Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “two dimensional materials”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

Transparency of graphene for low-energy electrons measured in a vacuum-triode setup

Graphene, being an atomically thin conducting sheet, is a candidate material for gate electrodes in vacuum electronic devices, as it may be traversed by low-energy electrons. The transparency of graphene to electrons with energies between 2 and 40 eV has been measured by using an optimized vacuum-triode setup. The measured graphene transparency equals ∼60% in most of this energy range. Based on these results, nano-patterned sheets of graphene or of related two-dimensional materials are proposed as gate electrodes for ambipolar vacuum devices.

36 MATERIALS SCIENCE↗

Ab initio phonon thermal transport in monolayer InSe, GaSe, GaS, and alloys

We compare vibrational properties and phonon thermal conductivities (κ) of monolayer InSe, GaSe and GaS systems using density functional theory and Peierls-Boltzmann transport methods. In going from InSe to GaSe to GaS, system mass decreases giving both increasing acoustic phonon velocities and decreasing scattering of these heat-carrying modes with optic phonons, ultimately giving κInSe< κGaSe< κGaS. This behavior is demonstrated by correlating the scattering phase space limited by fundamental conservation conditions with mode scattering rates and phonon dispersions for each material. We also show that, unlike flat monolayer systems such as graphene, thermal transport is governed by in-plane vibrations in InSe, GaSe and GaS, similar to buckled monolayer materials such as silicene. Alloying of InSe, GaSe and GaS systems provides an effective method for modulating their κ through intrinsic vibrational modifications and phonon scattering from mass disorder giving reductions ~2-3.5 times. This disorder also suppresses phonon mean free paths in the alloy systems compared to those in their crystalline counterparts. This work provides fundamental insights of lattice thermal transport from basic vibrational properties for an interesting set of two-dimensional materials.

Pandey, Tribhuwan (ORCID:0000000203737716)↗

Beyond the Anderson rule: importance of interfacial dipole and hybridization in van der Waals heterostructures

Vertical stacking of two-dimensional materials with weak van der Waals (vdW) interactions has laid the ground for breakthroughs in physics as well as in technological applications. Although vdW interactions dominate interlayer binding, interlayer electronic coupling may not be negligible and can lead to properties beyond the superposition of constituent monolayers. Here, studying heterobilayers of transition-metal dichalcogenides (MQ 2 ; M = Mo, Ni, Pt; Q = S, Se) by means of density functional theory calculations, we show two mechanisms that influence the band gaps of vdW heterostructures beyond the Anderson rule: (1) interfacial hybridization (mainly involving out-of-plane states, such as chalcogen p z -states), which leads to an upshift in the valence band maxima and accordingly a decrease in the band gap. (2) Formation of an interfacial electric dipole, resulting in an effective gap increase in type-II junctions. While the former is material specific, depending on the proximity of p z -states to each other and the valence band maxima, the latter can be generally described using a model based on the charge density decay outside the monolayers and the pristine band edge positions with respect to the vacuum level, irrespective of junction type.

36 MATERIALS SCIENCE↗

Injection current in ferroelectric group-IV monochalcogenide monolayers

We study the injection current response tensor (also known as circular photogalvanic effect or ballistic current) in ferrolectric monolayer GeS, GeSe, SnS, and SnSe. We find that the injection current is perpendicular to the spontaneous in-plane polarization and could reach peak (bulk) values of the order of 10 10 AV –2 s –1 in the visible spectrum. The magnitude of the injection current is the largest reported in the literature to date for a two dimensional material. To rationalize the large injection current, we correlate the injection current spectrum with the joint density of states, electric polarization, strain, etc. We find that various factors such as anisotropy, in-plane polarization and wave function delocalization are important in determining the injection current tensor in these materials. Here, we also find that compression along the polar axis can increase the injection current (or change its sign), and hence strain can be an effective control knob for their nonlinear optical response. Conversely, the injection current can be a sensitive probe of the crystal structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Alternative Stacking Sequences in Hexagonal Boron Nitride

The relative orientation of successive sheets, i.e. the stacking sequence, in layered two-dimensional materials is central to the electronic, thermal, and mechanical properties of the material. Often different stacking sequences have comparable cohesive energy, leading to alternative stable crystal structures. Here we theoretically and experimentally explore different stacking sequences in the van der Waals bonded material hexagonal boron nitride (h-BN). We examine the total energy, electronic bandgap, and dielectric response tensor for five distinct high symmetry stacking sequences for both bulk and bilayer forms of h-BN. Two sequences, the generally assumed AA' sequence and the relatively unknown (for h-BN) AB (Bernal) sequence, are predicted to have comparably low energy. Lastly, we present a scalable modified chemical vapor deposition method that produces large flakes of virtually pure AB stacked h-BN; this new material complements the generally available AA' stacked h-BN.

36 MATERIALS SCIENCE↗

Methane Partial Oxidation over Multifunctional 2-D Materials

The objective of this research is to design, synthesize, and evaluate highly selective, active, and stable multifunctional catalysts for the low temperature (< 500 Kelvin (K)) partial oxidation of methane to methanol (MTM) with molecular oxygen: CH 4 (g) + $\frac{1}{2}$O 2 (g) → CH 3 OH(g). Methane, the primary component of natural gas, is a source of energy and economic growth as well as an environmental concern. Recent developments in horizontal drilling and enhanced extraction methods have resulted in production of an estimated 62.4 trillion m 3 of ‘stranded’, or uneconomic, natural gas. Uneconomical natural gas is often flared or vented at remote oil production sites. Leaked, flared, and/or vented gas represents a "lost opportunity”, and this research project aims to maximize the value of the resource. Conventional catalysts for MTM suffer from low methanol selectivity since they exhibit ~0.55 eV higher barrier for C-H bond activation of methane compared to methanol. Without breaking these scaling relations, methanol oxidation is orders of magnitude faster than methane oxidation and it is very challenging to envision a process with economically viable single-pass yield. Here, we chose to investigate single-atom catalysts embedded and stabilized in two-dimensional materials such as graphene (GR) and "supported" on Group VIII and IB transition metals such as nickel. The electronic atomic monolayer-metal support interaction (EAMSI) present in these systems could promote methanol selectivity by breaking the scaling relations of the C-H bond activation of methane and methanol. A density functional theory (DFT) based computational study focused on predicting families of GR-based catalysts that could be active and selective for MTM. The catalyst systems predicted by the computational study were synthesized and evaluated for the gas phase MTM under relevant conditions. Unfortunately, the experimental activity and selectivity was lower than computationally predicted. The origin for the discrepancy is likely related to difficulties in synthesizing single atom catalysts in a threecomponent catalyst system at high density and with high selectivity. Future work in our groups is thus focused on reducing the system complexity to a two-component catalyst system. Finally, a techno-economic analysis (TEA) was also conducted to identify critical bottlenecks that inhibit future commercialization.

03 NATURAL GAS↗

Significant Dzyaloshinskii–Moriya interaction at graphene–ferromagnet interfaces due to the Rashba effect

We report that the possibility of utilizing the rich spin-dependent properties of graphene has attracted much attention in the pursuit of spintronics advances. The promise of high-speed and low-energy-consumption devices motivates the search for layered structures that stabilize chiral spin textures such as topologically protected skyrmions. Here we demonstrate that chiral spin textures are induced at graphene/ferromagnetic metal interfaces. Graphene is a weak spin-orbit coupling material and is generally not expected to induce a sufficient Dzyaloshinskii-Moriya interaction to affect magnetic chirality. We demonstrate that indeed graphene does induce a type of Dzyaloshinskii-Moriya interaction due to the Rashba effect. First-principles calculations and experiments using spin-polarized electron microscopy show that this graphene-induced Dzyaloshinskii-Moriya interaction can have a similar magnitude to that at interfaces with heavy metals. Lastly, this work paves a path towards two-dimensional-material-based spin-orbitronics.

36 MATERIALS SCIENCE↗

Nature of Magnetic Excitations in the High-Field Phase of α–RuCl 3

We present comprehensive electron spin resonance (ESR) studies of in-plane oriented single crystals of α–RuCl 3 , a quasi-two-dimensional material with honeycomb structure, focusing on its high-field spin dynamics. The measurements were performed in magnetic fields up to 16 T, applied along the [110] and [100] directions. Several ESR modes were detected. Combining our findings with recent inelastic neutron- and Raman-scattering data, we identified most of the observed excitations. Most importantly, we show that the low-temperature ESR response beyond the boundary of the magnetically ordered region is dominated by single- and two-particle processes with magnons as elementary excitations. In conclusion, the peculiarities of the excitation spectrum in the vicinity of the critical field are discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Enhancing Graphene Plasmonic Device Performance via its Dielectric Environment

Graphene plasmons provide a compelling avenue toward chip-scale dynamic tuning of infrared light. Dynamic tunability emerges through controlled alterations in the optical properties of the system defining graphene’s plasmonic dispersion. Typically, electrostatic induced alterations of the carrier concentration in graphene working in conjunction with mobility have been considered the primary factors dictating plasmonic tunability. We find here that the surrounding dielectric environment also plays a primary role, dictating not just the energy of the graphene plasmon but so too the magnitude of its tuning and spectral width. To arrive at this conclusion, poles in the imaginary component of the reflection coefficient are used to efficiently survey the effect of the surrounding dielectric on the tuning of the graphene plasmon. By investigating several common polar materials, optical phonons (i.e., the Reststrahlen band) of the dielectric substrate are shown to appreciably affect not only the plasmon’s spectral location but its tunability, and its resonance shape as well. In particular, tunability is maximized when the resonances are spectrally distant from the Reststrahlen band, whereas sharp resonances (i.e., high-Q) are achievable at the band’s edge. Overall, these observations both underscore the necessity of viewing the dielectric environment in aggregate when considering the plasmonic response derived from two-dimensional materials and provide heuristics to design dynamically tunable graphene-based infrared devices.

36 MATERIALS SCIENCE↗

Topologically derived dislocation theory for twist and stretch moiré superlattices in bilayer graphene

In this work, we develop a continuum dislocation description of twist and stretch moiré superlattices in two-dimensional material bilayers. The continuum formulation is based on the topological constraints introduced by the periodic dislocation network associated with the moiré structure. The approach is based on solving analytically for the structural distortion and displacement fields that satisfy the topological constraints and that minimize the total energy. The total energy is described by both the strain energy of each individual distorted layer and a Peierls-Nabarro-like interfacial contribution arising from stacking disregistry. The dislocation core emerges naturally within the formalism as a result of the competition between the two contributions. The approach presented here captures the structure and energetics of twist and stretch moiré superlattices of dislocations with arbitrary direction and character, without assuming an analytical solution a priori and while accounting naturally for dislocation-dislocation image interactions. In comparisons to atomistic simulations using classical potentials, the maximum structure deviation is 6%, while the maximum line energy deviation is 0.019 eV/Å. Several applications of our model are shown, including predicting the variation of structure with twist angle and describing dislocation line tension and junction energies.

36 MATERIALS SCIENCE↗

Quantitative relationship between polarization differences and the zone-averaged shift photocurrent

A relationship is derived between differences in electric polarization between bands and the “shift vector” that controls part of a material's bulk photocurrent, then demonstrated in several models. Electric polarization has a quantized gauge ambiguity and is normally observed at surfaces via the surface charge density, while shift current is a bulk property and is described by shift vector gauge invariant at each point in momentum space. They are connected because the same optical transitions that are described in shift currents pick out a relative gauge between valence and conduction bands. We also discuss subtleties arising when there are points at the Brillouin zone where optical transitions are absent. Finally, we conclude that two-dimensional materials with significant interband polarization differences should have high bulk photocurrent, meaning that the modern theory of polarization can be used as a straightforward way to search for bulk photovoltaic material candidates.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Review Article: Advanced nanoscale patterning and material synthesis with gas field helium and neon ion beams

Focused ion beam nanoscale synthesis has emerged as a critical tool for selected area nanofabrication. Helium and neon ion beams from the gas field ion source have recently demonstrated unparalleled resolution among other scanning ion beams. In this review, the authors focus on the nanoscale synthesis applications for these ion species which have been demonstrated to date. The applications and recent work can broadly be grouped into the following categories: (1) Monte Carlo simulations, (2) direct-write milling or sputtering, (3) ion beam lithography, (4) selective ion implantation or defect introduction, and (5) gas-assisted processing. A special emphasis is given toward using He+ and Ne+ for the processing of two dimensional materials, as several groups have demonstrated promising results. Finally, the authors will discuss the future outlook of He+ and Ne+ nanoprocessing techniques and applications.

Stanford, Michael G.↗

Tungsten disulphide based all fiber Q-switching cylindrical-vector beam generation

We proposed and demonstrated an all fiber passively Q-switching laser to generate cylindrical-vector beam, a two dimensional material, tungsten disulphide (WS{sub 2}), was adopted as a saturable absorber inside the laser cavity, while a few-mode fiber Bragg grating was used as a transverse mode-selective output coupler. The repetition rate of the Q-switching output pulses can be varied from 80 kHz to 120 kHz with a shortest duration of 958 ns. Attributed to the high damage threshold and polarization insensitivity of the WS{sub 2} based saturable absorber, the radially polarized beam and azimuthally polarized beam can be easily generated in the Q-switching fiber laser.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Charge Order of Strongly Bounded Electron Pairs on the Triangular Lattice: the Zero-Bandwidth Limit of the Extended Hubbard Model with Strong Onsite Attraction

The inhomogeneous distribution of charged particles is known as charge-order phenomena. Recent experimental studies of (quasi-) two-dimensional materials found different ordered patterns on the triangular lattice. In this work, the preliminary studies of the extended Hubbard model (with the intersite Coulomb density-density repulsion) in the atomic limit on the triangular lattice are presented. The model is investigated within the mean-field approach that treats the onsite term exactly. The finite temperature phase diagrams including metastable phases and some characteristics of the model are determined for the limit of strong onsite attraction. It is shown that in the limit considered all transitions between stable phases are discontinuous (for fixed chemical potential), which is totally different from the model on the alternate lattices. Continuous transitions between metastable phases are also found.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

An Overview of Experiments and Modeling of Polysiloxane-Coated Thermal Protection Systems for Missions to Mars, Titan, and Beyond.

Phenolic Impregnated Carbon Ablator (PICA) gained heritage during the historic Stardust mission, where it successfully returned samples from a comet’s tail and has since been instrumental in delivering payloads to the surface of Mars [1-3]. Most recently, PICA enabled the safe return of samples collected from asteroid Bennu as part of the OSIRIS-REx mission. This rich legacy underscores PICA’s critical role in allowing NASA’s most ambitious exploration missions. However, the friable nature of its phenolic phase presents challenges during handling and pre-launch activities. To mitigate this issue, PICA is coated with a polysiloxane resin system, which serves to suppress particulate dispersion and thereby safeguard spacecraft components. A comprehensive understanding of the polysiloxane resin’s behavior is imperative, as it profoundly shapes the material response of PICA during atmospheric entry by influencing its thermal and oxidative stability. This influence extends to thermocouple plugs embedded within thermal protection systems. These plugs have demonstrated their significance in missions such as Mars Science Laboratory (MSL) and Mars 2020, where the MEDLI and MEDLI2 instrumentation suites delivered in-valuable insights into the performance of thermal protection systems during entry into the Martian atmosphere [4]. Looking ahead, missions such as Dragonfly, set to descend into Titan’s dense atmosphere, aim to leverage advanced sensor technologies to further refine our understanding of thermal protection response [5]. Moreover, thermocouple plugs play an essential role in validating cutting-edge material response models, such as those pioneered under NASA’s Entry Systems Modeling Project (ESM), designed, in-part, to predict the operational integrity of thermal protection systems under the extreme stresses of atmospheric entry. To achieve these modeling goals, ground-based experiments are crucial to provide the foundational data necessary for developing and refining these predictive tools. To this end, an extensive test campaign was conducted at the Hypersonic Materials Environmental Test System (HyMETS) to investigate the high-temperature behavior of the polysiloxane resin in an air environment [6]. These experiments revealed critical phenomena, including the formation of a silicon oxycarbide layer that enhances oxidation resistance, moderates surface temperatures, and alters in-depth thermal response. Building on these findings, subsequent tests were designed to simulate atmospheric entry conditions in reactive gases, such as CO2 and N2, to mimic the environments of Mars and Titan, respectively, as well as non-reactive gases representing the atmospheres of the Ice Giants (Neptune and Uranus). A heating rate dependent decomposition mechanism has been identified for the polysiloxane resin under oxidizing conditions (Fig. 1). In the initial stage, the resin and the underlying thermal protection system undergo pyrolysis, rapidly generating a thin amorphous silicon oxycarbide interwoven with carbonaceous char and residual fibers from PICA. During the second stage, the nascent oxide layer establishes a robust, oxidation-resistant thermal barrier coating, which significantly impedes heat transfer to the underlying carbonaceous char, resulting in a stagnation of the surface temperature. A key factor contributing to this thermal resistance is the low recombination efficiency of atomic oxygen (γ), which further diminishes the heat load on the material’s interior layers [7]. Moreover, as the surface temperature stagnates, the silicon oxycarbide phase separates into distinct regions of silica and free graphite. Ultimately, when the heat flux reaches a critical threshold, a third stage is triggered, leading to the breakdown of the coating through carbothermal reduction, exposing the underlying char layer. This exposure leads to a dramatic surface temperature spike, driven by highly exothermic reactions between atomic oxygen and the char layer, further accelerating material degradation. A detailed mass and heat transfer model of PICA coated with polysiloxane resin was implemented in the Porous material Analysis Toolbox based on OpenFOAM, PATO [8]. The initial stage was considered negligible in this model because the resin decomposition occurs rapidly within a thin surface layer. Instead, the coating was directly considered as an oxygen-resistant thermal barrier coating. For the second stage, the thin amorphous silicon oxycarbide was treated as a pure silica surface to simplify the thermochemical behavior. The model ac-counts for surface equilibrium processes using representative elements of the coating-environment system. For the third stage, specific boundary conditions were developed to estimate the onset and progression of the coating removal. Two-dimensional material response simulations were conducted to compare uncoated and coated PICA using boundary conditions calibrated with HyMETS data. Fig. 2 illustrates that the simulations closely align with experimental data, successfully reproducing measured temperature profiles. This work will include the latest advancements in the coating model, including the calibration of recombination of atomic oxygen at the surface during the second phase. These simulated results will be further validated against additional CO2 data points from HyMETS, reinforcing the models’ predictive capabilities. These mechanisms and their effects on thermal protection systems, including thermochemical behavior and thermocouple probe performance in extreme environments, provide crucial insights for optimizing spacecraft designs that safeguard scientific payload and ensure mission success in future planetary exploration endeavors.

Active Oxidation↗

Synthesis of Mo 4 VAlC 4 MAX Phase and Two-Dimensional Mo 4 VC 4 MXene with Five Atomic Layers of Transition Metals

MXenes are a family of two-dimensional (2D) transition metal carbides, nitrides, and carbonitrides with a general formula of M n+1 X n T x , in which two, three, or four atomic layers of a transition metal (M: Ti, Nb, V, Cr, Mo, Ta, etc.) are interleaved with layers of C and/or N (shown as X), and T x represents surface termination groups such as –OH, =O, and –F. Here, we report the scalable synthesis and characterization of a MXene with five atomic layers of transition metals (Mo 4 VC 4 T x ), by synthesizing its Mo 4 VAlC 4 MAX phase precursor that contains no other MAX phase impurities. These phases display twinning at their central M layers which is not present in any other known MAX phases or MXenes. Transmission electron microscopy and X-ray diffraction were used to examine the structure of both phases. Energy-dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy, Raman spectroscopy, and high-resolution scanning transmission electron microscopy with energy-dispersive X-ray spectroscopy were used to study the composition of these materials. Density functional theory calculations indicate that other five transition metal-layer MAX phases (M' 4 M"AlC 4 ) may be possible, where M' and M" are two different transition metals. The predicted existence of additional Al-containing MAX phases suggests that more M 5 C 4 T x MXenes can be synthesized. Additionally, we characterized the optical, electronic, and thermal properties of Mo 4 VC 4 T x . Here, this study demonstrates the existence of an additional subfamily of M 5 X 4 T x MXenes as well as a twinned structure, allowing for a wider range of 2D structures and compositions for more control over properties, which could lead to many different applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Mixed matrix membranes for post-combustion carbon capture: From materials design to membrane engineering

Mixed matrix materials (MMMs) containing nanofillers dispersed in continuous polymer matrices have emerged as an exciting and versatile platform to develop membranes with superior CO 2 /N 2 separation performance for post-combustion carbon capture. Both polymers and nanofillers can be vertically designed and engineered to combine the advantages of excellent processability (derived from polymers) and strong size-sieving ability or/and significant permanent porosity (originated from nanofillers). However, the MMMs face major challenges, such as interfacial incompatibility, particle agglomeration, and poor thin-film formability. This report provides a comprehensive yet critical review of various polymers and nanofillers (such as metal-organic frameworks, covalent organic frameworks, and two-dimensional materials) with promising CO 2 /N 2 separation properties. We exhaustively describe strategies to improve interfacial compatibility, such as in situ syntheses of polymers and nanofillers and functionalization of both components to improve adhesion. Moreover, we highlight various approaches to engineer the MMMs into thin-film composite (TFC) membranes. The review reveals the structure/property relationship in these MMMs and outlines the challenges and opportunities to realize their potential for practical applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

AC/AB Stacking Boundaries in Bilayer Graphene

Boundaries, including phase boundaries, grain boundaries, and domain boundaries, are known to have an important influence on material properties. Here, dark-field (DF) transmission electron microscopy (TEM) and scanning transmission electron microscopy (STEM) imaging are combined to provide a full view of boundaries between AB and AC stacking domains in bilayer graphene across length scales from discrete atoms to the macroscopic continuum. Combining the images with results obtained by density functional theory (DFT) and classical molecular dynamics calculations, we demonstrate that the AB/AC stacking boundaries in bilayer graphene are nanometer-wide strained channels, mostly in the form of ripples, producing smooth low-energy transitions between the two different stackings. Our results provide a new understanding of the novel stacking boundaries in bilayer graphene, which may be applied to other layered two-dimensional materials as well.

Lin, Junhao↗