SEARCH · Engineering Papers

Results for “ADSORBENTS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 379 records · Page 21

All sources NASA NTRS DOE OSTI

NASA NTRS1975

Fluid transport on earth and aeolian transport on Mars

Experimental data on cohesion-free particle transport in fluid beds are applied, via a universal scaling relation, to atmospheric transport of fine grains on Mars. It may be that cohesion due to impact vitrification, vacuum sintering, and adsorbed thin films of water are absent on Mars - in which case the curve of threshold velocity versus grain size may show no turnup to small particle size, and one micron diameter grains may be injected directly by saltation into the Martian atmosphere more readily than 100 micron diameter grains. Curves for threshold and terminal velocities are presented for the full range of Martian pressures and temperatures. Suspension of fine grains is significantly easier at low temperatures and high pressures; late afternoon brightenings of many areas of Mars, and the generation of dust storms in such deep basins as Hellas, may be due to this effect.

Sagan, C.↗

NASA NTRS1975

Chemisorption kinetics of hydrogen on evaporated iron films

An investigation is conducted of the kinetics of isothermal adsorption-desorption processes involving molecular hydrogen which is chemisorbed onto thin (20 to 50 A) polycrystalline Fe films at temperatures near 300 K. The results of the investigation indicate that chemisorption in the H2-Fe system occurs via a precursor state of molecularly adsorbed hydrogen. Contamination of the surface from unknown impurities in the gas phase is found to affect the number of available adsorption sites and to modify the prefactor for the absolute desorption rate constant for the precursor state.

Shanabarger, M. R.↗

NASA NTRS1975

Wear and interfacial transport of material

The paper is a review of adhesion or bonding across an interface between two solids in contact, transfer or transport to one or both surfaces, wear with tangential motion, and the effect of surface films on adhesion, transfer, and wear. The discussion is limited to the case of adhesive wear which deals with the interfacial transport of material from one surface to another. The data presented suggest that the resulting interfacial adhesive bond for metals in contact is generally stronger than the cohesive bond in the cohesively weaker of the two materials so that upon separation of the surfaces transfer will occur from the cohesively weaker material to the cohesively stronger; that with tangential motion of two metal surfaces in contact such as encountered with sliding, rolling, or rubbing contact, the frictional energy can be dissipated in a number of ways, where heating of the surfaces can produce metallurgical changes such as alloying; and that the presence of adsorbed and reacted films on the surface of metals and alloys even in frictions of a monolayer can reduce interfacial bonding, adhesion, and transfer.

Buckley, D. H.↗

NASA NTRS1975

Seasonal buffering of atmospheric pressure on Mars

An isothermal reservoir of carbon dioxide in gaseous contact with the Martian atmosphere would reduce the amplitude and advance the phase of global atmospheric pressure fluctuations caused by seasonal growth and decline of polar CO2 frost caps. Adsorbed carbon dioxide in the upper roughly 10 m of Martian regolith is sufficient to buffer the present atmosphere on a seasonal basis. Available observations and related polar cap models do not confirm or refute the operation of such a mechanism. Implications for the amplitude and phase of seasonal pressure fluctuations are subject to direct test by the upcoming Viking mission to Mars.

Dzurisin, D.↗

NASA NTRS1975

Dust injection into the Martian atmosphere

The sequence of events culminating in a global Martian dust storm is reviewed in the light of current theories on dust storm generation. Based upon experimental results, a mechanism for the initiation of global dust storms on Mars is proposed. According to this mechanism, the diurnal variation of surface temperature results in desorption of adsorbed CO2, which under certain conditions can inject large amounts of fine (1-10 microns) dust into the atmosphere.

Johnson, D. W.↗

NASA NTRS1976

Thermionic work function of /Cs/ZnO

The collector electrode of a thermionic converter requires a material having a low thermionic work function and chemical stability in a Cs atmosphere in the 800-K range. This letter reports that ZnO with an adsorbed Cs film meets these requirements. The work function is approximately 1.3 eV. Various methods of preparing the ZnO film are described as well as an experiment in which Cs was replaced by K.

Sommer, A. H.↗

NASA NTRS1976

Winds on Mars during the Viking season - Predictions based on a general circulation model with topography

The Arakawa-Mintz general circulation model of the earth has been applied to Mars at the season of the Viking Lander mission. Allowance has been made for the effects of the large Martian topography. The calculated wind fields exhibit significant zonally symmetric, topographically forced, and diurnal tidal components. Average wind speeds of 20-25 m/sec were found at three possible landing sites, with wind speeds occasionally reaching values as much as a factor of 2 larger than these average values. If buffering by CO2 adsorbed in the regolith can be neglected, a pressure decline of about 0.8 mb is expected over the first two months of operation of the first lander.

Pollack, J. B.↗

NASA NTRS1975

Storage Stability and Improvement of Intermediate Moisture Foods, Phase 3

Methods were determined for the improvement of shelf-life stability of intermediate moisture foods (IMF). Microbial challenge studies showed that protection against molds and Staphylococcus aureus could be achieved by a combination of antimicrobial agents, humectants and food acids. Potassium sorbate and propylene glycol gave the best results. It was also confirmed that the maximum in heat resistance shown by vegetative pathogens at intermediate water activities also occurred in a solid food. Glycols and sorbitol both achieve browning inhibition because of their action as a medium for reaction and effect on viscosity of the adsorbed phase. Chemical availability results showed rapid lysine loss before visual discoloration occurred. This is being confirmed with a biological test using Tetrahymena pyriformis W. Accelerated temperature tests show that effectiveness of food antioxidants against rancidity development can be predicted; however, the protection factor changes with temperature. BHA was found to be the best antioxidant for iron catalyzed oxidation.

Labuza, T. P.↗

NASA NTRS1976

Low cost silicon solar array project. Task 1: Establishment of the feasibility of a process capable of low cost, high volume production of silane, SiH4

The kinetics of the redistribution of dichlorosilane and trichlorosilane vapor over a tertiary amine ion exchange resin catalyst were investigated. The hydrogenation of SiCl4 to form HSiCl3 and the direct synthesis of H2SiCl2 from HCl gas and metallurgical silicon metal were also studied. The purification of SiH4 using activated carbon adsorbent was studied along with a process for storing SiH4 absorbed on carbon. The latter makes possible a higher volumetric efficiency than compressed gas storage. A mini-plant designed to produce ten pounds per day of SiH4 is described.

Breneman, W. C.↗

NASA NTRS1976

Breadboard CO2 and humidity control system

A regenerable CO2 and humidity control system is being developed for potential use on shuttle as an alternate to the baseline lithium hydroxide (LiOH)/condensing heat exchanger system. The system utilizes a sorbent material, designated HS-C, to adsorb CO2 and water vapor from the cabin atmosphere. The material is regenerated by exposing it to space vacuum. A half-size breadboard system, utilizing a flight representative HS-C canister, was designed, built, and performance tested to shuttle requirements for total CO2 and total humidity removal. The use of a new chemical matrix material allowed significant optimization of the system design by packing the HS-C chemical into the core of a heat exchanger which is manifolded to form two separate and distinct beds. Breadboard system performance was proven by parametric testing and simulated mission testing over the full range of shuttle crew sizes and metabolic loadings. Vacuum desorption testing demonstrated considerable savings in previously projected shuttle vacuum duct sizing.

Boehm, A. M.↗

NASA NTRS1977

Carbon distribution profiles in lunar fines

Radial distribution profiles of elemental carbon in lunar soils consisting of particles in the size range of 50 to 150 microns were investigated. Initial experiments on specimen preparation and the analysis of prepared specimens by Auger electron spectrometry (AES) and scanning electron microscopy (SEM) are described. Results from splits of samples 61501,84 and 64421,11, which were mounted various ways in several specimen holders, are presented. A low carbon content was observed in AES spectra from soil particles that were subjected to sputter-ion cleaning with 960eV argon ions for periods of time up to a total exposure for one hour. This ion charge was sufficient to remove approximately 70 nm of material from the surface. All of the physically adsorbed carbon (as well as water vapor, etc.) would normally be removed in the first few minutes, leaving only carbon in the specimen, and metal support structure, to be detected thereafter.

Hart, R. K.↗

NASA NTRS1977

Evaluation of analytical methodology for hydrocarbons in high pressure air and nitrogen systems

Samples of liquid oxygen, high pressure nitrogen, low pressure nitrogen, and missile grade air were studied to determine the hydrocarbon concentrations. Concentration of the samples was achieved by adsorption on a molecular sieve and activated charcoal. The trapped hydrocarbons were then desorbed and transferred to an analytical column in a gas chromatograph. The sensitivity of the method depends on the volume of gas passed through the adsorbent tubes. The value of the method was verified through recoverability and reproducibility studies. The use of this method enables LOX, GN2, and missile grade air systems to be routinely monitored to determine low level increases in specific hydrocarbon concentration that could lead to potentially hazardous conditions.

Source record↗

NASA NTRS1976

Molecular cluster theory for chemisorption of first row atoms on nickel /100/ surfaces

Self-consistent Hartree-Fock-Slater molecular cluster models for the chemisorption of first-row atoms on Ni(100) surfaces are presented. Energy levels and ground-state charge distributions are given for XNi5 clusters with the adatom X = H, C, N, O located in C4V symmetry at a fixed height of 2.0 au above the surface. The variation of properties with height was studied in detail for the case of oxygen. Theoretical results compare rather well with experimental photoelectron and energy-loss data. Local-densities-of-states diagrams are used to clarify the interaction between adsorbate levels and metal conduction bands.

Ellis, D. E.↗

NASA NTRS1976

NASA thermionic-conversion program

The NASA applied research and technology (ART) program for thermionic energy conversion (TEC) is progressing effectively. Current out-of-core emphases allow converter material and design freedoms previously prohibited by in-core nucleonic and geometric restrictions. As a result, potential improvements indicate possibilities for severalfold increases in efficiencies. The new TEC-ART program concentrated initially on low-work-function collectors and interelectrode-loss reduction and revealed much in a short time. For example, arc-drop studies verified the necessity of stable emitters that operate well with little or no adsorbed cesium. This new emission capability coupled with improved collectors that maintain performance with emitter-vapor deposit accumulations are requisites for efficient, enduring thermionic converters. The accomplishments and contributors in these areas are discussed.

Morris, J. F.↗

NASA NTRS1976

CO2 and humidity removal system for extended Shuttle missions - Equilibrium testing and performance analysis

In Shuttle orbiter cabins, lithium hydroxide (LiOH) canisters are currently planned to be used for CO2 adsorption and condensing heat exchangers for humidity control. In this paper a more effective CO2 and humidity removal method is proposed by replacing the LiOH component with HS-C adsorbent (a polyethylenimine coated acrylic ester), thus eliminating the low temperature constraints on the active thermal control system. Since the adsorption of CO2 and H2O are reversible, a double bed configuration operating cyclicly is planned to provide continuous atmospheric control. Apparatus and the experimental procedure to test the adsorption equilibrium are described and some of the indicative results, tabulated by computers, are presented with the help of exponential expressions and differential equations. By using a computer model of the Shuttle HS-C system, performance predictions are made.

Davis, S. H.↗

NASA NTRS1976

A regenerable CO2 and humidity control system for Shuttle

A regenerable CO2 and humidity control system is presently being developed for potential use on Shuttle as an alternate to the baseline Lithium Hydroxide (LiOH) system. The system utilizes a sorbent material (designated 'HS-C') to adsorb CO2 and water vapor from the cabin atmosphere and desorb the CO2 and water vapor overboard when exposed to a space vacuum. Past development programs concentrated on material development and breadboard system fabrication and testing. The present program calls for the design of a flight prototype system capable of integration into the Shuttle vehicle and the development of major components. This paper will show that a regenerable system utilizing HS-C material trades even with the shuttle LiOH system for the baseline four-man, seven-day mission and offers increased savings up to 448 kg for a seven-man, 30-day mission.

Boehm, A. M.↗

NASA NTRS1976

The possible role of solid surface area in condensation reactions during chemical evolution - Reevaluation

Using surface concentration and reaction rate as the main criteria for the feasibility of condensation reactions, four types of prebiotic environments were analyzed: (1) an ocean-sediment system, (2) a dehydrated lagoon bed produced by evaporation, (3) the surface of a frozen sediment, and (4) a fluctuating system where hydration (rainstorms, tidal variations, flooding) and dehydration (evaporation) take place in a cyclic manner. With the possible exception of nucleotides, low adsorption of organomonomers on sediment surfaces of a prebiotic ocean (pH 8) is expected, and significant condensation is considered unlikely. In dehydrated and frozen systems, high surface concentrations are probable and condensation is more likely. In fluctuating environments, condensation rates will be enhanced and the size distribution of the oligomers formed during dehydration may be influenced by a 'redistribution mechanism' in which adsorbed oligomers and monomers are desorbed and redistributed on the solid surface during the next hydration-dehydration cycle.

Lahav, N.↗

NASA NTRS1975

Migratory gold resistive shorts - Chemical aspects of a failure mechanism

Integrated-circuit devices using the Ti/W/Au metal system are subject to failure mechanisms based on electrolytic corrosion. The migratory gold resistive short (MGRS) failure mode is one example of this mechanism and results in the formation of filamentary or dendritic deposits of gold between adjacent stripes on the IC chip. This reaction requires the presence of a sufficient amount of water, a bias voltage between adjacent stripes, and the activation of the cathodic (-) stripe. Gold ions are transported from anode to cathode through a film of moisture adsorbed on the surface of the chip; halide ions are probably involved in the transfer. Their presence is verified experimentally by X-ray photoelectron spectroscopy. Some of the chemical and electrostatic factors involved in the MGRS mechanism are discussed in this paper, including the questions of a threshold level of moisture and contamination.

Grunthaner, F. J.↗