Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “statistical modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
NASA NTRS1986

The effect of the dynamic wet troposphere on VLBI measurements

Calculations using a statistical model of water vapor fluctuations yield the effect of the dynamic wet troposphere on Very Long Baseline Interferometry (VLBI) measurements. The statistical model arises from two primary assumptions: (1) the spatial structure of refractivity fluctuations can be closely approximated by elementary (Kolmogorov) turbulence theory, and (2) temporal fluctuations are caused by spatial patterns which are moved over a site by the wind. The consequences of these assumptions are outlined for the VLBI delay and delay rate observables. For example, wet troposphere induced rms delays for Deep Space Network (DSN) VLBI at 20-deg elevation are about 3 cm of delay per observation, which is smaller, on the average, than other known error sources in the current DSN VLBI data set. At 20-deg elevation for 200-s time intervals, water vapor induces approximately 1.5 x 10 to the minus 13th power s/s in the Allan standard deviation of interferometric delay, which is a measure of the delay rate observable error. In contrast to the delay error, the delay rate measurement error is dominated by water vapor fluctuations. Water vapor induced VLBI parameter errors and correlations are calculated. For the DSN, baseline length parameter errors due to water vapor fluctuations are in the range of 3 to 5 cm. The above physical assumptions also lead to a method for including the water vapor fluctuations in the parameter estimation procedure, which is used to extract baseline and source information from the VLBI observables.

Treuhaft, R. N.↗
DOE OSTI2018

Using gap-filled MAIAC AOD and WRF-Chem to estimate daily PM 2.5 concentrations at 1 km resolution in the Eastern United States

To link short-term exposures of air pollutants to health outcomes, scientists must use high temporal and spatial resolution estimates of PM 2.5 concentrations. We develop a daily PM 2.5 product at 1 × 1 km 2 spatial resolution across the eastern United States (east of 90° W) with the aid of 1 × 1 km 2 MAIAC aerosol optical depth (AOD) data, 36 × 36 km 2 WRF-Chem output, 1 × 1 km 2 land-use type from the National Land Cover Database, and 0.125° × 0.125° ERA-Interim re-analysis meteorology. A gap-filling technique is applied to MAIAC AOD data to construct robust daily estimates of AOD when the satellite data are missing (e.g., areas obstructed by clouds or snow cover). The input data are incorporated into a multiple-linear regression model trained to surface observations of PM 2.5 from the EPA Air Quality System (AQS) monitoring network. The model generates a high-fidelity estimate (r 2 = 0.75 using a 10-fold random cross-validation) of daily PM 2.5 throughout the eastern United States. Of the inputs to the statistical model, WRF-Chem output (r 2 = 0.66) is the most important contributor to the skill of the model. MAIAC AOD is also a strong contributor (r 2 = 0.52). Daily PM 2.5 output from our statistical model can be easily integrated into county-level epidemiological studies. The novelty of this project is that we are able to simulate PM 2.5 in a computationally efficient manner that is constrained to ground monitors, satellite data, and chemical transport model output at high spatial resolution (1 × 1 km 2 ) without sacrificing the temporal resolution (daily) or spatial coverage (>2,000,000 km 2 ).

47 OTHER INSTRUMENTATION↗
NASA NTRS1983

Effects of preprocessing Landsat MSS data on derived features

Important to the use of multitemporal Landsat MSS data for earth resources monitoring, such as agricultural inventories, is the ability to minimize the effects of varying atmospheric and satellite viewing conditions, while extracting physically meaningful features from the data. In general, the approaches to the preprocessing problem have been derived from either physical or statistical models. This paper compares three proposed algorithms; XSTAR haze correction, Color Normalization, and Multiple Acquisition Mean Level Adjustment. These techniques represent physical, statistical, and hybrid physical-statistical models, respectively. The comparisons are made in the context of three feature extraction techniques; the Tasseled Cap, the Cate Color Cube. and Normalized Difference.

Parris, T. M.↗
NASA NTRS1991

The Marshall Engineering Thermosphere model atmosphere Statistical Analysis Mode (MET-SAM)

The minimum, mean, and maximum exospheric temperature on the globe were calculated for every three hour period from 1947 through 1989 using the algorithms in the Marshall Engineering Thermosphere (MET) model and the appropriate solar activity input parameters. Cumulative percent frequency (CPF) distributions were then calculated for each of these temperatures at five levels of solar activity as defined by the 13-month smoothed values of the 10.7-cm solar radio noise flux. Next, the 50, 95, 97.7, and 100 percentile temperature values in each of these five levels of solar activity were curve fit as a function of the 13-month smoothed 10.7-cm flux. The resulting algorithms are used to compute the exospheric temperature in the MET model instead of the technique developed by Jacchia in his 1970 model. These temperatures are then used to enter tables to determine the total mass density and/or the atomic oxygen number density for application to engineering problems. Users can specify the risk level they are willing to accept in the results of analyses that require neutral atmosphere parameters inputs. The model eliminates the guess work in how to combine the solar activity input parameters to insure that the results provide answers at the proper risk levels.

Smith, Robert E.↗
NASA NTRS1994

Sensitivity properties of a biosphere model based on BATS and a statistical-dynamical climate model

A biosphere model based on the Biosphere-Atmosphere Transfer Scheme (BATS) and the Saltzman-Vernekar (SV) statistical-dynamical climate model is developed. Some equations of BATS are adopted either intact or with modifications, some are conceptually modified, and still others are replaced with equations of the SV model. The model is designed so that it can be run independently as long as the parameters related to the physiology and physiognomy of the vegetation, the atmospheric conditions, solar radiation, and soil conditions are given. With this stand-alone biosphere model, a series of sensitivity investigations, particularly the model sensitivity to fractional area of vegetation cover, soil surface water availability, and solar radiation for different types of vegetation, were conducted as a first step. These numerical experiments indicate that the presence of a vegetation cover greatly enhances the exchanges of momentum, water vapor, and energy between the atmosphere and the surface of the earth. An interesting result is that a dense and thick vegetation cover tends to serve as an environment conditioner or, more specifically, a thermostat and a humidistat, since the soil surface temperature, foliage temperature, and temperature and vapor pressure of air within the foliage are practically insensitive to variation of soil surface water availability and even solar radiation within a wide range. An attempt is also made to simulate the gradual deterioration of environment accompanying gradual degradation of a tropical forest to grasslands. Comparison with field data shows that this model can realistically simulate the land surface processes involving biospheric variations.

Zhang, Taiping↗
NASA NTRS2015

Turbulent Concentration of mm-Size Particles in the Protoplanetary Nebula: Scale-Dependent Cascades

The initial accretion of primitive bodies (here, asteroids in particular) from freely-floating nebula particles remains problematic. Traditional growth-by-sticking models encounter a formidable "meter-size barrier" (or even a mm-to-cm-size barrier) in turbulent nebulae, making the preconditions for so-called "streaming instabilities" difficult to achieve even for so-called "lucky" particles. Even if growth by sticking could somehow breach the meter size barrier, turbulent nebulae present further obstacles through the 1-10km size range. On the other hand, nonturbulent nebulae form large asteroids too quickly to explain long spreads in formation times, or the dearth of melted asteroids. Theoretical understanding of nebula turbulence is itself in flux; recent models of MRI (magnetically-driven) turbulence favor low-or- no-turbulence environments, but purely hydrodynamic turbulence is making a comeback, with two recently discovered mechanisms generating robust turbulence which do not rely on magnetic fields at all. An important clue regarding planetesimal formation is an apparent 100km diameter peak in the pre-depletion, pre-erosion mass distribution of asteroids; scenarios leading directly from independent nebula particulates to large objects of this size, which avoid the problematic m-km size range, could be called "leapfrog" scenarios. The leapfrog scenario we have studied in detail involves formation of dense clumps of aerodynamically selected, typically mm-size particles in turbulence, which can under certain conditions shrink inexorably on 100-1000 orbit timescales and form 10-100km diameter sandpile planetesimals. There is evidence that at least the ordinary chondrite parent bodies were initially composed entirely of a homogeneous mix of such particles. Thus, while they are arcane, turbulent concentration models acting directly on chondrule size particles are worthy of deeper study. The typical sizes of planetesimals and the rate of their formation can be estimated using a statistical model with properties inferred from large numerical simulations of turbulence. Nebula turbulence is described by its Reynolds number Re = (L/eta)(exp 4/3), where L = H alpha(exp 1/2) is the largest eddy scale, H is the nebula gas vertical scale height, alpha the turbulent viscosity parameter, and eta is the Kolmogorov or smallest scale in turbulence (typically about 1km), with eddy turnover time t(sub eta). In the nebula, Re is far larger than any numerical simulation can handle, so some physical arguments are needed to extend the results of numerical simulations to nebula conditions. In this paper, we report new physics to be incorporated into our statistical models.

mm-size particles↗
NASA NTRS2019

On the Maximum Expected Electric Field in Electrically Small, Undermoded Enclosures

This paper reports the experimental validation of an improved statistical model for the prediction of maximum expected electric field in electrically small and under-moded enclosures. The aerospace community is interested in application of Hill's statistical models to design of avionics boxes for shielding effectiveness and for tailoring EMC test requirements for critical applications. However, it is observed that the probability distribution for mean-squared electric field in an electrically small enclosure differs from the exponential distribution which is widely used in reverberation chamber testing. It is postulated here that the difference is attributable to the under-moded character of the small enclosure.

Bremner, Paul↗
NASA NTRS2019

On the Maximum Expected Electric Field in Electrically Small, Undermoded Enclosures

This paper reports the experimental validation of an improved statistical model for the prediction of maximum expected electric field in electrically small and under-moded enclosures. The aerospace community is interested in application of Hill’s statistical models to design of avionics boxes for shielding effectiveness and for tailoring EMC test requirements for critical applications. However, it is observed that the probability distribution for mean-squared electric field (|E(sub x)|(exp 2)) in an electrically small enclosure differs from the exponential distribution which is widely used in reverberation chamber testing. It is postulated here that the difference is attributable to the under-moded character of the small enclosure. We will define “under-moded” as the condition where a single excitation frequency does not excite enough closely spaced resonant modes to achieve Hill’s assumption of an isotropic (or fully diffuse) plane wave field in the enclosure.

Bremner, P. G.↗
DOE OSTI2019

A hybrid point-particle force model that combines physical and data-driven approaches

Here this study improves upon the physics-based pairwise interaction extended point-particle (PIEP) model. The PIEP model leverages our physical understanding to predict fluid mediated interactions between solid particles. By considering the relative location of neighboring particles, the PIEP model is able to provide better predictions than existing drag models. While the current physical PIEP model is a powerful tool, its assumptions lead to increased error in flows with higher particle volume fractions. To reduce this error, a regression algorithm makes direct use of the results of direct numerical simulations (DNS) of an array of monodisperse solid particles subjected to uniform ambient flow at varying Reynolds numbers. The resulting statistical model and the physical PIEP model are superimposed to construct a hybrid, physics-based data-driven PIEP model. It must be noted that the performance of a pure data-driven approach without the model-form provided by the physical PIEP model is substantially inferior. The hybrid model's predictive capabilities are analyzed using additional DNS data that was not part of training the data-driven model. In every case tested, the hybrid models resulting from the regression were capable of (1) improving upon the physical PIEP model's prediction and (2) recovering underlying relevant physics from the DNS data. As the particle volume fraction increases, the physical PIEP model loses the ability to approximate the forces experienced by the particles, but the statistical model continues to produce accurate approximations.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2022

The Data Synergy Effects of Time-Series Deep Learning Models in Hydrology

When fitting statistical models to variables in geoscientific disciplines such as hydrology, it is a customary practice to stratify a large domain into multiple regions (or regimes) and study each region separately. Traditional wisdom suggests that models built for each region separately will have higher performance because of homogeneity within each region. However, each stratified model has access to fewer and less diverse data points. Here, through two hydrologic examples (soil moisture and streamflow), we show that conventional wisdom may no longer hold in the era of big data and deep learning (DL). We systematically examined an effect we call data synergy, where the results of the DL models improved when data were pooled together from characteristically different regions. The performance of the DL models benefited from modest diversity in the training data compared to a homogeneous training set, even with similar data quantity. Moreover, allowing heterogeneous training data makes eligible much larger training datasets, which is an inherent advantage of DL. A large, diverse data set is advantageous in terms of representing extreme events and future scenarios, which has strong implications for climate change impact assessment. The results here suggest the research community should place greater emphasis on data sharing.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Application of Linear Additive Conditions for Near-Infrared Diffuse Reflectance Absorption Spectroscopy

Determining the homogeneity of material mixing in real time during product processing is critical for quality control. According to the Kubelka–Munk (K-M) function of diffuse reflectance absorption spectrum, absorbance (A) is approximately linear with the content of the components when the sample scattering coefficient (S) is in a certain range. The S is determined by the particle size of powder samples. Therefore, this study determined particle size ranges that satisfy linear additivity in near-infrared diffuse reflectance spectroscopy (NIRDRS). Thus, the proposed NIRDRS analysis technique can be used to determine the homogeneity of material mixes or analyze the percentages of the components in the mixture. In this study, vitamin B3 and vitamin C were used for preparing mixed samples with varying percentages. The experimental results revealed that linear additivity is satisfied when the powder particle size is in the range of less than 280, 280–450, and 450–900 μm. When the confidence level is 0.01, the actual mixed spectra are not significantly different from the “simulated mixed spectra” constructed by linear addition, with their relative deviations less than 1.08%. The absolute errors of the actual and analytic percentages were within 2.98% for each component in the mixtures. The above conclusions also hold for sorghum, which has a complex material composition. Statistical models cannot analyze the percentages of components in the mixture. In contrast, linear addition and direct calibration approach avoids the use of a large number of samples for statistical modeling and analyze the percentages of mixed samples. Meanwhile, it can be used to discriminate and analyze the material mixing uniformity by building a mechanistic model.

Feng, Zhiyue↗
DOE OSTI2023

Grain size estimation in fluvial gravel bars using uncrewed aerial vehicles: A comparison between methods based on imagery and topography

Abstract Grain size assessments are necessary for understanding the various geomorphological, hydrological and ecological processes that occur within rivers. Recent research has shown that the application of Structure‐from‐Motion (SfM) photogrammetry to imagery from uncrewed aerial vehicles (UAVs) shows promise for rapidly characterising grain sizes along rivers in comparison to traditional field‐based methods. Here, we evaluated the applicability of different methods for estimating grain sizes in gravel bars along a study reach in the Olentangy River in Columbus, Ohio. We collected imagery of these gravel bars with a UAV and processed those images with SfM photogrammetry software to produce three‐dimensional point clouds and orthomosaics. Our evaluation compared statistical models calibrated on topographic roughness, which was computed from the point clouds, and to those based on image texture, which was computed from the orthomosaics. Our results showed that statistical models calibrated on image texture were more accurate than those based on topographic roughness. This might be because of site‐specific patterns of grain size, shape and imbrication. Such patterns would have complicated the detection of topographic signatures associated with individual grains. Our work illustrates that UAV‐SfM approaches show potential to be used as an accessible method for characterising surface grain sizes along rivers at higher spatial and temporal resolutions than those provided by traditional methods.

Wong, Tyler↗
NASA NTRS2015

Online Dectection and Modeling of Safety Boundaries for Aerospace Application Using Bayesian Statistics

The behavior of complex aerospace systems is governed by numerous parameters. For safety analysis it is important to understand how the system behaves with respect to these parameter values. In particular, understanding the boundaries between safe and unsafe regions is of major importance. In this paper, we describe a hierarchical Bayesian statistical modeling approach for the online detection and characterization of such boundaries. Our method for classification with active learning uses a particle filter-based model and a boundary-aware metric for best performance. From a library of candidate shapes incorporated with domain expert knowledge, the location and parameters of the boundaries are estimated using advanced Bayesian modeling techniques. The results of our boundary analysis are then provided in a form understandable by the domain expert. We illustrate our approach using a simulation model of a NASA neuro-adaptive flight control system, as well as a system for the detection of separation violations in the terminal airspace.

Statistics↗
DOE OSTI2022

How Bayesian methods can improve R -matrix analyses of data: The example of the d t reaction

The 3 H(d, n) 4 He reaction is of significant interest in nuclear astrophysics and nuclear applications. It is an important, early step in big-bang nucleosynthesis and a key process in nuclear fusion reactors. We use one- and two-level R-matrix approximations to analyze data on the cross section for this reaction at center-of-mass energies below 215 keV. We critically examine the data sets using a Bayesian statistical model that allows for both common-mode and additional point-to-point un- certainties. We use Markov Chain Monte Carlo sampling to evaluate this R-matrix-plus-statistical model and find two-level R-matrix results that are stable with respect to variations in the channel radii. The S factor at 40 keV evaluates to 25.36(19) MeV b (68% credibility interval). We discuss our Bayesian analysis in detail and provide guidance for future applications of Bayesian methods to R-matrix analyses. We also discuss possible paths to further reduction of the S-factor uncertainty.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
NASA NTRS2004

Novel Image Processing Interface to Relate DSB Spatial Distribution from Immunofluorescence Foci Experiments to the State-of-the-Art Models of DNA Breakage

A recently developed software (NASARadiationTrackImage) allows a quick and automatic segmentation of foci that indicate spatial localization of specific proteins that are visualized by immunofluorescence. Of interest are the spatial and temporal distribution of foci such as gammaH2AX, a signal of the phosphorylation of a variant of the histone H2A that has been shown to correspond to DSBs, or proteins involved in DSB processing, such as ATM, Rad51, and p53, following exposures of human cells to high charge and energy (HZE) ion irradiation. Experimental data are recorded as sets of two-dimensional images in color with cells and foci of gammaH2AX, ATM, Rad51 or others shown. Different cells, levels of radiation and timing after radiation were recorded. The software allows us to calculate the number of foci per cell, overall intensity of light in foci and their spatial organization. A simple statistical model allows for testing of foci overlap (eclipse). A more complex statistical model previously known as DNAbreak simulates track structure and random chromosome geometry. It has one adjustable parameter corresponding to an average intensity of DSB creation in cubic micrometers of DNA volume per particle track or unit dose. Its limitation is the low-resolution limit both in physical space and DSB's along DNA. It works adequately on the scale of a cell and provides further insights on how the geometry of tracks and DNA affects genomic damage of the cell and subsequent repair. Future developments of the model for the description of the time evolution of DNA damage response proteins, and more robust track structure models will be discussed.

Ponomarev, A. L.↗
DOE OSTI2021

A Binomial Stochastic Framework for Efficiently Modeling Discrete Statistics of Convective Populations

Abstract Understanding the coupling between convective clouds and the general circulation, as well as addressing the gray zone problem in convective parameterization, requires insight into the genesis and maintenance of spatial patterns in cumulus cloud populations. In this study, a simple toy model for recreating populations of interacting convective objects as distributed over a two‐dimensional Eulerian grid is formulated to this purpose. Key elements at the foundation of the model include i) a fully discrete formulation for capturing discrete behavior in convective properties at small population sample sizes, ii) object age‐dependence for representing life‐cycle effects, and iii) a prognostic number budget allowing for object interactions and co‐existence of multiple species. A primary goal is to optimize the computational efficiency of this system. To this purpose the object birth rate is represented stochastically through a spatially aware Bernoulli process. The same binomial stochastic operator is applied to horizontal advection of objects, conserving discreteness in object number. The applicability to atmospheric convection as well as behavior implied by the formulation is assessed. Various simple applications of the BiOMi model (Binomial Objects on Microgrids) are explored, suggesting that important convective behavior can be captured at low computational cost. This includes i) subsampling effects and associated powerlaw scaling in the convective gray zone, ii) stochastic predator‐prey behavior, iii) the downscale turbulent energy cascade, and iv) simple forms of spatial organization and convective memory. Consequences and opportunities for convective parameterization in next‐generation weather and climate models are discussed.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1995

Compilation and Analysis of 20- and 30-GHz Rain Fade Events at the ACTS NASA Ground Station: Statistics and Model Assessment

Since the beginning of the operational phase of the NASA Research Center's Advanced Communication Technology Satellite (ACTS), signal-fade measurements have been recorded at the NASA Ground Station located in Cleveland, Ohio, with the use of the 20- and 30-GHz beacon signals. Compilations of the daily data have been statistically analyzed on a monthly and yearly basis. Such analyses have yielded relevant parameters as (1) cumulative monthly and yearly probability distributions of signal attenuation by rain, (2) attenuation duration versus attenuation threshold probabilities, and (3) rate-of-fade probabilities. Not only are such data needed for a realistic data base to support the design and performance analysis of future satellite systems, but they are necessary to assess predictions made with the ACTS Rain Attenuation Prediction Model.

Manning, Robert M.↗