Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “BEAM LOSS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

Measurement techniques using the electron beam profile scanner at the Fermilab Main Injector

This work presents techniques for non-invasive transverse profile measurements of high-intensity proton beams using an Electron Beam Profile Scanner (EBPS). The EBPS utilizes low-energy electrons as a probe to analyze the transverse size of proton beams, allowing for potential analysis on a single-bunch basis. Recent upgrades to the Fermilab Main Injector have enhanced beam power on target to 1 MW, with future developments targeting 2 MW. The higher beam power has increased the demand for non-invasive diagnostics, as invasive methods can disrupt operations.The techniques presented include 1) the slow scan technique, which serves as a proof of concept for the probe beam, 2) the one-shot scan technique for measuring horizontal beam profiles, and 3) the raster scan technique for analyzing horizontal beam profiles as a function of the longitudinal distribution of the beam. The profiles obtained will be crucial for studying and understanding instabilities in high-power, high-intensity proton beams. This will contribute to optimizing the operation of high-power proton accelerators by minimizing beam loss, activation, and damage to both the diagnostics and the accelerator components.

Mwaniki, Matilda [IIT, Chicago]↗

Design Considerations and Operational Features of the Collimators for the Fermilab Main Injector and Recycler

The Fermilab Main Injector system delivers 700 kW of 120 GeV Proton beam for neutrino experiments. Since 2013 this has been achieved using slip stacking accumulation in the Recycler with up to 12 batches from the Fermilab Booster per Main Injector Ramp Cycle. To control activation from beam loss, collimation systems in the Booster to Recycler transfer line, in the Recycler and in the Main Injector are employed. Residual radiation measurements around the ring with detailed studies at the collimators are required to maintain adequate loss control. We will review design considerations, operational parameters and activation results for more than ten years of operation. Simulations with MARS15 are used to explore the activation rates and the isotopic composition of the resulting activation.

43 PARTICLE ACCELERATORS↗

SRF Cavity Instability Detection with Machine Learning at CEBAF

During the operation of CEBAF, one or more unstable superconducting radio-frequency (SRF) cavities often cause beam loss trips while the unstable cavities themselves do not necessarily trip off. Identifying an unstable cavity out of the hundreds of cavities installed at CEBAF is difficult and time-consuming. The present RF controls for the legacy cavities report at only 1 Hz, which is too slow to detect fast transient instabilities. A fast data acquisition system for the legacy SRF cavities is being developed which samples and reports at 5 kHz to allow for detection of transients. A prototype chassis has been installed and tested in CEBAF. An autoencoder based machine learning model is being developed to identify anomalous SRF cavity behavior. The model is presently being trained on the slow (1 Hz) data that is currently available, and a separate model will be developed and trained using the fast (5 kHz) DAQ data once it becomes available. This paper will discuss the present status of the new fast data acquisition system and results of testing the prototype chassis. This paper will also detail the initial performance metrics of the autoencoder model.

Carpenter, A.↗

Evaluating a Transition-jump System for the Fermilab Main Injector Using Xsuite

We describe an Xsuite simulation framework for the Fermilab Main Injector (MI) along with an evaluation of transition-crossing behaviors in the accelerator. In particular, we studied the introduction of quadrupole magnets into the lattice as part of a transition-jump system that will be implemented through the $2^{nd}$ Proton Improvement Plan (PIP-II). Simulated beam losses spurred by transition-induced instabilities were assessed under several systematic effects, including MI quad errors, magnet-to-magnet variability in the jump magnets, power-supply errors, and timing jitter.

Schreckenberger, A. P. [Fermilab] (ORCID:000000016↗

Dynamic aperture studies at the Fermilab recycler ring

As part of the Proton Improvement Plan II (PIP-II), Fermilab aims to increase beam intensity delivered to neutrino experiments. In this context, higher intensity injection into the Recycler Ring enhances space charge effects, pushing operations closer to third-order resonances. These resonances reduce the Dynamic Aperture (DA), leading to increased beam loss. This study presents simulations of DA as a function of tune in the Recycler Ring, incorporating chaos indicators such as the Reversibility Error Method (REM) and Frequency Map Analysis (FMA). The effectiveness of existing resonance mitigation strategies is evaluated by quantifying their ability to delay DA degradation. Additionally, the study examines how space charge detuning and DA limitations dictate viable operational tune points for the Recycler Ring.

Gonzalez-Ortiz, Cristhian [Fermilab]↗

Update to the Generic Shielding Criteria

Generic shielding criteria have been employed at Fermilab to determine the shielding adequacy and to screen for areas which require more detailed analysis of beam loss events and are based on the calculations reported in technical report TM-1140. The calculations in that report were done 30 years ago using CASIM, a Monte Carlo program. CASIM uses the Hagedorn-Ranft to model inclusively hadronic interactions. It is valid in the energy range of 10 GeV to 20 TeV and has a lower momentum threshold of 300 MeV/c (47 MeV kinetic energy for nucleons). The goal of this study is to update the original soil shielding calculation with those estimated from the MARS code, which has a more robust and detailed physics model. Hadron-nuclear interactions are simulated with a combination of the modern theoretical models (CEM and LAQGSM) and up-to-date phenomenological models. All other processes of particle interactions with matter are described in MARS on the basis of the modern models and algorithms. MARS is valid for hadrons, leptons, photons and heavy ions with kinetic energy less than 100 TeV and greater than 1 keV (greater than 0.0215 eV for neutrons).

43 PARTICLE ACCELERATORS↗

Shielding Analysis of the 22BM-FIS/MET Beampipe Penetration

The purpose of this report is to determine the shielding required, both on the inside and outside of the penetration through the storage ring shielding, which is required for the FIS/MET beamlines IR beampipe. The aim is to ensure that the dose rates in the occupied areas near the penetration comply with the NSLS-II shielding policy [1] for both normal and abnormal beam loss conditions.

36 MATERIALS SCIENCE↗

Rachet Door Shielding Design Calculations

The ratchet wall at the experimental floor side will have sliding doors to provide access to beamline front ends during installation and maintenance. The thickness and design of these sliding doors should provide shielding equivalence of the concrete thickness of the ratchet wall. Each of the sliding doors will be a composite to provide effective shielding from neutron and gamma radiation, emanating from beam losses inside the storage ring.

36 MATERIALS SCIENCE↗

Comparison of Analytical Calculations for NSLS-II Booster Bulk Shielding with FLUKA Monte-Carlo Program

The dose rate calculations (normal operational beam loss) for the NSLS II 3.0 GeV booster ring bulk shielding like lateral wall and roof have been carried out by FLUKA. The FLUKA Monte Carlo results were compared with the prior analytical results based on thick target approximation [1]. The results showed that for most cases the analytical calculations are conservative compared with FLUKA for photon dose estimations. However the neutron dose from analytical calculations is lower than FLUKA for some cases because additional photon-neutron interactions in the shielding material are ignored in analytical calculations.

36 MATERIALS SCIENCE↗

Dose rates near the Service Buildings for Al, Cu, Fe and Pb targets

Fluka simulations were performed to model fault conditions that result in the electron beam hitting different materials found in the storage ring (SR), namely aluminum in beam pipes, copper in magnet coils, iron in magnet yokes and lead in local shields. The primary goal of the simulations was to determine dose distributions outside the bulk shielding due to beam losses for different fault conditions. These predicted doses can be used to provide guidance regarding the need for additional shielding or administrative safeguards. A secondary goal was to compare the simulated dose at three different locations with the dose obtained from analytical calculations using the thick target approximation. The analytical calculations are quick and easy and do not require detailed modeling of the geometry. If these calculations can indeed provide reasonably accurate estimates of the dose then they can be used instead of the detailed FLUKA simulations which require more time, effort and computational resources. However the assumptions embedded in the analytical methods result in the maximum possible yield of secondary particles and will therefore overestimate the radiation dose and the radiation shielding required.

36 MATERIALS SCIENCE↗

Resonant Extraction for Mu2e

Charged Lepton Flavor Violations (CLFVs) are probed in an attempt to search Beyond Standard Model (BSM) Physics. The sensitive channel available for experiments around the world is to probe through muons. No conclusive evidence of CLFV is found so far but $\mutoe$ experiment at Fermi National Accelerator Laboratory (Fermilab) aims to improve the current experimental sensitivity by searching for $\mu^{-}N \longrightarrow e^{-}N$ transition. To provide the high intensity beam that can be handled to achieve desired sensitivity, slow spill using resonant extraction is used at the accelerator complex. Understanding the motivations behind the experiment and simulating the crucial stage in the beam delivery system is the main focus of this thesis. Work presented here will have a qualitative analysis and simulation of resonant extraction at the Delivery Ring (Fermilab), using the beam parameters of $\mutoe$ to study various factors that contribute to the successful beam transport tow ards the Target and Detector System, including meeting intensity requirements while keeping the beam losses to a minimum.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

PART 2: Initial Beam Dynamics Results of an Integrated and Compact 1.3 GHZ Superconducting Radio Frequency (SRF) Electron Source

This paper is the continuation of a technical paper which is called “Detailed Electromagnetic Design of an Integrated and Compact 1.3 GHz Superconducting Radio Frequency (SRF) Electron Source” [1]. In the previous paper, we examined if a promising RF electromagnetic design of the gun and cathode region could be achieved. Further, we examined if this gun region could be fully integrated, in terms of the electromagnetic RF design, with the rest of the accelerator, keeping in mind the overall goal of compactness and reduction of duplicative infrastructure commonly associated with separated function electron guns and structures. While we convinced ourselves thus far that the RF electromagnetic design of our concept is feasible, we also needed to perform particle tracking to assess the beam properties through the entire system, understand and remediate any beam loss. For this step, we examined the cathode region and analyzed the gating process of the thermionic cathode, as losses would most likely be attributed to releasing electrons into the accelerating structure during an unfavorable phase window.

43 PARTICLE ACCELERATORS↗

Modeling Transverse Space Charge effects in IOTA with pyORBIT

The role and mitigation of space charge effects are important aspects of the beam physics research to be performed at the Integrable Optics Test Accelerator (IOTA) at Fermilab. The impact of nonlinear integrability (partial and complete) on space charge driven incoherent and coherent resonances will be a new feature of this accelerator and has the potential to influence the design of future low energy proton synchrotrons. In this report we model transverse space charge effects using the PIC code pyORBIT. First we benchmark the single particle tracking results against MADX with checks on symplecticity, tune footprints, and dynamic aperture in a partially integrable lattice realized with a special octupole string insert. Our space charge calculations begin with an examination of the 4D symplecticity. Short term tracking is done first with the initial bare lattice and then with a matching of the rms values with space charge. Next, we explore slow initialization of charge as a technique to establish steady state and reduce emittance growth and beam loss following injection into a mismatched lattice. We establish values of space charge simulation parameters so as to ensure numerical convergence. Finally, we compare the simulated space charge induced tune shifts and footprints against theory.

43 PARTICLE ACCELERATORS↗

Accelerator Transport Lattice Design Issues for High Performance ERLs

We will discuss issues in the design, construction, and operation of accelerator lattices for use in ERLs. These include phase space quality preservation during generation, acceleration, and transport of high-power, high-brightness beams, appropriate configuration of beam properties for synchrotron radiation users across a spectral range spanning THz to X-ray, beam handling during energy recovery, management of instabilities and "stray" power arising from the beam's coupling to itself and to environmental impedances and wakes, and provision for large acceptance (through the use of appropriate nonlinear optics) for the control of degraded "spent" beam and suppression of halo-driven beam loss. Experience derived from Jefferson Lab operation of five ERLs - across an energy range of 20 MeV to 1 GeV - will be described. Notice: Authored by Jefferson Science Associates, LLC under U.S. DOE Contract No. DE-AC05-06OR23177. The U.S. Government retains a non-exclusive, paid-up, irrevocable, world-wide license to publish or reproduce this manuscript for U.S. Government purposes.

Benson, Stephen↗

Beam Optics Studies for Larger Beampipe Diameters for the LAMP-PSR

The proposed beampipe diameter increase of the PSR beamlines for the LAMP PSR upgrade is expected decrease beam loss due to tuning errors and misalignment. However, a larger beampipe diameter would require increasing the pole-to-pole gap height within all magnets in the PSR (dipole gap, quadrupole bore, etc.). This would in turn affect the extent and profile of the fringe fields at the ends of the magnets, altering the effective length of the magnets and thus the magnetic optics. In this work, we used the simulation code MAD-X to model the PSR lattice for different beampipe diameters. The results of these simulations will be later used to benchmark particle simulations using the code pyORBIT. The MAD-X simulations are described, and the simulation results are discussed in this technote.

43 PARTICLE ACCELERATORS↗

SRF Cavity Instability Detection with Machine Learning at CEBAF

During the operation of CEBAF, one or more unstable superconducting radio-frequency (SRF) cavities often cause beam loss trips while the unstable cavities themselves do not necessarily trip off. Identifying an unstable cavity out of the hundreds of cavities installed at CEBAF is difficult and time-consuming. The present RF controls for the legacy cavities report at only 1 Hz, which is too slow to detect fast transient instabilities. A fast data acquisition system for the legacy SRF cavities is being developed which samples and reports at 5 kHz to allow for detection of transients. A prototype chassis has been installed and tested in CEBAF. An autoencoder based machine learning model is being developed to identify anomalous SRF cavity behavior. The model is presently being trained on the slow (1 Hz) data that is currently available, and a separate model will be developed and trained using the fast (5 kHz) DAQ data once it becomes available. This paper will discuss the present status of the new fast data acquisition system and results of testing the prototype chassis. This paper will also detail the initial performance metrics of the autoencoder model.

Carpenter, A.↗

Automated Calibration System for Beam Current Monitor

The Beam Current Monitor (BCM) measures the instantaneous current in a beam. This work aims to develop an automated calibration system for the BCM to address the need for calibration without interrupting beam operation. We strive to create a synchronous calibration method integrated into the master timeline by utilizing the pulsed nature of synchrotrons to run calibration pulses during inter-pulse gaps. This improvement should enhance operational efficiency, ensure safe operation, and help mitigate beam loss, all by enabling intermittent calibration during the operation of the accelerator. This is accomplished by developing a Python program that interfaces with a Keithley 6221 DC and AC source and a Keithley 2182A Nanovoltmeter. The program configures both of these devices to perform a selected mode of the current sweep, allows for the initiation of the current sweep, collects the measured voltage data from the 2182A, stores the collected data to the computer in a CSV file, and graphs the collected data.

Haller, James↗