SEARCH · Engineering Papers

Results for “wetting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

All sources NASA NTRS DOE OSTI

DOE OSTI2022

Examining the peatland shrubification-evapotranspiration feedback following multi-decadal water table manipulation

Northern peatlands are globally important long-term sinks of carbon due to their predominantly saturated conditions. However, these ecosystems are expected to become drier with climate change, potentially leading to shrubification. As such, the response of the shrubification–evapotranspiration (ET) feedback may be of critical importance to future peatland energy, water and carbon dynamics. Here we examined the effect of multi-decadal peatland water table (WT) alteration at three adjacent sites with increasing depth to WT (WET, INTermediate, and DRY). In order to better understand the WT–shrubification–ET feedback, we measured peatland vegetation composition, microtopography and ET partitioning, where ET was measured at the ecosystem, microform, and leaf level using eddy covariance (EC), chambers and porometry, respectively. Averaged across microforms and WT treatments, there was a difference in the median measured leaf resistance (r leaf ) between plant functional types ranging from 213 s m -1 for erect dwarf shrubs, 325 s m -1 for graminoids/sedges, and 520 s m -1 for prostrate dwarf shrubs. Scaled based on LAI, the low r leaf of erect dwarf shrubs dominated hummocks, where sites with a higher proportion of hummocks had lower median canopy resistance (r v ) of 141, 133 and 130 s m -1 at the WET, INT and DRY sites respectively. Nevertheless, ET was highest at the WET site and similar between the INT and DRY sites, with greater evaporation from the moss surface at the WET site. Porometry and EC data along with a three-source model were used to independently assess the evaporative contribution from the moss surface, which ranged from 17% to 40%. For moderate and persistent changes in WT from land-use or climate change, our results suggest vegetation succession is minimal, but the microtopographic development and the concomitant differences in LAI for the various plant functional types is key to understanding changes in total ET and partitioning.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2023

Effect of recycled fibers and shredded intermediates variation on the mechanical properties and energy absorption of fiber‐reinforced composite panels

Abstract The global composite industry generates large quantities of waste which mostly ends up in landfills due to a lack of established end‐use applications for multiple waste streams. The scrap from end‐of‐life (EoL) includes manufacturing waste such as dry chopped fiber tows, loose fibers, shredded fibers from fabric textile operations, cured/semi‐cured prepregs, and fully cured composite structure waste from aircraft, automobiles, wind blades, boats, and pressure vessels. In this work, different composite waste streams were reduced to shredded intermediates, followed by simple blending, and subjected to wet compression molding to produce composite panels. The panels/plaques were tested for mechanical properties (flexure and impact), fiber‐matrix wet‐out, and property bounds. It was found that wet‐compression molding was a viable and scale‐able approach to produce recycled panels from EoL composites shredded scrap. Furthermore, full‐scale size panels for use in truck bodies and intermodal shipping container flooring were manufactured and their impact resistance was tested using a drop weight impact test. They were tested both for high‐ and low‐velocity load. In the case of high‐velocity load, the average impact load was 14,673 N; the average absorbed energy was 101.6 J; the average elastic energy was 11.7 J and the impact resistance was 1065 J/m. In the case of the low‐velocity drop weight impact test, it was found that the average impact load was 7877.358 N; the average absorbed energy was 9.718 J; the average elastic energy was 9.14 J, and the impact resistance was 184.1 J/m. The shredded composite was shown to be a candidate material for the manufacture of truck bodies and intermodal containers’ flooring panels. Highlights By using shredded intermediates from different composite waste streams, it is possible to manufacture composite panels. Wet–compression process is an appropriate technique for manufacturing recycled fiber composite panels. Regardless of the source of scrap, the mechanical properties of the produced composite panels were improved. The recycling process technology can be transformed to commercial scale to produce full‐size transportation flooring panels. A product pathway is established in consideration of lower cost and improved recyclability.

Vaidya, Uday↗

DOE OSTI2023

Embedding ceramic components in metal structures with hybrid directed energy deposition

The combined benefit of both additive and subtractive manufacturing within the same gantry system enables hybrid directed energy deposition to create complex geometries with smooth surface finish and superior dimensional accuracy. Moreover, with layer-by-layer access to the structure during both the addition and subtraction of material, the insertion of components is now possible, assuming the components can survive the high temperatures associated with the subsequent metal deposition. Ceramic inserts are of interest for a variety of reasons including (1) to create complex interwoven ductile/brittle composites for ballistics or high-temperature applications or (2) to integrate high-temperature strain or temperature sensors protected within ceramic substrate subsumed into a larger metal structure. Here, in this work, stainless steel substrates were machined to create an internal cavity for the insertion of a ceramic component. During the investigation of several different over-the-ceramic deposition strategies, components were inserted, and different process sequences were allowed to continue to envelop the inserted ceramic with varying success. Unmelted powder was used to serve both as a thermal buffer and to provide a flush surface upon which the laser cladding could continue. Subsequent depositions were attempted with both dry and wet powder (addition of machining coolant to wet). The wet powder has previously been demonstrated to not significantly impact the mechanical properties of a final structure and provided a thermal barrier to protect the ceramic piece from the extreme temperatures of the final metal deposition. The wetting of the powder provided stability and minimized displacement caused by the powder flow from the laser cladding head. Finally, the use of an oblique angle for laser cladding allowed for the redirection of some fraction of the introduced thermal energy away from the ceramic component and, consequently, improved the survival of the ceramic inserts. With this combination of techniques, ceramic inserts survived full embedding within a 3D-printed stainless steel structure.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Legacies of precipitation influence primary production in Panicum virgatum

Precipitation is a key driver of primary production worldwide, but primary production does not always track year-to-year variation in precipitation linearly. Instead, plant responses to changes in precipitation may exhibit time lags, or legacies of past precipitation. Legacies can be driven by multiple mechanisms, including persistent changes in plant physiological and morphological traits and changes to the physical environment, such as plant access to soil water. Here, we used three precipitation manipulation experiments in central Texas, USA to evaluate the magnitude, duration, and potential mechanisms driving precipitation legacies on aboveground primary production of the perennial C 4 grass, Panicum virgatum. Specifically, we performed a rainout shelter study, where eight genotypes grew under different precipitation regimes; a transplant study, where plants that had previously grown in a rainout shelter under different precipitation regimes were moved to a common environment; and a mesocosm study, where the effect of swapping precipitation regime was examined with a single genotype. Across these experiments, plants previously grown under wet conditions generally performed better than expected when exposed to drought. Panicum virgatum exhibited stronger productivity legacies of past wet years on current-year responses to drought than of past dry years on current-year responses to wet conditions. Additionally, previous year tiller counts, a proxy for meristem availability, were important in determining legacy effects on aboveground production. As climate changes and precipitation extremes—both dry and wet—become more common, these results suggest that populations of P. virgatum may become less resilient.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2021

Evaluation of CMIP6 models in simulating the statistics of extreme precipitation over Eastern Africa

We report the Eastern Africa region experiences frequent extreme precipitation events that can cause destruction of property and environment, and loss of lives. Thus, there is a need to understand how these events may change in the future and how well the global climate models that are used to make projections can simulate precipitation extremes in this region before they can be used in downscaling or flood and drought impact assessment studies. In this work, we evaluated the ability of sixteen Coupled Model Intercomparison Project Phase 6 (CMIP6) models to simulate present-day precipitation extremes over the Eastern Africa region during the two rainy seasons (March–May and September–November). We used nine extreme precipitation indices (including seven (one) indices of wet (dry) extremes) defined by the Expert Team on Climate Change Detection and Indices. The CMIP6 models were evaluated against two gridded observation datasets: Global Precipitation Climatology Project One-Degree Daily Dataset and Tropical Rainfall Measuring Mission Multi-satellite Precipitation Analysis 3B42. Three model performance metrics (percentage bias, normalized root-mean-square error, and pattern correlation coefficient) were employed to further assess the strengths and weakness of the models. Our results show that the multi-model ensemble mean generally provides a better representation of observed precipitation and related extremes compared to individual models when considering all metrics and seasons. Several consistent biases are evident across CMIP6 models, which tend to overestimate the total-wet day precipitation and consecutive wet days, and underestimate very wet days and maximum 5-day precipitation in both seasons. Furthermore, no single model consistently performs best, model performance varies with the season and index under consideration and is generally independent of horizontal resolution.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

Analysis of convection heat transfer on multiscale rough superhydrophobic and liquid infused surfaces

Multiscale rough superhydrophobic or slippery liquid infused porous surfaces have gained much interest in recent years for their improved transport phenomena properties. While there have been several studies on drag reduction and condensation on non-wetting surfaces, convection heat transfer that is important in many thermal and thermochemical applications has not been addressed systematically. Here, this article utilizes a fractal description of rough surface topographies to develop analytical models for the Nusselt number and the thermal hydraulic factor for fluid flow and heat transfer inside a cylinder with non-wetting surfaces. For air-infused superhydrophobic surfaces, the model considers the dynamic stability of the air/fluid interface in the asperities. Using the analytical formulations and the stability criteria, systematic studies are presented on the effects of the fractal surface parameters, cylinder radius and Reynolds number on the convective heat transfer characteristics, from which surface texture design maps are developed for maximizing the convection heat transfer. It is shown that multiscale non-wetting surfaces are most effective in the range of lower Reynolds number and small cylinder radius for achieving the best convective heat transfer and thermal hydraulic performance. Applying the models to actual non-wetting surface topographies fabricated using electrodeposition and chemical etching, it is shown that contrary to prevailing notion, superhydrophobicity, characterized by the highest contact angles, does not always lead to the maximum convective heat transfer performance, and that under certain fluid flow conditions, hydrophobic surfaces may offer a greater thermal performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2026

Elucidating hydrogen isotope transport mechanisms in proton-conducting ceramics with trapping effects using TMAP8

Hydrogen isotopes play an central role in many science and engineering applications such as fuel cells, hydrogen production, and fusion energy. For these applications, hydrogen separation and extraction applications are pivotal aspects of hydrogen transports, where proton-conducting ceramics (PCCs) have shown great potential. In this study, we propose a new model for hydrogen isotope transport in PCC materials, BaZr 0.9 Y 0.1 O 2.95 (BZY) in particular, which captures behavior in both dry and wet environments. The model expands previous efforts and considers diffusion, trapping, and surface reactions (i.e., dissociation and recombination). We then validate and calibrate the model using deuterium transport measurements from experiments in both dry and wet environments. This study highlights the key role of trapping, often neglected, on hydrogen isotope transport in BZY and other PCC materials. It also explains how the commonly observed discrepancy between dry and wet behavior can be attributed to more active surface reactions and saturated traps due to the increased hydrogen presence under the wet environment. These results provide insights to optimize PCC manufacturing and usage as a hydrogen separation and extraction technology in various fields, emphasizing that lowering the trapping can reduce hydrogen isotope retention. These modeling and calibration efforts are performed using the tritium migration analysis program, version 8 (TMAP8), an open-source application designed for hydrogen isotope transport.

36 - MATERIALS SCIENCE↗

DOE OSTI2021

Spatial access and resource limitations control carbon mineralization in soils

Core-scale soil carbon fluxes are ultimately regulated by pore-scale dynamics of substrate availability and microbial access. These are constrained by physicochemical and biochemical phenomena (e.g. spatial access and hydrologic connectivity, physical occlusion, adsorption-desorption with mineral surfaces, nutrient and resource limitations). We conducted an experiment to determine how spatial access and resource limitations influence core-scale SOM mineralization, and how these are regulated by antecedent moisture conditions. Intact soil cores were incubated at field-moist vs. drought conditions, after which they were saturated from above (to simulate precipitation) or below (to simulate groundwater recharge). Soluble C (acetate) and N (nitrate) forms were added to some cores during the rewetting process to alleviate potential nutrient limitations. Respiration showed evidence of C-limitation, as C amendments increased the cumulative CO 2 evolved. Drought and rewetting increased soil respiration, and these soils also exhibited increased complex aromatic molecules in porewater. This newly available substrate appeared to alleviate nutrient limitations on respiration, because there were no further respiration increases with subsequent C and N amendments. We expected that respiration would be influenced by wetting direction, as simulated precipitation would mobilize C from the surface. However, as a main effect, this response was seen only in the C-amended soils, indicating that surface-C may not have been bioavailable. At the pore scale (porewater samples), compared to the baseline soils, drought and the C, N amendments caused a net loss of identified molecules when the soils were rewet from below, whereas wetting from above caused a net increase in identified molecules. This indicates that as soils were wet from below, the fresh inputs simulated the C-and N-limited microbial populations present deeper in the soil profile. Furthermore, our experiment highlights the complex and interactive role of antecedent moisture conditions, wetting direction, and resource limitations in driving core-scale C fluxes.

59 BASIC BIOLOGICAL SCIENCES↗

DOE OSTI2023

Pore Structure and Wettability of Bossier Shale, East Texas, United States: Insights from Integrated Porosimetry, Scattering, and Imbibition Approaches

In this study, ascertaining the pore geometry and wettability characteristics of tight shales is of great significance for revealing the mechanisms of occurrence, migration, and production of shale resources. Taking the Bossier Shale collected from Well A, East Texas, USA, as an example, the pore geometry and wettability behavior in a broad nm-& μm scale pore spectrum were quantified based on integrated techniques, including water immersion porosimetry (WIP), mercury intrusion porosimetry(MIP), (ultra)small-angle X-ray scattering [(U)SAXS], contact angle, and liquid spontaneous imbibition (SI). Mainly owing to differences in the sample sizes used, data interpretation, as well as the detectable pore type (e.g., connected or not) and pore diameter ranges among different methods, sample porosities derived from WIP, MIP, and (U)SAXS were quite different, which range from 7.70 to 13.34%, 5.12 to 9.52%, and 2.48 to 6.44%, respectively. Therefore, a comparison of the porosities derived from different methods must be handled with utmost care. Additionally, although (U)SAXS is an effective technique for detecting both connected and non-connected pores, the fraction of non-connected pores could be underestimated by directly comparing the pore size distribution derived from (U)SAXS and MIP tests. This is because the sample sizes used for and pore information reflected by these two methods are different. Furthermore, the studied Bossier Shales exhibited various contact angle values and imbibition behaviors when using differently polarized liquids, revealing their mixed-wet characteristics. Comprehensively considering the differences in contact angle, imbibition slope, and imbibed liquid volume, three sub-categories of wettability behavior, with respect to more oil-wet, more water-wet, and intermediate mixed-wet, were qualitatively identified.

(U)SAXS↗

DOE OSTI2020

Influence of Clay Wettability Alteration on Relative Permeability

Abstract Understanding the wettability of porous materials is important to model fluid flow in the subsurface. One of the critical factors that influences wetting in real reservoirs is the composition of geologic materials. The wetting properties for clay minerals can have a particularly strong impact on flow and transport. In this work, we analyze the chemical composition of a Mt. Simon sandstone core to resolve the microscopic structure of clay regions and assess how alterations to the local wetting properties influence multiphase transport based on core flooding experiments and relative permeability simulations. We show that whichever fluid has greater affinity toward clay minerals will tend to accumulate within these high surface area regions, leading to dramatic shifts in the relative permeability. This work establishes the essential importance of the mineral composition and associated wetting properties in the modeling of flow and transport in reservoir‐scale systems.

Fan, Ming↗

DOE OSTI2024

Stress Testing California's Hydroclimatic Whiplash: Potential Challenges, Trade‐Offs and Adaptations in Water Management and Hydropower Generation

Abstract Inter‐annual precipitation in California is highly variable, and future projections indicate an increase in the intensity and frequency of hydroclimatic “whiplash.” Understanding the implications of these shocks on California's water system and its degree of resiliency is critical from a planning perspective. Therefore, we quantify the resilience of reservoir services provided by water and hydropower systems in four basins in the western Sierra Nevada. Using downscaled runoff from 10 climate model outputs, we generated 200 synthetic hydrologic whiplash sequences of alternating dry and wet years to represent a wide range of extremes and transitional conditions used as inputs to a water system simulation model. Sequences were derived from upper (wet) and lower (dry) quintiles of future streamflow projections (2030–2060). Results show that carryover storage was negatively affected in all basins, particularly in those with lower storage capacity. All basins experienced negative impacts on hydropower generation, with losses ranging from 5% to nearly 90%. Reservoir sizes and inflexible operating rules are a particular challenge for flood control, as in extremely wet years spillage averaged nearly the annual basins' total discharge. The reliability of environmental flows and agricultural deliveries varied depending on the basin, intensity, and duration of whiplash sequences. Overall, wet years temporarily rebound negative drought effects, and greater storage capacity results in higher reliability and resiliency, and lesser volatility in services. We highlight potential policy changes to improve flexibility, increase resilience, and better equip managers to face challenges posed by whiplash while meeting human and environmental needs.

Environmental Sciences & Ecology↗

DOE OSTI2025

The Role of Wind‐Moisture Characteristics in Shaping Atmospheric River Flood Hazards

Atmospheric rivers (ARs) are key drivers of extreme precipitation in the Western U.S. Using regionally downscaled thermodynamic global warming (TGW) simulations, we examine how ARs with varying wind and moisture characteristics respond to warming. We classified 812 historical AR events into Gusty-Wet, Gusty-Dry, Calm-Wet, and Calm-Dry groups to evaluate differences in precipitation behavior. ARs with stronger winds and higher moisture content exhibit higher precipitation efficiency (PE) and greater integrated water vapor (IWV). Regionally, Calm ARs show higher IWV accumulation due to slower inland transport and reduced PE. Projections indicate increases in storm-total (sub-Clausius-Clapeyron (CC) scaling) and maximum 3-hourly precipitation (super-CC scaling) across all groups, with the most pronounced changes in Gusty-Wet and Calm-Wet ARs. Spatial differences in surface runoff, PE, and inland reach highlight the importance of AR subtype in shaping future flood hazards. These results offer insights into event-level and regional-scale precipitation changes under evolving environmental conditions.

Zhou, Yang [Lawrence Berkeley National Laboratory ↗

DOE OSTI2025

Remote Influence of Andean Convection on Amazonian Rainfall and Its Mechanisms

Models from Coupled Model Intercomparison Project Phase 6 produce too much precipitation over the Andes but too little over the Amazon or the Wet Andes-Dry Amazon (WADA) bias pattern. Unlike the conventional view that convection parameterization and land model deficiencies can contribute to Amazonian rainfall biases, we approach this long-standing biased model behavior through the lens of Andean convection. Using Community Earth System Model v1.1 and focusing on the wet season, our mechanism-denial experiments demonstrate that Andean convection notably reduces precipitation over the Amazon during austral summer. The Andean forced Amazonian response operates on weather timescale. Furthermore, the reduction of Amazonian rainfall is detectable within a few hours after initial Andean forcing. The precipitation response is primarily driven by variations in the moisture budget and is moderated by changes in convective available potential energy over the Amazon. Changes in the total advection of moisture over the Amazon are dominated by the vertical advection term and can be attributed to discrepancies in the dynamic omega field. In the experiments, the Andean east flank region is scrutinized where the vertical velocity and moisture fields play an intermediary role for the Andean driven WADA connection. The Andean forcing induces descending anomalies on the Andean east flank. The disturbances of wind and geopotential fields over the Andean east flank propagate eastward via Kelvin waves. Over the Amazon, descending anomalies and advective drying lead to reduction of mid-to-high level cloud, increase of shortwave cloud forcing and surface net radiation, and enhancement of themodynamic stability and rainfall reduction.

58 GEOSCIENCES↗

DOE OSTI2025

Daytime urban heat stress in North America reduced by irrigation

There is considerable uncertainty regarding the impact of irrigation on heat stress, partly stemming from the choice of heat stress index. Moreover, existing simulations are at scales that cannot appropriately resolve population centres or clouds and thus the potential for human impacts. Using multi-year convection-permitting and urban-resolving regional climate simulations, we demonstrate that irrigation alleviates summertime heat stress across more than 1,600 urban clusters in North America. This holds true for most physiologically relevant heat stress indices. The impact of irrigation varies by climate zone, with more notable irrigation signals seen for arid urban clusters that are situated near heavily irrigated fields. Through a component attribution framework, we show that irrigation-induced changes in wet-bulb temperature, often used as a moist heat stress proxy in the geosciences, exhibit an opposite sign to the corresponding changes in wet bulb globe temperature—a more complete index for assessing both indoor and outdoor heat risk—across climate zones. In contrast, the local changes in both wet-bulb and wet bulb globe temperature due to urbanization have the same sign. Here, our results demonstrate a complex relationship between irrigation and heat stress, highlighting the importance of using appropriate heat stress indices when assessing the potential for population-scale human impacts.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2020

Tutorial review on structure – dendrite growth relations in metal battery anode supports

This tutorial review explains the emerging understanding of the surface and bulk chemistry – electrochemical performance relations in anode supports (aka secondary current collectors, substrates, templates, hosts) for lithium, sodium and potassium metal batteries (LMBs, SMBs or NMBs, and KMBs or PMBs). In relation to each section, the possible future research directions that may yield both new insight and improved cycling behavior are explored. Representative case studies from Li, Na and K metal anode literature are discussed. The tutorial starts with an overview of the solid electrolyte interphase (SEI), covering both the “classic” understanding of the SEI structure and the “modern” insights obtained by site-specific cryogenic stage TEM analysis. Next, the multiple roles of supports in promoting cycling stability are detailed. Without an optimized support architecture, the metal–electrolyte interface becomes geometrically unstable at a lower current density and cycle number. Taking into consideration the available literature on LMBs, SMBs and KMBs, it is concluded that effective architectures are geometrically complex and electrochemically lithiophilic, sodiophilic or potassiophilic, so as to promote conformal electrochemical wetting of the metal during plating/stripping. One way that philicity is achieved is through support oxygen surface chemistry, which yields a reversibly reactive metal–support interface. Examples of this include the well-known oxygen–carbon moieties in reduced graphene oxide (rGO), as well as classic ion battery reversible conversion reaction oxides such as SnO 2 . Unreactive surfaces lead to dewetted island growth of the metal, which is a precursor to dendrites, and possibly to non-uniform dissolution. Surveying the literature on various Li, Na and K metal supports, it is concluded that the key bulk thermodynamic property that will predict electrochemical wetting behavior is the enthalpy of infinite solution (Δ sol H ∞ ) of the metal (solute) into the support (solvent). Large and negative Δ sol H ∞ promotes uniform metal wetting on the support surface, corresponding to relatively low plating overpotential. Positive Δ sol H ∞ promotes dewetted islands and a relatively high overpotential. This simple rule explains a broad range of studies on Li, Na and K metal – support interactions, including the previously reported correlation between mutual solubility and wetting.

25 ENERGY STORAGE↗

DOE OSTI2021

Effect of surface properties and polymer chain length on polymer adsorption in solution

In polymer nanoparticle composites (PNCs) with attractive interactions between nanoparticles (NPs) and polymers, a bound layer of the polymer forms on the NP surface, with significant effects on the macroscopic properties of the PNCs. The adsorption and wetting behaviors of polymer solutions in the presence of a solid surface are critical to the fabrication process of PNCs. In this study, we use both classical density functional theory (cDFT) and molecular dynamics (MD) simulations to study dilute and semi-dilute solutions of short polymer chains near a solid surface. Using cDFT, we calculate the equilibrium properties of polymer solutions near a flat surface while varying the solvent quality, surface–fluid interactions, and the polymer chain lengths to investigate their effects on the polymer adsorption and wetting transitions. Using MD simulations, we simulate polymer solutions near solid surfaces with three different curvatures (a flat surface and NPs with two radii) to study the static conformation of the polymer bound layer near the surface and the dynamic chain adsorption process. Additionally, we find that the bulk polymer concentration at which the wetting transition in the poor solvent system occurs is not affected by the difference in surface–fluid interactions; however, a threshold value of surface–fluid interaction is needed to observe the wetting transition. We also find that with good solvent, increasing the chain length or the difference in the surface–polymer interaction relative to the surface–solvent interaction increases the surface coverage of polymer segments and independent chains for all surface curvatures. Finally, we demonstrate that the polymer segmental adsorption times are heavily influenced only by the surface–fluid interactions, although polymers desorb more quickly from highly curved surfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2020

Compromise of Personal Protective Clothing from Liquid Exposure

Following critiques of multiple personal contamination events from entries into the Oak Ridge National Laboratory’s Spallation Neutron Source transfer bay, it was considered that the most likely causes for contamination were personal protective clothing doffing errors or that moisture (sweat) allowed contamination to wick through the protective clothing. To pursue this issue, radiological protection staff looked more closely, however, at the specific area of the clothing where contamination was highest; under enhanced lighting and photochromic manipulation, there appeared to have been some type of moisture in the area. Recognizing the possibility that moisture may have allowed for migration of contamination through the clothing, further experiments were undertaken to determine under which conditions this transport might have occurred. The objective for this work was to identify the susceptibility of different types of personal protective clothing to various liquids encountered in the workplace.Method: Several tests were performed to determine if perspiration had enabled migration of contamination, and to identify what other liquids might have affected contamination transport. Two layers of personal protective clothing were subjected to static conditions and dynamic conditions, to include active rubbing of the materials while wet. Food dye added to each of the liquids tested enabled visual indications of liquid breakthrough. Additional tests were conducted to see if solid contamination could be transported through the materials along with the liquids. As a result, it was found that all but one type of non-rubberized personal protective clothing in use at Oak Ridge National Laboratory were permanently compromised to some extent by the solvents used for decontamination. It was determined that most common cleaning agents immediately and permanently destroyed the hydrophobic nature of several of the splash-resistant protective clothing materials, allowing for radioactive contamination to penetrate through the material to the worker. Work around wet surfaces or performing wet decontamination will only be performed in protective clothing known to prevent transport of the wetting agent.

61 RADIATION PROTECTION AND DOSIMETRY↗

DOE OSTI2020

Projected End-of-Century Changes in the South American Monsoon in the CESM Large Ensemble

Projected changes in the South American monsoon system by the end of the twenty-first century are analyzed using the Community Earth System Model Large Ensemble (CESM-LENS). The wet season is shorter in LENS when compared to observations, with the mean onset occurring 19 days later and the mean retreat date 21 days earlier in the season. Despite a precipitation bias, the seasonality of rainfall over South America is reproduced in LENS, as well as the main circulation features associated with the development of the South American monsoon. Both the onset and retreat of the wet season over South America are delayed in the future compared to current climate by 3 and 7 days, respectively, with a slightly longer wet season. Central and southeastern Brazil are projected to get wetter as a result of moisture convergence from the strengthening of the South Atlantic low-level jet and a weaker South Atlantic subtropical high. The Amazon is projected to get drier by the end of the century, negatively affecting rain forest productivity. During the wet season, an increase in the frequency and intensity of extreme precipitation events is found over most of South America, and especially over northeastern and southern Brazil and La Plata. Meanwhile, during the dry season an increase in the maximum number of consecutive dry days is found over northeastern Brazil and the northern Amazon.

54 ENVIRONMENTAL SCIENCES↗