Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “stitching”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

Mapping ice formation to mineral-surface topography using a micro mixing chamber with video and atomic-force microscopy

We developed a method for examining ice formation on solid materials under cloud-like conditions. Our experimental approach couples video-rate optical microscopy of ice formation with high-resolution atomic force microscopy (AFM) of the initial mineral surface. We demonstrate how colocating stitched AFM images with video microscopy can be used to relate the likelihood of ice formation to nanoscale properties of a mineral substrate, e.g., the abundance of surface steps of a certain height. We also discuss the potential of this setup for future iterative investigations of the properties of ice nucleation sites on materials.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

A New Reflected Target Optical Assessment System: Stage 1 Development Results

NREL has completed stage 1 development of an indoor optical measurement tool for fully assembled heliostats and single facets. This tool began as an indoor version of NREL’s outdoor Non-Intrusive Optical (NIO) measurement technique [1]. It uses similar techniques to other available tools (deflectometry, photogrammetry, etc.), but is designed to require very little infrastructure, labor, and time to set up and collect surface slope and canting measurements, making it a valuable tool for quality assurance and laboratory measurement of heliostat optics. It accomplishes this by using computer vision, photogrammetry, and multiple images stitched together to minimize the printed target size and required setup precision. This adaptable setup is useful for taking measurements at a variety of heliostat pointing angles, and for measuring fully assembled heliostats on the assembly line. In this paper, we describe the methodology behind the measurement system, present an initial analysis of its uncertainty and sensitivity, and compare it with established optical measurement systems.

Kesseli, Devon (ORCID:0000000193113036)↗
DOE OSTI2021

Processed Surface Imagery & Raster Imagery taken onboard TigerShark (U3) UAS

Land-surface orthomosaic imagery derived from the images collected using the Micasense Altum Imager on board the UAS TigerShark (U3) on March 11th, 2021 at an altitude of 2000 ft. The Altum takes images of the land surface across five visible bands and one long wave infrared thermal band. The photogrametry software Agisoft PhotoScan v 1.4 is used to align and stitch the images into a larger composet image using the technique of structure from motion image capture to construct a dense cloud and 3-D model of the surface, which is used to produce a digital elevation model of the terraine surveyed and orthomosaic imagery. This dataset contains the raster calculated orthomosaics of various vegetative indicies, which are used to indicate plant health and land surface characteristics, including Normalized Difference Vegetation Index (NDVI), Green Normalized Difference Vegetation Index (GNDVI), Normalized Difference Water Index (NDWI), surface temperature, and Enhanced_vegetation_index (EVI). These orthomosaics were collected west of the Starkville, MS, airport, and include natural, agricultural, and industrial land coverage. The images have a resolution of 0.2 m/pix.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2018

aafcammovie (a1)

Cameras are installed in the cockpit of ARM’s research aircraft looking forward and on some campaigns in the belly of the plane looking down at the ground. When a single camera is flown, the higher resolution P1347 camera is placed in the cockpit. Otherwise, it is positioned in the nadir and the P1344 camera is placed in the cockpit. Both cameras take one picture per minute, which are then stitched into a flight-long video providing context for the measurements taken on board. The forward camera shows if the plane is in cloud or clear air. The nadir camera shows the surface the aircraft is flying over, such as land, water, or cloud, to provide insight into factors affecting the on-board nadir radiometers. The images are useful for determining vegetation cover as well.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1974

Preparation for foam composites

Methods were developed for the fabrication of fire resistant panels utilizing polybenzimidazole (PBI) and Kerimid 601 resins along with glass, quartz, and Kevlar reinforcements. Stitched truss structure, both unfilled and filled with PBI foam, were successfully fabricated and tested. Second generation structures were then selected, fabricated, and tested, with a PBI/glass skin/PBI foam sandwich structure emerging as the optimum panel concept. Mechanical properties, smoke generation, and fire resistance were determined for the candidate panels.

Maximovich, M. G.↗
NASA NTRS1974

The NASA Ames integral aircraft passenger seat concept - A human engineering approach

A new NASA Ames concept for an aircraft passenger seat has been under research and development since 1968. It includes many human-factor features that will provide protection to the passenger from vibration, jostle, and high impact. It is comfortable and safer than any of the seats presently in use. An in-depth design, fabrication, and impact analysis was conducted in order to design a seat that will maximize passenger protection in high g impacts (20 g horizontal -Gx, 36 g vertical +Gz, 16 g lateral Gy). The method for absorbing impact energy was accomplished with a combination of stretching stainless steel cables, thread breaking of stitches, hydraulic mechanism and the special Temper Form cushions. The restraint system for the seat consisted of a lap belt and shoulder harness inertia reel combination.

Kubokawa, C. C.↗
NASA NTRS1980

Welding multiple plies with an electron beam

Method for electron-beam welding of multi-ply metal sheets eliminates ply separation and minimizes porosity. Method was developed for assembling bellows made of four plies of iron/nickel alloy sheets. Method consists of making successive stitch welds with electron beam until weld seam is completely filled in and all plies have been penetrated.

Kiluk, F. J.↗
NASA NTRS1978

Research study: Thermal curtain permeability and thermal response test for SRB reentry

Nine inch diameter samples of the material which will provide thermal and acoustic protection between the nozzle and outer skirt on the space shuttle solid rocket boosters were subjected to heating tests to determine the porosity of the material and the thermal response to a step change in heating. For the porosity measurements a steady state flow of air at 70 F, 500 F, and 1000 F was passed through a sample of the curtain material and measurements of the flow rates were made at different pressure drops across the sample. For the transient measurements, a sample of the curtain material was subjected to a step change in temperature as air was passed through the sample. Measurements of the heat flow through the sample were made as a function of time after the input of the heat pulse. The sample consisted of three layers of curtain panels. Each panel was made of combinations of quartz and fiberglass cloth between which a fiberfrax filler material had been stitched. The hardware design and test procedures were described. Data are provided in engineering units for the flow conditions and and temperatures at which measurements were conducted.

Fuller, C. E.↗
NASA NTRS1979

Beam builder for space fabrication

Construction of a beam builder for producing triangular truss aluminum beams for use on large space structures is described. The machine will fabricate 0.04 cm thick 2024-T3 aluminum alloy into beams weighing 1.265 kg-m with side braces spot-welded to end caps to fabricate a triangular truss configuration up to 305 m long. The design characteristics, the electrical subsystems, the power requirements of the spot welding equipment, and the computer system for coordinating the motion of the Yoder rolling mills for forming caps from aluminum coils are described. Spot welding was compared with ultrasonic welding, stapling, wire stitching, riveting, grommets, stamp-lok, and pierce and fold joining methods with respect to ease of operation, safety, practicality, and ease of energy consumption. The beam builder will be evaluated to identify design requirements which can be utilized for the space flight version of its concept.

Ehl, J. H.↗
NASA NTRS1982

Wind-Resistant Filler for Tile Gaps

Filler developed for gaps between insulating tiles on Space Shuttle finds application in industries that use tiles for thermal or environmental protection. Filler consists of tight-fitting ceramic tubes and fibrous alumina. Combination resists high wind loads while providing requisite heat protection. Quartz-thread stitching holds envelope together.

Bellavia, J.↗
NASA NTRS1983

AN-A46: LANDSAT scene-to-scene registration assessment

LANDSAT-4 MSS data and TM data for the 16 September 1982 scene were received. MSS data were reformatted and scene to scene registration, with previous MSS data is nearing completion. LANDSAT-2 to LANDSAT-2 MSS registration was completed. The results obtained serve as a baseline against which to compare the registrations containing LANDSAT-4 MSS. The TM data set as originally processed for the Orleans area had excessive yaw which exaggerated the forward/reverse scan pixal alignment, GSFC software was subsequently modified to minimize the problem. A detector stitching problem most pronounced in bodies of water was noted for TM channel 3 (0.63 micrometer to 0.69 micrometer).

Anderson, J. E.↗
NASA NTRS1984

High temperature performance of flexible thermal protection materials

Aero convective tests of several flexible thermal protection system (FTPS) concepts were conducted in the NASA Ames Research Center 20 MW arcjet aero heating wind tunnel. The concepts consisted of quilted insulation blankets with nextel AB312 felt insulation stitched between cover cloths with AB312 thread. The cover cloths were commercially available nextel AB312 and nicalon fabrics. The specimens were subjected to convective heat fluxes ranging from 7 to 35 Btu/per sq ft per sec at stagnation pressures of .005 to .02 atm. Specimens were tested both with and without transpiration cooling. Results indicated that both the nextel and nicalon fabrics offer the potential for higher temperature applications than current FTPS, and nicalon appears to be capable of withstanding temperatures well above 2500 degrees F with minimal degradation.

Savage, R. T.↗
NASA NTRS1988

Heavy-Duty Rescue Straps For Coveralls

New type of strap on coveralls helps rescuers lift victims of industrial accidents. Made of heavy twill. New material, 1 in. wide and has breaking strength of 600 lb, sewn to coveralls with polyester thread in box "X" stitching. Reinforcing nylon webbing, 1 3/4 in. wide sewn with strap at attachment points.

Waddell, Henry M.↗
NASA NTRS1989

Effects Of Twist On Ceramic Threads

Report describes study of effects of yarn twist and other manufacturing parameters on strength of ceramic sewing threads. Three types of thread considered; silica, aluminoborosilicate (ABS) with 14 percent boria, and ABS with 2 percent boria. For silica thread, best twist found 300 turns per meter. Produced highest break strength at temperatures up to about 540 degree C. Overall strengths of both ABS threads higher than silica thread. Threads used to stitch insulating blankets for reusable spacraft; must resist high temperatures and high aerodynamic loads of reentry into atmosphere of Earth.

Sawko, Paul M.↗
NASA NTRS1990

On-line in-situ control of the resin transfer molding process

Resin transfer molding of three-dimensionally stitched fabrics promises to be a cost effective process for obtaining composite parts of exceptional strength. The technique eliminates many problems involving prepreg preparation, storage and layup. It replaces, on the other hand, the single step cure process with a two-stage impregnation and cure process. Of particular importance therefore is selecting and controlling the viscosity during impregnation and cure. The use of in-situ frequency-dependent electromagnetic sensors and the Loos-Springer model for selecting and controllng the processing properties of the resin transfer molding resin during impregnation and cure are discussed.

Kranbuehl, D.↗
NASA NTRS1991

Silicon Carbide Threads For High-Temperature Service

New thread material outperforms silica. Sewing threads containing silicon carbide (SiC) yarn withstand temperatures of more than 1,100 degrees C. Intended for use in stitching thermally insulating blankets.

Sawko, Paul M.↗