Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “water elevation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

Significant stream chemistry response to temperature variations in a high-elevation mountain watershed

Abstract High-elevation mountain regions, central to global freshwater supply, are experiencing more rapid warming than low-elevation locations. High-elevation streams are therefore potentially critical indicators for earth system and water chemistry response to warming. Here we present concerted hydroclimatic and biogeochemical data from Coal Creek, Colorado in the central Rocky Mountains at elevations of 2700 to 3700 m, where air temperatures have increased by about 2 °C since 1980. We analyzed water chemistry every other day from 2016 to 2019. Water chemistry data indicate distinct responses of different solutes to inter-annual hydroclimatic variations. Specifically, the concentrations of solutes from rock weathering are stable inter-annually. Solutes that are active in soils, including dissolved organic carbon, vary dramatically, with double to triple peak concentrations occurring during snowmelt and in warm years. We advocate for consistent and persistent monitoring of high elevation streams to record early glimpse of earth surface response to warming.

54 ENVIRONMENTAL SCIENCES↗

Effect of sun elevation upon remote sensing of ocean color over an acid waste dump site

Photographic flights were made over an ocean acid waste dump site while dumping was in progress. The flights resulted in wide angle, broadband, spectral radiance film exposure data between the wavelengths of 500 to 900 nanometers for sun elevation angles ranging from 26 to 42 degrees. It is shown from densitometer data that the spectral signature of acid waste discharged into ocean water can be observed photographically, the influence of sun elevation upon remotely sensed apparent color can be normalized by using a single spectral band ratioing technique, and photographic quantification and mapping of acid waste through its suspended iron precipitate appears possible.

Bressette, W. E.↗

Effect of current on spectrum of breaking waves in water of finite depth

This paper presents an approximate method to compute the mean value, the mean square value and the spectrum of waves in water of finite depth taking into account the effect of wave breaking with or without the presence of current. It is assumed that there exists a linear and Gaussian ideal wave train whose spectrum is first obtained using the wave energy flux balance equation without considering wave breaking. The Miche wave breaking criterion for waves in finite water depth is used to limit the wave elevation and establish an expression for the breaking wave elevation in terms of the elevation and its second time derivative of the ideal waves. Simple expressions for the mean value, the mean square value and the spectrum are obtained. These results are applied to the case in which a deep water unidirectional wave train, propagating normally towards a straight shoreline over gently varying sea bottom of parallel and straight contours, encounters an adverse steady current whose velocity is assumed to be uniformly distributed with depth. Numerical results are obtained and presented in graphical form.

Tung, C. C.↗

Electrocoagulation Combined with Ultrafiltration Membranes as Pretreatment for RO Desalination of Synthetic Cooling Tower Blowdown Water

Electrocoagulation (EC), an electrochemical water treatment process, is commonly used to remove particulate and colloidal matter from water. Here, in this study, we demonstrate that EC, when coupled with membrane filtration, is also capable of removing dissolved species, such as Ca + , Mg 2+ , and SiO x . The removal of such species is important for downstream membrane-based desalination treatment of the water that can suffer from reduced performance due to membrane scaling. Here, we describe how EC can be combined with a low-pressure membrane (LPM) system to offer efficient (and potentially universal) pretreatment for downstream membrane desalination. Synthetic water, simulating cooling tower blowdown (CTBD) with elevated concentrations of hardness and silicates (Ca: 418 ppm, Mg: 63 ppm, SiO 2 : 50 ppm) is treated using EC coupled to ultrafiltration (UF) to remove Mg up to 30 ± 1%, Ca up to 29 ± 1%, and silica up to 99 ± 1%. We evaluated the effectiveness of the EC-UF pretreatment system in reducing downstream RO scaling using thermodynamic modeling to predict the saturation index (SI) at the RO membrane/water interface. An SI value below zero (SI < 0) indicates under-saturated conditions (with respect to a particular mineral) where mineral scaling does not take place, which correlates with improved water recovery. Our findings suggest that the EC-UF pretreatment system was able to increase water recovery by up to 30%, compared to 0% recovery without pretreatment, under optimal conditions (feed solution pH of 7 and an EC charge loading of 1800 C/L). Finally, we conducted an economic analysis showing that implementing an EC-UF system for CTBD water could yield a cost benefit of up to $\$$14.13 per m 3 compared to direct brine disposal.

cooling tower blowdown↗

Data, scripts, and figures associated with a manuscript studying impact of climate and topography on post-fire vegetation recovery.

This data package is associated with the publication “Impact of Topography and Climate on Post-fire Vegetation Recovery Across Different Burn Severity and Land Cover Types through Machine Learning” submitted to Remote Sensing of Environment (Zahura et al. 2023). In this research, a machine learning algorithm, random forest (RF), was utilized to examine the impact of climate and topography on post-fire vegetation recovery. We used enhanced vegetation index (EVI) to examine varying burn severity and land cover types. The data package includes the input files for RF model training, outputs from model predictions and analysis, and python scripts to run the model, analyze the results to understand model performance and interpretability, and plot manuscript figures. This data package contains three folders (Data, Scripts, and Figures), a file-level metadata (FLMD) csv, and a data dictionary (dd) csv. Please see Postfire_recovery_flmd.csv for a list of all files contained in this data package and descriptions for each. The data dictionary (Postfire_recovery_dd.csv) describes the csv column headers. The “Data” folder provides all the inputs and outputs to train the RF model, evaluate performance, and interpret predictions. The “Scripts” folder contains python scripts and jupyter notebooks for model training and result analysis. The “Figures” folder includes the figures used in the manuscript in “.png” and “.jpg” format.

54 ENVIRONMENTAL SCIENCES↗

Consolidation and Permeability of the B1 and D1 Gas Hydrate Bearing Sands and Associated Seal Sediments of the Extended-Duration Gas Production Test Site on the Alaska North Slope

Gas hydrate, a solid combination of gas (mostly methane in nature) and water molecules stable at low temperatures and elevated pressures, occurs naturally in marine and permafrost-associated environments. Gas hydrate reservoirs, such as those in the Alaska North Slope, have been considered potential energy resources for gas production. To understand the petrophysical and geo-mechanical characteristics of the reservoir, core samples retrieved from the site of the JOGMEC-DOE-USGS collaborative gas hydrate R&D project have been analyzed in the laboratory for their hydraulic and mechanical properties. This paper focuses on both seal and reservoir samples associated with the B1 and D1 sands, which are evaluated for index properties (including porosity, grain size distribution, liquid and plastic limits, specific surface area, and specific gravity), consolidation, permeability, and water retention. Furthermore, the reservoir core samples were tested with pore-filling, laboratory-grown tetrahydrofuran hydrate, in order to assess reservoir behavior during gas production from hydrates. Under simulated in situ stress conditions, the seal and hydrate-free reservoir cores had a permeability anisotropy ratio of k h /k v = 3.0−5.0, and k h /k v = 2.4−3.0 for the reservoir tetrahydrofuran hydrate-bearing cores. The data suggest that depressurizing the reservoir to induce hydrate dissociation alters the reservoir effective permeability in three ways: permeabilities decrease due to porosity lost (e.g., the initial reservoir thickness can decrease by up to 5% upon 7 MPa depressurization), permeability increases due to the loss of solid hydrate in the pore space, and permeability anisotropy k h /k v decreases in response to the evolving pore-space geometry. We show that given the simulated in situ gas hydrate saturations (i.e., S h = 32% in core 7P-2E and S h = 21% in core 20P-4), gas production from the dissociation of tetrahydrofuran hydrate in the two tested cores results in a net increase in effective permeability and a decrease in k h /k v . This study highlights the importance of investigating seal and reservoir sediments and the impacts of depressurization on the porosity and permeability responses during production.

Geological materials↗

Abiotic influences on continuous conifer forest structure across a subalpine watershed

Understanding the abiotic drivers of high-elevation forest physiognomy is essential for forecasting how mountain ecosystems will respond to emerging environmental pressures. Most prior studies of these relationships have relied on small samples of the full landscape, resulting in limited power to detect dominant covariates and their interactions. Here we report the first evaluation of abiotic influences on a complement of accurate, wall-to-wall estimates of conifer forest structure and composition at the watershed scale. In a subalpine conifer domain in the Colorado Rocky Mountains (USA), we developed a novel method for deriving stand structure metrics from waveform LiDAR data, which showed high fidelity with field inventory. We quantified the relationships between structural and compositional metrics and climate, topographic, edaphic, and geologic factors. Our results showed that peak snow water equivalent (SWE), snow disappearance rate, and elevation explained most of the variation in forest structure. The highest stand density, basal area, maximum canopy height, and quadratic mean diameter occurred in sites with SWE around one standard deviation below mean, but with long snow residence times. Stand density decreased linearly with elevation, while other metrics peaked between 3000 m and 3200 m. Substrate properties had weaker influence. Continuous mapping of through-canopy forest structure enabled our novel findings of the dominant role of snowpack in explaining structural and compositional variation, and of elevation thresholds. Our reproducible approach facilitates assessment of forest-topoclimate relationships in other conifer-dominated landscapes and improves understanding of the baseline patterns controlling forest structure, which is needed for predicting long-term ecological change.

forest ecology↗

Land surface dynamics and meteorological forcings modulate land surface temperature characteristics

This study examines the effect of land cover, vegetation health, climatic forcings, elevation heat loads, and terrain characteristics (LVCET) on land surface temperature (LST) distribution over West Africa (WA). We employ fourteen machine-learning models, which preserve nonlinear relationships, to downscale LST and other predictands while preserving the geographical variability of WA. Our results showed that the random forest model performs best in downscaling predictands. This is important for the sub-region since it has limited access to mainframes to power multiplex machine-learning algorithms. In contrast to the northern regions, the southern regions consistently exhibit healthy vegetation. Also, areas with unhealthy vegetation coincide with hot LST clusters. The positive Normalized Difference Vegetation Index (NDVI) trends in the Sahel underscore rainfall recovery and subsequent Sahelian greening. The southwesterly winds cause the upwelling of cold waters, lowering LST in southern WA and highlighting the cooling influence of water bodies on LST. Identifying regions with elevated LST is paramount for prioritizing greening initiatives, and our study underscores the importance of considering LVCET factors in urban planning. Topographic slope-facing angles, heat loads, and diurnal anisotropic heat all contribute to variations in LST, emphasizing the need for a holistic approach when designing resilient and sustainable landscapes.

54 ENVIRONMENTAL SCIENCES↗

Mineralogy, Petrology, and Oxygen-isotope Compositions of Magnetite ± Fayalite Assemblages in CO3, CV3, and LL3 Chondrites

We report on the mineralogy, petrology, and O-isotope compositions of magnetite and fayalite (Fa90−100) from several metasomatically altered and weakly metamorphosed carbonaceous (Y-81020 [CO3.05], EET 90043 [CO3.1], MAC 88107 [CO3.1-like], and Kaba [oxidized Bali-like CV3.1]) and unequilibrated ordinary chondrites (UOCs; Semarkona [LL3.00], MET 00452 [LL3.05], MET 96503 [LL3.05], EET 910161 [LL3.05], Ngawi [LL3.0−3.6 breccia], and Vicencia [LL3.2]). In MAC 88107, EET 90043, and Kaba, nearly pure fayalite (Fa98−100) associates with phyllosilicates, magnetite, Fe, Ni-sulfides, and hedenbergite (Fs~50Wo~50), and occurs in all chondritic components—chondrules, matrices,and refractory inclusions. In UOCs, nearly pure fayalite (Fa95−98) associates withphyllosilicates and magnetite, and occurs mainly in matrices and fine-grained chondrulerims. Oxygen-isotope compositions of fayalite and magnetite in UOCs, COs, CVs, and MAC 88107 are in disequilibrium with those of chondrule olivine and low-Ca pyroxene phenocrysts, and plot along mass-dependent fractionation lines with slope of~0.5, butdifferent 17O (~+4.3 1.4‰,−0.2 0.6‰,−1.5 1‰, and−1.8 0.8‰, respectively). Based on the mineralogical observations, thermodynamic analysis, O-isotope compositions, and recently reported experimental data, we infer that (1) fayalite and magnetite in COs,CVs, MAC 88107, and UOCs resulted from aqueous fluid–rock interaction on the chondrite parent asteroids that occurred at low local water-to-rock mass ratios (0.1−0.4) and elevated temperatures (~100−300°C), and (2) 17O of fayalite and magnetite reflects O-isotope compositions of aqueous fluids on the host meteorite parent bodies. The observed differences in 17O of fayalite–magnetite assemblages in UOCs, CVs, COs, and MAC 88107suggest that water ices that accreted into the ordinary chondrite and carbonaceous chondrite parent asteroids had different 17O, implying spatial and/or temporal variations in O-isotope compositions of water in the protoplanetary disk.

Alexander N Krot↗

Hot Water, Cold Reality: Experimental Analysis of Sorption Constraints in Iodine Filtration Media Under Heated-Water Conditions

Iodine has been widely employed as a residual biocide in potable water applications during crewed missions. Unlike other biocides, it is essential to remove iodine from drinking water prior to consumption, as its biocidal concentration raises health concerns. Consequently, effectively removing iodine species from water is a critical step in potable water processing. Although the non-biocided heated leg has not violated microbial specifications on the International Space Station, any wetted volume lacking biocide presents potential risks for long‑duration exploration missions and for systems that are sensitive to microbial growth/contamination. Recent assessments indicate, however, that iodine‑removal performance may degrade under elevated temperature conditions, such as those required for dispensing hot water for food preparation. This reduction in efficacy appears to stem from both the potential physical degradation of filtration media and the temperature‑dependent behavior of adsorption processes. To investigate the influence of water temperature on the efficacy of filtration media for iodine removal, a series of adsorption capacity tests were conducted at both room temperature and elevated temperatures (90 °C). These experiments aimed to benchmark the performance of the adsorbents that constitute the ACTEX filter in the ISS’s potable water dispenser. The findings of this study provide critical insights into the iodine filtration process, verify the potential performance shortfall under elevated temperature conditions, and establish the basis for defining new absorbent requirements to ensure reliable iodine removal in future mission architectures.

drinking water↗

Hot Water, Cold Reality: Experimental Analysis of Sorption Constraints in Iodine Filtration Media Under Heated-Water Conditions

Iodine has been widely employed as a residual biocide in potable water applications during crewed missions. Unlike other biocides, it is essential to remove iodine from drinking water prior to consumption, as its biocidal concentration raises health concerns. Consequently, effectively removing iodine species from water is a critical step in potable water processing. Although the non-biocided heated leg has not violated microbial specifications on the International Space Station, any wetted volume lacking biocide presents potential risks for long‑duration exploration missions and for systems that are sensitive to microbial growth/contamination. Recent assessments indicate, however, that iodine‑removal performance may degrade under elevated temperature conditions, such as those required for dispensing hot water for food preparation. This reduction in efficacy appears to stem from both the potential physical degradation of filtration media and the temperature‑dependent behavior of adsorption processes. To investigate the influence of water temperature on the efficacy of filtration media for iodine removal, a series of adsorption capacity tests were conducted at both room temperature and elevated temperatures (90 °C). These experiments aimed to benchmark the performance of the adsorbents that constitute the ACTEX filter in the ISS’s potable water dispenser. The findings of this study provide critical insights into the iodine filtration process, verify the potential performance shortfall under elevated temperature conditions, and establish the basis for defining new absorbent requirements to ensure reliable iodine removal in future mission architectures.

iodine↗

A non-Gaussian statistical model for surface elevation of nonlinear random wave fields

Probability density function of the surface elevation of a nonlinear random wave field is obtained. The wave model is based on the Stokes expansion carried to the third order for both deep water waves and waves in finite depth. The amplitude and phase of the first-order component of the Stokes wave are assumed to be Rayleigh and uniformly distributed and slowly varying, respectively. The probability density function for the deep water case was found to depend on two parameters: the root-mean-square surface elevation and the significant slope. For water of finite depth, an additional parameter, the nondimensional depth, is also required. An important difference between the present result and the Gram-Charlier representation is that the present probability density functions are always nonnegative. It is also found that the 'constant' term in the Stokes expansion, usually neglected in deterministic studies, plays an important role in determining the details of the density function. The results compare well with laboratory and field experiment data.

Huang, N. E.↗

Shipboard and Satellite Views of Elevated Tropospheric Ozone over the Tropical Atlantic in January-February 1999

During the Aerosols99 trans-Atlantic cruise from Norfolk, VA, to Cape Town, South Africa, daily ozonesondes were launched from the NOAA R/V Ronald H Brown between 17 January and 6 February l999. A composite of tropospheric ozone profiles along the latitudinal transect shows 4 zones, which are interpreted using correlative shipboard ozone, CO, water vapor, and overhead aerosol optical thickness measurements. Elevated ozone associated with biomass burning north of the ITCZ (Intertropical Convergence Zone) is prominent at 3-5 km from 10-0N, but even higher ozone (100 ppbv, 7-10 km) occurred south of the ITCZ, where it was not burning. Column-integrated tropospheric ozone was 44 Dobson Units (DU) in one sounding, 10 DU lower than the maximum in a January-February 1993 Atlantic cruise with ozonesondes [Weller et al., 1996]. TOMS tropospheric ozone shows elevated ozone extending throughout the tropical Atlantic in January 1999. Several explanations are considered. Back trajectories, satellite aerosol observations and shipboard tracers suggest a combination of convection and interhemispheric transport of ozone and/or ozone precursors, probably amplified by a lightning NO source over Africa.

Thompson, Anne M.↗

Kilometer-Scale Hydrologic Exchange Flows in a Gravel Bed River Corridor and Their Implications to Solute Migration

In this work, a well-characterized field site along a major river corridor was used to investigate the dynamic pathways and impacts of subsurface hydrogeologic structures on kilometer-scale hydrologic exchange flows between river water and groundwater. A aqueous uranium (U aq ) plume exists at the site that discharges to the Columbia River. We performed temporally intensive monitoring of specific conductance (SpC) and U aq concentrations within the plume at increasing distances from the river shoreline and at locations both within and outside a presumed subsurface pathway of lateral hydrologic exchange. Specific conductance and U aq were utilized as in-situ tracers of hydrologic exchange and associated groundwater-surface water mixing. Monitoring data was collected for an approximate two year period during which seasonal river elevations varied by more than 2 m causing distinct events of river water intrusion and retreat from the near-shore aquifer, and large temporal variations in well-water analyte concentrations. Statistical clustering analysis was applied to identify well groupings exhibiting common time series behaviors. PFLOTRAN was implemented within a modeling domain of 3.3 x 1.9 km with dynamic flow boundary conditions and accurate subsurface topography for the basal aquitard underlying the aquifer. In-silico calculations of river water tracer behavior were performed to assess predominant flow directions and velocities influenced by river stage variations and variable aquitard topography, and their collective influences on SpC and U aq concentrations. We demonstrate complicated multidirectional flow behaviors at the kilometer scale resulting from hydrologic exchange and subsurface structure that influence plume dynamics and determine the overall system behavior.

54 ENVIRONMENTAL SCIENCES↗

Simulation of Acoustics for Ares I Scale Model Acoustic Tests

The Ares I Scale Model Acoustics Test (ASMAT) is a series of live-fire tests of scaled rocket motors meant to simulate the conditions of the Ares I launch configuration. These tests have provided a well documented set of high fidelity acoustic measurements useful for validation including data taken over a range of test conditions and containing phenomena like Ignition Over-Pressure and water suppression of acoustics. To take advantage of this data, a digital representation of the ASMAT test setup has been constructed and test firings of the motor have been simulated using the Loci/CHEM computational fluid dynamics software. Results from ASMAT simulations with the rocket in both held down and elevated configurations, as well as with and without water suppression have been compared to acoustic data collected from similar live-fire tests. Results of acoustic comparisons have shown good correlation with the amplitude and temporal shape of pressure features and reasonable spectral accuracy up to approximately 1000 Hz. Major plume and acoustic features have been well captured including the plume shock structure, the igniter pulse transient, and the ignition overpressure.

Putnam, Gabriel↗

Greater vulnerability of snowmelt-fed river thermal regimes to a warming climate

While the advective flux from cool melt runoff can be a significant source of thermal energy to mountainous rivers, it has been a much less addressed process in river temperature modeling and thus our understanding is limited with respect to the spatiotemporal effect of melt on river temperatures at the watershed scale. In particular, the extent and magnitude of the melt cooling effect in the context of a warming climate are not yet well understood. To address this knowledge gap, we improved a coupled hydrology and stream temperature modeling system, Distributed Hydrology Soil Vegetation Model and River Basin Model (DHSVM-RBM), to account for the thermal effect of cool snowmelt runoff on river temperatures. The model was applied to a snow-fed river basin in the Pacific Northwest to evaluate the responses of snow, hydrology, stream temperatures, and potential fish growth to future climates. Historical simulations suggest that snowmelt can notably reduce the basin-wide peak summer temperatures particularly at high-elevation tributaries, while the thermal impacts of melt water can persist through the summer along the mainstem. Ensemble climate projections suggested that a warming climate will decrease basin mean peak snow and summer streamflow by 92% and 60% by the end of the century. Due to the compounded influences of warmer temperatures, lower flows and diminished cooling from melt, rivers reaches in high elevation snow-dominated areas were projected to be most vulnerable to future climate change, showing the largest increases in summer peak temperatures. As a result, thermal habitat used by anadromous Pacific salmon was projected to exhibit substantially lower growth potential during summer in future. These results have demonstrated the necessity of accounting for snowmelt influence on stream temperature modeling in mountainous watersheds.

54 ENVIRONMENTAL SCIENCES↗

How do drought and heat affect the response of soybean seed yield to elevated O 3 ? An analysis of 15 seasons of free–air O 3 concentration enrichment studies

The coincidence of rising ozone concentrations ([O 3 ]), increasing global temperatures, and drought episodes is expected to become more intense and frequent in the future. A better understanding of the responses of crop yield to elevated [O 3 ] under different levels of drought and high temperature stress is, therefore, critical for projecting future food production potential. Using a 15-year open-air field experiment in central Illinois, we assessed the impacts of elevated [O 3 ] coupled with variation in growing season temperature and water availability on soybean seed yield. Thirteen soybean cultivars were exposed to a wide range of season-long elevated [O 3 ] in the field using free-air O 3 concentration enrichment. Elevated [O3] treatments reduced soybean seed yield from as little as 5.3% in 2005 to 35.2% in 2010. Although cultivars differed in yield response to elevated [O 3 ] (R), ranging from 17.5% to –76.4%, there was a significant negative correlation between R and O 3 dosage. Soybean cultivars showed greater seed yield losses to elevated [O 3 ] when grown at drier or hotter conditions compared to wetter or cooler years, because the hotter and drier conditions were associated with greater O 3 treatment. However, year-to-year variation in weather conditions did not influence the sensitivity of soybean seed yield to a given increase in [O 3 ]. Collectively, this study quantitatively demonstrates that, although drought conditions or warmer temperatures led to greater O 3 treatment concentrations and O 3 -induced seed yield reduction, drought and temperature stress did not alter soybean's sensitivity to O 3 . Our results have important implications for modeling the effects of rising O 3 pollution on crops and suggest that altering irrigation practices to mitigate O 3 stress may not be effective in reducing crop sensitivity to O 3 .

60 APPLIED LIFE SCIENCES↗

Martian atmospheric water vapor observations - 1972-74 apparition

Results are reported for 469 photoelectric spectral scans of the Doppler-shifted Martian water lines (at 8197.704 and 8176.975 A), which were obtained during the 1972-74 apparition with an echelle-coude scanner mounted on a 107-in. telescope. These observations covered almost an entire Martian year and were made in three ways: pole to pole on the central meridian, parallel to the equator at various latitudes, and parallel to the terminator at various positions between the limb and the terminator. Previous observations of Martian water vapor are reviewed, and the data-reduction procedures used in the present study are described in detail. The major conclusions are: (1) both seasonal and diurnal variations seem to be controlled by insolation rather than by local topography relative to the 6.1-mb surface; (2) there was a slight negative correlation with elevation, but this improved during seasons of greater water content; (3) the planetwide abundance is low during both equinoctical periods; (4) the maximum abundance occurs at about 40 deg latitude in each hemisphere after solstice; and (5) during the 'drier' seasons near the equinoxes, the atmospheric water vapor content changes by a factor of 2 to 3 over a diurnal cycle with the maximum near local noon.

Barker, E. S.↗