines

The composition of the silicate portion of Martian regolith fines indicates derivation of the fines from mafic to ultramafic rocks, probably rich in pyroxene. Rock types similar in chemical and mineralogical composition include terrestrial Archean basalts and certain achondrite meteorites. If these igneous rocks weathered nearly isochemically, the nontronitic clays proposed earlier as an analog to Martian fines could be formed. Flood basalts of pyroxenitic lavas may be widespread and characteristic of early volcanism on Mars, analogous to maria flood basalts on the moon and early Precambrian basaltic komatiites on earth. Compositional differences between lunar, terrestrial, and Martian flood basalts may be related to differences in planetary sizes and mantle compositions of the respective planetary objects.

Baird, A. K.↗
NASA NTRS1981

Weathering of Mars - Antarctic analog studies

Subaerial extrusion of lavas above permafrost is proposed as a possible weathering regime leading to the presence of Martian surface fines, and the characteristics of this process are examined through a study of the analogous altered terrestrial basalts from Antarctica. On the basis of mineralogical and petrological analyses of samples obtained from core cuttings recovered by the Dry Valley Drilling Program from rocks predominantly of an aklalic basalt-phonolite suite, it is found that in the absence of liquid water, weathering is geologically slow, and that zeolites predominate over clays as secondary mineral. Of the possible weathering processes proposed for Mars, it is concluded that both subaerial extrusion and subpermafrost intrusion of lavas involving liquid water would be less important volumetrically than the hydrothermal alteration of impact melt sheets if water were present during an intense phase of early bombardment, or than subsequent solid-gas alteration reactions. It is thus predicted that the present Martian fines should contain a major contribution from the ancient crust as typified by the southern cratered highlands, and a lesser contribution from the younger basaltic lavas.

Berkley, J. L.↗
NASA NTRS1981

Altered basaltic glass - A terrestrial analog to the soil of Mars

In order to understand the nature of weathering processes and the formation of clay-like substances on Mars, analogous terrestrial processes and materials have been examined including sideromelane and palagonite. It is shown that palagonite is a good analog to the soil of Mars to the level of precision available from Viking and ground-based telescopic spectral measurements. Points of resemblance between the two materials include bulk chemical composition, particle size, reflectance spectra, and magnetic properties. A mechanism for the formation of Martian soil, based on a palagonite model, is proposed.

Allen, C. C.↗
NASA NTRS1981

Real-time observation of X-ray diffraction patterns with the Lixiscope

The feasibility of the Lixiscope (Low Intensity X-ray Imaging Scope) is demonstrated for real-time observation of transmission Laue patterns. Making use of the high-gain capability of microchannel plate (MCP) visible-light image intensifier tubes, X-ray images are converted to visible-light images by a scintillator. Pb discs are taped to the center of the Lixiscope input face, and crystal samples are held on a goniometer stage with modeling clay. With a compact size to facilitate off axis viewing, and real-time viewing to allow instantaneous response, the Lixiscope may prove useful in dynamic studies of the effects of plastic flows, stresses, high pressures, and low temperatures.

Chung, D. Y.↗
NASA NTRS1982

Portable Radiometer Identifies Minerals in the Field

Hand-held optical instrument aids in identifying minerals in field. Can be used in exploration for minerals on foot or by aircraft. The radiometer is especially suitable for identifying clay and carbonate minerals. Radiometer measures reflectances of mineral at two wavelengths, computes ratio of reflectances, and displays ratio to user.

Goetz, A. F. H.↗
NASA NTRS1981

International market assessment of stand-alone photovoltaic power systems for cottage industry applications

The final result of an international assessment of the market for stand-alone photovoltaic systems in cottage industry applications is reported. Nonindustrialized countries without centrally planned economies were considered. Cottage industries were defined as small rural manufacturers, employing less than 50 people, producing consumer and simple products. The data to support this analysis were obtained from secondary and expert sources in the U.S. and in-country field investigations of the Philippines and Mexico. The near-term market for photovoltaics for rural cottage industry applications appears to be limited to demonstration projects and pilot programs, based on an in-depth study of the nature of cottage industry, its role in the rural economy, the electric energy requirements of cottage industry, and a financial analysis of stand-alone photovoltaic systems as compared to their most viable competitor, diesel driven generators. Photovoltaics are shown to be a better long-term option only for very low power requirements. Some of these uses would include clay mixers, grinders, centrifuges, lathes, power saws and lighting of a workshop.

Philippi, T. M.↗