Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “two step target”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

Vehicle Detection for RCTA/ANS (Autonomous Navigation System)

Using a stereo camera pair, imagery is acquired and processed through the JPLV stereo processing pipeline. From this stereo data, large 3D blobs are found. These blobs are then described and classified by their shape to determine which are vehicles and which are not. Prior vehicle detection algorithms are either targeted to specific domains, such as following lead cars, or are intensity- based methods that involve learning typical vehicle appearances from a large corpus of training data. In order to detect vehicles, the JPL Vehicle Detection (JVD) algorithm goes through the following steps: 1. Take as input a left disparity image and left rectified image from JPLV stereo. 2. Project the disparity data onto a two-dimensional Cartesian map. 3. Perform some post-processing of the map built in the previous step in order to clean it up. 4. Take the processed map and find peaks. For each peak, grow it out into a map blob. These map blobs represent large, roughly vehicle-sized objects in the scene. 5. Take these map blobs and reject those that do not meet certain criteria. Build descriptors for the ones that remain. Pass these descriptors onto a classifier, which determines if the blob is a vehicle or not. The probability of detection is the probability that if a vehicle is present in the image, is visible, and un-occluded, then it will be detected by the JVD algorithm. In order to estimate this probability, eight sequences were ground-truthed from the RCTA (Robotics Collaborative Technology Alliances) program, totaling over 4,000 frames with 15 unique vehicles. Since these vehicles were observed at varying ranges, one is able to find the probability of detection as a function of range. At the time of this reporting, the JVD algorithm was tuned to perform best at cars seen from the front, rear, or either side, and perform poorly on vehicles seen from oblique angles.

Brennan, Shane↗

Development of 225 Ac Production from Low Isotopic Dilution 229 Th

The promise of 225 Ac targeted alpha therapies has been on the horizon for the last two decades. TerraPower Isotopes are uniquely suited to produce clinically relevant quantities of 225 Ac through the decay of 229 Th. Herein, a rapid processing scheme to isolate radionuclidic and radioisotopically pure 225 Ac in good yield (98%) produced from 229 Th that contains significant quantities of 228 Th activity is described. The characterization of each step of the process is presented along with the detailed characterization of the resulting 225 Ac isotopic starting material that will support the cancer research and development efforts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Isolation and Purification of Monofunctional Methoxyphenols from Loblolly Pine Biocrude

Methoxyphenols (MPs) are valuable chemicals in liquid intermediates from pyrolysis of lignocellulosic biomass. The use of a single technique to recover a high-purity bioproduct of MPs from pyrolysis liquid is challenging. The purpose of this study is to combine distillation and chromatography techniques in sequence to recover exclusively eugenols and guaiacols as monofunctional MPs in biocrude produced from pyrolysis of loblolly pine with a nonzeolite alumina catalyst. A biocrude containing 11.0 wt% of the targeted monofunctional MPs was first distilled in two stages to recover an MP-rich fraction with 49.3 wt% concentration of MPs at a recovery efficiency of 86.9%. A flash chromatography separation using silica gel adsorbent was then used to purify the MP-enriched distillate. A final MP bioproduct with average purity of 87.3-93.1 wt% was achieved. Here, the average efficiency of the chromatography separation step varied between 73.9-82.5% depending on the silica particle size used.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Evolved strains of Scheffersomyces stipitis achieving high ethanol productivity on acid- and base-pretreated biomass hydrolyzate at high solids loading

Lignocellulosic biomass is an abundant, renewable feedstock useful for the production of fuel-grade ethanol via the processing steps of pretreatment, enzyme hydrolysis, and microbial fermentation. Traditional industrial yeasts do not ferment xylose and are not able to grow, survive, or ferment in concentrated hydrolyzates that contain enough sugar to support economical ethanol recovery since they are laden with toxic byproducts generated during pretreatment. Repetitive culturing in two types of concentrated hydrolyzates was applied along with ethanol challenged xylose-fed continuous culture to force targeted evolution of the native pentose fermenting yeast Scheffersomyces (Pichia) stipitis strain NRRL Y-7124 maintained in the ARS Culture Collection, Peoria, IL. Isolates collected from various enriched populations were screened and ranked based on relative xylose uptake rate and ethanol yield. Ranking on hydrolyzates with and without nutritional supplementation was used to identify those isolates with best performance across diverse conditions. Robust S. stipitis strains adapted to perform very well in enzyme hydrolyzates of high solids loading ammonia fiber expansion-pretreated corn stover (18% weight per volume solids) and dilute sulfuric acid-pretreated switchgrass (20% w/v solids) were obtained. Improved features include reduced initial lag phase preceding growth, significantly enhanced fermentation rates, improved ethanol tolerance and yield, reduced diauxic lag during glucose-xylose transition, and ability to accumulate >40 g/L ethanol in <167 h when fermenting hydrolyzate at low initial cell density of 0.5 absorbance units and pH 5 to 6.

09 BIOMASS FUELS↗

Identification of MicroRNAs and transcript targets in Camelina sativa by deep sequencing and computational methods

Camelina sativa is an annual oilseed crop that is under intensive development for renewable resources of biofuels and industrial oils. MicroRNAs, or miRNAs, are endogenously encoded small RNAs that play key roles in diverse plant biological processes. Here, we conducted deep sequencing on small RNA libraries prepared from camelina leaves, flower buds and two stages of developing seeds corresponding to initial and peak storage products accumulation. Computational analyses identified 207 known miRNAs belonging to 63 families, as well as 5 novel miRNAs. These miRNAs, especially members of the miRNA families, varied greatly in different tissues and developmental stages. The predicted miRNA target genes are involved in a broad range of physiological functions including lipid metabolism. This report is the first step toward elucidating roles of miRNAs in C. sativa and will provide additional tools to improve this oilseed crop for biofuels and biomaterials.

09 BIOMASS FUELS↗

Observation of three-proton-decaying resonant states in 21 Al

The structure of the proton-unbound nucleus 21 Al has been studied via proton transfer from a 9 Be target to a 20 Mg beam at E/A = 103 MeV. Three resonant states in 21 Al are identified by the invariant-mass reconstruction of 18 Ne + 3p events. The decay-energy spectra for the two subsystems of 21 Al , i.e. 18 Ne+ 1 p and 18 Ne+ 2 p , indicate that the observed resonant state with the lowest energy has decay branches consisting of three sequential steps of one-proton decay. Based on the ab initio and the distorted-wave Born approximation (DWBA) calculations, this resonant state at Ε ⁎ = 6.09(11) MeV likely has a spin-parity of (1/2 + - 7/2 + ). Meanwhile, the possibility that the observed resonant peak represents an admixture of several states cannot be ruled out. The good isospin-symmetry of the low-lying states with d 5/2 , d 3/2 configurations in the 21 Al- 21 O pair and the ab initio calculations indicate weak configuration mixing between the s - and d -orbital components. The systematics of experimental energy differences between the 5/2 + ground state and lowest-lying 3/2 + excited state for isotopes (isotones) of Z(N) = 13 suggest a likely semimagic nature of 21 Al.

21Al↗

High field terahertz emission from relativistic laser-driven plasma wakefields

We propose a method to generate high field terahertz (THz) radiation with peak strength of GV/cm level in the THz frequency gap range of 1–10 THz using a relativistic laser interaction with a gaseous plasma target. Due to the effect of local pump depletion, an initially Gaussian laser pulse undergoes leading edge erosion and eventually evolves to a state with leading edge being step function. Interacting with such a pulse, electrons gain transverse residual momentum and excite net transverse currents modulated by the relativistic plasma frequency. These currents give rise to the low frequency THz emission. We demonstrate this process with one and two dimensional particle-in-cell simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Producing multicharged fullerene ion beam extracted from the second stage of tandem-type ECRIS

We have been constructing the tandem-type electron cyclotron resonance ion source (ECRIS). Two ion sources of the tandem-type ECRIS are possible to generate plasma individually, and they also confined individual ion species by each different plasma parameter. Hence, it is considered to be suitable for new materials production. As the first step, we try to produce and extract multicharged C{sub 60} ions by supplying pure C{sub 60} vapor in the second stage plasma because our main target is producing the endohedral fullerenes. We developed a new evaporator to supply fullerene vapor, and we succeeded in observation about multicharged C{sub 60} ion beam in tandem-type ECRIS for the first time.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Functional and Structural Impact of Target Uridine Substitutions on the H/ACA Ribonucleoprotein Particle Pseudouridine Synthase

Box H/ACA ribonucleoprotein protein particles catalyze the majority of pseudouridylation in functional RNA. Different from stand alone pseudouridine synthases, the RNP pseudouridine synthase comprises multiple protein subunits and an RNA subunit. Previous studies showed that each subunit, regardless its location, is sensitive to the step of subunit placement at the catalytic center and potentially to the reaction status of the substrate. Here we describe the impact of chemical substitutions of target uridine on enzyme activity and structure. We found that 3-methyluridine in place of uridine inhibited its isomerization while 2{prime}-deoxyuridine or 4-thiouridine did not. Significantly, crystal structures of an archaeal box H/ACA RNP bound with the nonreactive and the two postreactive substrate analogues showed only subtle structural changes throughout the assembly except for a conserved tyrosine and a substrate anchoring loop of Cbf5. Our results suggest a potential role of these elements and the subunit that contacts them in substrate binding and product release.

36 MATERIALS SCIENCE↗

Separation and determination of ultratrace rhenium quantities in molybdenum matrix

The production of very pure molybdenum, free of Re even at ultratrace levels, is extremely important in meeting target purity specifications during the production of 99 Mo for medical applications. Here we propose two methods for separating ultratrace levels of Re from a bulk Mo matrix using either solvent extraction or extraction chromatography, combined with inductively coupled plasma quadrupole mass spectrometry (ICP-MS) detection. Re is extracted (D > 70) from solutions in sulfuric acid as a complex with tri-n-butyl phosphate. Scrubbing and washing steps result in total decontamination factors for Mo up to 1,700 for solvent extraction and 3,500 for extraction chromatography. Re is stripped into a 3 M NH 4 OH matrix and analyzed by ICP-MS. Detection (L D ) and quantification (L Q ) limits were optimized by matrix-matching to allow detection of Re in strip solutions at levels of L D = 0.1 ng Re/g-Mo and L Q = 0.3 ng Re/g-Mo in Mo powder samples. By employing these two extraction methods, excellent recoveries of Re from bulk Mo are achieved, and the L Q is improved by a factor of 5 x 10 4 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Reaching the equilibrium state of the frustrated triangular Ising magnet Ca 3 Co 2 O 6

Ca 3 Co 2 O 6 is a frustrated magnet consisting of a triangular arrangement of chains of Ising spins. It shows regular magnetization steps versus magnetic field every 1.2 T that are metastable with very slow dynamics. This has puzzled the community for many years and given rise to numerous potential theories. Here we approach the problem by seeking the elusive magnetic equilibrium state at T=2 K. To this end, we explore two approaches: (1) bypassing the slow dynamics produced by changing fields by instead field-cooling directly to the target temperature and (2) quantum annealing in transverse magnetic fields. While we observe no measurable effect of the quantum annealing in fields up to 7 T, which is likely due to the large Ising anisotropy of Co spins in this material, we find that for the field cooling in longitudinal fields we achieve the predicted equilibrium 1/3 magnetization. We perform Monte Carlo simulations of the ground state phase diagram and we also simulate the quantum annealing process and find good agreement between experiment and theory. Thus we present an investigation of the elusive ground state properties of the canonical frustrated triangular system Ca 3 Co 2 O 6 .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Evidence that cytochrome b{sub 5} acts as a redox donor in CYP17A1 mediated androgen synthesis

Cytochrome P450 17A1 (CYP17A1) is an important drug target for castration resistant prostate cancer. It is a bi-functional enzyme, catalyzing production of glucocorticoid precursors by hydroxylation of pregnene-nucleus, and androgen biosynthesis by a second C−C lyase step, at the expense of glucocorticoid production. Cytochrome b{sub 5} (cyt b{sub 5}) is known to be a key regulator of the androgen synthesis reaction in vivo, by a mechanism that is not well understood. Two hypotheses have been proposed for the mechanism by which cyt b{sub 5} increases androgen biosynthesis. Cyt b{sub 5} could act as an allosteric effector, binding to CYP17A1 and either changing its selective substrate affinity or altering the conformation of the P450 to increase the catalytic rate or decrease unproductive uncoupling channels. Alternatively, cyt b{sub 5} could act as a redox donor for supply of the second electron in the P450 cycle, reducing the oxyferrous complex to form the reactive peroxo-intermediate. To understand the mechanism of lyase enhancement by cyt b{sub 5}, we generated a redox-inactive form of cyt b{sub 5}, in which the heme is replaced with a Manganese-protoporphyrin IX (Mn-b{sub 5}), and investigated enhancement of androgen producing lyase reaction by CYP17A1. Given the critical significance of a stable membrane anchor for all of the proteins involved and the need for controlled stoichiometric ratios, we employed the Nanodisc system for this study. The redox inactive form was observed to have no effect on the lyase reaction, while reactions with the normal heme-iron containing cyt b{sub 5} were enhanced ∼5 fold as compared to reactions in the absence of cyt b{sub 5}. We also performed resonance Raman measurements on ferric CYP17A1 bound to Mn-b{sub 5}. Upon addition of Mn-b{sub 5} to Nanodisc reconstituted CYP17A1, we observed clear evidence for the formation of a b{sub 5}-CYP17A1 complex, as noted by changes in the porphyrin modes and alteration in the proximal Fe−S vibrational frequency. Thus, although Mn-b{sub 5} binds to CYP17A1, it is unable to enhance the lyase reaction, strongly suggesting that cyt b{sub 5} has a redox effector role in enhancement of the CYP17A1 mediated lyase reaction necessary for androgen synthesis. - Highlights: • Cyt b{sub 5} role in human CYP17A1 mediated androgen synthesis was probed in Nanodiscs. • Native cyt b{sub 5} enhances androgen synthesis by CYP17A1. • Redox inactive Mn cyt b{sub 5} does not enhance androgen synthesis by CYP17A1. • Interactions with Cyt b{sub 5} perturb Fe−S and heme Raman modes of CYP17A1. • Cyt b{sub 5} acts as a redox donor for CYP17A1 mediated androgen synthesis.

60 APPLIED LIFE SCIENCES↗

Assessment of Different Application Grades of Post-Consumer Recycled (PCR) Polyolefins from Material Recovery Facilities (MRFs) in the United States

The recycling of plastics has been gaining traction in the following years as many companies, organizations, and governments are pushing toward a more circular economy. However, plastic recycling rates are still small compared to those of plastic production, especially for polyolefins, such as high-density polyethylene (HDPE) and polypropylene (PP). With the goal of finding applications for recycled plastic resin, recyclers can face some challenges associated with the heterogeneity in the polymer properties of plastic waste streams, which could hinder the full potential of recycling due to the lack of a consistent feedstock. Here, this study assessed how an additional sorting step of recycled HDPE and PP streams, separating them into two categories based on the previous application, impacts the recycled polymer properties, such as physical, molecular, and thermal. It was demonstrated that manually separating HDPE articles previously processed by extrusion blow molding (EBM) or injection molding (IM) and PP articles by thermoforming (TF) or IM could yield recycled resins with more consistent properties, considering the significant differences between them. This highlights that an additional sorting step would allow recyclers to target more premium or currently unattainable plastic processing applications with postconsumer recycled (PCR) resins, which could significantly promote an increase in plastic recycling rates. Nevertheless, the development of new technologies is needed to automate this extra sorting step, as with the increase in scale manual sortation could not be feasible and cost-effective, reducing the attractiveness of using PCR resins in comparison to virgin ones.

36 MATERIALS SCIENCE↗

Structures of proline-rich peptides bound to the ribosome reveal a common mechanism of protein synthesis inhibition

Here, with bacterial resistance becoming a serious threat to global public health, antimicrobial peptides (AMPs) have become a promising area of focus in antibiotic research. AMPs are derived from a diverse range of species, from prokaryotes to humans, with a mechanism of action that often involves disruption of the bacterial cell membrane. Proline-rich antimicrobial peptides (PrAMPs) are instead actively transported inside the bacterial cell where they bind and inactivate specific targets. Recently, it was reported that some PrAMPs, such as Bac7 1–35 , oncocins and apidaecins, bind and inactivate the bacterial ribosome. Here we report the crystal structures of Bac7 1–35 , Pyrrhocoricin, Metalnikowin and two oncocin derivatives, bound to the Thermus thermophilus 70S ribosome. Each of the PrAMPs blocks the peptide exit tunnel of the ribosome by simultaneously occupying three well characterized antibioticbinding sites and interferes with the initiation step of translation, thereby revealing a common mechanism of action used by these PrAMPs to inactivate protein synthesis. Our study expands the repertoire of PrAMPs and provides a framework for designing new-generation therapeutics.

59 BASIC BIOLOGICAL SCIENCES↗

Xenon diffusion following ion implantation into feldspar - Dependence on implantation dose

The diffusion properties of xenon implanted into feldspar, a major mineral in meteorites and lunar samples, are investigated in light of the importance of xenon diffusion in the interpretation of early solar system chronologies and the retention time of solar-wind-implanted Xe. Known doses of Xe ions were implanted at an energy of 200 keV into single-crystal plagioclase targets, and depth profiles were measured by alpha particle backscattering before and after annealing for one hour at 900 or 1000 C. The fraction of Xe retained following annealing is found to be strongly dependent on implantation dose, being greatest at a dose of 3 x 10 to the 15th ions/sq cm and decreasing at higher and lower doses. Xe retention is also observed to be unaffected by two-step anneals, or by implantation with He or Ar. Three models of the dose-dependent diffusion properties are considered, including epitaxial crystal regrowth during annealing controlled by the extent of radiation damage, the creation of trapping sites by radiation damage, and the inhibition of recrystallization by Xe during annealing

Melcher, C. L.↗

Brachypodium SPEECHLESS2 Promoter Drives Expression of a Synthetic EPF to Reduce Stomatal Density in Sugarcane Without Pleiotropic Effects

Stomata are microscopic pores that regulate the exchange of CO 2 and water vapour, making them a major target for engineering plants with improved intrinsic water use efficiency (iWUE). Proof-of-concept studies have demonstrated the potential to increase iWUE by reducing stomatal density (SD) and stomatal conductance (g sw ) by ubiquitously expressing EPIDERMAL PATTERNING FACTOR (EPF) family genes. However, unwanted effects on leaf, stem and reproductive traits are often observed when EPFs are misexpressed in this fashion. We sought to test if these effects result from pleiotropy and to identify a targeted promoter that can circumvent the side effects while retaining the desired reduction in SD. A previously reported synthetic EPF (EPF syn ) was expressed in sugarcane ( Saccharum spp.) using two putatively tissue-specific promoters from Brachypodium distachyon (BdCESA7p and BdSPCH2p) and a ubiquitous control from Zea mays (ZmUBI4p). BdSPCH2p control reduced SD to statistically equivalent levels as ZmUBI4p on the abaxial (23%) and adaxial (23%) leaf surfaces. ZmUB4p and BdCESA7p induce expression in four tissue types often associated with pleiotropic effects in EPF-expressing low SD plants. Transgenic plants carrying either the BdCESA7p or ZmUBI4p EPF syn cassettes displayed leaf chlorosis, reduced leaf nitrogen and chlorophyll content, and altered stem architecture. However, transgenic events harboring the BdSPCH2p EPF syn cassette restricted EPF syn expression to the stomatal development zone and leaf nodal tissues and produced transgenic plants without the associated pleiotropic effects. These results represent an important step toward engineering low-SD crops since they show that targeted gene expression can engineer stomatal patterning without impairing agronomically important traits.

59 BASIC BIOLOGICAL SCIENCES↗

Installation protocol for charge transfer dissociation mass spectrometry on ion trapping mass spectrometers

Abstract Rationale Charge transfer dissociation (CTD) is a novel fragmentation technique that demonstrates enhanced structural characterization for a wide variety of molecules compared to standard fragmentation techniques like collision‐induced dissociation (CID). Alternative fragmentation techniques, such as electron transfer dissociation, electron capture dissociation, and ultraviolet photodissociation, also overcome many of the shortfalls of CID, but none of them are a silver bullet that can adequately characterize a wide variety of structures and charge states of target compounds. Given the diversity of structural classes and their occasional obstinance towards certain activation techniques, alternative fragmentation techniques are required that rely on novel or alternative modes of activation. Methods Herein, we present a step‐by‐step protocol for the installation of CTD on a quadrupole ion trap mass spectrometer and best practices for optimizing the signal‐to‐noise ratio and acquisition times for CTD mass spectra. Results In addition to two CTD installations in the Jackson laboratory, CTD has also been installed, and is currently in operation, on two 3D ion trap mass spectrometers in France: one in the laboratory of Dr. David Ropartz and Dr. Hélène Rogneaux at INRAE in Nantes, and the other in the laboratory of Dr. Jean‐Yves Salpin at Université d'Évry Val‐d'Essonne, part of the Paris‐Saclay University system. Conclusions Here, we provide a visual protocol to help others accomplish the instrument modification.

47 OTHER INSTRUMENTATION↗