SEARCH · Engineering Papers

Results for “tabulated data”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

All sources NASA NTRS DOE OSTI

NASA NTRS1978

Analysis and Evaluation of Processes and Equipment in Tasks 2 and 4 of the Low-cost Solar Array Project

The significant economic data for the current production multiblade wafering and inner diameter slicing processes were tabulated and compared to data on the experimental and projected multiblade slurry, STC ID diamond coated blade, multiwire slurry and crystal systems fixed abrasive multiwire slicing methods. Cost calculations were performed for current production processes and for 1982 and 1986 projected wafering techniques.

Goldman, H.↗

NASA NTRS1991

Traditional anthropology and geographical information systems in the collaborative study of Cassava in Africa

Cross-cultural, village-level, and farmer surveys have been used with a geographical information system to describe the distribution and relative importance of cassava (manioc, yuca, Manihot esculenta) in its cultural, economic, and ecological contexts. It presents examples of data management for mapping, sample selection, cross-tabulation of characteristics, combination of data types for indices and hypothesis testing. The methods used are reviewed, and some of the main conclusions of the study are presented.

Romanoff, Steven↗

NASA NTRS1994

A supercritical airfoil experiment

The purpose of this investigation is to provide a comprehensive data base for the validation of numerical simulations. The objective of the present paper is to provide a tabulation of the experimental data. The data were obtained in the two-dimensional, transonic flowfield surrounding a supercritical airfoil. A variety of flows were studied in which the boundary layer at the trailing edge of the model was either attached or separated. Unsteady flows were avoided by controlling the Mach number and angle of attack. Surface pressures were measured on both the model and wind tunnel walls, and the flowfield surrounding the model was documented using a laser Doppler velocimeter (LDV). Although wall interference could not be completely eliminated, its effect was minimized by employing the following techniques. Sidewall boundary layers were reduced by aspiration, and upper and lower walls were contoured to accommodate the flow around the model and the boundary-layer growth on the tunnel walls. A data base with minimal interference from a tunnel with solid walls provides an ideal basis for evaluating the development of codes for the transonic speed range because the codes can include the wall boundary conditions more precisely than interference connections can be made to the data sets.

Mateer, G. G.↗

NASA NTRS1991

Program Calibrates Strain Gauges

Program dramatically reduces personnel and time requirements for acceptance tests of hardware. Data-acquisition system reads output from Wheatstone full-bridge strain-gauge circuit and calculates strain by use of shunt calibration technique. Program nearly instantaneously tabulates and plots strain data against load-cell outputs. Modified to acquire strain data for other specimens wherever full-bridge strain-gauge circuits used. Written in HP BASIC.

Okazaki, Gary D.↗

NASA NTRS1984

Availability of the DSN Telemetry Data System and Its Major Elements, Including the TWM Assemblies

The DSN discrepancy report system which records all outages of DSN data systems that occur during mission support operations is described. The recorded outages of the telemetry data system for 1981 through 1983 were tabulated and availability characteristics of the telemetry data system and several of its major elements, including the traveling wave maser (TWM) Assemblies were developed. Availability characteristics of the TWM assemblies are compared with those of other DSN subsystems and assemblies. It is found that for a three year period, the availability of the telemetry data system is 99.0%, and its mean time to restore service is 0.9 hours; the availability of the TWM assemblies is 99.83%, and their mean time to restore service is 2.5 hours.

Stevens, R.↗

NASA NTRS2002

Charge Transfer Calculations and Database for Astrophysics

A variety of theoretical approaches, having different but overlapping energy ranges of applicability, are applied to investigate charge transfer processes for collisions of atomic ions with atoms and molecules. The methods include quantal molecular-orbital close-coupling, classical trajectory Monte Carlo, and continuum distorted wave methods. Recent collision systems studied include S(+4) + H, S(+4) + He, N(+7) + He, H2O, CO, and CO2, O(+q)(q = 1 - 8) + H, H2, and S(+q)(q = 1 - 16) + H2. The database effort is concentrating on astrophysically important reactions of atomic ions X(+q)(X=H-Zn, q=1-4, and selected higher charges) with H, He, various metal atoms, H2, and other selected molecular targets. Existing data, much of it produced by us, has been compiled and critically evaluated. Data for many reactions missing in the literature are estimated using the multichannel Landau-Zener approximation. Fits to cross sections and rate coefficients using standard functions are provided as well as tabulations of the raw data. The database is available on the World Wide Web at cfadc.phy.ornl.gov/astro/ps/data.

Wang, J. G.↗

NASA NTRS1972

Revision of the standard reference data for thermocouples.

Revision of the International Practical Temperature Scale requires that there be changes for all accurately tabulated thermophysical values. Revised reference data for thermocouples have been generated in a program carried out by the National Bureau of Standards. The new reference data reflect not only revisions in the temperature scale, but also slight changes in the materials themselves and improvements in data fitting methods. A new NBS monograph that contains tables, analytic expressions, various approximations, and explanatory text has been prepared. A general discussion of the project and some specific examples are given.

Powell, R. L.↗

NASA NTRS1980

SEASAT-SAR data analysis in the US: An update

A graph is shown which compares SEASAT synthetic aperture radar (SAR) wave length measurements and Krasman's shallow water dispersion relationship for a swell system of deep water length 210 m and period 11.7 sec. The data were taken during the Duck experiment. The status of the production of optically correlated SAR data is given along with a tabulation of both digitally and optically processed SAR image data available to the user community as of Aug. 1979. Results from several SAR workshops are mentioned.

Dunne, J. A.↗

NASA NTRS1973

Pressure loads and aerodynamic force information for the -89A space shuttle orbiter configuration, volume 2

Experimental aerodynamic investigations were conducted in a low speed wind tunnel on an 0.0405 scale representation of the 89A light weight Space Shuttle Orbiter to obtain pressure loads data in the presence of the ground for orbiter structural strength analysis. The model and the facility are described, and data reduction is outlined. Tables are included for data set/run number collation, data set/component collation, model component description, and pressure tap locations by series number. Tabulated force and pressure source data are presented.

Mennell, R. C.↗

NASA NTRS1982

Thermal stability of the surface layer and its relation to the dispersion of primary pollutants in St. Louis

The present investigation is concerned with the applicability of the vertical temperature gradient, DT, as a dispersion parameter for urban area sources. Data on DT were tabulated from temperature measurements at 5 m and 30 m obtained on 30 m towers at 12 stations. DT was obtained by subtracting the value at 5 m from that at 30 m. Positive DT values represent an inversion. Accuracy of the DT data is 0.1 K. Hourly measurements of DT along with concentrations of the primary pollutants, CO, NO, and total hydrocarbons (THC), are available from the 1976 RAPS data base for St. Louis. Linear correlations between a given pollutant species concentration and DT are developed from that data set. It could be confirmed that a strong positive correlation exists at night between the thermal stability of the lowest part of the boundary layer and the urban concentration of the primary pollutants CO, NO, and hydrocarbons.

Remsberg, E. E.↗

NASA NTRS1981

Ozone contamination in aircraft cabins: Results from GASP data and analyses

The global atmospheric sampling program pertaining to the problem of ozone contamination in commercial airplane cabins is described. Specifically, analyses of GASP data have: confirmed the occurrence of high ozone levels in aircraft cabins and documented the ratio of ozone inside and outside the cabins of two B747 airliners, including the effects of air conditioning modifications on that ratio; defined ambient ozone climatology at commercial airplane cruise altitudes, including tabulation of encounter frequency data which were not available before GASP; and outlined procedures for estimating the frequency of flights encountering high cabin ozone levels using climatological ambient ozone data, and verified these procedures against cabin measurements.

Holdeman, J. D.↗

NASA NTRS1981

Ozone contamination in aircraft cabins - Results from GASP data and analyses

The paper reviews results from the NASA Global Atmospheric Sampling Program (GASP) pertaining to the problem of ozone contamination in commercial aircraft cabins. Specifically, analyses of GASP data have (1) confirmed the high ozone levels in aircraft cabins and documented the ratio of ozone inside and outside the cabins of two B747 airliners, including the effects of air conditioning modifications on that ratio; (2) defined ambient ozone climatology at commercial aircraft cruise altitudes, including tabulation of encounter frequency data; and (3) outlined procedures for estimating the frequency of flights encountering high cabin ozone levels using climatological ambient ozone data and verified these procedures against cabin measurements.

Holdeman, J. D.↗

DOE OSTI2020

The Hα Dots Survey. II. A Second List of Faint Emission-line Objects

We present the second catalog of serendipitously discovered compact extragalactic emission-line sources—Hα Dots. These objects have been discovered in searches of moderately deep narrow-band images acquired for the ALFALFA Hα project. In addition to cataloging 119 new Hα Dots, we also present follow-up spectral data for the full sample. These spectra allow us to confirm the nature of these objects as true extragalactic emission-line objects, to classify them in terms of activity type (star-forming or AGN), and to identify the emission line via which they were discovered. We tabulate photometric and spectroscopic data for the all objects, and we present an overview of the properties of the full Hα Dot sample. The Hα Dots represent a broad range of star-forming and active galaxies detected via several different emission lines over a wide range of redshifts. The sample includes Hα-detected blue compact dwarf galaxies at low redshift, [O iii]-detected Seyfert 2 and Green Pea-like galaxies at intermediate redshifts, and QSOs detected via one of several UV emission lines, including Lyα. Despite the heterogeneous appearance of the resulting catalog of objects, we show that our selection method leads to well-defined samples of specific classes of emission-line objects with properties that allow for statistical studies of each class.

79 ASTRONOMY AND ASTROPHYSICS↗

NASA NTRS1994

A supercritical airfoil experiment

The purpose of this investigation is to provide a comprehensive data base for the validation of numerical simulations. The initial results of the study (single angle of attack) were presented in ref. 1, where the effects of various parameters and the adequacies of selected turbulence models were discussed. The objective of the present paper is to provide a tabulation of the experimental data. The data were obtained in the two-dimensional, transonic flowfield surrounding a supercritical airfoil. A variety of flows were studied in which the boundary layer at the trailing edge of the model was either attached or separated. Unsteady flows were avoided by controlling the Mach number and angle of attack. Surface pressures were measured on both the model and wind tunnel walls, and the flowfield surrounding the model was documented using a laser Doppler velocimeter (LDV). Although wall interference could not be completely eliminated, its effect was minimized by employing the following techniques. Sidewall boundary layers were reduced by aspiration, and upper and lower walls were contoured to accommodate the flow around the model and the boundary-layer growth on the tunnel walls. A data base with minimal interference from a tunnel with solid walls provides an ideal basis for evaluating the development of codes for the transonic speed range because the codes can include the wall boundary conditions more precisely than interference corrections can be made to the data sets.

Mateer, George G.↗

NASA NTRS1954

Preliminary Altitude Performance Characteristics of the J57-P-1 Turbojet Engine with Fixed-area Exhaust Nozzle

An investigation to determine the altitude performance of the J57-P-1 turbojet engine and components was conducted at the NACA Lewis altitude wind tunnel. Data were obtained over a corrected inboard rotor speed range from 56 to 106 percent of rated speed, with intercompressor bleeds both open and closed, at altitudes from 15,000 to 50,000 feet and at a flight Mach number of 0.81. The corresponding range of Reynolds number indices was from 0.858 to 0.213. All data presented were obtained with a fixed-area exhaust nozzle sized according to the manufacturer's specification. Over-all engine performance parameters are presented as functions of inboard rotor speed corrected on the basis of engine inlet temperature. Component parameters are presented as functions of their respective corrected rotor speeds. A tabulation of all performance data is included in addition to the graphical presentation. Corrected net thrust is unusually sensitive to changes in corrected inboard rotor speed in the high speed region. A change of 1 percent in speed, at sated speed, produced a change of 6 percent in corrected net thrust . At rated engine speed, increasing the altitude from 15,000 to 50,000 feet at a constant flight Mach number of 0.81 increased the specific fuel consumption 13 percent but did not affect corrected net thrust.

Bloomer, Harry E.↗

NASA NTRS1993

Jet-induced ground effects on a parametric flat-plate model in hover

The jet-induced forces generated on short takeoff and vertical landing (STOVL) aircraft when in close proximity to the ground can have a significant effect on aircraft performance. Therefore, accurate predictions of these aerodynamic characteristics are highly desirable. Empirical procedures for estimating jet-induced forces during the vertical/short takeoff and landing (V/STOL) portions of the flight envelope are currently limited in accuracy. The jet-induced force data presented significantly add to the current STOVL configurations data base. Further development of empirical prediction methods for jet-induced forces, to provide more configuration diversity and improved overall accuracy, depends on the viability of this STOVL data base. The data base may also be used to validate computational fluid dynamics (CFD) analysis codes. The hover data obtained at the NASA Ames Jet Calibration and Hover Test (JCAHT) facility for a parametric flat-plate model is presented. The model tested was designed to allow variations in the planform aspect ratio, number of jets, nozzle shape, and jet location. There were 31 different planform/nozzle configurations tested. Each configuration had numerous pressure taps installed to measure the pressures on the undersurface of the model. All pressure data along with the balance jet-induced lift and pitching-moment increments are tabulated. For selected runs, pressure data are presented in the form of contour plots that show lines of constant pressure coefficient on the model undersurface. Nozzle-thrust calibrations and jet flow-pressure survey information are also provided.

Wardwell, Douglas A.↗

NASA NTRS1988

Airborne 20-65 micron spectrophotometry of Comet Halley

Observations of Comet Halley with a grating spectrometer on board the Kuiper Airborne Observatory on four nights in Dec. 1985 to Apr. 1986 are reported. Low resolution 20 to 65 micrometer spectra of the nucleus with a 40 arcsec FWHM beam was obtained on 17 Dec. 1985, and on 15 and 17 Apr. 1986. On 20 Dec. 1985, only a 20 to 35 micrometer spectrum was obtained. Most of the data have been discussed in a paper where the continuum was dealt with. In that paper, models were fit to the continuum that showed that more micron sized particles of grain similar to amorphous carbon were needed to fit the spectrum than were allowed by the Vega SP-2 mass distribution, or that a fraction of the grains had to be made out of a material whose absorption efficiency fell steeper than lambda sup -1 for lambda greater than 20 micrometers. Spectra was also presented taken at several points on the coma on 15 Apr. which showed that the overall shape to the spectrum is the same in the coma. Tabulated values of the data and calibration curves are available. The spectral features are discussed.

Glaccum, William↗

NASA NTRS2007

Contrasting Perspectives Of Junior versus Senior NASA ISS Flight Controllers On Leadership And Cultural Issues

NASA flight controllers have always worked in a very demanding environment, but the International Space Station (ISS) poses even more challenges than prior missions. A recent NASA/Ames survey by Parke and Orasanu of NASA/Johnson flight controllers uncovered concerns about communications problems between American personnel and their international counterparts. To better understand these problems, we interviewed 14 senior and 12 junior ISS flight controllers at NASA/Johnson about leadership and cultural challenges they face and strategies for addressing these challenges. The qualitative interview data were coded and tabulated. Here we present quantitative analyses testing for differences between junior and senior controllers. Based on nonparametric statistical tests comparing responses across groups, the senior controllers were significantly more aware of the impact of working in dispersed teams, the context of constant change, and the upcoming multilateral challenges, while junior controllers were more aware of language and cultural issues. We consider our findings in light of other studies of controllers and other known differences between senior and junior controllers. For example, the fact that senior controllers had their formative early experience controlling pre-ISS short-duration Shuttle missions seems to have both positive and negative aspects, which are supported by our data. Our findings may also reflect gender differences, but we cannot unconfound this effect in our data because all the senior respondents were males. Many of the junior-senior differences are not only due to elapsed time on the job, but also due to a cohort effect. The findings of this study should be used for training curricula tailored differently for junior and senior controllers.

Clement, James L.↗