Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “vehicle controller”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
NASA NTRS2016

Experimental Evaluation of the Scale Model Method to Simulate Lunar Vehicle Dynamics

As compared to driving on Earth, the presence of lower gravity and uneven terrain on planetary bodies makes high speed driving difficult. In order to maintain ground contact and control vehicles need to be designed with special attention to dynamic response. The challenge of maintaining control on the Moon was evident during high speed operations of the Lunar Roving Vehicle (LRV) on Apollo 16, as at one point all four tires were off the ground; this event has been referred to as the Lunar Grand Prix. Ultimately, computer simulation should be used to examine these phenomena during the vehicle design process; however, experimental techniques are required for the validation and elucidation of key issues. The objectives of this study were to evaluate the methodology for developing a scale model of a lunar vehicle using similitude relationships and to test how vehicle configuration, six or eight wheel pods, and local tire compliance, soft or stiff, affect the vehicles dynamic performance. A wheel pod consists of a drive and steering transmission and wheel. The Lunar Electric Rover (LER), a human driven vehicle with a pressurized cabin, was selected as an example for which a scale model was built. The scaled vehicle was driven over an obstacle and the dynamic response was observed and then scaled to represent the full-size vehicle in lunar gravity. Loss of ground contact, in terms of vehicle travel distance with tires off the ground, was examined. As expected, local tire compliance allowed ground contact to be maintained over a greater distance. However, switching from a six-tire configuration to an eight-tire configuration with reduced suspension stiffness had a negative effect on ground contact. It is hypothesized that this was due to the increased number or frequency of impacts. The development and testing of this scale model provided practical lessons for future low-gravity vehicle development.

Moon↗
NASA NTRS1993

Manual control in space research on perceptual-motor functions under zero gravity conditions (L-10)

Are human abilities to control vehicles and other machines the same in space as those on Earth? The L-10 Manual Control Experiment of the First Materials Processing Tests (FMPT) started from this question. Suppose a pilot has the task to align the head of a space vehicle toward a target. His actions are to look at the target, to determine the vehicle movement, and to operate the manipulator. If the activity of the nervous system were the same as on Earth, the movements, of the eye and hand would become excessive because the muscles do not have to oppose gravity. The timing and amount of movement must be arranged for appropriate actions. The sensation of motion would also be affected by the loss of gravity because the mechanism of the otolith, the major acceleration sensor, depends on gravity. The possible instability of the sensation of direction may cause mistakes in the direction of control of manipulator movement. Thus, the experimental data can be used for designing man-machine systems in space, as well as for investigation of physiological mechanisms. In this experiment, the direction of vehicle heading is expressed by a light spot on an array of light emitting diodes and the manipulator is of a finger stick type. As the light spot moves up and down, the Japanese Payload Specialist, and the subject, must move the manipulator forward and backward to keep the movement of the light spot within the neighborhood of the central point of the display. The position of the light spot is computed in such a manner that when the stick is kept at the neutral position, a motion whose acceleration is proportional to the angle of deflection is added to the movement of the light spot. The Operator Describing Function, which is an expression of human control characteristics, can be calculated from 2 minutes of raw data of the light spot position and stick deflection. The 2 minutes of operation is called a run, and 8 runs with resting periods composes a session. The on-orbit experiment will be conducted on the second, fourth, and seventh days. One session of experiment of each of these days is conducted following the L-4 experiment, which uses the same apparatus. The Payload Specialist, aided by a Mission Specialist, will take our apparatus from a rack container, set up the apparatus, attach electrodes for measurements of eye movement and muscle activity, conduct the L-4 Visual Stability Experiment, conduct one session of the manual control experiment, and then dissemble and stow the apparatus. In addition to the flight experiment, pre-flight and post-flight experiments will be conducted. The data of three sessions on orbit will reflect adaption of physiological systems to microgravity. The data of post-flight experiments, on the other hand, will reflect re-adaptation of physiological systems to the gravity condition on the ground. Control data collected with and without psychological tension will be scheduled just prior to and long before launch.

Tada, Akira↗
NASA NTRS1971

Integrated operations/payloads/fleet analysis. Volume 3: System costs. Appendix A: Program direct costs

Individualized program direct costs for each satellite program are presented. This breakdown provides the activity level dependent costs for each satellite program. The activity level dependent costs, or, more simply, program direct costs, are comprised of the total payload costs (as these costs are strictly program dependent) and the direct launch vehicle costs. Only those incremental launch vehicle costs associated directly with the satellite program are considered. For expendable launch vehicles the direct costs include the vehicle investment hardware costs and the launch operations costs. For the reusable STS vehicles the direct costs include only the launch operations, recovery operations, command and control, vehicle maintenance, and propellant support. The costs associated with amortization of reusable vehicle investment, RDT&E range support, etc., are not included.

Source record↗
NASA NTRS1992

Dynamics and control of hypersonic aeropropulsive/aeroelastic vehicles

The guidance and control of hypersonic vehicles is examined by studying the airframe/engine/structural-dynamic interactions of a generic vehicle with scramjet propulsion. The pitch-attitude dynamics are described for the vehicle configuration that can sustain hypersonic flight at near-orbital altitudes. These aerospacecraft have strong airframe/engine/elastic coupling in attitude dynamics and engine responses with static instability with respect to pitch. An integrated airframe-engine control system is presented for the control of the system's strong aeropropulsive/aeroelastic coupling. The control methodology utilizes feedback of measured/synthesized values of angle of attack, blended pitch rate, thrust, and combustor-inlet pressure. The multiinput/multioutput engine controller requires high-bandwidth actuation of the fuel-flow control and the effective diffuser ratio. The proposed control laws do not provide optimized performance in terms of pitch response suggesting that additional control crossfeeds and filtering is needed.

Schmidt, David K.↗
NASA NTRS1979

Active flutter control for flexible vehicles, volume 1

An active flutter control methodology based on linear quadratic gaussian theory and its application to the control of a super critical wing is presented. Results of control surface and sensor position optimization are discussed. Both frequency response matching and residualization used to obtain practical flutter controllers are examined. The development of algorithms and computer programs for flutter modeling and active control design procedures is reported.

Mahesh, J. K.↗
NASA NTRS1984

Flight characteristics of a manned, low-speed, controlled deep stall vehicle

A successful manned, low speed, controlled deep stall flight research program was conducted at NASA Ames Research Center's Dryden Flight Research Facility. Piloting techniques were established that enabled the pilot to attain and stabilize on an angle of attack in the 30 deg to 72 deg range. A flight determined aerodynamic data base was established for angles of attack as high as 72 deg. Poor lateral directional flying qualities were encountered at angles of attack above 60 deg. Insight into the high angle of attack lateral directional dynamics was gained through a basic root locus analysis.

Sim, A. G.↗
DOE OSTI2023

Adaptive Path-Following Control for Ground Vehicles Using a Switching Non-Quadratic Lyapunov Function

The application of adaptive control techniques in the development of control systems for intelligent vehicles, especially for ground vehicle path-following controllers, has gained popularity due to their ability to handle large-scale parametric uncertainties. However, the use of a standard quadratic Lyapunov function in existing adaptive control-based path-following controllers can lead to poor transient performance, such as slow convergence and/or large overshoot. To address this limitation, this study proposes the use of a switching non-quadratic Lyapunov function to design a model reference adaptive path-following controller that aims to provide superior transient performance. The stability and signal convergence of the closed-loop system are demonstrated through a Lyapunov-like analysis. Through dSPACE ASM simulation, the effectiveness of the proposed controller is illustrated, which confirms improved tracking performance over a baseline solution.

Zhou, Xingyu↗
NASA NTRS1973

Adaptive systems research in the NASA

The past contributions of NASA to adaptive control technology are reviewed. The review places emphasis on aircraft applications although spacecraft and launch vehicle control applications are included. Particular emphasis is given to the adaptive control system used in the X-15 research aircraft. Problem areas that limited the realizable performance of this adaptive system are discussed. Current technological capabilities are used to extrapolate the present-day potential for adaptive flight control. Specifically, the potential created by use of the modern high-speed digital computer in flight control is discussed. Present plans for research in digital adaptive control systems for the NASA F8-C digital fly-by-wire program are presented. These plans are currently envisioned to include research in at least two types of adaptive controls, the system identification/on-line design type, and the model reference type.

Montgomery, R.↗
NASA NTRS2008

FIDO-Class Development Rover

A report describes a rover-type robotic wheeled vehicle recently built for use as a testbed for development of software for future rover-type vehicles. This vehicle is a derivative of the Field Integrated Design and Operations (FIDO) rover, which is a prototype Mars-exploration rover that also serves as a terrestrial testbed. The present vehicle was designed to be nearly functionally identical to the FIDO rover but to be built at much lower cost and to incorporate several improvements to increase utility for development work. Accordingly, considerable effort was made to use commercial off-the-shelf parts and other parts that could be fabricated easily and at low cost. Important features of this vehicle include six-wheel drive and six-wheel steering; onboard computer and power, control, and data-communication electronics having flexibility needed for development of software; significantly increased maximum speed (60 cm/s versus 6 cm/s for the FIDO rover); a rocker-bogey suspension with external differential link, functionally equivalent to that of the FIDO rover; and a hand-held remote controller that can be used to control vehicle motion manually without using the computer (or while waiting for the onboard computer to boot up).

Herman, Herman↗
NASA NTRS2007

Modeling and Parameter Estimation of Spacecraft Fuel Slosh with Diaphragms Using Pendulum Analogs

Prediction and control of liquid slosh in moving containers is an important consideration in the design of spacecraft and launch vehicle control systems. Even with modern computing systems, CFD type simulations are not fast enough to allow for large scale Monte Carlo analyses of spacecraft and launch vehicle dynamic behavior with slosh included. It is still desirable to use some type of simplified mechanical analog for the slosh to shorten computation time. Analytic determination of the slosh analog parameters has met with mixed success and is made even more difficult by the introduction of propellant management devices such as elastomeric diaphragms. By subjecting full-sized fuel tanks with actual flight fuel loads to motion similar to that experienced in flight and measuring the forces experienced by the tanks, these parameters can be determined experimentally. Currently, the identification of the model parameters is a laborious trial-and-error process in which the hand-derived equations of motion for the mechanical analog are evaluated and their results compared with the experimental results. This paper will describe efforts by the university component of a team comprised of NASA's Launch Services Program, Embry Riddle Aeronautical University, Southwest Research Institute and Hubert Astronautics to improve the accuracy and efficiency of modeling techniques used to predict these types of motions. Of particular interest is the effect of diaphragms and bladders on the slosh dynamics and how best to model these devices. The previous research was an effort to automate the process of slosh model parameter identification using a MATLAB/SimMechanics-based computer simulation. These results are the first step in applying the same computer estimation to a full-size tank and vehicle propulsion system. The introduction of diaphragms to this experimental set-up will aid in a better and more complete prediction of fuel slosh characteristics and behavior. Automating the parameter identification process will save time and thus allow earlier identification of potential vehicle performance problems.

Chatman, Yadira↗
NASA NTRS1999

Spaceport Support

Command and Control Technologies (CCT) Corporation of Titusville, Florida, a Florida/NASA Business Incubator tenant, is commercializing technology based on Kennedy Space Center's (KSC's) spacecraft ground processing program known as the Control Monitor Unit (CMU). The CMU was developed by engineers with NASA and McDonnell Douglas Space & Defense Systems at KSC to prepare the International Space Station elements for launch. CCT is significantly expanding the commercial capability of the product, called the Command and Control Toolkit(TM) (CCTK), according to Kevin Brown, CCT vice president for business development. In fact, CCT is the only U.S. firm specializing in launch vehicle control systems design and development for spaceports and new launch vehicle programs.

Source record↗
DOE OSTI2025

A Predictive Deep-Reinforcement-Learning-Based Connected Automated Vehicle Anticipatory Longitudinal Control in a Mixed Traffic Lane Change Condition

Maintaining safety and efficiency for mixed traffic consisting of connected automated vehicles (CAVs) and human-driven vehicles (HDVs) is an arduous task due to the inherent HDVs’ stochasticity. Especially for longitudinal control, which is the basic function of vehicle automation, prevailing research primarily considers CAV’s car-following control merely the acceleration and deceleration of leading vehicles. However, this approach overlooks the potential disruptions caused by surrounding vehicles executing lane changes, which can significantly impact the control vehicle’s stability and overall safety. Hence, our study introduces a predictive deep reinforcement learning (DRL) longitudinal CAV controller. This innovative approach leverages prediction from a physics-informed neural network as well as the control capability of DRL to better anticipate and mitigate issues arising from lane-changing, enhancing the safety and efficiency of CAVs in such scenarios. Finally, validated by the numerical simulations embedded with the real-world data, the results indicate that the proposed controller significantly enhances the safety and efficiency of CAVs in situations involving lane changes by other vehicles, showcasing its potential as a valuable tool in advancing CAV technology in mixed traffic.

33 ADVANCED PROPULSION SYSTEMS↗