Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “structural rings”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

Modeling of rolling element bearing mechanics. Theoretical manual

This report documents the theoretical basis for the Rolling Element Bearing Analysis System (REBANS) analysis code which determines the quasistatic response to external loads or displacement of three types of high-speed rolling element bearings: angular contact ball bearings; duplex angular contact ball bearings; and cylindrical roller bearings. The model includes the effects of bearing ring and support structure flexibility. It is comprised of two main programs: the Preprocessor for Bearing Analysis (PREBAN) which creates the input files for the main analysis program; and Flexibility Enhanced Rolling Element Bearing Analysis (FEREBA), the main analysis program. A companion report addresses the input instructions for and features of the computer codes. REBANS extends the capabilities of the SHABERTH (Shaft and Bearing Thermal Analysis) code to include race and housing flexibility, including such effects as dead band and preload springs.

Merchant, David H.↗
NASA NTRS1994

Optical imaging and high spatial resolution 21 cm H I observations of the peculiar galaxy NGC 2782 (Arp 215)

We have used the Very Large Array (VLA) B and C Arrays to make 21 cm H I observations of the peculiar galaxy NGC 2782 (Arp 215). These observations are complementary to previously published D Array VLA data, which revealed the presence of a long (5 min to 54 kpc) H I plume near the western side of this galaxy. We have also obtained BVRI H alpha images of the main body of this galaxy using the McDonald Observatory 30 inch telescope. The optical images of this galaxy show a strong stellar tail extending to the east, opposite the H I plume. Within the disk of NGC 2782, unsharp masking of the optical images at all 4 broadband wavelengths reveals three bright 'ripples', separated by approximately 15 sec. The light profiles across these ripples are symmetric, without a sharp outer edge. H alpha is strong at the starburst nucleus and along the northern and western sections of the inner ripple. The new higher resolution H I data show that the atomic gas is very clumpy. We have identified ten H I clumps in the long western plume, with H I masses of approximately 10(exp 8) solar mass, similar to those of dwarf galaxies, and column densities of approximately 10(exp 21) cm(exp -2) over surface areas of approximately 10 kpc(exp 2). No CO (1-0) emission has been detected from this plume, suggesting that it is material stripped from the outer edge of a disk galaxy. The H alpha peaks, in contrast, are generally not coincident with H I peaks. No H I is seen at the tip of the eastern extension. The H I distribution near this structure is ring-like rather than tail-like as in the optical data. We have detected redshifted H I absorption toward the central continuum source, indicating gas infall into the nuclear region. Using a restricted 3-body dynamical model, we have successfully reproduced the basic properties of NGC 2782 with an off-center collision between two galaxies, where a lower mass disk companion (M(sub 2)/M(sub 1) approximately 0.25) collides almost head-on with a larger disk galaxy. In this scenario, the companion becomes the eastern extension, and the long western tail is material pulled out from the larger galaxy. The lack of H I at the tip of the eastern tail may be due to stripping during the collision. Alternative formation scenarios include a merger or interaction between two disk galaxies, where the ripples may be due to a disturbed spiral density wave or galactic winds due to the central starburst.

Smith, Beverly J.↗
NASA NTRS1999

Cassini Radio Science Experiments on Saturn and Titan Preserved Because of Lewis Analysis

The Cassini mission to Saturn is an international venture with participation from NASA, the European Space Agency, and the Italian Space Agency. The Cassini spacecraft was launched from Cape Canaveral in October 1997 and is scheduled to arrive at Saturn in July 2004. After arrival, the spacecraft will orbit Saturn about 60 times over a period of 4 years. During this time, the Cassini Radio Science Subsystem will be used to investigate the atmosphere and rings of Saturn and the atmosphere of its largest moon, Titan--which is larger than Mercury and is the only moon in our solar system with a dense atmosphere. A critical component in Cassini s Radio Science Subsystem is a traveling-wave tube (TWT) that was designed at the NASA Lewis Research Center and built by Hughes Electronic Dynamics Division (ref. 1). This TWT will amplify downlink microwave signals at a frequency of 32 GHz for the Deep Space Network and will be involved in a number of experiments. These include occultation experiments in which the microwave signal will be beamed through rings and atmospheres toward Earth. Researchers will analyze the received signals to determine the sizes and distributions of the particles in the rings and the structure and composition of the atmospheres. The Radio Science Subsystem also will also be used to more accurately determine the mass and size of Saturn and its moons, to investigate the solar corona, and to search for gravity waves from outside the solar system.

Wilson, Jeffrey D.↗
NASA NTRS2012

Gas Debris Disks: A New Way to Produce Dust Patterns

Debris disks like those around Fomalhaut and Beta Pictoris show striking dust patterns often attributed to planets. But adding a bit of gas to our models of these disks--too little to detect-could alter this interpretation. Small amounts of gas lead to new dynamical instabilities that may mimic the narrow eccentric rings and other structures planets would create in a gas-free disk. rll discuss these phenomena and whether or not we can still use dust patterns as indicators of hidden exoplanets.

Kuchner, Marc J.↗
NASA NTRS2012

Patterns In Debris Disks: No Planets Required?

Debris disks like those around Fomalhaut and Beta Pictoris show striking dust patterns often attributed to hidden exoplanets. These patterns have been crucial for constraining the masses and orbits of these planets. But adding a bit of gas to our models of debris disks--too little gas to detect--seems to alter this interpretation. Small amounts of gas lead to new dynamical instabilities that may mimic the narrow eccentric rings and other structures planets would create in a gas-free disk. Can we still use dust patterns to find hidden exoplanets?

Kuchner, Marc↗
NASA NTRS2016

Modeling and Simulation of Trapping Mechanisms of Granular Media in Space

This paper describes the modeling and simulation of trapped granular media, within the context of the Granular Imager project. We describe the physics of trapped granular media in space, and the methodologies used to stably confine and shape such a medium using electromagnetic fields. The numerical models have also been validated with results in the literature, obtaining excellent agreement. The results of the numerical tests indicate that it is possible, with structural arrangements of rings and plates at different levels of electrostatic potential, to stably confine one or more charged particles, when driven by voltages that can be modulated in time and space.

Quadrelli, Marco B.↗
NASA NTRS1981

Discovery of multi-ring basins - Gestalt perception in planetary science

Early selenographers resolved individual structural components of multi-ring basin systems but missed the underlying large-scale multi-ring basin patterns. The recognition of multi-ring basins as a general class of planetary features can be divided into five steps. Gilbert (1893) took a first step in recognizing radial 'sculpture' around the Imbrium basin system. Several writers through the 1940's rediscovered the radial sculpture and extended this concept by describing concentric rings around several circular maria. Some reminiscences are given about the fourth step - discovery of the Orientale basin and other basin systems by rectified lunar photography at the University of Arizona in 1961-62. Multi-ring basins remained a lunar phenomenon until the fifth step - discovery of similar systems of features on other planets, such as Mars (1972), Mercury (1974), and possibly Callisto and Ganymede (1979). This sequence is an example of gestalt recognition whose implications for scientific research are discussed.

Hartmann, W. K.↗
NASA NTRS1981

The modification stage of basin formation - Conditions of ring formation

The impact cratering process may be divided into three stages, including a short high pressure phase of initial contact between the projectile and target, a longer cratering flow phase during which material is both ejected and displaced to form the transient crater, and a still longer modification phase during which the transient crater is modified into the final observed form. The present investigation is concerned with the nature of the modification stage as constrained by the initial boundary condition which comprises the transient crater and its surroundings, and the final boundary condition which comprises the structure of observed craters and basins. A brief description is provided of an interpretation of basin ring structure based on geophysical, geological, and dimensional analysis of craters and basins on the moon, Mercury, and Mars, on structural observations of terrestrial impact and explosion craters, and on an empirical crater restoration model. A scenario of basin formation is constructed, and relations of this scenario to observed morphology are discussed.

Croft, S. K.↗
NASA NTRS1985

Aerospace vehicle

A dual structure aerospace vehicle is described which has an aeroshell structure and an internally disposed separable and reusable integral tank/thrust structure. The tank/thrust structure is inuslated for cryogenic fuels and the cavity within aeroshell is insulated from the tank/thrust structure. An internal support ring within the cavity serves as an attachment for lugs on the tank/thrust structure via double hinges. The aft end of tank/thrust structure is provided with rocket engines and exit nozzles with a trunnion supporting the tank/thrust structure within the aeroshell.

Jackson, L. R.↗
NASA NTRS1977

Monte Carlo simulation of the jet stream process

A Monte Carlo model is formulated to simulate the orbital evolution of a system of colliding particles. It is found that inelastic collision alone (even if the impact energy dissipation from collision is very large) does not lead to the formation of a narrow ring-like jet stream; instead, a flat disk structure, similar to Saturn's rings, usually results. To produce the radial focusing effect, it is argued that additional dynamical effects, which would strengthen the collisional interaction between the particles in near-circular orbits, is needed.

Ip, W.-H.↗
NASA NTRS1982

Rings of Uranus - A review of occultation results

The structure and orbits of the nine confirmed rings of Uranus are reviewed based on occultation observations from ring discovery in March 1977 through April 1981. Observations of stellar occultations by Uranus have revealed the rings to be characterized by narrow widths (up to 100 km) and sharp edges, with possible internal structure, and to have orbits fitting the coplanar precession model, and showing a decreasing eccentricity with semimajor axis. Occultation results have also allowed the determination of the J2 and J4 coefficients of the Uranian gravity potential, the coordinates of the ring plane pole, planetary equatorial radius and ellipticity and the rotation period. The sharp edges and narrow widths of the rings may be explained by small satellites orbiting near the rings, and the uniform precession of three of the rings is attributed to self-gravity. Future plans for Uranus ring observations include further occultation studies, the Voyager 2 fly-by, and Space Telescope data.

Elliot, J. L.↗
NASA NTRS1981

Soft container for explosive nuts

Flexible fabric fits over variety of assembly shapes to contain debris produced by detonations or safety tests. Bag material is woven multifilament polyamide or aramid. Belt loops hold bag to clamp. Ring supports explosive nut structure and detonator wires, and after nut is mounted, bag and clamp are slipped over ring and fastened.

Glenn, D. C.↗
NASA NTRS1974

Interactive design of large end rings on stiffened conical shells using composites

Design study methods and results for a composite reinforced base ring for the conical aeroshell structure of the planetary lander vehicle for Project Viking, an unmanned mission to Mars, are presented. The aeroshell is a ring and stringer-stiffened conical shell structure having a half angle of 70 degrees with a large base ring mounted at the outer edge of the cone and a large pay-load ring in the interior with many smaller rings spaced along the inside shell surface. The purpose of the structure is to develop the aerodynamic drag required to decelerate the lander in the Mars atmosphere to facilitiate a soft landing. The design of a shell structure of this complexity requires the use of the latest technology available in a large general-purpose shell buckling program. The large general-purpose non-linear shell buckling program (BOSOR 2) which was used for this purpose is described.

Davis, R. C.↗
NASA NTRS1991

Structure and particle properties of Saturn's E Ring

The present systematic reanalysis of a substantial portion of extant photometric data on the Saturn E Ring has calibrated every observation on the basis of a common 3D model. A simple power-law model is found to describe the ring's normal optical depth profile with orbital radius; this trend is departed from, however, near the density peak, where there emerges a 30-percent localized decrease in thickness. No power-law size distribution is found to be compatible with available photometry. The peculiar size distribution points to a ring origin in a process that was not collisional or disruptive.

Showalter, Mark R.↗
NASA NTRS1996

Twist planet drive

A planetary gear system includes a sun gear coupled to an annular ring gear through a plurality of twist-planet gears, a speeder gear, and a ground structure having an internal ring gear. Each planet gear includes a solid gear having a first half portion in the form of a spur gear which includes vertical gear teeth and a second half portion in the form of a spur gear which includes helical gear teeth that are offset from the vertical gear teeth and which contact helical gear teeth on the speeder gear and helical gear teeth on the outer ring gear. One half of the twist planet gears are preloaded downward, while the other half are preloaded upwards, each one alternating with the other so that each one twists in a motion opposite to its neighbor when rotated until each planet gear seats against the sun gear, the outer ring gear, the speeder gear, and the inner ring gear. The resulting configuration is an improved stiff anti-backlash gear system.

Vranish, John M.↗
NASA NTRS2013

The NTF Inlet Guide Vanes Thermal Gradient Problem and Its Mitigation

The National Transonic Facility (NTF) utilizes Inlet Guide Vanes (IGV) to provide precise, quick response Mach number control for the tunnel. During cryogenic operations, the massive IGV structure can experience large thermal gradients, measured as "Delta T or (Delta)T", between the IGV ring and its support structure called the transfer case. If these temperature gradients are too large, the IGV structure can be stressed beyond its safety limit and cease operation. In recent years, (Delta)T readings exceeding the prescribed safety limits were observed frequently during cryogenic operations, particularly during model access. The tactical operation methods of the tunnel to minimize (Delta)T did not always succeed. One obvious option to remedy this condition is to warm up the IGV structure by disabling the main drive operation, but this "natural" warm up method can takes days in some cases, resulting in productivity loss. This paper documents the thermal gradient problem associated with the IGV structure during cryogenic operation and how the facility has recently achieved an acceptable mitigation which has resulted in improved efficiency of operations.

Venkat, Venki S.↗