Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “turbulence optimization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
NASA NTRS1993

Transient development of perturbations in stratified shear flow

Transient development of perturbations in inviscid stratified shear flow is investigated. Use is made of closed form analytic solutions that allow concise identification of optimally growing plane-wave solutions for the case of an unbounded flow with constant shear and stratification. For the case of channel flow, variational techniques are employed to determine the optimally growing disturbances. The maximum energy growth attained over a specific time interval decreases continuously with increasing stratification, and no special significance attaches to Ri = 0.25. Indeed, transient growth can be substantial even for Ri = O(1). A general lower bound on the energy growth attained by an optimal perturbation in a stratified flow over a given time interval is the square root of the growth attained by the corresponding perturbation in unstratified flow. Enhanced perturbation persistence is found for mean-flow stratification lying in the range Ri between 0.1 and 0.3. Small but finite perturbations in mean flow with Ri less than 0.4 produce regions with locally negative total density gradient, which are expected to overturn. Although the perturbations are of wave form, buoyancy fluxes mediate transfer between perturbation kinetic and potential energy during transient development, thus implying that buoyancy flux is not a determinative diagnostic for distinguishing between waves and turbulence in stratified flows.

Farrell, Brian F.↗
NASA NTRS1994

Skin friction measurement in complex flows using thin oil film techniques

The NASA Grant NAG2-261 was initiated to support a program of research to study complex flows that occur in flight and laboratory experiments by building, testing and optimizing an on-board technique for direct measurement of surface shear stress using thin oil film techniques. The program of research has proceeded under the supervision of the NASA Ames Research Center and with further cooperation from the NASA Ames-Dryden and NASA Langley Research Centers. In accordance with the original statement of work, the following research milestones were accomplished: (1) design and testing of an internally mounted one-directional skin friction meter to demonstrate the feasibility of the concept; (2) design and construction of a compact instrument capable of measuring skin friction in two directions; (3) study of transitional and fully turbulent boundary layers over a flat plate with and without longitudinal pressure gradients utilizing the compact two-directional skin friction meter; (4) study of the interaction between a turbulent boundary layer and a shock wave generated by a compression corner using the two-directional meter; and (5) flight qualification of the compact meter and accompanying electronic and pneumatic systems, preliminary installation into flight test fixture.

Source record↗
NASA NTRS1993

CFD Analysis of Spray Combustion and Radiation in OMV Thrust Chamber

The Variable Thrust Engine (VTE), developed by TRW, for the Orbit Maneuvering Vehicle (OMV) uses a hypergolic propellant combination of Monomethyl Hydrazine (MMH) and Nitrogen Tetroxide (NTO) as fuel and oxidizer, respectively. The propellants are pressure fed into the combustion chamber through a single pintle injection element. The performance of this engine is dependent on the pintle geometry and a number of complex physical phenomena and their mutual interactions. The most important among these are (1) atomization of the liquid jets into fine droplets; (2) the motion of these droplets in the gas field; (3) vaporization of the droplets (4) turbulent mixing of the fuel and oxidizer; and (5) hypergolic reaction between MMH and NTO. Each of the above phenomena by itself poses a considerable challenge to the technical community. In a reactive flow field of the kind occurring inside the VTE, the mutual interactions between these physical processes tend to further complicate the analysis. The objective of this work is to develop a comprehensive mathematical modeling methodology to analyze the flow field within the VTE. Using this model, the effect of flow parameters on various physical processes such as atomization, spray dynamics, combustion, and radiation is studied. This information can then be used to optimize design parameters and thus improve the performance of the engine. The REFLEQS CFD Code is used for solving the fluid dynamic equations. The spray dynamics is modeled using the Eulerian-Lagrangian approach. The discrete ordinate method with 12 ordinate directions is used to predict the radiative heat transfer in the OMV combustion chamber, nozzle, and the heat shield. The hypergolic reaction between MMH and NTO is predicted using an equilibrium chemistry model with 13 species. The results indicate that mixing and combustion is very sensitive to the droplet size. Smaller droplets evaporate faster than bigger droplets, leading to a well mixed zone in the combustion chamber. The radiative heat flux at combustion chamber and nozzle walls are an order of negligible less than the conductive heat flux. Simulations performed with the heat shield show that a negligible amount of fluid is entrained into the heat shield region. However, the heat shield is shown to be effective in protecting the OMV structure surrounding the engine from the radiated heat.

Giridharan, M. G.↗
NASA NTRS1999

Current and Future Plans of the NASA Data Assimilation Office (DAO)

The mission of the Data Assimilation Office (DAO) is to advance the state of the art of data assimilation and produce research-quality assimilated data sets which make optimal use of space-based observations. Development efforts over the last few years have focused on delivering a production data assimilation system in support of NASA's Terra platform. That system, called the Goddard Earth Observing System - version 2 or GEOS-2, represents a major upgrade to the baseline GEOS-1 system employed in NASA's first reanalysis effort. GEOS-2 includes a physical-space three dimensional variational analysis algorithm (the Physical-space Statistical Analysis System or PSAS) and numerous improvements to the general circulation model. The latter include a Soil-Vegetation-Atmosphere Transfer (SVAT) land surface scheme, a level 2.5 moist turbulence scheme and new Short Wave (SW) and Long Wave (LW) radiation code. The system also includes an off-line ozone assimilation system, and the capability to assimilate scatterometer surface winds, and TIROS Operational Vertical Sounder (TOVS) and Special Sensor Microwave Imager (SSM/I) moisture data. GEOS-2 is currently run at 1 degree horizontal resolution and 48 levels extending to O.Olmb. Experimental versions of GEOS-2 are run with a global stretched grid allowing enhanced (e.g. 1/4 deg) regional resolution. Other capabilities being developed include, the assimilation of Tropical Rainfall Measuring Mission (TRMM) precipitation and Global Positioning System (GPS) data, an off-line land surface assimilation system, and a retrospective analysis scheme. The DAO is also engaged in a number of collaborative efforts to help accelerate the development of the next generation data assimilation system. These include, a joint modeling effort between the DAO and NCAR/CGDD to develop a new Global Circulation Model (GCM), and a Department of Energy Lawrence Livermore National Laboratory (DOE/LLNL) collaboration on model parallelization. Plans for the next reanalysis will be discussed in the context of current and near term system quality and computing capabilities, and the need for multiple reanalysis products.

Atlas, Robert↗
NASA NTRSDate not supplied

Evaluation of CFD Predictions of CobraMRV Control Surface Effectiveness at the NASA Langley Unitary Plan Wind Tunnel

The ability of CFD simulations to serve as a surrogate for wind tunnel testing at high supersonic speeds has been evaluated for a sub-scale model of the Co-Optimization Blunt-body Re-entry Analysis-Mid-lift-to-drag Rigid Vehicle (CobraMRV) human Mars entry vehicle concept. The vehicle was tested at the Unitary Plan Wind Tunnel (UPWT) at the NASA Langley Research Center under flow conditions and surface control configurations relevant to the entry stage of a flight mission. The CFD simulations were performed prior to gaining access to test results in order to assess how blind predictions obtained using best practices compare to experiments. Solutions of empty tunnel simulations were used as inflow boundary condition for the CobraMRV simulations in a truncated portion of the test section. Different solvers and turbulence models were used by separate teams to assess sensitivity to numerical methods, physics, and users. After release of the test results, the pre-test computations were compared to the experimental results, and additional analyses have been conducted to explain observed discrepancies. The amount of time and resources dedicated to each phase of the computational work was logged for comparison to that required for wind tunnel tests, and to inform planning of future CFD data base development projects.

ARMD↗
NASA NTRSDate not supplied

OVERFLOW Analysis of Supersonic Retropropulsion Testing on a Blunt Mars Entry Vehicle Concept

Supersonic retropropulsion (SRP) flow over a Hypersonic Inflatable Aerodynamic Decelerator (HIAD) blunt-body vehicle was simulated using the Overflow Computational Fluid Dynamics (CFD) solver. Two nozzle configurations were tested (1E and 1F) as a subset of the seven total configurations in the Descent System Study (DSS) testing campaign. A generalized, Adaptive Mesh Refinement (AMR) shock capturing and plume refinement technique was developed and calibrated for producing automatic and unique grid systems optimized for any given testing condition. Solution independence from grid resolution was determined by successively increasing grid refinement until asymptotic convergence of the mean aerodynamic loads was observed. Overflow Reynolds-averaged Navier-Stokes (RANS) solutions produced realistic SRP flow phenomena, including Mach disk normal shocks contained in high-thrust plumes and bow shock triple-points. Solutions for the 1E nozzle configuration were steady. Conversely, a subset of the 1F test conditions were unsteady and exhibited periodic, non-sinusoidal expansions and contractions of the streamwise-oriented plume, resulting in unsteady aerodynamic loads on the vehicle. Initial investigations into the effect of turbulence modeling fidelity demonstrated significant differences between the aerodynamic loads simulated with RANS and Detached Eddy Simulation (DES). Multiple flow mechanisms were identified as root causes of these differences, including bow shock shape augmentation and reduced entrainment due to reduced turbulence in the DES simulations. Initial comparisons of pitching moment control authority and aerodynamic drag performance between the tested nozzle configurations demonstrated that the 1E configuration may be more advantageous for the Mars Entry, Descent, and Landing (EDL) task.

Supersonic Retropropulsion↗
NASA NTRSDate not supplied

OVERFLOW Analysis of Supersonic Retropropulsion Testing on a Blunt Mars Entry Vehicle Concept

Supersonic retropropulsion (SRP) flow over a Hypersonic Inflatable Aerodynamic Decelerator (HIAD) blunt-body vehicle was simulated using the Overflow Computational Fluid Dynamics (CFD) solver. Two nozzle configurations were tested (1E and 1F) as a subset of the seven total configurations in the Descent System Study (DSS) testing campaign. A generalized, Adaptive Mesh Refinement (AMR) shock capturing and plume refinement technique was developed and calibrated for producing automatic and unique grid systems optimized for any given testing condition. Solution independence from grid resolution was determined by successively increasing grid refinement until asymptotic convergence of the mean aerodynamic loads was observed. Overflow Reynolds-averaged Navier-Stokes (RANS) solutions produced realistic SRP flow phenomena, including Mach disk normal shocks contained in high-thrust plumes and bow shock triple-points. Solutions for the 1E nozzle configuration were steady. Conversely, a subset of the 1F test conditions were unsteady and exhibited periodic, non-sinusoidal expansions and contractions of the streamwise-oriented plume, resulting in unsteady aerodynamic loads on the vehicle. Initial investigations into the effect of turbulence modeling fidelity demonstrated significant differences between the aerodynamic loads simulated with RANS and Detached Eddy Simulation (DES). Multiple flow mechanisms were identified as root causes of these differences, including bow shock shape augmentation and reduced entrainment due to reduced turbulence in the DES simulations. Initial comparisons of pitching moment control authority and aerodynamic drag performance between the tested nozzle configurations demonstrated that the 1E configuration may be more advantageous for the Mars Entry, Descent, and Landing (EDL) task.

Supersonic Retropropulsion↗
NASA NTRS1982

Stability of boundary layers with porous suction strips: Experiment and theory

Low turbulence tunnel experiments on the stability and transition of 2 D boundary layers on flat plates with and without suction are described. A number of general suction cases are discussed. Test results showed that the maximum stabilization occurred when the suction was moved toward the Branch I neutral point. An analytical study of the stability of two dimensional, incompressible boundary layer flows over plates with suction through porous strips was performed. The mean flow was calculated using linearized triple deck, closed form solutions. The stability results of the triple deck theory are shown to be in good agreement with those of the interacting boundary layers. An analytical optimization scheme for the suction configuration was developd. Numerical calculations were performed corresponding to the experimental configurations. In each case, the theory correctly predicts the experimental results.

Reynolds, G. A.↗
NASA NTRS2024

Intrastep, Stage-Value Predictors for Diagonally-Implicit Runge-Kutta Methods

To better identify the necessary attributes of good stage-value predictors (SVPs), numerous SVPs are designed for an existing: ESDIRK4(3)7L[2]SA [26] and a new: ESDIRK4(3)8L[2]SA scheme.1 Both are stifflyaccurate, stage-order two, explicit, singly-diagonally implicit Runge–Kutta (ESDIRK) schemes. Tradeoffs are studied in the parameter spaces enforcing the constraints on accuracy, linear stability, nonlinear stability and coefficient size to determine which objectives correlate with effective predictors. The SVPs are tested on three challenging external aerodynamics problems [107 − 108 degrees of freedom (DoFs)], each with a different level of stiffness. The problems include two 3D airfoils simulations and one canonical turbulence simulation. All simulations use the compressible Navier-Stokes equations (CNSE). An entropy stable spectral collocation formulation is used for discretizing the spatial terms in the equations. Simulations are performed at a wide variety of temporal error tolerances. Problems that are sufficiently stiff (e.g., lax temporal error tolerances) benefit from SVPs designed with second-order accuracy and stability properties: A-stability, and L-stability, rather than high accuracy constraints. Simulations with modest stiffness (e.g., strict error tolerances) are better suited for SVPs designed using high accuracy constraints. Designing SVPs with enhanced stability properties is tedious but worthwhile. Simulation times are reduced with optimal SVPs by as much as 100% on some stages, with combined stepwise improvements of between 50 − 100% for both methods. A comparative study is performed with the two aforementioned methods as well as four other ESDIRKs. The newly designed ESDIRK4(3)8L[2]SA with γ ≈ 1/10, proves to be the most efficient of the six tested ESDIRK schemes simulating the CNSE.

Diagonally-Implicit Runge-Kutta↗
NASA NTRS2014

Direct Numerical Simulations of High-Speed Turbulent Boundary Layers over Riblets

Direct numerical simulations (DNS) of spatially developing turbulent boundary layers over riblets with a broad range of riblet spacings are conducted to investigate the effects of riblets on skin friction at high speeds. Zero-pressure gradient boundary layers under two flow conditions (Mach 2:5 with T(sub w)/T(sub r) = 1 and Mach 7:2 with T(sub w)/T(sub r) = 0:5) are considered. The DNS results show that the drag-reduction curve (delta C(sub f)/C(sub f) vs l(sup +)(sub g )) at both supersonic speeds follows the trend of low-speed data and consists of a `viscous' regime for small riblet size, a `breakdown' regime with optimal drag reduction, and a `drag-increasing' regime for larger riblet sizes. At l l(sup +)(sub g) approx. 10 (corresponding to s+ approx 20 for the current triangular riblets), drag reduction of approximately 7% is achieved at both Mach numbers, and con rms the observations of the few existing experiments under supersonic conditions. The Mach- number dependence of the drag-reduction curve occurs for riblet sizes that are larger than the optimal size, with smaller slopes of (delta C(sub f)/C(sub f) for larger freestream Mach numbers. The Reynolds analogy holds with 2(C(sub h)=C(sub f) approximately equal to that of at plates for both drag-reducing and drag-increasing configurations.

Duan, Lian↗
NASA NTRS1985

A review of some approximate methods used in aerodynamic heating analyses

It is pointed out that preliminary design and optimization studies for new aerospace vehicles require techniques which can calculate aerodynamic heating rates accurately and efficiently. The method employed to calculate the flow field depends to a large extent on the shape of the vehicle, Mach number, Reynolds number, and Knudsen number. In the case of the aero-assisted orbital transfer vehicle (AOTV), a substantial portion of the flight will be in the transitional regime between continuum and free molecule flow. The present paper discusses some approximate methods which have been used to calculate heating rates on high-speed vehicles. Attention is given to the stagnation point and leading edges, the downstream region, the axisymmetric analog, laminar and turbulent heating rates, transition heating rates, gas models, and three-dimensional applications.

Dejarnette, F. R.↗
NASA NTRS2001

Multiple Mode Actuation of a Turbulent Jet

The effects of multiple mode periodic excitation on the evolution of a circular turbulent jet were studied experimentally. A short, wide-angle diffuser was attached to the jet exit. Streamwise and cross-stream excitations were introduced at the junction between the jet exit and the diffuser inlet on opposing sides of the jet. The introduction of high amplitude, periodic excitation in the streamwise direction enhances the mixing and promotes attachment of the jet shear-layer to the diffuser wall. Cross-stream excitation applied over a fraction of the jet circumference can deflect the jet away from the excitation slot. The two modes of excitation were combined using identical frequencies and varying the relative phase between the two actuators in search of an optimal response. It is shown that, for low and moderate periodic momentum input levels, the jet deflection angles depend strongly on the relative phase between the two actuators. Optimum performance is achieved when the phase difference is pi +/- pi/6. The lower effectiveness of the equal phase excitation is attributed to the generation of an azimuthally symmetric mode that does not produce the required non-axisymmetric vectoring. For high excitation levels, identical phase becomes more effective, while phase sensitivity decreases. An important finding was that with proper phase tuning, two unsteady actuators can be combined to obtain a non-linear response greater than the superposition of the individual effects.

Pack, LaTunia G.↗
NASA NTRS2001

Multiple Mode Actuation of a Turbulent Jet

The effects of multiple mode periodic excitation on the evolution of a circular turbulent jet were studied experimentally. A short, wide-angle diffuser was attached to the jet exit. Streamwise and cross-stream excitations were introduced at the junction between the jet exit and the diffuser inlet on opposing sides of the jet. The introduction of high amplitude, periodic excitation in the streamwise direction enhances the mixing and promotes attachment of the jet shear-layer to the diffuser wall. Cross-stream excitation applied over a fraction of the jet circumference can deflect the jet away from the excitation slot. The two modes of excitation were combined using identical frequencies and varying the relative phase between the two actuators in search of an optimal response. It is shown that, for low and moderate periodic momentum input levels, the jet deflection angles depend strongly on the relative phase between the two actuators. Optimum performance is achieved when the phase difference is pi +/- pi/6. The lower effectiveness of the equal phase excitation is attributed to the generation of an azimuthally symmetric mode that does not produce the required non-axisymmetric vectoring. For high excitation levels, identical phase becomes more effective, while phase sensitivity decreases. An important finding was that with proper phase tuning, two unsteady actuators can be combined to obtain a non-linear response greater than the superposition of the individual effects.

Pack, LaTunia G.↗
NASA NTRS2021

Truncated ARQ Statistical Link Analysis for Dynamic Links

The future deep space links are migrating towards higher frequency bands such as Ka band and optical. These links are susceptible to non Gaussian and non linear effects such as atmospheric turbulence, scintillation, antenna mis-pointing, jitter, etc. These dynamic links thus will experience various degrees of fading loss, and some of these link disruptions cannot be effectively mitigated by forward error correction coding and/or interleaving. One effective way to ensure reliable communication is by using Automatic Repeat Request (ARQ) protocol, where the receiver acknowledges to the transmitter whether or not a data unit is successfully received. If a data unit is not successfully received (such as after a pre-set time-out), the transmitter would then re-transmit the lost data unit to the receiver. In a previous paper, we derived a statistical link analysis method of finding the optimal operating Signal-to-Noise Ratio (SNR) and estimating the latency of an ARQ scheme. In a more recent paper, we demonstrated the above method using the SNR distribution constructed from the Ka-band (32 GHz) flight data. To simplify the discussion, we considered the academic approach that the ARQ scheme allows for an infinite number of retransmissions. In this paper, we consider the more practical case of a truncated ARQ scheme, where there is a limit on the number of retransmissions. We derive the error probability, the optimal SNR setting, and the latency statistics of the correctly received frames of the truncated ARQ schemes. We first discuss the truncated ARQ link analysis principles using the Gaussian assumption for SNR distribution with a large variance. Next, we demonstrate the statistical truncated ARQ link analysis using the SNR distribution constructed from the Ka-band flight data. The results in this paper can be applied in the design of reliable communication systems such as the Consultative Committee for Space Data System (CCSDS) File Transfer Protocol (CFTP) and the Delay Tolerant Network (DTN).

Morabito, David↗
NASA NTRS2012

Global Estimates of PBL Depth from Space-Borne LIDAR

The planetary boundary layer (PBL) is responsible for communicating the exchange of energy, moisture, momentum, pollutants, and aerosols between the surface and the free atmosphere and is therefore crucial to many studies of the atmosphere. Unfortunately, there have historically been few observations of this important layer due to the complexity involved in its measurement. However, with the advent of more advanced satellites, global measurements of the PBL are now becoming possible. The PBL is often characterized by a high concentration of aerosols within the layer and low level clouds capping it and these are observable from space. The Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observations (CALIPSO) satellite was launched in 2006 with the intention of observing aerosols and clouds and was the first space-based LIDAR optimized for this purpose. CALIPSO observations are therefore well suited to observing the depth of the PBL. Since it was launched, CALIPSO has been making nearly continuous measurements enabling a global picture of PBL depth. We plan to present a global PBL depth product and how it evolves throughout the year. The product is able to identify deeper PBL depths in the summer hemisphere over land and deeper depths along the northern hemisphere oceanic storm tracks in winter associated with cold air traveling over warm water. Large seasonal cycles are also evident in the subtropical desert locations among other features. In addition, comparisons will be made between several estimates of PBL depth based on turbulent intensity, meteorology profiles, and aerosol profiles from the GEOS5 model.

McGrath-Spangler, Erica lynn↗
NASA NTRS2003

The Results of a Simulator Study to Determine the Effects on Pilot Performance of Two Different Motion Cueing Algorithms and Various Delays, Compensated and Uncompensated

A study was conducted employing the Visual Motion Simulator (VMS) at the NASA Langley Research Center, Hampton, Virginia. This study compared two motion cueing algorithms, the NASA adaptive algorithm and a new optimal control based algorithm. Also, the study included the effects of transport delays and the compensation thereof. The delay compensation algorithm employed is one developed by Richard McFarland at NASA Ames Research Center. This paper reports on the analyses of the results of analyzing the experimental data collected from preliminary simulation tests. This series of tests was conducted to evaluate the protocols and the methodology of data analysis in preparation for more comprehensive tests which will be conducted during the spring of 2003. Therefore only three pilots were used. Nevertheless some useful results were obtained. The experimental conditions involved three maneuvers; a straight-in approach with a rotating wind vector, an offset approach with turbulence and gust, and a takeoff with and without an engine failure shortly after liftoff. For each of the maneuvers the two motion conditions were combined with four delay conditions (0, 50, 100 & 200ms), with and without compensation.

Guo, Li-Wen↗
NASA NTRS2016

Computational Study of Flow Interactions in Coaxial Rotors

Although the first idea of coaxial rotors appeared more than 150 years ago, most helicopters have used single main-rotor/tail-rotor combination. Since reactive moments of coaxial rotors are canceled by contra-rotation, no tail rotor is required to counter the torque generated by the main rotor. Unlike the single main rotor design that distributes power to both main and tail rotors, all of the power for coaxial rotors is used for vertical thrust. Thus, no power is wasted for anti-torque or directional control. The saved power helps coaxial rotors reach a higher hover ceiling than single rotor helicopters. Another advantage of coaxial rotors is that the overall rotor diameter can be reduced for a given vehicle gross weight because each rotor provides a maximum contribution to vertical thrust to overcome vehicle weight. However, increased mechanical complexity of the hub has been one of the challenges for manufacturing coaxial rotorcraft. Only the Kamov Design Bureau of Russia had been notably successful in production of coaxial helicopters until Sikorsky built X2, an experimental compound helicopter. Recent developments in unmanned aircraft systems and high-speed rotorcraft have renewed interest in the coaxial configuration. Multi-rotors are frequently used for small electric unmanned rotorcraft partly due to mechanical simplicity. The use of multiple motors provides redundancy as well as cost-efficiency. The multi-rotor concept has rarely been used until recently because of its inherent stability and control problems. However, advances in inexpensive electronic flight control systems have opened the floodgates for small drones using multirotors. Coaxial rotors have started to appear in some multi-rotor configurations. Small coaxial rotors have often been designed using a hundred year old approach that is "sketch, build, fly, and iterate." In that approach, there is no systematic way to explore trade-offs or determine logical next steps. It is neither possible to account for multiple real-world constraints up front in design nor possible to know what performance is possible with a given design. Since unmanned vehicles are sized and optimized for the particular mission, a modern low-fidelity conceptual design and sizing tool that has been used for the design of large helicopters can be used for design of small coaxial rotorcraft. However, unlike most helicopters with single main rotor, the interactions between the upper and lower rotors emerge as an important factor to consider in design because an increase in performance of a multi-rotor system is not proportional to the number of rotors. Interference losses and differences in thrusts between the upper and lower rotors were investigated by theoretical methods as well as a computational fluid dynamics (CFD) method using the Reynolds-Averaged Navier-Stokes (RANS) equations. In this work, hybrid turbulence models are used to investigate the physics of interactions between coaxial rotors and a fuselage that are not well understood. Present study covers not only small-scale drones but also large-scale coaxial rotors for heavy-lifting missions. Considering the recently proposed FAA drone rules that require the flight only in visual line-of-sight, a large multirotor might be used as an airborne carrier for launch and recovery of unmanned aircraft systems with a human operator onboard. For applications to civil operations, their aerodynamic performance and noise levels need to be assessed. Noise is one of the largest limiting factors to rotorcraft operations in urban area. Since the high-frequency noise of multi-rotors may increase the annoyance, noise may turn out to be a key issue that must be addressed for market acceptability. One of the objectives of the present work is to study the effects of inter-rotor spacing and collectives on the performance, efficiency, and acoustics of coaxial rotor systems.

Study↗
NASA NTRS1990

Performance analysis of a noncoherently combined large aperture optical heterodyne receiver

The performance of a noncoherently combined (NC) multiple-mirror heterodyne receiver is analyzed. With no atmospheric turbulence (AT), the performance of the NC receiver is shown to the inferior to that of a monolithic diffraction-limited receiver with equivalent aperture area. When AT is taken into consideration, however, the efficiency of a monolithic receiver is limited by the phase coherence length of the atmosphere, and generally does not improve with increasing aperture size. In contrast, the performance of an NC system improves with an increasing number of receivers. Consequently, given a fixed collecting area, the NC system can offer superior performance. The performance of the NC heterodyne receiver is studied by analyzing the combining loss of the receiver SNR. It is shown that, given a constant collecting area, the performance of the NC receiver is optimized when the diameter of each of the individual receivers is on the order of the phase coherence length of the AT.

Chen, Chien-Chung↗