Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “synthesis (scalable processing)”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

Modeling of threshold and dynamics behavior of organic nanostructured lasers

Organic dye molecules offer significant potential as gain media in the emerging field of optical amplification and lasing at subwavelength scales. In this article, we investigate the laser dynamics in systems comprising subwavelength-structured cavities that incorporate organic dyes. To this end, we have developed a comprehensive theoretical framework able to accurately describe the interaction of organic molecules with any arbitrary photonic structure to produce single-mode lasing. The model provides explicit analytic expressions of the threshold and slope efficiency that characterize this class of lasers, and also the duration over which lasing action can be sustained before the dye photobleaches. Both the physical properties of the dyes and the optical properties of the cavities are considered. We also systematically studied the feasibility of achieving lasing action under continuous-wave excitation in optically pumped monolithic organic dye lasers. This study suggests routes to realize an organic laser that can potentially lase with a threshold of only a few W cm -2 . In conclusion, our work puts forward a theoretical formalism that could enable the advancement of nanostructured organic-based light emitting and sensing devices.

36 MATERIALS SCIENCE↗

Three-dimensional photonic crystals by large-area membrane stacking

We designed and analyzed a “mesh-stack” three-dimensional photonic crystal of a 12.4% bandgap with a dielectric constant ratio of 12:1. The mesh-stack consists of four offset identical square-lattice air-hole patterned membranes in each vertical period that is equal to the in-plane period of the square lattice. This design is fully compatible with the membrane-stacking fabrication method, which is based on alignment and stacking of large-area single-crystal membranes containing engineered defects. A bandgap greater than 10% is preserved as long as the membranes are subjected to in-plane misalignment less than 3% of the square period. By introducing a linear defect with a nonsymmorphic symmetry into the mesh-stack, we achieved a single-mode waveguide over a wide bandwidth.

36 MATERIALS SCIENCE↗

Evolution of sputtered tungsten coatings at high temperature

Sputtered tungsten (W) coatings were investigated as potential high temperature nanophotonic material to replace bulk refractory metal substrates. Of particular interest are materials and coatings for thermophotovoltaic high-temperature energy conversion applications. For such applications, high reflectance of the substrate in the infrared wavelength range is critical in order to reduce losses due to waste heat. Therefore, the reflectance of the sputtered W coatings was characterized and compared at different temperatures. In addition, the microstructural evolution of sputtered W coatings (1 and 5 μm thick) was investigated as a function of anneal temperature from room temperature to 1000 °C. Using in situ x-ray diffraction analysis, the microstrain in the two samples was quantified, ranging from 0.33% to 0.18% for the 1 μm sample and 0.26% to 0.20% for the 5 μm sample, decreasing as the temperature increased. The grain growth could not be as clearly quantified due to the dominating presence of microstrain in both samples but was in the order of 20 to 80 nm for the 1 μm sample and 50 to 100 nm for the 5 μm sample, as deposited. Finally, the 5 μm thick layer was found to be rougher than the 1 μm thick layer, with a lower reflectance at all wavelengths. However, after annealing the 5 μm sample at 900 °C for 1 h, its reflectance exceeded that of the 1 μm sample and approached that of bulk W found in literature. Overall, the results of this study suggest that thick coatings are a promising alternative to bulk substrates as a low cost, easily integrated platform for nanostructured devices for high-temperature applications, if the problem of delamination at high temperature can be overcome.

36 MATERIALS SCIENCE↗

Promotion of Water-mediated Carbon Removal by Nanostructured Barium Oxide/nickel Interfaces

The existing Ni-yttria-stabilized zirconia anodes in solid oxide fuel cells (SOFCs) perform poorly in carbon-containing fuels because of coking and deactivation at desired operating temperatures. Here we report a new anode with nanostructured barium oxide/nickel (BaO/Ni) interfaces for low-cost SOFCs, demonstrating high power density and stability in C{sub 3}H{sub 8}, CO and gasified carbon fuels at 750 C. Synchrotron-based X-ray analyses and microscopy reveal that nanosized BaO islands grow on the Ni surface, creating numerous nanostructured BaO/Ni interfaces that readily adsorb water and facilitate water-mediated carbon removal reactions. Density functional theory calculations predict that the dissociated OH from H2O on BaO reacts with C on Ni near the BaO/Ni interface to produce CO and H species, which are then electrochemically oxidized at the triple-phase boundaries of the anode. This anode offers potential for ushering in a new generation of SOFCs for efficient, low-emission conversion of readily available fuels to electricity.

30 DIRECT ENERGY CONVERSION↗

Lattice distortion in single crystal rare-earth arsenide/GaAs nanocomposites

Epitaxial single crystal nanocomposites comprised of rare-earth arsenide nanoparticles embedded in GaAs (001) layers produce a larger change in lattice parameter than expected from the lattice parameters of relaxed films. Despite similar cubic structures and lattice parameters, elongation of the interfacial bond length between the two materials induces additional strain causing an expansion in the nanocomposite lattice. The interface bond length is material dependent with an average atomic layer spacing at the ErAs:GaAs interface of 1.9 Å while the spacing at the ScAs:GaAs interface is only 1.4 Å. Implications for lattice matching various single crystal epitaxial nanostructures in semiconductors are discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Polarization-Driven Topological Insulator Transition in a GaN/InN/GaN Quantum Well

Topological insulator (TI) states have been demonstrated in materials with a narrow gap and large spin-orbit interactions (SOI). Here we demonstrate that nanoscale engineering can also give rise to a TI state, even in conventional semiconductors with a sizable gap and small SOI. Based on advanced first-principles calculations combined with an effective low-energy k∙p Hamiltonian, we show that the intrinsic polarization of materials can be utilized to simultaneously reduce the energy gap and enhance the SOI, driving the system to a TI state. The proposed system consists of ultrathin InN layers embedded into GaN, a layer structure that is experimentally achievable.

bio-inspired↗