Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “well”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

Characterization of cement from a well at Teapot Dome Oil Field: Implications for geological sequestration

Wellbores represent the weakest link in terms of CO 2 storage permanence. As a result, special attention to the numerous existing wells that perforate storage formations is needed. The pre-injection condition of the cement can influence the rate (and type) of alteration by the injected CO 2 plume. The condition of the existing well cement depends on a variety of factors including wellbore/formation and wellbore/brine interactions as well as the composition and type of cement placed in the well (i.e. type of admixtures used, water/solids ratio, sulfate resistant mixes, etc.). In this paper, the details of recovering wellbore cement from an older well to determine pre-injection seal integrity are described. Petrographical and chemical analyses are presented for samples of cement that were retrieved from a 19-year-old well at Teapot Dome in Wyoming. Examination revealed that the retrieved cement had altered as a result of original slurry composition and with respect to the local downhole wellbore environment. Although samples were obtained from a single well, significant differences were observed in their alteration and condition. Sulfate attack resulted in abundant ettringite formation in a cement sample taken adjacent to the Wall Creek sandstone (3060 ft), while cement taken adjacent to the Tensleep formation (5478 ft) was decalcified and enriched in magnesium, owing to reaction of calcium hydroxide in the cement with the dolomitic formation.

42 ENGINEERING↗

Bound and Continuum Intersubband Transitions in Colloidal Quantum Wells

Quantum well intersubband transitions are critical for quantum cascade lasers and infrared photodetectors. Control of band offsets allows bound-to-bound intersubband transitions, with confinement of both initial and final states, and bound-to-continuum transitions, in which only the initial state is energetically confined within the potential well. Both types of transitions are also achieved in colloidal CdSe wells by changing the heterostructure shell. Bare wells have narrow intersubband transitions spanning the near-infrared spectrum following effective mass predictions. Atomically precise core/shells enable a readily adjusted potential well for electrons. For CdSe/ZnS, bound-to-bound transitions are narrow and redshift with shell thickness. By contrast, broad bound-to-continuum absorptions are found in CdSe/CdS. Due to small conduction band offsets, higher conduction band states of the well are more delocalized into the CdS shell. In conclusion, these measurements provide unique data to understand the electronic structure of colloidal quantum wells and chart a path to atomically precise optoelectronic materials for the mid-infrared.

colloidal atomic layer deposition↗

Study of the confined states in Al{sub x}Ga{sub 1−x}As/GaAs/vacuum surface quantum well

In this paper, we investigate the optical properties of confined electronic states in ultra-thin Al{sub 0.27}Ga{sub 0.73}As/GaAs/vacuum surface quantum wells by using photoreflectance spectroscopy at room temperature. Well-resolved doublet structures were found in the spectra. The energy of the features increases with decreasing well width in agreement with the predictions of a model of the transition energy between confined electron and hole states in a surface quantum well. Both the transition broadening and intensity behaviors are also well explained by the effective mass approximation theory. The offset between the un-perturbed theoretical transition energy and the experimental data has been explained by surface-state interaction effects. Moreover, the fact that the light hole ground state in the surface quantum well can be pushed out from the surface quantum well has been directly observed experimentally.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Anisotropic emission and photon-recycling in strain-balanced quantum well solar cells

Strain-balanced quantum well solar cells (SB-QWSCs) extend the photon absorption edge beyond that of bulk GaAs by incorporation of quantum wells in the i-region of a p–i–n device. Anisotropy arises from a splitting of the valence band due to compressive strain in the quantum wells, suppressing a transition which contributes to emission from the edge of the quantum wells. We have studied both the emission light polarized in the plane perpendicular (TM) to the quantum well which couples exclusively to the light hole transition and the emission polarized in the plane of the quantum wells (TE) which couples mainly to the heavy hole transition. It was found that the spontaneous emission rates TM and TE increase when the quantum wells are deeper. The addition of a distributed Bragg reflector can substantially increase the photocurrent while decreasing the radiative recombination current. We have examined the impact of the photon recycling effect on SB-QWSC performance. We have optimized SB-QWSC design to achieve single junction efficiencies above 30%.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Nonmonotonous electron mobility due to structurally induced resonant coupling of subband states in an asymmetric double quantum well

We show that sharp nonmonotic variation of low temperature electron mobility μ can be achieved in GaAs/Al{sub x}Ga{sub 1-x}As barrier delta-doped double quantum well structure due to quantum mechanical transfer of subband electron wave functions within the wells. We vary the potential profile of the coupled structure as a function of the doping concentration in order to bring the subbands into resonance such that the subband energy levels anticross and the eigen states of the coupled structure equally share both the wells thereby giving rise to a dip in mobility. When the wells are of equal widths, the dip in mobility occurs under symmetric doping of the side barriers. In case of unequal well widths, the resonance can be obtained by suitable asymmetric variation of the doping concentrations. The dip in mobility becomes sharp and also the wavy nature of mobility takes a rectangular shape by increasing the barrier width. We show that the dip in mobility at resonance is governed by the interface roughness scattering through step like changes in the subband mobilities. It is also gratifying to show that the drop in mobility at the onset of occupation of second subband is substantially supressed through the quantum mechanical transfer of subband wave functions between the wells. Our results can be utilized for performance enhancement of coupled quantum well devices.

36 MATERIALS SCIENCE↗

Transport properties of InGaAs/GaAs Heterostructures with {delta}-doped quantum wells

The lateral transport of electrons in single- and double-well pseudomorphic GaAs/n-InGaAs/GaAs heterostructures with quantum wells 50-100 meV deep and impurity {delta}-layers in the wells, with concentrations in the range 10{sup 11} < N{sub s} < 10{sup 12} cm{sup -2}, has been investigated. Single-well structures with a doped well at the center exhibit a nonmonotonic temperature dependence of the Hall coefficient and an increase in low-temperature electron mobility with an increase in the impurity concentration. The results obtained indicate that the impurity-band electron states play an important role in the conductivity of these structures. Involvement of the impurity band also allows to explain adequately the characteristics of the conductivity of double-well structures; in contrast to single-well structures, band bending caused by asymmetric doping is of great importance. The numerical calculations of conductivity within the model under consideration confirm these suggestions.

36 MATERIALS SCIENCE↗

Polaron mass of charge carriers in semiconductor quantum wells

A theory of the interaction of charge carriers with optical phonons in a quantum well is developed with consideration for interface optical phonons. The dependence of the polaron effective mass on the quantum-well dimensions and dielectric characteristics of barriers is analyzed in detail. It is shown that, in narrow quantum wells, a quasi-two-dimensional polaron can be formed. In this case, however, the interaction parameters are defined by the charge-carrier effective mass in the quantum well and by the frequencies of interface optical phonons. If barriers are made of a nonpolar material, the polaron effective mass depends on the quantum-well width. As the quantum-well width is increased, a new mechanism of enhancement of the electron–phonon interaction develops. The mechanism is implemented, if the optical phonon energy is equal to the energy of one of the electronic transitions. This condition yields an unsteady dependence of the polaron effective mass on the quantum-well width.

36 MATERIALS SCIENCE↗

Utah FORGE: Well 16A(78)-32 Drilling Data

This dataset includes survey data, drilling data, daily reports, summaries of daily operations, and rig photos from the drilling of Utah FORGE well 16A(78)-32, which is a highly deviated deep well. It was completed 60 days ahead of schedule. Rig move in began 10/22/2020 and drilling commenced on 10/30/2020, and total depth was reached on 12/18/2020. Drilling was followed by a diagnostic fracture injection test (DFIT), logging, and circulating casing. The rig was released on 1/12/2021. The upper part of the well was drilled vertically through approximately 4,700 feet of sediments before penetrating into high strength, crystalline granite. The well was deviated at a 65 degree angle from vertical after reaching a depth of 6,000 ft. This angle was maintained for the remainder of the well's trajectory. The well ultimately reached a true vertical depth of 8,559 feet, and a total measured depth of 10,987 feet. Preliminary measurements indicate temperatures at the "toe" of the well will exceed 442 degrees F (228 degrees C). Approximately 74 ft of core of the granitic and metamorphic rocks that will form the FORGE reservoir was also recovered.

15 GEOTHERMAL ENERGY↗

A parametric study on the benefits of drilling horizontal and multilateral wells in coalbed methane reservoirs

Recent years have witnessed a renewed interest in development of coalbed methane (CBM) reservoirs. Optimizing CBM production is of interest to many operators. Drilling horizontal and multilateral wells is gaining Popularity in many different coalbed reservoirs, with varying results. This study concentrates on variations of horizontal and multilateral-well configurations and their potential benefits. In this study, horizontal and several multilateral drilling patterns for CBM reservoirs are studied. The reservoir parameters that have been studied include gas content, permeability, and desorption characteristics. Net present value (NPV) has been used as the yard stick for comparing different drilling configurations. Configurations that have been investigated are single-, dual-, tri-, and quad-lateral wells along with fishbone (also known as pinnate) wells. In these configurations, the total length of horizontal wells and the spacing between laterals (SBL) have been studied. It was determined that in the cases that have been studied in this paper (all other circumstances being equal), quadlateral wells are the optimum well configuration.

01 COAL, LIGNITE, AND PEAT↗

2012 Idaho National Laboratory Water Use Report and Comprehensive Well Inventory (Revision 21)

This 2012 Idaho National Laboratory Water Use Report and Comprehensive Well Inventory (Revision 21) provides water use information (monthly annual average and total annual volume) for production and potable water wells at the Idaho National Laboratory for Calendar Year 2012. It also provides detailed information for new, modified, and abandoned (decommissioned) wells and holes. Three new wells were drilled and completed in Calendar Year 2012. Two wells, RWMC-GAS-V-078 and USGS-092 were modified. No wells or holes were decommissioned. Detailed construction information for the new and modified wells is provided. Location maps are included, provided survey information was available.

99 GENERAL AND MISCELLANEOUS↗

2013 Idaho National Laboratory Water Use Report and Comprehensive Well Inventory (Revision 22)

This 2013 Idaho National Laboratory Water Use Report and Comprehensive Well Inventory (Revision 22) provides water use information for production and potable water wells at the Idaho National Laboratory for Calendar Year 2013. It also provides detailed information for new, modified, and decommissioned wells and holes. Two new wells were drilled and completed in Calendar Year 2013. No modifications were performed on any wells. Seven wells were decommissioned in Calendar Year 2013. Detailed construction information for the new and decommissioned wells is provided. Location maps are included, provided survey information was available. This report is being submitted in accordance with the Water Rights Agreement between the State of Idaho and the United States, for the United States Department of Energy (dated 1990) and the subsequent Partial Decree for Water Right 34-10901 issued June 20, 2003.

2013 idaho national laboratory water use report an↗

Characteristics of a Well Clear Definition and Alerting Criteria for Encounters Between UAS and Manned Aircraft in Class E Airspace

Unmanned aircraft systems (UAS) will be required to equip with a detect-and-avoid (DAA) system in order to satisfy the federal aviation regulations to remain well clear of other aircraft. For a DAA system to satisfy the requirement to stay well clear of other airborne traffic, a quantitative definition of well clear needs to be defined and evaluated. This study investigates the implications of UAS using proposed well clear definitions as a separation standard for conducting operations in the National Airspace System (NAS). The first analysis considers three well clear definitions and presents the relative state conditions of intruder aircraft as they encroach upon the well clear boundary. The second analysis focuses on the definition of the alerting criteria needed to inform the UAS operator of a potential loss of well clear. All analyses are conducted in a NAS-wide fast-time simulation environment using UAS aircraft models, proposed UAS missions, and historical air defense radar data to populate the background traffic operating under visual flight rules. The results presented in this study inform the safety case, requirements development, and the operational environment for DAA minimum operational performance standards.

Safety↗

Automated Variance Reduction Applied to Nuclear Well-Logging Problems

The Monte Carlo method enables detailed, explicit geometric, energy and angular representations, and hence is considered to be the most accurate method available for solving complex radiation transport problems. Because of its associated accuracy, the Monte Carlo method is widely used in the petroleum exploration industry to design, benchmark, and simulate nuclear well-logging tools. Nuclear well-logging tools, which contain neutron and/or gamma sources and two or more detectors, are placed in boreholes that contain water (and possibly other fluids) and that are typically surrounded by a formation (e.g., limestone, sandstone, calcites, or a combination). The response of the detectors to radiation returning from the surrounding formation is used to infer information about the material porosity, density, composition, and associated characteristics. Accurate computer simulation is a key aspect of this exploratory technique. However, because this technique involves calculating highly precise responses (at two or more detectors) based on radiation that has interacted with the surrounding formation, the transport simulations are computationally intensive, requiring significant use of variance reduction techniques, parallel computing, or both. Because of the challenging nature of these problems, nuclear well-logging problems have frequently been used to evaluate the effectiveness of variance reduction techniques (e.g., Refs. 1-4). The primary focus of these works has been on improving the computational efficiency associated with calculating the response at the most challenging detector location, which is typically the detector furthest from the source. Although the objective of nuclear well-logging simulations is to calculate the response at multiple detector locations, until recently none of the numerous variance reduction methods/techniques has been well-suited to simultaneous optimization of multiple detector (tally) regions. Therefore, a separate calculation is typically performed for each desired detector response. This paper summarizes recent work to apply and evaluate the effectiveness of deterministic-adjoint-based variance reduction methods, including a recently developed method for simultaneous optimization of multiple detectors, for two simple nuclear well-logging tool problems that have been widely used in the variance reduction literature. The computational effectiveness of the method for simultaneous optimization is also compared to the use of multiple, individually optimized simulations for these simple well-logging problems.

02 PETROLEUM↗

Geologic carbon sequestration injection wells in overpressured storage reservoirs: estimating area of review

The Area of Review (AoR) under the US Environmental Protection Agency's (EPA) Class VI CO 2 injection permit is defined as the region surrounding the geologic carbon sequestration (GCS) project where underground sources of drinking water (USDWs) may be endangered. Estimation of the AoR is based on the calculated reservoir pressurization due to CO 2 injection and the associated potential to lift saline water into potable groundwater aquifers through open flow paths (e.g. wells) assuming the system is hydrostatic. In cases where the storage reservoirs are not initially hydrostatic, and in particular where they are overpressured, AoR estimation methods need to be altered. Here in this paper, we present and apply an approach to evaluating potential endangerment of USDW based on comparing brine leakage through a hypothetical open flow path in a no-injection scenario and brine leakage in a CO 2 -injection scenario. We present six possible ways to normalize injection-related leakage relative to no-injection leakage. We calculate leakage using semi-analytical solutions for single-phase flow and model reservoir pressurization and flow up (single) leaky wells located progressively farther from the injection well. For an example case of relative overpressure and using an injection-rate-based approach, results show 50-60% larger open-well-leakage rates for wells located at 2 km and 10% increase for wells located at 10 km from the injection well relative to the no-injection case. If total brine leakage is considered, the results depend strongly on the assumed pre-injection to post-injection time frames and on the methods of normalization used to calculate incremental leakage.

54 ENVIRONMENTAL SCIENCES↗

Basin-scale analysis of Mokelumne River Formation for multi-well CO 2 injection

Large-scale carbon sequestration will likely require multiple projects injecting CO 2 into the same subsurface formation, raising concerns about safe operation and efficient use of storage capacity. This study evaluates the long-term response of the Mokelumne River Formation in California’s Sacramento Basin to multi-megaton CO 2 injection using three geologic models of the formation and the open-source simulator GEOS. The analysis focuses on three aspects of reservoir performance: (1) average pressure increase and dissolved CO 2 mass after 30 years for varying well counts and injection rates, (2) pressure interference in a multi-well configuration, and (3) dynamic storage capacity with identification of overpressure-prone regions. The results show that average formation pressure increases linearly with injected mass, while CO 2 dissolution exhibits mixed scaling: approximately linear with the number of wells but sublinear with injection rate, indicating that distributing injection across more wells enhances dissolution more effectively than increasing per-well rates. Pressure-interference effects are significant, with lower-permeability conditions delaying their onset but amplifying their magnitude at later times. Dynamic capacity, defined by the first occurrence of pressure exceeding the local overburden-based limit anywhere in the formation, varies across geologic models and assumed overburden pressure gradients. A lower fidelity geologic model predicts nearly twice the storage capacity of the two higher fidelity models, which consistently estimate approximately 1 Gt under the upper-bound overburden pressure gradient considered for the Sacramento Basin. In all model scenarios, overpressure develops away from injection wells, particularly in higher-elevation regions, highlighting the importance of basin-scale modelling for identifying risks beyond the immediate well vicinity.

Basin-scale↗

Tunneling dynamics and phase transition of a Bose-Fermi mixture in a double well

The coherent nonlinear tunneling dynamics of a boson-fermion mixture in a double-well potential is studied in this paper. Four types of phase are found for the mixture. The first one is two species localizing in different potential wells. The second one is two species coexisting in the same well. The third one is two species equally populated in two wells. The fourth one is one species equally populated in two wells while the other species is in one well. The phase transitions among these four states have been investigated. The interspecies and intraspecies interactions as well as bosonic and fermionic numbers can dramatically affect these phase transitions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Localization landscape theory of disorder in semiconductors. II. Urbach tails of disordered quantum well layers

Urbach tails in semiconductors are often associated to effects of compositional disorder. The Urbach tail observed in InGaN alloy quantum wells of solar cells and LEDs by biased photocurrent spectroscopy is shown to be characteristic of the ternary alloy disorder. The broadening of the absorption edge observed for quantum wells emitting from violet to green (indium content ranging from 0% to 28%) corresponds to a typical Urbach energy of 20 meV. A three-dimensional absorption model is developed based on a recent theory of disorder-induced localization which provides the effective potential seen by the localized carriers without having to resort to the solution of the Schrödinger equation in a disordered potential. This model incorporating compositional disorder accounts well for the experimental broadening of the Urbach tail of the absorption edge. For energies below the Urbach tail of the InGaN quantum wells, type-II well-to-barrier transitions are observed and modeled. This contribution to the below-band-gap absorption is particularly efficient in near-ultraviolet emitting quantum wells.When reverse biasing the device, the well-to-barrier below-band-gap absorption exhibits a red-shift, while the Urbach tail corresponding to the absorption within the quantum wells is blue-shifted, due to the partial compensation of the internal piezoelectric fields by the external bias. The good agreement between the measured Urbach tail and its modeling by the localization theory thus demonstrates the applicability of the latter to compositional disorder effects in nitride semiconductors.

14 SOLAR ENERGY↗

SU-F-BRA-08: An Investigation of Well-Chamber Responses for An Electronic Brachytherapy Source

Purpose: The aim of this study was to investigate the variation of well-type ionization chamber response between a Xoft Axxent™ electronic brachytherapy (EBT) source and a GE Oncoseed™ 6711 I-125 seed. Methods: A new EBT air-kerma standard has recently been introduced by the National Institute of Standards and Technology (NIST). Historically, the Axxent source strength has been based on a well chamber calibration from an I-125 brachytherapy source due to the lack of a primary standard. Xoft utilizes a calibration procedure that employs a GE 6711 seed calibration as a surrogate standard to represent the air-kerma strength of an Axxent source. This method is based on the premise that the energies of the two sources are similar and thus, a conversion factor would be a suitable interim solution until a NIST standard was established. For this investigation, a number of well chambers of the same model type and three different EBT sources were used to determine NIST-traceable calibration coefficients for both the GE 6711 seed and the Axxent source. The ratio of the two coefficients was analyzed for consistency and also to identify any possible correlations with chamber vintage or the sources themselves. Results: For all well chambers studied, the relative standard deviation of the ratio of calibration coefficients between the two standards is less than 1%. No specific trends were found with the well chamber vintage or between the three different EBT sources used. Conclusion: The variation of well chamber calibration coefficients between a Xoft Axxent™ EBT source versus a GE 6711 Oncoseed™ are consistent across well chamber vintage and between sources. The results of this investigation confirm the underlying assumptions and stability of the surrogate standard currently in use by Xoft, and establishes a migration path for future implementation of the new NIST air kerma standard. This research is supported in part by Xoft, a subsidiary of iCAD.

61 RADIATION PROTECTION AND DOSIMETRY↗