Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “value stacking”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

Impact of Storage Time on the Needed Capture Efficiency for Volatile Radionuclides - 13369

During the processing of used nuclear fuel (UNF), volatile radionuclides will be discharged from the facility stack if no recovery processes are in place to limit their release. The volatile radionuclides of concern are {sup 3}H, {sup 14}C, {sup 85}Kr, and {sup 129}I. There are three key regulations that address the release of these radionuclides to the environment- 40 CFR 61, 40 CFR 190, and 10 CFR 20. These regulations apply to the total radionuclide release and establish dose limits for the maximum exposed individual (MEI) in the public both in terms of whole body dose and dose to specific organs such as the thyroid. Each radionuclide released to the environment contributes to the total dose to some degree. In this paper we attempt to evaluate the efficiency requirements for the capture processes to limit the doses to the MEI to regulatory levels. Since the total amount of each volatile radionuclide present in the UNF changes with the age of the fuel, the respective capture requirements also change with time. Specifically, we are interested in the impact of the decreasing contribution of {sup 3}H and {sup 85}Kr, which have relatively short half-lives, 12.32 y and 10.76 y, respectively, with the increasing age of the fuel (i.e., time between when the UNF is removed from the reactor and the time it is processed) on the capture requirements. In this paper we examine the capture requirements for these four radionuclides for three fuel types (pressurized water reactor [PWR] with uranium oxide fuel [UOX], PWR with mixed oxide fuel [MOX], and an advanced high temperature gas-cooled reactor [AHTGR]), several burnup values, and time out of reactor extending to 200 y. We calculate doses to the MEI with the EPA code CAP-88 and look at two dose contribution cases. In the first case, we assume that the total allowable dose is attributed to only the four volatile radionuclides. This establishes the lowest capture efficiency value possible. Since this is unrealistic, because it assumes zero dose contribution from all other radionuclides, we also examine a second case, where only 10% of the allowable dose is assigned to the four volatile radionuclides. We calculate the required decontamination factors (DFs) for both of these cases for the three fuel types, multiple fuel burnups, and fuel ages and determine whether or not the dose to the whole body or to the thyroid that drives the capture requirements would require additional effluent controls for the shorter half-life volatile radionuclides based on dose considerations. This analysis indicates that the principal isotopes of concern are generally {sup 3}H and {sup 129}I, the latter requiring the highest DFs. The maximum DF value for {sup 129}I is 8000 for the evaluated cases and assumptions used. ∼60 for fresh fuels. The DF for {sup 14}C could be as high as 30 for certain fuels. These values are based on just meeting the regulatory limits, and additional engineering margins (perhaps 3x to 10x or higher) should be applied to provide a safety factor for compliance. However, by assuming less conservative dose allocations, taller stacks, different radionuclide speciation, fuel aging, and other reprocessing facility design and location parameters, the DF requirements could be significantly reduced. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Excitation functions for (p,x) reactions of niobium in the energy range of E p = 40–90 MeV

In this paper, a stack of thin Nb foils was irradiated with the 100 MeV proton beam at Los Alamos National Laboratory’s Isotope Production Facility, to investigate the 93 Nb(p,4n) 90 Mo nuclear reaction as a monitor for intermediate energy proton experiments and to benchmark state-of-the-art reaction model codes. A set of 38 measured cross sections for nat Nb(p,x) and nat Cu(p,x) reactions between 40–90 MeV, as well as 5 independent measurements of isomer branching ratios, are reported. These are useful in medical and basic science radionuclide productions at intermediate energies. The nat Cu(p,x) 56 Co, nat Cu(p,x) 62 Zn, and nat Cu(p,x) 65 Zn reactions were used to determine proton fluence, and all activities were quantified using HPGe spectrometry. Variance minimization techniques were employed to reduce systematic uncertainties in proton energy and fluence, improving the reliability of these measurements. The measured cross sections are shown to be in excellent agreement with literature values, and have been measured with improved precision compared with previous measurements. This work also reports the first measurement of the nat Nb(p,x) 82m Rb reaction, and of the independent cross sections for nat Cu(p,x) 52g Mn and nat Nb(p,x) 85g Y in the 40–90 MeV region. The effects of nat Si(p,x) 22,24 Na contamination, arising from silicone adhesive in the Kapton tape used to encapsulate the aluminum monitor foils, is also discussed as a cautionary note to future stacked-target cross section measurements. Finally, a priori predictions of the reaction modeling codes CoH, EMPIRE, and TALYS are compared with experimentally measured values and used to explore the differences between codes for the nat Nb(p,x) and nat Cu(p,x) reactions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Nanoscale fluctuation of stacking fault energy strengthens multi-principal element alloys

Chemical randomness and the associated energy fluctuation are essential features of multi-principal element alloys (MPEAs). Due to these features, nanoscale stacking fault energy (SFE) fluctuation is a natural and independent contribution to strengthening MPEAs. However, existing models for conventional alloys (i.e., alloys with one principal element) cannot be applied to MPEAs. The extreme values of SFEs required by such models are unknown for MPEAs, which need to calculate the nanoscale volume relevant to the SFE fluctuation. In the present work, we developed an analytic model to evaluate the strengthening effect through the SFE fluctuation, profuse in MPEAs. The model has no adjustable parameters, and all parameters can be determined from experiments and ab initio calculations. Further, this model explains available experimental observations and provides insightful guidance for designing new MPEAs based on the SFE fluctuation. It generally applies to MPEAs in random states and with chemical short-range order.

36 MATERIALS SCIENCE↗

Taming parallel I/O complexity with auto-tuning

We present an auto-tuning system for optimizing I/O performance of HDF5 applications and demonstrate its value across platforms, applications, and at scale. The system uses a genetic algorithm to search a large space of tunable parameters and to identify effective settings at all layers of the parallel I/O stack. The parameter settings are applied transparently by the auto-tuning system via dynamically intercepted HDF5 calls. To validate our auto-tuning system, we applied it to three I/O benchmarks (VPIC, VORPAL, and GCRM) that replicate the I/O activity of their respective applications. We tested the system with different weak-scaling configurations (128, 2048, and 4096 CPU cores) that generate 30 GB to 1 TB of data, and executed these configurations on diverse HPC platforms (Cray XE6, IBM BG/P, and Dell Cluster). In all cases, the auto-tuning framework identified tunable parameters that substantially improved write performance over default system settings. In conclusion, we consistently demonstrate I/O write speedups between 2x and 100x for test configurations.

97 MATHEMATICS AND COMPUTING↗

Narrow-band EUV Multilayer Coating for the MOSES Sounding Rocket

The Multi-order Solar EUV Spectrograph (MOSES) is a slitless spectrograph designed to study solar He II emission at 303.8 Angstroms, to be launched on a sounding rocket payload. One difference between MOSES and other slitless spectrographs is that the images are recorded simultaneously at three spectral orders, m = -1,0, +l. Another is the addition of a narrow-band multilayer coating on both the grating and the fold flat, which will reject out-of-band lines that normally contaminate the image of a slitless instrument. The primary metrics f a the mating were high peak reflectivity and suppression of Fe XV and XVI emission lines at 284 Angstroms and 335 Angstroms, respectively. We chose B4C/Mg2Si for our material combination since it provides better values for all three metrics together than the other leading candidates Si/Ir, Si/B4C or Si/SiC. Measurements of witness flats at NIST indicate the peak reflectivity at 303.6 is 38.5% for a 15 bilayer stack, while the suppression at 284 Angstroms, is 4.5x and at 335 Angstroms is 18.3x for each of two reflections in the instrument. We present the results of coating the MOSES flight gratings and fold flat, including the spectral response of the fold flat and grating as measured at NIST's SURF III and Brookhaven's X24C beamline.

Owens, Scott M.↗

SSL Freeform Generator v1.00

The Orion spacecraft utilizes a system of Compact Unique Identifiers (CUIs) to identify telemetry measurements in the process of communicating with the ground. While avionic systems are still in development, simulation of telemetric data must be used for the development of dependent systems. The SuperScript Language (SSL) developed by Honeywell Aerospace provides users a programming language for simulation of this data. The use of tools that provide SSL generation capabilities at a higher level allows for faster and more efficient generation of simulation waveforms. Previous SSL Generator implementations such as Orion Scripted Interface Generator (OrionSIG) relied on software supported routines to generate simulation points for the SSL scripts. This provided relevant simulation capabilities, but was reduced in flexibility by the available software routines available. For this approach, software supported routines have been entirely dropped. Rather, the user is required to enter their own simulation waveform input. This allows arbitrarily complex functions to be utilized simulated with maximum degree of freedom for the user.: The idea for this version of the SSL Generator was a mapping of arbitrary waveforms to Orion CUI telemetry data. The SSL Generator implemented offers a higher degree of freedom to the user than previous versions while attempting to maintain abstraction from the underlying SSL script and the Orion CUI data types. As such, many mappings of waveforms to CUIs will simply not work. Certain implementation decisions were made to minimize the damage caused by these unintended side-effects, such as saturation of values exceeding the maximum or minimum bounds of the data type. Other details, such as signed values being represented in unsigned data types, present problems which cant be fixed to an acceptable degree of intended behavior without user input. Awareness of the limitations of all layers of the software stack will increase the productivity of the end-user.

telemetry↗

A Piezoelectric PZT Ceramic Mulitlayer Stack for Energy Harvesting Under Dynamic Forces

Piezoelectric energy harvesting transducers (PEHTs) are commonly used in motion/vibration energy scavenging devices. To date, most researchers have focused on energy harvesting at narrow bandwidths around the mechanical resonance frequency, and most piezoelectric harvesting devices reported in the literature have very low effective piezoelectric coefficient (d(sub eff)) (< 10(exp 4) pC/N). For instance, more than 80% of PEHT related papers are on transverse "31" mode cantilever beam type PEHTs (CBPEHTs) having piezoelectric coefficients of about 100 pC/N. The level of harvested electrical power for CBPEHTs is on the order of microW even at resonance mode. In order to harvest more electrical energy across broader bandwidth, high effective piezoelectric coefficient structures are needed. In this study, we investigate a "33" longitudinal mode, piezoelectric PZT ceramic multilayer stack (PZT-Stack) with high effective piezoelectric coefficient for high-performance PEHTs. The PZT-Stack is composed of 300 layers of 0.1 mm thick PZT plates, with overall dimensions of 32.4 mm X 7.0 mm X 7.0 mm. Experiments were carried out with dynamic forces in a broad bandwidth ranging from 0.5 Hz to 25 kHz. The measured results show that the effective piezoelectric coefficient of the PZT-stack is about 1 X 10(exp 5) pC/N at off-resonance frequencies and 1.39 X 10(exp 6) pC/N at resonance, which is order of magnitude larger than that of traditional PEHTs. The effective piezoelectric coefficients (d(sub eff)) do not change significantly with applied dynamic forces having root mean square (RMS) values ranging from 1 N to 40 N. In resonance mode, 231 mW of electrical power was harvested at 2479 Hz with a dynamic force of 11.6 N(sub rms), and 7.6 mW of electrical power was generated at a frequency of 2114 Hz with 1 N(sub rms) dynamic force. In off-resonance mode, an electrical power of 18.7 mW was obtained at 680 Hz with a 40 N(sub rms) dynamic force. A theoretical model of energy harvesting for the PZT-Stack is established. The modeled results matched well with experimental measurements. This study demonstrated that high effective piezoelectric coefficient structures enable PEHTs to harvest more electrical energy from mechanical vibrations or motions, suggesting an effective design for high-performance low-footprint PEHTs with potential applications in military, aerospace, and portable electronics. In addition, this study provides a route for using piezoelectric multilayer stacks for active or semi-active adaptive control to damp, harvest or transform unwanted dynamic vibrations into useful electrical energy.

Xu, Tian-Bing↗

Tunable stacking fault energies by tailoring local chemical order in CrCoNi medium-entropy alloys

High-entropy alloys (HEAs) are an intriguing new class of metallic materials due to their unique mechanical behavior. Achieving a detailed understanding of structure–property relationships in these materials has been challenged by the compositional disorder that underlies their unique mechanical behavior. Accordingly, in this work, we employ first-principles calculations to investigate the nature of local chemical order and establish its relationship to the intrinsic and extrinsic stacking fault energy (SFE) in CrCoNi medium-entropy solid-solution alloys, whose combination of strength, ductility, and toughness properties approaches the best on record. We find that the average intrinsic and extrinsic SFE are both highly tunable, with values ranging from –43 to 30 mJ•m –2 and from –28 to 66 mJ•m –2 , respectively, as the degree of local chemical order increases. The state of local ordering also strongly correlates with the energy difference between the face-centered cubic ( fcc ) and hexagonal close-packed ( hcp ) phases, which affects the occurrence of transformation-induced plasticity. Here, this theoretical study demonstrates that chemical short-range order is thermodynamically favored in HEAs and can be tuned to affect the mechanical behavior of these alloys. It thus addresses the pressing need to establish robust processing–structure–property relationships to guide the science-based design of new HEAs with targeted mechanical behavior.

36 MATERIALS SCIENCE↗

Reduction of skin effect losses in double-level-T-gate structure

We developed a T-gate technology based on selective wet etching yielding 200 nm wide T-gate structures used for fabrication of High Electron Mobility Transistors (HEMT). Major advantages of our process are the use of only standard photolithographic process and the ability to generate T-gate stacks. A HEMT fabricated on AlGaN/GaN/sapphire with gate length L{sub g} = 200 nm and double-stacked T-gates exhibits 60 GHz cutoff frequency showing ten-fold improvement compared to 6 GHz for the same device with 2 μm gate length. HEMTs with a double-level-T-gate (DLTG) structure exhibit up to 35% improvement of f{sub max} value compared to a single T-gate device. This indicates a significant reduction of skin effect losses in DLTG structure compared to its standard T-gate counterpart. These results agree with the theoretical predictions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Impact of post metal annealing on gate work function engineering for advanced MOS applications

Ultra thin HfO{sub 2} high-k gate dielectric has been deposited directly on strained Si{sub 0.81}Ge{sub 0.19} by Atomic Layer Deposition (ALD) technique. The influence of different types of metal gate electrodes (Al, Au, Pt) on electrical characteristics of Metal-Oxide-Semiconductor capacitors has been studied. Our results show that the electrical characteristics of MOS device are highly dependent on the gate electrodes used. The dependency of electrical characteristics on post metal annealing was studied in detail. The measured flat band (V{sub fb}) and hysteresis (ΔV{sub fb}) from high frequency C-V characteristics were used to study the pre-existing traps in the dielectric. Impact of PMA on interface state density (D{sub it}), border trap density (N{sub bt}) and oxide trap density (Q{sub f/q}) of high-k gate stack were also examined for all the devices. The N{sub bt} and frequency dispersion significantly reduces to ~2.77x1010 cm{sup −2} and ~11.34 % respectively in case of Al electrode with a Dit value of ~4x10{sup 12} eV{sup −1}cm{sup −2} after PMA (350°C) in N{sub 2}, suggesting an improvement in device performance while Pt electrode shows a much less value of ΔVfb (~0.02 V) and Dit (~3.44x10{sup 12} eV{sup −1}cm{sup −2}) after PMA.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Evaluation of two-dimensional bolus effect of immobilization/support devices on skin doses: A radiochromic EBT film dosimetry study in phantom

Purpose: In this study, the authors have quantified the two-dimensional (2D) perspective of skin dose increase using EBT film dosimetry in phantom in the presence of patient immobilization devices during conventional and IMRT treatments. Methods: For 6 MV conventional photon field, the authors evaluated and quantified the 2D bolus effect on skin doses for six different common patient immobilization/support devices, including carbon fiber grid with Mylar sheet, Orfit carbon fiber base plate, balsa wood board, Styrofoam, perforated AquaPlast sheet, and alpha-cradle. For 6 and 15 MV IMRT fields, a stack of two film layers positioned above a solid phantom was exposed at the air interface or in the presence of a patient alpha-cradle. All the films were scanned and the pixel values were converted to doses based on an established calibration curve. The authors determined the 2D skin dose distributions, isodose curves, and cross-sectional profiles at the surface layers with or without the immobilization/support device. The authors also generated and compared the dose area histograms (DAHs) and dose area products from the 2D skin dose distributions. Results: In contrast with 20% relative dose [(RD) dose relative to d{sub max} on central axis] at 0.0153 cm in the film layer for 6 MV 10x10 cm{sup 2} open field, the average RDs at the same depth in the film layer were 71%, 69%, 55%, and 57% for Orfit, balsa wood, Styrofoam, and alpha-cradle, respectively. At the same depth, the RDs were 54% under a strut and 26% between neighboring struts of a carbon fiber grid with Mylar sheet, and between 34% and 56% for stretched perforated AquaPlast sheet. In the presence of the alpha-cradle for the 6 MV (15 MV) IMRT fields, the hot spot doses at the effective measurement depths of 0.0153 and 0.0459 cm were 140% and 150% (83% and 89%), respectively, of the isocenter dose. The enhancement factor was defined as the ratio of a given DAH parameter (minimum dose received in a given area) with and without the support device. For 6 MV conventional 10x10 cm{sup 2} field, the enhancement factor was the highest (3.4) for the Orfit carbon fiber plate. As for the IMRT field, the enhancement factors varied with the size of the area of interest and were as high as 3.8 (4.3) at the hot spot of 5 cm{sup 2} area in the top film layer (0.0153 cm) for 6 MV (15 MV) beams. Conclusions: Significant 2D bolus effect on skin dose in the presence of patient support and immobilization devices was confirmed and quantified with EBT film dosimetry. Furthermore, the EBT film has potential application for in vivo monitoring of the 2D skin dose distributions during patient treatments.

60 APPLIED LIFE SCIENCES↗

Phase changes in fluoropolymer binders

Motivation: Understanding fluoropolymer binder structure and aging response continues to be an important goal for the prediction and assessment of polymer bonded explosive compositions within the stockpile. As part of ongoing efforts within NNM, we are developing new methods to quantify crystallization and chemical degradation within aged Fluoropolymer materials. Significance: Time, temperature and radiation are known to alter the mechanical properties of fluoropolymers as crystalline domains nucleate and grow within the material. However, current methods do not accurately quantify and assess the degree or rapidity of these physical aging processes. For this reason, we are developing methods that directly measure crystalline domain, composition, size and shape and cross-correlating them with traditional techniques. Progress: Most recently, we thermally aged fluoropolymer binder, FK800, for various durations up to 23 days at several temperatures including: 25C (red), 35C (green), and 60C (blue). We used wide angle X-ray scattering (WAXS) to observe when crystalline peaks emerged, signaling a phase transition from amorphous to partially crystalline. Some of these data are summarized in Figure 1. As expected, samples held at 25C (red), which is below the glass transition temperature at 28C, remain amorphous – the WAXS data (Figure 1b) lacks sharp peaks indicative of crystallinity and the ultra-small angle X-ray scattering (USAXS) also has a smooth background without peaks indicative of structure (Figure 1a). By contrast, samples held at 35C and 60C have new peaks in both the USAXS and WAXS data. The structure is clearer after subtracting off the amorphous background from the WAXS data (Figure 1c). These data show that samples aged at 60C are more crystalline as determined by the more defined peaks and also have a larger lattice constant as seen by the shift in peak position as compared to the 35C samples. The corresponding USAXS data (Figure 1a) indicate that the size of the crystals was larger at 60C than at 35C as seen by the shift in the knee position to lower q-values. Interestingly, the shape of the scatter curve also changed, which indicates a change in morphology. Atomic force microscopy (AFM) was used to image the fluoropolymer (Figure 1c-e). At 35C, ~50nm long stacked crystal plates are observed. High resolution imaging shows that the stacks consist of 2-6 lamellae that are spaced approximately 3nm apart. At 60C, the individual lamella appear both thicker and longer and are intertwined to fill the surface. Morphological data such as these images help to interpret & model volume averaging techniques like X-ray scattering and NMR. We also expect the shift from isolated islands to intertwined clusters to impact mechanical properties.

36 MATERIALS SCIENCE↗

Environmental and Operational Performance of CO2-EOR as a CCUS Technology: A Cranfield Example with Dynamic LCA Considerations

This study evaluates the potential of carbon dioxide-enhanced oil recovery (CO2-EOR) to reduce greenhouse gas emissions without compromising oil production goals. A novel, dynamic carbon lifecycle analysis (d-LCA) was developed and used to understand the evolution of the environmental impact (CO2 emissions) and mitigation (geologic CO2 storage) associated with an expanded carbon capture, utilization and storage (CCUS) system, from start to closure of operations. EOR operational performance was assessed through CO2 utilization rates, which relate usage of CO2 to oil production. Because field operational strategies have a significant impact on reservoir engineering parameters that affect both CO2 storage and oil production (e.g., sweep efficiency, flood conformance, fluid saturation distribution), we conducted a scenario analysis that assessed the operational and environmental performance of four common and novel CO2-EOR field development strategies. Each scenario was evaluated with and without stacked saline carbon storage, an EOR/storage combination strategy where excess CO2 from the recycling facility is injected into an underlying saline aquifer for long-term carbon storage. The dynamic interplay between operational and environmental performance formed the basis of our CCUS technology analysis. The results showed that all CO2-EOR evaluated scenarios start operating with a negative carbon footprint and, years into the project, transitioned into operating with a positive carbon footprint. The transition points were significantly different in each scenario. Water-alternating-gas (WAG) was identified as the CO2 injection strategy with the highest potential to co-optimize EOR and carbon storage goals. The results provide an understanding of the evolution of the system’s net carbon balance in all four field development strategies studied. The environmental performance can be significantly improved with stacked storage, where a negative carbon footprint can be maintained throughout the life of the operation in most of the injection scenarios modelled. This information will be useful to CO2-EOR operators seeking value in storing more CO2 through a carbon credit program (e.g., the 45Q carbon credit program in the USA). Most importantly, this study serves as confirmation that CO2-EOR can be operationally designed to both enhance oil production and reduce greenhouse gas emissions into the atmosphere.

58 GEOSCIENCES↗

SYNTHESIS OF NOVEL ALL-DIELECTRIC GRATING FILTERS USING GENETIC ALGORITHMS

We are concerned with the design of inhomogeneous, all dielectric (lossless) periodic structures which act as filters. Dielectric filters made as stacks of inhomogeneous gratings and layers of materials are being used in optical technology, but are not common at microwave frequencies. The problem is then finding the periodic cell's geometric configuration and permittivity values which correspond to a specified reflectivity/transmittivity response as a function of frequency/illumination angle. This type of design can be thought of as an inverse-source problem, since it entails finding a distribution of sources which produce fields (or quantities derived from them) of given characteristics. Electromagnetic sources (electric and magnetic current densities) in a volume are related to the outside fields by a well known linear integral equation. Additionally, the sources are related to the fields inside the volume by a constitutive equation, involving the material properties. Then, the relationship linking the fields outside the source region to those inside is non-linear, in terms of material properties such as permittivity, permeability and conductivity. The solution of the non-linear inverse problem is cast here as a combination of two linear steps, by explicitly introducing the electromagnetic sources in the computational volume as a set of unknowns in addition to the material unknowns. This allows to solve for material parameters and related electric fields in the source volume which are consistent with Maxwell's equations. Solutions are obtained iteratively by decoupling the two steps. First, we invert for the permittivity only in the minimization of a cost function and second, given the materials, we find the corresponding electric fields through direct solution of the integral equation in the source volume. The sources thus computed are used to generate the far fields and the synthesized triter response. The cost function is obtained by calculating the deviation between the synthesized value of reflectivity/transmittivity and the desired one. Solution geometries for the periodic cell are sought as gratings (ensembles of columns of different heights and widths), or combinations of homogeneous layers of different dielectric materials and gratings. Hence the explicit unknowns of the inversion step are the material permittivities and the relative boundaries separating homogeneous parcels of the periodic cell.

Zuffada, Cinzia↗

The Gas Distribution in the Outer Regions of Galaxy Clusters

Aims. We present our analysis of a local (z = 0.04 - 0.2) sample of 31 galaxy clusters with the aim of measuring the density of the X-ray emitting gas in cluster outskirts. We compare our results with numerical simulations to set constraints on the azimuthal symmetry and gas clumping in the outer regions of galaxy clusters. Methods. We have exploited the large field-of-view and low instrumental background of ROSAT/PSPC to trace the density of the intracluster gas out to the virial radius, We stacked the density profiles to detect a signal beyond T200 and measured the typical density and scatter in cluster outskirts. We also computed the azimuthal scatter of the profiles with respect to the mean value to look for deviations from spherical symmetry. Finally, we compared our average density and scatter profiles with the results of numerical simulations. Results. As opposed to some recent Suzaku results, and confirming previous evidence from ROSAT and Chandra, we observe a steepening of the density profiles beyond approximately r(sub 500). Comparing our density profiles with simulations, we find that non-radiative runs predict density profiles that are too steep, whereas runs including additional physics and/ or treating gas clumping agree better with the observed gas distribution. We report high-confidence detection of a systematic difference between cool-core and non cool-core clusters beyond approximately 0.3r(sub 200), which we explain by a different distribution of the gas in the two classes. Beyond approximately r(sub 500), galaxy clusters deviate significantly from spherical symmetry, with only small differences between relaxed and disturbed systems. We find good agreement between the observed and predicted scatter profiles, but only when the 1% densest clumps are filtered out in the ENZO simulations. Conclusions. Comparing our results with numerical simulations, we find that non-radiative simulations fail to reproduce the gas distribution, even well outside cluster cores. Although their general behavior agrees more closely with the observations, simulations including cooling and star formation convert a large amount of gas into stars, which results in a low gas fraction with respect to the observations. Consequently, a detailed treatment of gas cooling, star formation, AGN feedback, and consideration of gas clumping is required to construct realistic models of the outer regions of clusters.

Eckert, D.↗

Critical Causes of Degradation in Integrated Laboratory Scale Cells during High Temperature Electrolysis

An ongoing project at Idaho National Laboratory involves generating hydrogen from steam using solid oxide electrolysis cells (SOEC). This report describes background information about SOECs, the Integrated Laboratory Scale (ILS) testing of solid-oxide electrolysis stacks, ILS performance degradation, and post-test examination of SOECs by various researchers. The ILS test was a 720- cell, three-module test comprised of 12 stacks of 60 cells each. A peak H2 production rate of 5.7 Nm3/hr was achieved. Initially, the module area-specific resistance ranged from 1.25 Ocm2 to just over 2 Ocm2. Total H2 production rate decreased from 5.7 Nm3/hr to a steady state value of 0.7 Nm3/hr. The decrease was primarily due to cell degradation. Post test examination by Ceramatec showed that the hydrogen electrode appeared to be in good condition. The oxygen evolution electrode does show delamination in operation and an apparent foreign layer deposited at the electrolyte interface. Post test examination by Argonne National Laboratory showed that the O2-electrode delaminated from the electrolyte near the edge. One possible reason for this delamination is excessive pressure buildup with high O2 flow in the over-sintered region. According to post test examination at the Massachusetts Institute of Technology, the electrochemical reactions have been recognized as one of the prevalent causes of their degradation. Specifically, two important degradation mechanisms were examined: (1) transport of Crcontaining species from steel interconnects into the oxygen electrode and LSC bond layers in SOECs, and (2) cation segregation and phase separation in the bond layer. INL conducted a workshop October 27, 2008 to discuss possible causes of degradation in a SOEC stack. Generally, it was agreed that the following are major degradation issues relating to SOECs: • Delamination of the O2-electrode and bond layer on the steam/O2-electrode side • Contaminants (Ni, Cr, Si, etc.) on reaction sites (triple phase boundary) • Loss of electrical/ionic conductivity of electrolyte.

99 GENERAL AND MISCELLANEOUS↗

Entropic penalties in circular DNA assembly

The thermodynamic properties of DNA circular molecules are investigated by a new path integral computational method which treats in the real space the fundamental forces stabilizing the molecule. The base pair and stacking contributions to the classical action are evaluated separately by simulating a broad ensemble of twisted conformations. We obtain, for two short sequences, a free energy landscape with multiple wells corresponding to the most convenient values of helical repeat. Our results point to a intrinsic flexibility of the circular structures in which the base pair fluctuations move the system from one well to the next thus causing the local unwinding of the helix. The latter is more pronounced in the shorter sequence whose cyclization causes a higher bending stress. The entropic reductions associated to the formation of the ordered helicoidal structure are estimated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Grism Lens-Amplified Survey from space (GLASS). III. A census of Lyα emission at z≳7 from HST spectroscopy

We present a census of Lyα emission at z≳7, utilizing deep near-infrared Hubble Space Telescope grism spectroscopy from the first six completed clusters of the Grism Lens-Amplified Survey from Space (GLASS). In 24/159 photometrically selected galaxies we detect emission lines consistent with Lyα in the GLASS spectra. Based on the distribution of signal-to-noise ratios and on simulations, we expect the completeness and the purity of the sample to be 40%–100% and 60%–90%, respectively. For the objects without detected emission lines we show that the observed (not corrected for lensing magnification) 1σ flux limits reach 5 × 10{sup −18} erg s{sup −1} cm{sup −2} per position angle over the full wavelength range of GLASS (0.8–1.7 μm). Based on the conditional probability of Lyα emission measured from the ground at z∼7, we would have expected 12–18 Lyα emitters. This is consistent with the number of detections, within the uncertainties, confirming the drop in Lyα emission with respect to z∼6. Deeper follow-up spectroscopy, here exemplified by Keck spectroscopy, is necessary to improve our estimates of completeness and purity and to confirm individual candidates as true Lyα emitters. These candidates include a promising source at z = 8.1. The spatial extent of Lyα in a deep stack of the most convincing Lyα emitters with 〈z〉 = 7.2 is consistent with that of the rest-frame UV continuum. Extended Lyα emission, if present, has a surface brightness below our detection limit, consistent with the properties of lower-redshift comparison samples. From the stack we estimate upper limits on rest-frame UV emission line ratios and find f{sub CIV}/f{sub Lyα}≲0.32 and f{sub CIII]}/f{sub Lyα}≲0.23, in good agreement with other values published in the literature.

79 ASTRONOMY AND ASTROPHYSICS↗