Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “transformations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

Challenges at the Frontiers of Matter and Energy: Transformative Opportunities for Discovery Science

FIVE TRANSFORMATIVE OPPORTUNITIES FOR DISCOVERY SCIENCE As a result of this effort, it has become clear that the progress made to date on the five Grand Challenges has created a springboard for seizing five new Transformative Opportunities that have the potential to further transform key technologies involving matter and energy. These five new Transformative Opportunities and the evidence supporting them are discussed in this new report, “Challenges at the Frontiers of Matter and Energy: Transformative Opportunities for Discovery Science.” Mastering Hierarchical Architectures and Beyond-Equilibrium Matter Complex materials and chemical processes transmute matter and energy, for example from CO2 and water to chemical fuel in photosynthesis, from visible light to electricity in solar cells and from electricity to light in light emitting diodes (LEDs) Such functionality requires complex assemblies of heterogeneous materials in hierarchical architectures that display time-dependent away-from-equilibrium behaviors. Much of the foundation of our understanding of such transformations however, is based on monolithic single- phase materials operating at or near thermodynamic equilibrium. The emergent functionalities enabling next-generation disruptive energy technologies require mastering the design, synthesis, and control of complex hierarchical materials employing dynamic far-from-equilibrium behavior. A key guide in this pursuit is nature, for biological systems prove the power of hierarchical assembly and far- from-equilibrium behavior. The challenges here are many: a description of the functionality of hierarchical assemblies in terms of their constituent parts, a blueprint of atomic and molecular positions for each constituent part, and a synthesis strategy for (a) placing the atoms and molecules in the proper positions for the component parts and (b) arranging the component parts into the required hierarchical structure. Targeted functionality will open the door to significant advances in the harvesting, transforming (e.g., reducing CO2, splitting water, and fixing nitrogen), storing, and use of energy to create new materials, manufacturing processes, and technologies—the lifeblood of human societies and economic growth. Beyond Ideal Materials and Systems: Understanding the Critical Roles of Heterogeneity, Interfaces, and Disorder Real materials, both natural ones and those we engineer, are usually a complex mixture of compositional and structural heterogeneities, interfaces, and disorder across all spatial and temporal scales. It is the fluctuations and disorderly states of these heterogeneities and interfaces that often determine the system’s properties and functionality. Much of our fundamental scientific knowledge is based on “ideal” systems, meaning materials that are observed in “frozen” states or represented by spatially or temporally averaged states. Too often, this approach has yielded overly simplistic models that hide important nuances and do not capture the complex behaviors of materials under realistic conditions. These behaviors drive vital chemical transformations such as catalysis, which initiates most industrial manufacturing processes, and friction and corrosion, the parasitic effects of which cost the U.S. economy billions of dollars annually. Expanding our scientific knowledge from the relative simplicity of ideal, perfectly ordered, or structurally averaged materials to the true complexity of real-world heterogeneities, interfaces, and disorder should enable us to realize enormous benefits in the materials and chemical sciences, which translates to the energy sciences, including solar and nuclear power, hydraulic fracturing, power conversion, airframes, and batteries. Harnessing Coherence in Light and Matter Quantum coherence in light and matter is a measure of the extent to which a wave field vibrates in unison with itself at neighboring points in space and time. Although this phenomenon is expressed at the atomic and electronic scales, it can dominate the macroscopic properties of materials and chemical reactions such as superconductivity and efficient photosynthesis. In recent years, enormous progress has been made in recognizing, manipulating, and exploiting quantum coherence. This progress has already elucidated the role that symmetry plays in protecting coherence in key materials, taught us how to use light to manipulate atoms and molecules, and provided us with increasingly sophisticated techniques for controlling and probing the charges and spins of quantum coherent systems. With the arrival of new sources of coherent light and electron beams, thanks in large part to investments by the U.S. Department of Energy’s Office of Basic Energy Sciences (BES), there is now an opportunity to engineer coherence in heterostructures that incorporate multiple types of materials and to control complex, multistep chemical transformations. This approach will pave the way for quantum information processing and next-generation photovoltaic cells and sensors. Revolutionary Advances in Models, Mathematics, Algorithms, Data, and Computing Science today is benefiting from a convergence of theoretical, mathematical, computational, and experimental capabilities that put us on the brink of greatly accelerating our ability to predict, synthesize, and control new materials and chemical processes, and to understand the complexities of matter across a range of scales. Imagine being able to chart a path through a vast sea of possible new materials to find a select few with desired properties. Instead of the time-honored forward approach, in which materials with desired properties are found through either trial-and-error experiments or lucky accidents, we have the opportunity to inversely design and create new materials that possess the properties we desire. The traditional approach has allowed us to make only a tiny fraction of all the materials that are theoretically possible. The inverse design approach, through the harmonious convergence of theoretical, mathematical, computational, and experimental capabilities, could usher in a virtual cornucopia of new materials with functionalities far beyond what nature can provide. Similarly, enhanced mathematical and computational capabilities significantly enhance our ability to extract physical and chemical insights from vastly larger data streams gathered during multimodal and multidimensional experiments using advanced characterization facilities. Exploiting Transformative Advances in Imaging Capabilities across Multiple Scales Historically, improvements in imaging capabilities have always resulted in improved understanding of scientific phenomena. A prime challenge today is finding ways to reconstruct raw data, obtained by probing and mapping matter across multiple scales, into analyzable images. BES investments in new and improved imaging facilities, most notably synchrotron x-ray sources, free-electron lasers, electron microscopes, and neutron sources, have greatly advanced our powers of observation, as have substantial improvements in laboratory- scale technologies. Furthermore, BES is now planning or actively discussing exciting new capabilities. Taken together, these advances in imaging capabilities provide an opportunity to expand our ability to observe and study matter from the 3D spatial perspectives of today to true “4D” spatially and temporally resolved maps of dynamics that allow quantitative predictions of time-dependent material properties and chemical processes. The knowledge gained will impact data storage, catalyst design, drug delivery, structural materials, and medical implants, to name just a few key technologies. ENABLING SUCCESS Seizing each of these five Transformative Opportunities, as well as accelerating further progress on Grand Challenge research, will require specific, targeted investments from BES in the areas of synthesis, meaning the ability to make the materials and architectures that are envisioned; instrumentation and tools, a category that includes theory and computation; and human capital, the most important asset for advancing the Grand Challenges and Transformative Opportunities. While “Challenges at the Frontiers of Matter and Energy: Transformative Opportunities for Discovery Science” could be viewed as a sequel to the original Grand Challenges report, it breaks much new ground in its assessment of the scientific landscape today versus the scientific landscape just a few years ago. In the original Grand Challenges report, it was noted that if the five Grand Challenges were met, our ability to direct matter and energy would be measured only by the limits of human imagination. This new report shows that, prodded by those challenges, the scientific community is positioned today to seize new opportunities whose impacts promise to be transformative for science and society, as well as dramatically accelerate progress in the pursuit of the original Grand Challenges.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Trivalent manganese on vacancies triggers rapid transformation of layered to tunneled manganese oxides (TMOs): Implications for occurrence of TMOs in low-temperature environment

Tunneled Mn oxides (TMOs) are common minerals in natural environment, particularly in ferromanganese nodules of oceanic and lake sediments. Their structures host a considerable amount of transition and rare earth metals, thus mediating metal cycling and bearing potential economic interest for exploiting these metals. TMOs form through topotactic transformation of layered Mn oxides (LMOs), such as vernadite, in natural environment. Trivalent Mn (Mn(III)) in the LMO structure is a critical player in the transformation, and the transformation is believed to be extremely slow at room temperature. However, the specific role of Mn(III) and its impacts on the transformation kinetics remains unknown. In the present study, we show that the formation of Mn(III) on vacancies of an LMO is the initial transformation step leading to TMOs, and that the transformation can be rapid at room temperature and circumneutral pH. Specifically, after pre–adsorbed with Mn(II) on vacancies at pH 4, δ–MnO 2 , a hexagonal birnessite analogous to vernadite, starts to transform to a 4 × 4 TMO at 1 h upon incubation at pH 7 and 21 °C under anoxic conditions. The rapid transformation is triggered by the comproportionation reaction between the vacancy-adsorbed Mn(II) and Mn(IV) in δ-MnO 2 that produces Mn(III) on the vacancies. Such intermediate Mn(III)-rich product acts as a precursor for subsequent rapid structural rearrangement to form tunnels. An incubation at lower or higher pH retards the transformation due to an insufficient amount of Mn(III) (pH 6) or the formation of triclinic birnessite (pH 8) as an intermediate product. The presence of O 2 favors the formation of triclinic birnessite at pH 8 and thus retards the transformation whereas O 2 enhances production of Mn(III)–rich hexagonal birnessite at pH 6 and 7 and promotes the transformation. We propose a novel transformation mechanism of LMOs to TMOs, highlighting the role of vacancy–adsorbed Mn(III) in the transformation. Furthermore, this work changes our understanding of TMO formation kinetics and suggests TMOs can readily form in low-temperature redox-fluctuating environment, such as lake and oceanic sediments where Mn(II) often coexists with LMOs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Detecting the Extent of Eutectoid Transformation in U-10Mo

During eutectoid transformation of U-10Mo alloy, uniform metastable γ UMo phase is expected to transform to a mixture of α-U and γ’-U 2 Mo phase. The presence of transformation products in final U-10Mo fuel, especially the α phase is considered detrimental for fuel irradiation performance, so it is critical to accurately evaluate the extent of transformation in the final U-10Mo alloy. This phase transformation can cause a volume change that induces a density change in final alloy. To understand this density and volume change, we developed a theoretical model to calculate the volume expansion and resultant density change of U-10Mo alloy as a function of the extent of eutectoid transformation. Based on the theoretically calculated density change for 0 to 100% transformation, we conclude that an experimental density measurement system will be challenging to employ to reliably detect and quantify the extent of transformation. Subsequently, to assess the ability of various methods to detect the transformation in U-10Mo, we annealed U-10Mo alloy samples at 500°C for various times to achieve in low, medium, and high extent of transformation. After the heat treatment at 500°C, the samples were metallographically polished and subjected to optical microscopy and x-ray diffraction (XRD) methods. Based on our assessment, optical microscopy and image processing can be used to determine the transformed area fraction, which can then be correlated with the α phase volume fraction measured by XRD analysis. XRD analysis of U-10Mo aged at 500°C detected only α phase and no γ’ was detected. To further validate the XRD results, atom probe tomography (APT) was used to understand the composition of transformed regions in U-10Mo alloys aged at 500°C for 10 hours. Based on the APT results, the lamellar transformation product was found to comprise α phase with close to 0 at% Mo and γ phase with 28–32 at% Mo, and the Mo concentration was highest at the α/γ interface.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Comparison study on transformation of iron oxyhydroxides: Based on theoretical and experimental data

We have investigated the catalytic transformation of ferrihydrite, feroxyhyte, and lepidocrocite in the presence of Fe(II). In this paper, the transformation from akaganeite and goethite to hematite in the presence of trace Fe(II) was studied in detail. The result indicates that trace Fe(II) can accelerate the transformation of akaganeite and goethite. Compared with the transformation of other iron oxyhydroxides (e.g., ferrihydrite, feroxyhyte, lepidocrocite, and akaganeite), a complete transformation from goethite to hematite was not observed in the presence of Fe(II). On the basis of our earlier and present experimental results, the transformation of various iron oxyhydroxides was compared based on their thermodynamic stability, crystalline structure, transformation mechanism, and transformation time. - Graphical abstract: The transformation of various iron oxyhydroxides in the presence of trace Fe(II) was compared based on experimental results, thermodynamic stability, crystalline structure, and transformation mechanism. Highlights: > Fe(II) can accelerate the transformation from akaganeite to hematite. > Small particles of goethite can transform to hematite in the presence of Fe(II). > Some hematite particles were found to be embedded within the crystal of goethite. > The relationship between structure and transformation mechanism was revealed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Organic matter transformations are disconnected between surface water and the hyporheic zone

Abstract. Biochemical transformations of organic matter (OM) are a primary driver of river corridor biogeochemistry, thereby modulating ecosystem processes at local to global scales. OM transformations are driven by diverse biotic and abiotic processes, but we lack knowledge of how the diversity of those processes varies across river corridors and across surface and subsurface components of river corridors. To fill this gap we quantified the number of putative biotic and abiotic transformations of organic molecules across diverse river corridors using ultra-high-resolution mass spectrometry. The number of unique transformations is used here as a proxy for the diversity of biochemical processes underlying observed profiles of organic molecules. For this, we use public data spanning the contiguous United States (ConUS) from the Worldwide Hydrobiogeochemical Observation Network for Dynamic River Systems (WHONDRS) consortium. Our results show that surface water OM had more biotic and abiotic transformations than OM from shallow hyporheic zone sediments (1–3 cm depth). We observed substantially more biotic than abiotic transformations, and the numbers of biotic and abiotic transformations were highly correlated with each other. We found no relationship between the number of transformations in surface water and sediments and no meaningful relationships with latitude, longitude, or climate. We also found that the composition of transformations in sediments was not linked with transformation composition in adjacent surface waters. We infer that OM transformations represented in surface water are an integrated signal of diverse processes occurring throughout the upstream catchment. In contrast, OM transformations in sediments likely reflect a narrower range of processes within the sampled volume. This indicates decoupling between the processes influencing surface water and sediment OM, despite the potential for hydrologic exchange to homogenize OM. We infer that the processes influencing OM transformations and the scales at which they operate diverge between surface water and sediments.

58 GEOSCIENCES↗

A scaling transformation for classifier output based on likelihood ratio: Applications to a CAD workstation for diagnosis of breast cancer

Purpose: The authors developed scaling methods that monotonically transform the output of one classifier to the ''scale'' of another. Such transformations affect the distribution of classifier output while leaving the ROC curve unchanged. In particular, they investigated transformations between radiologists and computer classifiers, with the goal of addressing the problem of comparing and interpreting case-specific values of output from two classifiers. Methods: Using both simulated and radiologists' rating data of breast imaging cases, the authors investigated a likelihood-ratio-scaling transformation, based on ''matching'' classifier likelihood ratios. For comparison, three other scaling transformations were investigated that were based on matching classifier true positive fraction, false positive fraction, or cumulative distribution function, respectively. The authors explored modifying the computer output to reflect the scale of the radiologist, as well as modifying the radiologist's ratings to reflect the scale of the computer. They also evaluated how dataset size affects the transformations. Results: When ROC curves of two classifiers differed substantially, the four transformations were found to be quite different. The likelihood-ratio scaling transformation was found to vary widely from radiologist to radiologist. Similar results were found for the other transformations. Our simulations explored the effect of database sizes on the accuracy of the estimation of our scaling transformations. Conclusions: The likelihood-ratio-scaling transformation that the authors have developed and evaluated was shown to be capable of transforming computer and radiologist outputs to a common scale reliably, thereby allowing the comparison of the computer and radiologist outputs on the basis of a clinically relevant statistic.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Broadband Characterization and Circuit Model Development of Transmission-Scale Transformers

This report describes broadband measurements of transmission-scale transformers typical in the electric power grid. This work was performed as part of the EMP Resilient Grid LDRD project at Sandia National Laboratories to generate circuit models that can be used for high-altitude electromagnetic pulse (HEMP) coupling simulations and response predictions. The objective of the work was to obtain characterization data of substation yard equipment across a frequency range relevant to HEMP. Vector network analyzer measurements up to 100 MHz were performed on two power transformers at ABB-Hitachi and a single ITEC potential transformer. Custom cable breakouts were designed to interface with the transformer terminals and provide ground connections to the chassis at the base of the transformer bushings. The three-phase terminals of the power transformers were measured as a common mode impedance using a parallel resistive splitter, and the single-phase terminals of the potential transformer were measured directly. A vector fitting algorithm was used to empirically fit circuit models to the resulting two-port networks and input impedances of the measured objects. Simplified circuit representations of the input impedances were also generated to assess the degree of precision needed for high-altitude electromagnetic pulse response predictions, which were performed in Sandia's XYCE circuit simulator platform. HEMP coupling simulations using the transformer models showed significant reduction in the voltage peak and broadening in the pulse width seen at the power transformer compared to the traveling wave voltage. This indicated the importance of the load condition when defining the coupled insult in an electric power substation. Simplified circuit models showed a similar voltage at the transformer with a smoothed waveform. The presence of potential transformers in the simulation did not significantly change the simulated voltage at the power transformer. Single-port input impedance models were also developed to define load conditions when transfer characteristics were not necessary.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Mn(II)-induced phase transformation of Mn(IV) oxide in seawater

Manganese (Mn) oxides are key components of oceanic and lacustrine Mn nodules and influence metal cycling through oxidation and adsorption processes. Layered Mn oxides (LMOs) are the most common minerals in these nodules and the immediate products of microbially mediated Mn(II) oxidation by O 2 . LMOs can transform into tunneled Mn oxides (TMOs), Mn oxyhydroxides (MnOOH), or Mn(II,III) phase (Mn 3 O 4 ). LMOs often concur with Mn(II) in the environment and the adsorption and oxidation of Mn(II) by LMOs can greatly promote the transformation of LMOs to those phases. However, the Mn(II)-promoted transformation of LMOs in seawater—rich in various cations (300 mM Na + , 10 mM K + , 50 mM Ca 2+ , and 10 mM Mg 2+ ) remains poorly understood. We examined the transformation of δ-MnO 2 in artificial seawater (pH 8.2) under anoxic conditions with the Mn(II)/MnO 2 ratio (r) ranging from 0.08 to 3.83. To assess the effect of ionic strength (IS), parallel experiments were conducted in a mixed 530 mM NaCl and 10 mM KCl solution (having seawater ionic strength but without Ca 2+ and Mg 2+ ) and in 100 mM NaCl solution as a control. At low r (0.08), δ-MnO 2 transformed into triclinic birnessite and a 4 × 4 TMO in 100 mM NaCl solution, which, however, was suppressed in seawater due to strong interactions of Ca 2+ /Mg 2+ with δ-MnO 2 . In the mixed 530 mM NaCl and 10 mM KCl solution (the same ionic strength as of seawater), the transformation occurred extensively but the products had lower crystallinity compared to in 100 mM NaCl solution. At the high Mn(II)/MnO 2 ratios (0.5 ≤ r ≤ 3.83), δ-MnO 2 transformed extensively into MnOOH phases and hausmannite (Mn 3 O 4 ) in 100 mM NaCl solution. The seawater suppressed the transformation, but the suppression became weaker with increasing Mn(II)/MnO 2 ratio. For example, the transformation was completely suppressed at r = 0.5 but essentially negligible at r = 3.83. The suppression at these high Mn(II)/MnO 2 ratios was mainly ascribed to the influence of Ca 2+ and Mg 2+ rather than of the high IS, and the weaker suppression at the higher Mn(II)/MnO 2 ratio suggests stronger competition of Mn(II) with Ca 2+ /Mg 2+ for interacting with δ-MnO 2 . Moreover, the composition and crystallinity of the transformation products (i.e., the relative abundance of MnOOH (α, β, and γ) and Mn 3 O 4 ) were influenced by both the high ionic strength and the presence of Ca 2+ and Mg 2+ . Therefore, even though Ca 2+ and Mg 2+ concentrations are much lower than Na + in seawater, their impacts on the transformation are dominant. Our study explains why MnOOH phases, hausmannite, and TMOs are less common than LMOs in oceanic environments, partially because seawater chemistry suppresses their formation. LMOs are the most reactive for metal adsorption and oxidation among all Mn oxides. Thus, the high stability of LMOs in an oceanic environment confers the high impacts of Mn oxides on metal cycling in the ocean.

Divalent manganese↗

Sawtooth oscillation behavior with varying amounts of applied stellarator rotational transform.

In this study, tokamak-like sawtooth oscillations are observed in the Compact Toroidal Hybrid (CTH), a current-carrying stellarator. CTH has the unique ability to change the amount of the applied vacuum rotational transform from external stellarator coils relative to the rotational transform generated by the internal plasma current to investigate the effects of strong three-dimensional magnetic shaping on sawtooth behavior. The observed sawteeth in CTH, for plasmas with monotonically decreasing rotational transform profiles dominated by the plasma current, have characteristics of those observed on tokamaks including (1) a central emissivity rise and then a sudden crash with a well-defined inversion radius, (2) the presence of an m = 1 emissivity fluctuation, and (3) the normalized inversion surface radius scales with the total edge rotational transform. We explore the properties of an ensemble of discharges in CTH in which the fractional rotational transform, defined as the vacuum rotational transform divided by the total rotational transform, is systematically varied from 0.04 to 0.42 to observe changes in sawtooth oscillation dynamics. Over this range of the fractional rotational transform, the measured sawtooth period decreased by a factor of two. At a high fractional rotational transform, the sawtooth amplitude is observed to consist of only low-amplitude oscillations while the measured crash time of the sawtooth oscillation does not appear to have a strong dependence on the amount of the fractional transform applied. Lastly, experimental results indicate that the low-amplitude sawteeth are accompanied by a decrease in the sawtooth period and predominantly correlated with the mean elongation (due to the increasing fractional rotational transform) of the non-axisymmetric plasmas within CTH rather than other global equilibrium parameters.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Nonlinear Bogolyubov-Valatin transformations: Two modes

Extending our earlier study of nonlinear Bogolyubov-Valatin transformations (canonical transformations for fermions) for one fermionic mode, in the present paper, we perform a thorough study of general (nonlinear) canonical transformations for two fermionic modes. We find that the Bogolyubov-Valatin group for n=2 fermionic modes, which can be implemented by means of unitary SU(2{sup n}=4) transformations, is isomorphic to SO(6;R)/Z{sub 2}. The investigation touches on a number of subjects. As a novelty from a mathematical point of view, we study the structure of nonlinear basis transformations in a Clifford algebra [specifically, in the Clifford algebra C(0,4)] entailing (supersymmetric) transformations among multivectors of different grades. A prominent algebraic role in this context is being played by biparavectors (linear combinations of products of Dirac matrices, quadriquaternions, sedenions) and spin bivectors (antisymmetric complex matrices). The studied biparavectors are equivalent to Eddington's E-numbers and can be understood in terms of the tensor product of two commuting copies of the division algebra of quaternions H. From a physical point of view, we present a method to diagonalize any arbitrary two-fermion Hamiltonians. Relying on Jordan-Wigner transformations for two-spin-1/2 and single-spin-3/2 systems, we also study nonlinear spin transformations and the related problem of diagonalizing arbitrary two-spin-1/2 and single-spin-3/2 Hamiltonians. Finally, from a calculational point of view, we pay due attention to explicit parametrizations of SU(4) and SO(6;R) matrices (of respective sizes 4x4 and 6x6) and their mutual relation. - Highlights: > Reveals the structure of nonlinear canonical transformations for two fermionic modes. > Studies nonlinear basis transformations in a Clifford algebra. > Focuses on methodological and structural aspects. > Presents a new approach to the diagonalization of 4x4 matrix Hamiltonians. > Presents the relation between explicit parametrizations of SU(4) and SO(6;R) matrices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A survey of techniques for optimizing transformer inference

Recent years have seen a phenomenal rise in the performance and applications of transformer neural networks. The family of transformer networks, including Bidirectional Encoder Representations from Transformer (BERT), Generative Pretrained Transformer (GPT) and Vision Transformer (ViT), have shown their effectiveness across Natural Language Processing (NLP) and Computer Vision (CV) domains. Transformer-based networks such as ChatGPT have impacted the lives of common men. However, the quest for high predictive performance has led to an exponential increase in transformers' memory and compute footprint. Researchers have proposed techniques to optimize transformer inference at all levels of abstraction. Further, this paper presents a comprehensive survey of techniques for optimizing the inference phase of transformer networks. We survey techniques such as knowledge distillation, pruning, quantization, neural architecture search and lightweight network design at the algorithmic level. We further review hardware-level optimization techniques and the design of novel hardware accelerators for transformers. We summarize the quantitative results on the number of parameters/FLOPs and the accuracy of several models/techniques to showcase the tradeoff exercised by them. We also outline future directions in this rapidly evolving field of research. We believe that this survey will educate both novice and seasoned researchers and also spark a plethora of research efforts in this field.

97 MATHEMATICS AND COMPUTING↗

Fundamental Mechanisms Driving the Amorphous to Crystalline Phase Transformation

Phase transformations are ubiquitous, fundamental phenomena that lie at the heart of many structural, optical and electronic properties in condensed matter physics and materials science. Many transformations, especially those occurring under extreme conditions such as rapid changes in the thermodynamic state, are controlled by poorly understood processes involving the nucleation and quenching of metastable phases. Typically these processes occur on time and length scales invisible to most experimental techniques ({micro}s and faster, nm and smaller), so our understanding of the dynamics tends to be very limited and indirect, often relying on simulations combined with experimental study of the ''time infinity'' end state. Experimental techniques that can directly probe phase transformations on their proper time and length scales are therefore key to providing fundamental insights into the whole area of transformation physics and materials science. LLNL possesses a unique dynamic transmission electron microscope (DTEM) capable of taking images and diffraction patterns of laser-driven material processes with resolution measured in nanometers and nanoseconds. The DTEM has previously used time-resolved diffraction patterns to quantitatively study phase transformations that are orders of magnitude too fast for conventional in situ TEM. More recently the microscope has demonstrated the ability to directly image a reaction front moving at {approx}13 nm/ns and the nucleation of a new phase behind that front. Certain compound semiconductor phase change materials, such as Ge{sub 2}Sb{sub 2}Te{sub 5} (GST), Sb{sub 2}Te and GeSb, exhibit a technologically important series of transformations on scales that fall neatly into the performance specifications of the DTEM. If a small portion of such material is heated above its melting point and then rapidly cooled, it quenches into an amorphous state. Heating again with a less intense pulse leads to recrystallization into a vacancy-stabilized metastable rock salt structure. Each transformation takes {approx}10-100 ns, and the cycle can be driven repeatedly a very large number of times with a nanosecond laser such as the DTEM's sample drive laser. These materials are widely used in optical storage devices such as rewritable CDs and DVDs, and they are also applied in a novel solid state memory technology - phase change memory (PCM). PCM has the potential to produce nonvolatile memory systems with high speed, extreme density, and very low power requirements. For PCM applications several materials properties are of great importance: the resistivities of both phases, the crystallization temperature, the melting point, the crystallization speed, reversibility (number of phase-transformation cycles without degradation) and stability against crystallization at elevated temperature. For a viable technology, all these properties need to have good scaling behavior, as dimensions of the memory cells will shrink with every generation. In this LDRD project, we used the unique single-shot nanosecond in situ experimentation capabilities of the DTEM to watch these transformations in GST on the time and length scales most relevant for device applications. Interpretation of the results was performed in conjunction with atomistic and finite-element computations. Samples were provided by collaborators at IBM and Stanford University. We observed, and measured the kinetics of, the amorphous-crystalline and melting-solidification transitions in uniform thin-film samples. Above a certain threshold, the crystal nucleation rate was found to be enormously high (with many nuclei appearing per cubic {micro}m even after nanosecond-scale incubation times), in agreement with atomistic simulation and consistent with an extremely low nucleation barrier. We developed data reduction techniques based on principal component analysis (PCA), revealing the complex, multi-dimensional evolution of the material while suppressing noise and irrelevant information. Using a novel specimen geometry, we also achieved repeated switching between the amorphous and crystalline phases enabling in situ study of structural change after phase cycling, which is relevant to device performance. We also observed the coupling between the phase transformations and the evolution of morphology on the nanometer scale, revealing the gradual development of striations in uniform films and preferential melting at sharp edges in laser-heated nanopatterned GST. This nonuniform melting, interpreted through simulation as being a direct result of geometrical laser absorption effects, appears to be responsible for a marked loss in morphological stability even at moderate laser intensities and may be an important factor in the longevity of nanostructured phase change materials in memory applications.

36 MATERIALS SCIENCE↗

Application of Distribution Transformer Thermal Life Models to Electrified Vehicle Charging Loads Using Monte-Carlo Method: Preprint

Concentrated purchasing patterns of plug-in vehicles may result in localized distribution transformer overload scenarios. Prolonged periods of transformer overloading causes service life decrements, and in worst-case scenarios, results in tripped thermal relays and residential service outages. This analysis will review distribution transformer load models developed in the IEC 60076 standard, andapply the model to a neighborhood with plug-in hybrids. Residential distribution transformers are sized such that night-time cooling provides thermal recovery from heavy load conditions during the daytime utility peak. It is expected that PHEVs will primarily be charged at night in a residential setting. If not managed properly, some distribution transformers could become overloaded, leading toa reduction in transformer life expectancy, thus increasing costs to utilities and consumers. A Monte-Carlo scheme simulated each day of the year, evaluating 100 load scenarios as it swept through the following variables: number of vehicle per transformer, transformer size, and charging rate. A general method for determining expected transformer aging rate will be developed, based on the energyneeds of plug-in vehicles loading a residential transformer.

24 POWER TRANSMISSION AND DISTRIBUTION↗

In situ investigation of stress-induced martensitic transformation in granular shape memory ceramic packings

Stress-induced martensitic transformation can occur in granular shape memory materials when individual particles experience high stresses and transform from a high-symmetry austenite phase to a low-symmetry martensite phase. This involves a highly heterogeneous distribution of the driving force and very low mechanical constraint for martensite nucleation, so the transformation behavior can be dramatically different from the well-documented case of monolithic solids. In this work, we investigate the stress-induced martensitic transformation in granular shape memory ceramic packings, which consist of single-crystal micro-particles of ZrO 2 -12 at%CeO 2 and ZrO 2 -15 at%CeO 2 . Using in situ neutron diffraction, we study how the phase fraction, lattice strain, and integral peak broadness evolve during external loading, unloading, and subsequent heating. Several peculiar features are discovered, including (i) a continuous mode of transformation with a wide range of transformation loads, (ii) co-evolution of the packing structure, contact deformation, and martensitic transformation, and (iii) a strong correlation between the peak broadening and the transformed phase fraction. In addition, we show the first direct evidence of reversible stress-induced martensitic transformation in granular materials. We additionally discuss the mechanism for martensite nucleation and growth in granular packings and show how that leads to the observed transformation characteristics.

36 MATERIALS SCIENCE↗

Pressure response of vacancy ordered maghemite ({gamma}-Fe{sub 2}O{sub 3}) and high pressure transformed hematite ({alpha}-Fe{sub 2}O{sub 3})

Combined XRD and Moessbauer effect spectroscopy studies to high pressures of {approx}30 GPa of vacancy ordered maghemite are presented. The vacancy ordered superstructure is robust and remains intact up to the pressure-induced onset transition to hematite at 13-16 GPa. The pressure transformed hematite is shown to be crystallographically textured, unlike the randomised low pressure maghemite phase. This arises out of a pressure or stress instigated topotactic transformation of the cubic-spinel to hexagonal-corundum structure. The textured sample permits us to obtain information on the spin reorientation behavior of the pressure transformed hematite in compression and decompression sequences. Spin reorientation is restricted to {approx}15 Degree-Sign over wide pressure ranges, attributable to the effect of entrapped vacancies in the high pressure structure. Thus there are structural and magnetic peculiarities specific to pressure transformed hematite not evident in pressurized hematite starting material. These are triggered by the maghemite{yields}hematite transformation. - Graphical abstract: Pressure instigated topotactic transformation of vacancy ordered {gamma}-Fe{sub 2}O{sub 3}{yields}{alpha}-Fe{sub 2}O{sub 3}. There is restricted spin (B{sub hf}) reorientation in the new pressure transformed hematite due to entrapped vacancies. The change in direction of V{sub zz} signifies a distortion of the FeO{sub 6} octahedral local environment. Highlights: Black-Right-Pointing-Pointer Robust vacancy ordered superstructure in maghemite to high pressures. Black-Right-Pointing-Pointer Pressure instigated topotactic transformation to hematite and subsequent texture. Black-Right-Pointing-Pointer Defect trapping in the pressure transformed hematite. Black-Right-Pointing-Pointer Entrapped defects restricts spin reorientation in pressure transformed hematite. Black-Right-Pointing-Pointer Contrasting behavior with pressurized hematite starting material.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Microstructure of warm rolling and pearlitic transformation of ultrafine-grained GCr15 steel

Pearlitic transformation mechanisms have been investigated in ultra-fine grained GCr15 steel. The ultrafine-grained steel, whose grain size was less than 1 μm, was prepared by thermo-mechanical treatment at 873 K and then annealing at 923 K for 2 h. Pearlitic transformation was conducted by reheating the ultra-fine grained samples at 1073 K and 1123 K for different periods of time and then cooling in air. Scanning electron microscope observation shows that normal lamellar pearlite, instead of granular cementite and ferrite, cannot be formed when the grain size is approximately less than 4(± 0.6) μm, which yields a critical grain size for normal lamellar pearlitic transformations in this chromium alloyed steel. The result confirms that grain size has a great influence on pearlitic transformation by increasing the diffusion rate of carbon atoms in the ultra-fine grained steel, and the addition of chromium element doesn't change this pearlitic phase transformation rule. Meanwhile, the grain growth rate is reduced by chromium alloying, which is beneficial to form fine grains during austenitizing, thus it facilitating pearlitic transformation by divorced eutectoid transformation. Moreover, chromium element can form a relatively high gradient in the frontier of the undissolved carbide, which promotes carbide formation in the frontier of the undissolved carbide, i.e., chromium promotes divorced eutectoid transformation. - Highlights: • Ultrafine-grained GCr15 steel was obtained by warm rolling and annealing technology. • Reduction of grain size makes pearlite morphology from lamellar to granular. • Adding Cr does not change normal pearlitic phase transformation rule in UFG steel. • Cr carbide resists grain growth and facilitates pearlitic transformation by DET.

36 MATERIALS SCIENCE↗

In-situ TEM observation of hcp-Ti to fcc-Ti phase transformation in Nb-Ti-Si based alloys

Highlights: • Hcp-Ti to fcc-Ti phase transformation has been investigated by direct TEM observation. • Two periodic structures nucleate and act as modulated structures during the hcp-Ti to fcc-Ti phase transformation. • The transformation proceeds through formation of growth ledges at interfaces. • Stability of Ti might be decreased in the following order: hcp, periodic structures, fcc. - Abstract: Phase transformation process of interfacial Ti precipitates in Nb-Ti-Si based alloys is systematically investigated by in-situ transmission electron microscopy (TEM) observation. The Ti precipitates exhibit an uncommon face-centered cubic (fcc) structure, which can be identified by analyzing its chemical composition and phase transformation characteristics. Fcc-Ti precipitates precipitate from Nbss and partially transform into hexagonal close-packed Ti (hcp-Ti) lamellae during heat-treatment, which will reversely transform into fcc-Ti lamellae during heating in TEM. Two periodic structures nucleate and act as modulated structures in the process of hcp-Ti to fcc-Ti reverse phase transformation. The transformation proceeds through formation of growth ledges at interfaces. Origins of the two periodic structures and ledge model for the phase transformation have been discussed.

36 MATERIALS SCIENCE↗

The expression of keratin 6 is regulated by the activation of the ERK1/2 pathway in arsenite transformed human urothelial cells

Urothelial cancers have an environmental etiological component, and previous studies from our laboratory have shown that arsenite (As{sup +3}) can cause the malignant transformation of the immortalized urothelial cells (UROtsa), leading to the expression of keratin 6 (KRT6). The expression of KRT6 in the parent UROtsa cells can be induced by the addition of epidermal growth factor (EGF). Tumors formed by these transformed cells have focal areas of squamous differentiation that express KRT6. The goal of this study was to investigate the mechanism involved in the upregulation of KRT6 in urothelial cancers and to validate that the As{sup +3}-transformed UROtsa cells are a model of urothelial cancer. The results obtained showed that the parent and the As{sup +3}-transformed UROtsa cells express EGFR which is phosphorylated with the addition of epidermal growth factor (EGF) resulting in an increased expression of KRT6. Inhibition of the extracellular-signal regulated kinases (ERK1/2) pathway by the addition of the mitogen-activated protein kinase kinase 1 (MEK1) and MEK2 kinase inhibitor U0126 resulted in a decrease in the phosphorylation of ERK1/2 and a reduced expression of KRT6. Immuno-histochemical analysis of the tumors generated by the As{sup +3}-transformed isolates expressed EGFR and tumors formed by two of the transformed isolates expressed the phosphorylated form of EGFR. These results show that the expression of KRT6 is regulated at least in part by the ERK1/2 pathway and that the As{sup +3}-transformed human urothelial cells have the potential to serve as a valid model to study urothelial carcinomas. - Highlights: • Keratin 6 is induced in As{sup +3}-transformed transformed UROtsa cells by EGF. • The ERK1/2 signaling pathway regulates the expression of KRT6. • As{sup +3}-transformed human urothelial cells can serve as a model to study urothelial carcinomas.

60 APPLIED LIFE SCIENCES↗