Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CALCINATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Lattice thermal expansion of the solid solutions (La{sub 1−x}Sm{sub x}){sub 2}Ce{sub 2}O{sub 7}

Highlights: • Sm-doped La{sub 2}Ce{sub 2}O{sub 7} was prepared by the coprecipitation–calcination method. • In situ HT-XRD measurements revealed that is much stable than 8YSZ. • Its thermal expansion is better than 8YSZ. - Abstract: A series of solid solutions with the general formula (La{sub 1−x}Sm{sub x}){sub 2}Ce{sub 2}O{sub 7} (0.0 ≤ x ≤ 1.0) were prepared by the coprecipitation–calcination method. The products obtained were characterized by powder X-ray diffraction for phase purity. It was observed that La{sup 3+} and Sm{sup 3+} can form complete solid solution in (La,Sm){sub 2}Ce{sub 2}O{sub 7} with defect-fluorite-type phase. The unit cell parameters of these solutions were calculated by a least squares method and the lattice parameters decreased linearly as x increased. The lattice thermal expansion behavior of (La{sub 1−x}Sm{sub x}){sub 2}Ce{sub 2}O{sub 7} (0.0 ≤ x ≤ 1.0) was investigated by high-temperature X-ray diffraction in the temperature range 298–1623 K. The lattice parameters a{sub T} of all the solutions at different temperature can be expressed as a{sub T} = a + bT + cT{sup 2}. As x < 1, the thermal expansion has a sudden decrease at ca. 473 K. The coefficients of lattice thermal expansion of Sm{sub 2}Ce{sub 2}O{sub 7} were 10.2–13.6 × 10{sup −6} K{sup −1} from 298 to 1623 K, and without the thermal contraction at low temperature. The materials show positive or negative thermal expansion due to the asymmetric anharmonic vibration.

36 MATERIALS SCIENCE↗

Cobalt–iron nano catalysts supported on TiO{sub 2}–SiO{sub 2}: Characterization and catalytic performance in Fischer–Tropsch synthesis

Graphical abstract: The Co–Fe/TiO{sub 2}–SiO{sub 2} catalysts were prepared. The prepared catalysts were tested for light olefins and C{sub 5}–C{sub 12} production. The best operational conditions are 250 °C, H{sub 2}/CO = 1/1 under 5 bar pressure. - Highlights: • The TiO{sub 2}–SiO{sub 2} supported cobalt–iron catalysts were prepared via sol–gel method. • The best operational conditions were 250 °C, GHSV = 2000 h{sup −1}, H{sub 2}/CO = 1/1 and 5 bar. • The (Co/Fe)/TiO{sub 2}–SiO{sub 2} is efficient catalyst for light olefins and C{sub 5}–C{sub 12} production. - Abstract: A series of Co–Fe catalysts supported on TiO{sub 2}–SiO{sub 2} were prepared by the sol–gel method. This research investigated the effects of (Co/Fe) wt.%, the solution pH, different Co/Fe molar ratio, calcination conditions and different promoters on the catalytic performance of cobalt–iron catalysts for the Fisher–Tropsch synthesis (FTS). It was found that the catalyst containing 35 wt.% (Co–Fe)/TiO{sub 2}–SiO{sub 2} (Co/Fe molar ratio is 80/20) promoted with 1.5 wt.% Cu and calcined in air atmosphere at 600 °C for 7 h with a heating rate of 3 °C min{sup −1} is an optimal nano catalyst for converting synthesis gas to light olefins and C{sub 5}–C{sub 12} hydrocarbons. The effects of operational conditions such as the H{sub 2}/CO ratio, gas hourly space velocity (GHSV), different reaction temperature, and reaction pressure were investigated. The results showed that the best operational conditions for optimal nano catalyst are 250 °C, GHSV = 2000 h{sup −1}, H{sub 2}/CO molar ratio 1/1 under 5 bar total pressure. Catalysts and precursors were characterized by, X-ray diffraction (XRD), scanning electron microcopy (SEM), thermal gravimetric analysis (TGA), differential scanning calorimetry (DSC), temperature program reduction (TPR) and N{sub 2} adsorption–desorption measurements.

36 MATERIALS SCIENCE↗

Facile solution-precipitation assisted synthesis and luminescence property of greenish-yellow emitting Ca{sub 6}Ba(PO{sub 4}){sub 4}O:Eu{sup 2+} phosphor

Highlights: • Ca{sub 6}Ba(PO{sub 4}){sub 4}O:Eu{sup 2+} phosphor was prepared by the solution-precipitation assisted route. • The phosphors have satisfactory smooth grain surface and particle size. • It shows greenish-yellow color emission (maximum at 540 nm) upon blue light excitation. • Eu{sup 2+} is coordinated with isolated oxygen atoms and those from PO{sub 4} polyhedra. - Abstract: Greenish-yellow emitting microcrystalline Ca{sub 6}Ba(PO{sub 4}){sub 4}O:Eu{sup 2+} phosphor was successfully prepared by a solution-precipitation assisted high temperature reaction method. Phase structure, morphology and/or luminescence properties of the precursor and the as-prepared phosphors were characterized. The phase-pure Ca{sub 6}Ba(PO{sub 4}){sub 4}O:Eu{sup 2+} phosphors were obtained with smooth grain surface and particle size of 2–8 μm. Ca{sub 6}Ba(PO{sub 4}){sub 4}O:Eu{sup 2+} exhibits bright greenish-yellow color emission with its maximum at 540 nm upon UV-blue light excitation. The maximum position of the broad emission band is independent on the calcination temperature. The emission intensity increases with increasing calcination temperature due to improved crystallinity. Besides, the presence of two Eu{sup 2+} emission centers in the Ca{sub 6}Ba(PO{sub 4}){sub 4}O crystal lattice was confirmed and the coordination effects are considered concerning the roles of isolated O atoms and those from the PO{sub 4} tetrahedra.

36 MATERIALS SCIENCE↗

Role of annealing temperature on cation ordering in hydrothermally prepared zinc aluminate (ZnAl2O4) spinel

Highlights: • Investigation of the structural anomaly in Zinc Aluminate Spinel/ZAS (ZnAl{sub 2}O{sub 4}) by chemically inducing the defects by annealing temperature and synthetic pressure. • Hydrothermal synthesis of ZnAl{sub 2}O{sub 4} at 240 °C from nitrate precursors. • Study of the role of annealing temperature (300–900 °C) in tuning cation ordering. • Rietveld analysis of powder X-ray diffraction patterns and Raman spectroscopy to showcase disorder-order transition in ZnAl{sub 2}O{sub 4} spinels. - Abstract: Spinels (AB{sub 2}O{sub 4}) form a niche class of ceramics, which is rich in structural (dis)ordering due to the inherent mixing between the constituent tetrahedral and octahedral sites. The cations (A and B) can form antisite defects under the influence of external parameters like pressure, temperature and nuclear irradiation. The current study reports the formation and evolution of disorder-order structural transition in hydrothermally prepared zinc aluminate spinel ZnAl{sub 2}O{sub 4}. The effect of final calcination temperature (300–900 °C for 9 h) on the degree of cation ordering has been investigated with powder X-ray diffraction, Raman and {sup 27}Al solid-state NMR spectroscopy. Rietveld refinement revealed a gradual disorder to order structural transition accompanied by lower inversion parameter (i{sub s}) and smaller lattice parameter (a) with higher calcination temperature. It was further affirmed by Raman analysis and solid-state NMR spectroscopy probing the ZnO{sub 4} and AlO{sub 4} tetrahedra in spinel. Independent of the degree of cation ordering, nanometric particle size with high surface area was observed in ZnAl{sub 2}O{sub 4} spinel.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Novel preparation of an ancient ceramic pigment BaCuSi4O10 and its performance investigation

Highlights: • The BaCuSi{sub 4}O{sub 10} (Chinese blue) was prepared firstly by coprecipitation and hydrothermal process at 180 °C for 20 h, and then sintered at 800 °C, resulting in pigment with superior performance. • The as-prepared pigment possesses bright blue coloration, preferable flower-like mesoporous microspheres morphology and qualified purity. • This novel process could fabricate the BaCuSi{sub 4}O{sub 10} pigment with broadband optical absorption and better emission in the near-infrared region. • This novel process decreases the calcination temperature compared with the traditional solid state method and also lowers the hydrothermal temperature and time compared with only a sole hydrothermal process. - Abstract: The BaCuSi{sub 4}O{sub 10} (Chinese blue) was prepared by coprecipitation and hydrothermal process at 180 °C for 20 h prior to sintering at 800 °C with a final pigment of superior performance. The crystalline configuration and microstructure of the product were characterized by XRD, FTIR, SEM and TEM. The electronic structure and the valence situation were determined by XPS. The coloration was studied with colorimeter. The absorption and the luminescence properties were examined with an UV−VIS-NIR spectrometer and a spectrofluorimeter, respectively. The results show that the BaCuSi{sub 4}O{sub 10} pigment prepared by this combined fabrication process possesses flower-like mesoporous microspheres morphology, better crystallization, clear coloration and rather qualified purity. The as-prepared BaCuSi{sub 4}O{sub 10} pigment also shows well optical property with broadband absorption and better emission in the 800–1200 nm range. Compared with traditional solid state fabrication or only sole hydrothermal process, this novel process can also reduce hydrothermal temperature and time, and decrease calcination temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Leaf-templated synthesis of hierarchical AgCl-Ag-ZnO composites with enhanced visible-light photocatalytic activity

Highlights: • Leaf-templated AgCl-Ag-ZnO composites were obtained. • The catalysts exhibit excellent visible-light photoctalytic activity. • Electrons and holes of catalyst are efficiently separated. - Abstract: In this paper, poplar leaf is used as a template to synthesize hierarchical AgCl-Ag-ZnO composites via a calcination method. Zn(NO{sub 3}){sub 2} and AgNO{sub 3} are selected as precursors. During the calcination of the templates, Zn{sup 2+} ions react with oxygen to produce ZnO nanoparticles (NPs), Cl{sup −} ions in leaf cells combine with the external Ag{sup +} ions to form AgCl, and Ag{sup +} ions are reduced by reducing agents in leaf to Ag NPs. The morphology, structure and visible-light response of the as-prepared hierarchical AgCl-Ag-ZnO composites are determined. The composites exhibit a strong photocatalytic activity toward the degradation of Rhodamine B (RhB) under visible-light irradiation. The AgCl-Ag-ZnO composites display an enhanced photocatalytic activity, compared with the leaf-templated AgCl-Ag and ZnO. A photocatalytic mechanism is proposed, based on the efficient separation of photoexcited electron-hole pairs due to the surface plasmon resonance (SPR) effect of metal Ag.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Zn/ZnO dendrites arising the heat-treatment of Zn dendrites and their photocatalytic reduction of Cr(VI)

Highlights: • Zn/ZnO dendrites are prepared by an electrodeposition and subsequent annealing route. • The annealing temperature strongly affects the molar ratio of Zn/ZnO in the product. • As-prepared products can be used as the photocatalysts for the reduction of Cr(VI). • Zn/ZnO-200 presents the strongest photocatalytic activity for the reduction of Cr(VI). - Abstract: An electrodeposition-calcination route was designed for the preparation of Zn/ZnO dendrites in this work. Zn dendrites were first deposited at room temperature via a potentiostatic electrodeposition route at the potential of −1.5 V for 10 min. Then, Zn/ZnO dendrites were obtained through calcining Zn dendrites in air at 100–400 °C for 30 min. The produced Zn/ZnO dendrites were labeled as Zn/ZnO-N (N = 100, 200, 300 and 400). The investigations showed that the as-obtained Zn/ZnO-200 dendrites exhibited the strongest photocatalytic activity for the reduction of Cr (VI)–Cr (III) under the radiation of 460 mW cm{sup −2} white light from a Xenon lamp. Within 16 min, ∼92% of Cr (VI) was reduced when Zn/ZnO-200 was used as the photocatalyst. Also, the as-obtained Zn/ZnO-200 catalyst owned good stability. After six cycles, the catalytic efficiency had only slight decrease, which is favorable for reducing the cost in the practical application.

36 MATERIALS SCIENCE↗

Hydrothermal synthesis of bismuth niobates and their application in azo-dyes photo-discoloration

Highlights: • A new method of synthesis for obtaining pure phase bismuth niobates is proposed. • α-BiNbO{sub 4} and β-BiNbO{sub 4} were obtained by the calcination of an amorphous precursor. • Nanosized bismuth niobates have shown high band gap energies (3.2–3.4 eV). • Bismuth niobates are very efficient in the photo-discoloration of methyl orange. - Abstract: Bismuth niobates were obtained by hydrothermal synthesis using bismuth (III) nitrate pentahydrate [Bi(NO{sub 3}){sub 3}·5H{sub 2}O] and a Lindqvist potassium hexaniobate [K{sub 8-x}H{sub x}Nb{sub 6}O{sub 19}.nH{sub 2}O] as soluble precursors. Pure crystalline Bi{sub 5}Nb{sub 3}O{sub 15}, β-BiNbO{sub 4} and α- BiNbO{sub 4} were obtained as pure phases through co-precipitation at pH = 8, followed by hydrothermal treatment and calcination at 600, 700 or 800 °C, respectively, which are milder temperatures than those used in solid state, citrate sol-gel and ball milling methods. Band gap energies of α-BiNbO{sub 4} and β-BiNbO{sub 4} were estimated by UV–vis diffuse reflectance spectroscopy (DRS) as 3.2–3.4 eV, which are higher than experimental values reported in the literature. The materials were evaluated in the methyl orange azo-dye photo-discoloration under UV irradiation and complete bleach was attained. The triclinic phase presented a better efficiency as a photocatalyst than the orthorhombic phase. Unexpectedly, the mixture of both phases resulted in the highest photocatalytic efficiency, similar to that found for Degussa P25 commercial catalyst.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Modified inverse micelle synthesis for mesoporous alumina with a high D4 siloxane adsorption capacity

In this work, mesoporous aluminas (MAs) with uniform and monomodal pores were fabricated via a modified inverse micelle synthesis method, using a non-polar solvent (to minimize the effect of water content) and short reaction time (for a fast evaporation process). The effects of reaction times (4–8 h), surfactant chain lengths (non-ionic surfactants), and calcination temperatures and hold times (450–600 °C; 1–4 h) on the textural properties of MA were studied. Additionally, the targeted pore sizes of MA were obtained in the range of 3.1–5.4 nm by adjusting the surfactant and reaction time. The surface area and pore volume were controlled by the calcination temperature and hold time while maintaining the thermal stability of the materials. The tuned MA of the large mesopore volume achieved 168 mg/g octamethylcyclotetrasiloxane (D4 siloxane) adsorption capacity, a 32% improvement compared to commercially activated alumina. Finally, after three adsorption recycles, the synthesized MA still maintained approximate 85% of its original adsorption capacity, demonstrating a sustainable adsorption performance and high potential for related industrial applications.

25 ENERGY STORAGE↗

Graphene/TiO2 Nanocomposites: Synthesis, Characterization and Application in Hydrogen Evolution from Water Photocatalytic Splitting

A series of titanium dioxide and graphene sheets (GSs) composites were synthesized with a sol-gel method using tetrabutyl titanate and graphite oxide (GO) as the starting materials. The obtained TiO2/GSs photocatalysts are characterized by X-ray diffraction, N2 adsorption analysis, Raman spectroscopy, transmission electron microscopy, X-ray photoelectron spectroscopy and ultraviolet-visible (UV-vis) diffuse reflectance spectroscopy. The photocatalytic activity of the as-prepared samples was evaluated by hydrogen evolution from water photocatalytic splitting under UV-vis illumination. The influence of GSs content and calcination atmosphere on the photocatalytic activity was also investigated. The results show that both GSs content and the calcinations atmosphere can affect the photocatalytic activity of the obtained composites.

08 HYDROGEN↗

A high-throughput reaction system to measure the gas-phase photocatalytic oxidation activity of TiO{sub 2} nanotubes

A sixteen-channel, high-throughput system was designed and built to test the activity of catalysts for gas-phase photocatalytic oxidation of methanol. The system utilizes granular catalyst films to model relevant applications and allow for rapid processing. It is capable of 48 catalyst tests per day using the procedure described herein. Several experiments were performed to minimize both the within-node and between-node variances of the system. Utilizing the high-throughput system, the significance of preparation methods on the photocatalytic activity of TiO{sub 2} nanotubes was investigated. A one-half fractional factorial experiment identified the factors that significantly impact catalyst activity as the following: precursor type (Degussa P-25, or nanotubes), platinum loading, the interaction between precursor and dope time, and the interaction between the precursor and calcination temperature. Based on experimental results, catalyst activity is optimized by doping TiO{sub 2} nanotubes directly (rather than doping P-25 prior to nanotube formation), a low platinum loading (0.01 wt %), and using a dope time of 30 min followed by calcination at 773 K. The optimum catalyst preparation conditions produced a catalyst that was three times more active than the starting P-25 material.

36 MATERIALS SCIENCE↗

Phase evolutions and electrical properties in BaTiO{sub 3}-BaFe{sub 0.5}Nb{sub 0.5}O{sub 3} ceramics

In this work, BaFe{sub 0.5}Nb{sub 0.5}O{sub 3}(BFN) was added to BaTiO{sub 3}(BT) to form the solid solution. The investigation of phase evolution, physical properties and electrical properties of the binary system (1-x)BT-xBFN where x = 0, 0.2, 0.4 and 0.6 was carried out. The BT and BFN powders were prepared separately using a calcination technique with optimum calcinations temperature for producing both BT and BFN powders. XRD results revealed that the BT-BFN ceramics with BFN content of x less than 0.4 contain the ferroelectric tetragonal perovskite phase whereas the composition with BFN content of x 0.6 changes symmety to the cubic phase. From the evidences including phases, microstructures and ferroelectric and dielectric data of the BT-BFN ceramics, it is inferred that the morphotropic phase boundary occurs around the composition ox = 0.4.

36 MATERIALS SCIENCE↗

Enhanced piezoelectricity and high temperature poling effect in (1-x)Pb(Mg{sub 1/3}Nb{sub 2/3})O{sub 3}-xPbTiO{sub 3} ceramics via an ethylene glycol route

A solution chemical method utilizing ethylene glycol as solvent has been developed to prepare the ceramics of (1-x)Pb(Mg{sub 1/3}Nb{sub 2/3})O{sub 3}-xPbTiO{sub 3}[(1-x)PMN-xPT] from a precursor powder that can be pressed and fired in one step to produce high quality ceramics with excellent piezoelectric properties. The ceramics reach a relative density of up to 97% of the theoretical value after direct calcinations. This high density is achieved without the need of additional sintering after calcination which is usually required in conventional solid state syntheses to produce ceramics. The ceramics exhibit a unipolar piezoelectric coefficient d{sub 33} of 848 pC/N, which is one of the highest values for any unmodified/untextured binary systems reported to date. Since the piezoelectric properties depend on composition and electric field, the effect of poling conditions was investigated. A critical temperature limit has been found, above which poling can dramatically impair the piezoelectric properties due to a field-induced increase in the monoclinic phase component around the morphotropic phase boundary.

36 MATERIALS SCIENCE↗

Morphological Control and Characterization of Monodispersed Ceria Particles

The morphological control of cerium oxide particles was carried out by a homogeneous precipitation followed by calcination in air at 400 deg. C. The effects of pre-aging temperature, aging time and precipitation reagents on the morphologies of final products were investigated. When urea was used as a precipitation reagent, monodispersed spherical and flake-like cerium carbonate hydroxide precursor was precipitated in the solution at 90 deg. C for 2 h after pre-aging at 25 deg. C - 50 deg. C for 24-72 h. On the other hand, monodispersed nanosize rod-like cerium hydroxide particles were obtained using triethanolamine as precipitation reagent. Ceria particles with the same morphologies and slightly smaller particle size than those of as-prepared cerium precursor could be obtained after calcination in air at 400 deg. C. Physical-chemical characteristics of the monodispersed cerium oxide particles were evaluated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Monoclinic crystal structure of polycrystalline Na{sub 0.5}Bi{sub 0.5}TiO{sub 3}

Bismuth-based ferroelectric ceramics are currently under intense investigation for their potential as Pb-free alternatives to lead zirconate titanate-based piezoelectrics. Na{sub 0.5}Bi{sub 0.5}TiO{sub 3} (NBT), one of the widely studied compositions, has been assumed thus far to exhibit the rhombohedral space group R3c at room temperature. High-resolution powder x-ray diffraction patterns, however, reveal peak splitting in the room temperature phase that evidence the true structure as monoclinic with space group Cc. This peak splitting and Cc space group is only revealed in sintered powders; calcined powders are equally fit to an R3c model because microstructural contributions to peak broadening obscure the peak splitting.

36 MATERIALS SCIENCE↗

Optical properties of undoped and Mg doped CuCrO{sub 2} powders synthesized by sol-gel route

In this work, CuCrO{sub 2} was synthesized by sol-gel method using citric acid as a gelling agent. The different parameters like ratio of citric acid to metal ions, calcination temperature, and duration were studied. A green colored powder with particle size around 300 nm was formed at the calcination temperature of 800 °C for four hours duration. The increase in temperature has a profound impact on crystallite size and in turn effected the optical properties. Band gap of the obtained CuCrO{sub 2} has varied from 2.3 to 1.7 eV by increasing the temperature from 800 °C to 900 °C. Doping studies were performed by introducing Mg{sup 2+} ion to substitute Cr{sup 3+} in CuCrO{sub 2}. X-ray powder diffraction and SEM studies on 2% Mg doped samples indicated a clear formation of side phases. According to the X-ray powder patterns, the reflections from side phases were increasing with the increase in doping concentrations of Mg from 2 to 5%. The side phases were found to be MgCr{sub 2}O{sub 4} spinel and CuO. The band gap has decreased for doped samples in comparison to undoped one. In this paper, sol-gel synthesis and characterization by Xray powder diffraction, SEM studies and UV-Vis-Diffuse Reflectance spectra are presented.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A simple dissolved metals mixing method to produce high-purity MgTiO{sub 3} nanocrystals

A simple dissolved metals mixing method has been effectively used to produce high-purity MgTiO{sub 3} (MT) nanocrystals. The method involves the mixing of independently dissolved magnesium and titanium metal powders in hydrochloric acid followed by calcination. The phase purity and nanocrystallinity were determined by making use of laboratory x-ray diffraction data, to which Rietveld-based analyses were performed. Results showed that the method yielded only one type magnesium titanate powders, i.e. MgTiO{sub 3}, with no Mg{sub 2}TiO{sub 4} or MgTi{sub 2}O{sub 5} phases. The presence of residual rutile or periclase was controlled by adding excessive Mg up to 5% (mol) in the stoichiometric mixing. The method also resulted in MT nanocrystals with estimated average crystallite size of 76±2 nm after calcination at 600°C and 150±4 nm (at 800°C). A transmission electron micrograph confirmed the formation of the nanocrystallites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Positron annihilation characteristics in mesostructural silica films with various porosities

Porous silica films with various porosities were prepared via a sol-gel method using a nonionic amphiphilic triblock copolymer F127 as the structure-directing agent. Doppler broadening of positron annihilation radiation (DBAR) spectra were collected for the prepared films using a variable energy slow positron beam. Different linear relationships between positron annihilation line shape parameters S and W are found for the as-deposited films and calcined ones, indicative of the decomposition of the copolymer porogen in the as-deposited films upon calcination. This also reveals the variation of positron annihilation sites as a function of F127 loading or porosity. Strong correlations between positronium 3γ annihilation fraction, S parameter and porosity of the mesoporous silica films with isolated pores are obtained, which may provide a complementary method to determine closed porosities of mesoporous silica films by DBAR.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗