Ternary CoPtAu Nanoparticles as a General Catalyst for Highly Efficient Electro;#8208;oxidation of Liquid Fuels
Abstract not provided
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Abstract not provided
Abstract A well‐defined aluminium‐bound hydroxyl group on the surface of mesoporous SBA‐15, [(≡Si−O−Si≡) (≡Si−O) 2 Al−OH], 3 was obtained by reacting di‐isopropyl aluminium hydride with SBA‐15 treated at 700 °C. The resulting surface [(≡Si−O−Si≡) (≡Si−O) 2 Al (isobutyl) fragment undergoes β‐H elimination at 400 °C leading to [(≡Si−O−Si≡)(≡Si−O−) 2 Al−O) Al−H]. Further oxidation of this Al‐hydride with N 2 O leads to 3 . This acidic support was used to create a well‐defined surface organo‐tungsten fragment [(≡Si−O−Si≡)(≡Si−O−) 2 Al−O−W(≡C t Bu)(CH 2 tBu) 2 ] by reacting 3 with W(≡C‐ t Bu)(CH 2 ‐ t Bu) 3 . A further reaction with hydrogen under mild conditions afforded the tungsten carbyne bis‐hydride [(≡Si−O−Si≡)(≡Si−O−) 2 Al−O−W(H) 2 (≡C‐ t Bu)]. The performance of each of the W‐supported catalysts was assessed for propane metathesis in a flow reactor at 150 °C. [(≡Si−O−Si≡)(≡Si−O−) 2 Al−O−W(≡C t Bu)(H) 2 ] was found to be a single‐site catalyst, giving the highest turnover number (TON=800) and the highest reported selectivity for butane (45 %) vs . ethane (32 %) known for oxide‐supported tungsten complex catalysts (with the supports being silica, silica‐alumina, and alumina). The results demonstrate that modification of the oxide ligands on silica via the creation of Al Lewis acid center as an anchoring site for organometallic complexes opens up new catalytic properties, markedly enhancing the catalytic performance of supported organo‐tungsten species.
Single-site molybdenum dioxo catalysts, fullerenol/MoO 2 , are prepared via grafting precursor (DME)MoO 2 Cl 2 onto a highly polyhydroxylated fullerene (ful) and an isomerically-pure and well-defined fullerene (ful*). These catalyst structures are characterized by ICP-OES, XPS, XANES, EXAFS, DRIFT, Raman, and NMR spectroscopy, and DFT. Mo 3d 5/2 XPS and Mo K-edge XANES assign the oxidation state as Mo(VI). Mo EXAFS data fitting reveals two Mo=O double and two Mo–O single bonds at distances of 1.7 and 1.9 Å, respectively, while an Mo=O stretchingl mode is observed at ~950 cm –1 by DRIFT and Raman spectroscopy. These data align well with DFT computational results, supporting the proposed catalyst structure as Fullerene(-μ-O-) 2 M(=O) 2 . Additionally, DFT provides insight into the energetically favorable grafting sites for an isomerically pure fullerenol. The scope of fullerenol/MoO 2 mediated alkene epoxidation includes abiotic alkenes, natural occurring terpenes, and conjugated olefins. For cyclooctene the rate law is first-order in [Mo], near first order in [olefin] and zero-order in [t-butyl hydroperoxide]. A plausible reaction mechanism involves peroxide addition first and then cyclooctene addition directly across the peroxo bond forming the epoxide product, consistent with DFT computation. Overall, fullerenol/MoO 2 shows promise as a sustainable and structurally well-defined system with versatile catalytic activity and good epoxidation recyclability.
Sulfonated carbons were explored as functionalized supports for Ni nanoparticles to hydrodeoxygenate (HDO) phenol. Both hexadecane and water were used as solvents. The dual-functional Ni catalysts supported on sulfonated carbon (Ni/C-SO3H) showed high rates for phenol hydrodeoxygenation in liquid hexadecane, but not in water. Glucose and cellulose were precursors to the carbon supports. Changes in the carbons resulting from sulfonation of the carbons resulted in variations of carbon sheet structures, morphologies and the surface concentrations of acid sites. While the C-SO3H supports were active for cyclohexanol dehydration in hexadecane and water, Ni/C-SO3H only catalyzed the reduction of phenol to cyclohexanol in water. The state of 3 – 5 nm grafted Ni particles was analyzed by in situ X-ray absorption spectroscopy. The results show that the metallic Ni was rapidly formed in situ without detectable leaching to the aqueous phase, suggesting that just the acid functions on Ni/C-SO3H are inhibited in presence of water. Using in situ IR spectroscopy, it was shown that even in hexadecane, phenol HDO is limited by the dehydration step. Thus, phenol HDO catalysis was further improved by physically admixing C-SO3H with the Ni/C-SO3H catalyst to balance the two catalytic functions. The minimum addition of 7 wt.% C-SO3H to the most active of the Ni/C-SO3H catalysts enabled nearly quantitative conversion of phenol and the highest selectivity (90%) towards cyclohexane in 6 h, at temperatures as low as 473 K, suggesting that the proximity to Ni limits the acid properties of the support.
Graphene quantum dots/Mn-N-TiO 2 /g-C 3 N 4 (GQDs/TCN) composite photocatalysts have been designed, synthesized and characterized by XRD, SEM, TEM, Raman, BET, and XPS. The photodegradation of organic pollutants (p-nitrophenol, diethyl phthalate and ciprofloxacin, called as 4-NP, CIP and DEP, respectively) coupled with simultaneous photocatalytic production of hydrogen was successfully achieved using the GQDs/TCN catalysts. The 5%GQDs/TCN-0.4 sample shows the best photocatalytic hydrogen production and organic pollutant degradation rate under simulated solar irradiation in the simultaneous photocatalytic oxidation and reduction system. Furthermore, the photocatalytic H 2 evolution rates in the solution of 4-NP, CIP and DEP are all larger than that in pure water system over the 5%GQDs/TCN-0.4 catalyst. And the H 2 evolution rate in the solution of 4-NP is smaller than that in the solutions of CIP and DEP. Accordingly, the photodegradation rate of 4-NP is larger than that of CIP and DEP. The analyses of density functional theory and liquid chromatography mass spectrometry indicate that some photogenerated electrons were used in the photodegradation process of 4-NP but not in that of CIP and DEP. And it leads to the photocatalytic rate of H 2 evolution in the 4-NP solution smaller than that in the solution of CIP and DEP. For the first time, the present work illuminates the photocatalytic enhancement of the GQDs/TCN-0.4 catalyst and the mechanism of the effect of different organic pollutants on photocatalytic H 2 evolution.
Designing high–performance catalysts that can stabilize catalytic active sites against sintering to deactivation at temperature higher than 900°C is significant but challenging. In this work, we report a new strategy to obtain a transition metal oxide catalyst with high temperature stability for CO oxidation. This is achieved through a synergistic interfacial interaction at the interface of a heterostructure between high– entropy oxides (HEO, high temperature stability) and CuCeO x (catalytic site). The catalytic site (CuCeO x ) for CO oxidation is realized by dissolving an amount of Cu species in HEO into CeO 2 via an entropy–driven mechanochemical process. In situ XRD and HAADF–STEM have confirmed the high temperature stability of the heterostructure CuCeO x –HEO, which can remain its CO oxidation catalytic activity at elevated temperatures. It should be expected that this innovative will offer the potential to the synthesis of catalysts with high temperature stability in industry.
Not Available
Abstract not provided
Multi-walled carbon nanotubes (MCNTs) were used as a support for Rh-based catalysts for high pressure (20 bar) CO hydrogenation. 3 wt% Rh/CNTs catalysts were loaded with 1 wt% and 2 wt% Mn promoter, respectively, in order to study the effect of metal–promoter interactions for ethanol synthesis. Both STEM and EXAFS results showed ≈1 nm Rh particles in promoted as well as the unpromoted catalysts, STEM and EELS results verified the enhanced metal–promoter interaction when the amount of Mn promoter increased from 1 wt% to 2 wt%. The enhancement in the degree of metal–promoter interaction leads to an increase in the ethanol selectivity. Moreover, due to the nature of CNTs (low Z number), the Mn–Rh interactions could be observed at atomic resolution during the STEM–EELS characterization, and the promoter phase is confirmed as Mn(II) oxide by XANES and EELS.
Not Available