Results for “solution design” — Page 20

DOE OSTI2020

An efficient approach to explore the solution space of a wind turbine rotor design process

This study proposes a novel approach to explore the solution space of a wind turbine rotor design process. The goal is to offer to blade designers the possibility to select an optimal rotor for given market conditions, assessing trade-offs and alternatives in a matter of minutes. The design process consists of sequential aerodynamic-structural optimizations, where the two loops are linked via a blade-loading parameter that can be varied by the user. A design study is performed starting from the IEA Wind Task 37 land-based reference wind turbine. The solution space is characterized for rotor diameters in the range of 130–160 m, rated generator power values in the range of 3.0–6.0 MW, and tip-speed ratios in the range of 7.5–12.5. Results are discussed highlighting optimal design decisions and trade-offs.

17 WIND ENERGY↗

DOE OSTI2024

7th World Congress on Integrated Computational Materials Engineering (ICME 2023) (Final Technical Report)

Integrated Computational Materials Engineering (ICME) has received international attention due to its potential to shorten product development time, while lowering cost and improving design and manufacturing outcomes. ICME is an approach to designing materials solutions for specific applications that use computer modeling programs to predict the behavior of materials and integrate this information into the overall materials, processing, and manufacturing design cycle. The 7th World Congress on Integrated Computational Materials Engineering (ICME 2023) was held in Orlando, Florida from May 21–25, 2023 with the goal to convene stakeholders from across all areas of modeling and simulation, experimental specialization, and design, as well as from across academia, government, and industry, to address ICME tools and techniques and their integration, as well as to examine their application in engineering. This atmosphere facilitated rich interactions between the experimentalists, modelers, and computational and design, from academia, government, and industry, to discuss ICME tools and techniques and their application in engineering.

36 MATERIALS SCIENCE↗

NASA NTRS1992

An approximate viscous shock layer technique for calculating nonequilibrium hypersonic flows about blunt-nosed bodies

An approximate axisymmetric method has been developed which can reliably calculate nonequilibrium fully viscous hypersonic flows over blunt-nosed bodies. By substituting Maslen's second-order pressure expression for the normal momentum equation, a simplified form of the viscous shock layer (VSL) equations is obtained. This approach can solve both the subsonic and supersonic regions of the shock layer without a starting solution for the shock shape. This procedure is significantly faster than the parabolized Navier-Stokes and VSL solvers and would be useful in a preliminary design environment. Solutions have been generated for air flows over several analytic body shapes. Surface heat transfer and pressure predictions are comparable to VSL results. Computed heating rates are in good agreement with experimental data. The present technique generates its own shock shape as part of its solution, and therefore could be used to provide more accurate initial shock shapes for higher-order procedures which require starting solutions.

Cheatwood, F. M.↗

NASA NTRS1993

Analyzing Transonic Flow Over A Wing And Fuselage

TAWFIVE computer program calculates transonic flow over transport-type wing and fuselage. Combines multigrid acceleration technique in iterative solution of potential equation with use of integral-form boundary-layer equations to provide software tool computationally efficient, yet accurate enough for use in design. Simplifies solution process by breaking problem into loosely coupled set of modified equations. Inviscid-flow method, using standard inviscid-flow equations, valid in "outer" region away from wing, whereas boundary-layer equations valid in thin region near solid surface of wing. Written in FORTRAN 77.

Melson, N. Duane↗

NASA NTRS2003

Developments at the Advanced Design Technologies Testbed

A report presents background and historical information, as of August 1998, on the Advanced Design Technologies Testbed (ADTT) at Ames Research Center. The ADTT is characterized as an activity initiated to facilitate improvements in aerospace design processes; provide a proving ground for product-development methods and computational software and hardware; develop bridging methods, software, and hardware that can facilitate integrated solutions to design problems; and disseminate lessons learned to the aerospace and information technology communities.

VanDalsem, William R.↗

DOE OSTI2022

Membrane design for non-aqueous redox flow batteries: Current status and path forward

Redox flow batteries are promising technologies for large-scale, long-duration energy storage applications. Among them, non-aqueous redox flow batteries (NARFB) represent a transformative flow battery system since NARFBs potentially offer a higher energy density than aqueous flow batteries. However, many technical challenges remain for NARFBs, including the lack of high-performance membranes, low solubility of redox materials, and poor cycling efficiencies. Membranes serve a vital function in NARFBs, as they allow for selective ion transport while providing separation between the anolyte and catholyte. NARFB membrane development is an emerging research area, and this article reviews their design and critical factors that influence membrane properties, including solvent uptake, ion transport, and redox species permeability. A greater understanding of membrane behavior in non-aqueous solutions provides design principles for developing next-generation membranes for NARFB. In conclusion, we summarize the challenges, target metrics, and future perspectives for NARFBs.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

NASA NTRSDate not supplied

Designing Non-Pneumatic, Structural Tires for Space: Challenges and Solutions for a Difficult Application

Design and development of Shape Memory Alloy (SMA) Tires is a difficult and challenging problem. A “build and test” approach isn’t practical due to both the expense and time associated with taking such an approach. The multiple iterations that would be required to close requirements space for a space flight hardware program makes this approach infeasible. Hence, details regarding GRC’s SMA modeling approach to solving this challenging problem will be highlighted and used to showcase the power associated with leveraging an SMA modeling framework during design.

Shape Memory Alloys (SMA)↗

DOE OSTI2023

An Alternative to Solution Experiments for Nuclear Data Validation: Reflection and Interaction of Juxtaposed Uranium (RAIJU) Experiment Design

The need for solution experiments was thoroughly discussed at the recent NCERC (National Criticality Experiments Research Center) Futures Meeting in September 2022 for multiple applications including criticality safety, training, and nuclear data. However, this capability does not exist anywhere in the United States. NCERC, located at the Nevada National Security Site and operated by LANL (Los Alamos National Laboratory) is the only general-purpose critical experiments laboratory in the United States. However, solution experiments are not authorized at NCERC, and obtaining that authorization would be too time consuming and costly to happen in the foreseeable future. An alternative is needed – an experimental configuration with the homogeneity of liquid experiments, but without being a liquid. This project, Reflection and Interaction of Juxtaposed Uranium (RAIJU) will fill the gap in capability within LANL, the U.S. Department of Energy, and the international community and will support current and future nuclear material processing needs.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

DOE OSTI2021

Astrometric Membership Tests for the Zinn–Newell–Gibson UV-bright Stars in Galactic Globular Clusters

In 1972, Zinn, Newell, & Gibson (ZNG) published a list of 156 candidate UV-bright stars they had found in 27 Galactic globular clusters (GCs), based on photographs in the U and V bands. UV-bright stars lie above the horizontal branch (HB) and blueward of the asymptotic giant branch (AGB) and red giant branch in the clusters’ color–magnitude diagrams. They are in rapid evolutionary phases—if they are members and not unrelated bright foreground stars. The ZNG list has inspired numerous follow-up studies, aimed at understanding late stages of stellar evolution. However, the ZNG candidates were presented only in finding charts, and celestial coordinates were not given. Using my own collection of CCD frames in u and V, I have identified all of the ZNG objects, and have assembled their coordinates, parallaxes, and proper motions from the recent Gaia Early Data Release 3 (EDR3). Based on the Gaia astrometry, I have determined which objects are probable cluster members (45% of the sample). For the members, using photometry from EDR3, I have assigned the stars to various evolutionary stages, including luminous post-AGB stars, and stars above the HB. I point out several ZNG stars of special interest that have still, to my knowledge, never been studied in detail. This study is an adjunct to a forthcoming survey of the Galactic GCs in the uBVI photometric system, designed for detection of low-gravity stars with large Balmer discontinuities.

47 OTHER INSTRUMENTATION↗

NASA NTRSDate not supplied

End-To-End Uncertainty Quantification with Analytical Derivatives for Design Under Uncertainty

Uncertainty quantification (UQ) is a rapidly growing and evolving discipline, especially within the aerospace community. Performing analysis with UQ can provide decision makers with a wealth of information about a candidate design. However, the value of UQ is fully realized when the information gained during UQ analysis is leveraged in a feedback loop of a design optimization process, often referred to as design under uncertainty. Although design under uncertainty can be a powerful risk mitigation technique, there are a number of roadblocks that prevent its implementation. Two primary factors are computational costs and added complexity of the analysis. High fidelity simulations on the order tens of uncertain variables quickly become computationally infeasible. Also, implementing UQ into an existing multidisciplinary design and optimization (MDO) process often requires extensive knowledge of the UQ methods and careful treatment of the problem formulation. The objective of this work is to address these two primary roadblocks and enable practitioners to efficiently perform design under uncertainty with limited knowledge of the UQ discipline. Methods outlined in this paper demonstrate MDO incorporating UQ into the design process, leveraging an analytic derivative tool chain through the entire optimization. The proposed approach leverages machine learning techniques to generate a differentiable confidence interval output from polynomial chaos models. This technique, coupled with the incorporation of analytical derivatives through the Polynomial Chaos Expansion (PCE) process, eliminates the need to estimate derivatives which are usually obtained from finite difference, complex step, or similar methods. Developing a differentiable confidence interval allows mixed uncertainty problems (both epistemic and aleatory) to be modeled. Without such modeling, these problems cannot accurately predict objective functions containing statistical quantities such as mean and variance. The addition of analytic derivatives to a polynomial chaos-based UQ method decreases the computational costs of performing design under uncertainty by orders of magnitude in comparison with methods such as complex step. The method and codes developed are modular in nature and are a drop-in solution for design under uncertainty within existing MDO problems. A low-fidelity analytical multidisciplinary optimization under uncertainty for a wing design in OpenMDAO is detailed in this paper. This demonstration case will include both objective functions and constraints which are influenced by uncertain parameters.

Ben D Phillips↗

NASA NTRSDate not supplied

End-To-End Uncertainty Quantification with Analytical Derivatives for Design Under Uncertainty

Uncertainty quantification (UQ) is a rapidly growing and evolving discipline, especially within the aerospace community. Performing analysis with UQ can provide decision makers with a wealth of information about a candidate design. However, the value of UQ is fully realized when the information gained during UQ analysis is leveraged in a feedback loop of a design optimization process, often referred to as design under uncertainty. Although design under uncertainty can be a powerful risk mitigation technique, there are a number of roadblocks that prevent its implementation. Two primary factors are computational costs and added complexity of the analysis. High fidelity simulations on the order tens of uncertain variables quickly become computationally infeasible. Also, implementing UQ into an existing multidisciplinary design and optimization (MDO) process often requires extensive knowledge of the UQ methods and careful treatment of the problem formulation. The objective of this work is to address these two primary roadblocks and enable practitioners to efficiently perform design under uncertainty with limited knowledge of the UQ discipline. Methods outlined in this paper demonstrate MDO incorporating UQ into the design process, leveraging an analytic derivative tool chain through the entire optimization. The proposed approach leverages machine learning techniques to generate a differentiable confidence interval output from polynomial chaos models. This technique, coupled with the incorporation of analytical derivatives through the Polynomial Chaos Expansion (PCE) process, eliminates the need to estimate derivatives which are usually obtained from finite difference, complex step, or similar methods. Developing a differentiable confidence interval allows mixed uncertainty problems (both epistemic and aleatory) to be modeled. Without such modeling, these problems cannot accurately predict objective functions containing statistical quantities such as mean and variance. The addition of analytic derivatives to a polynomial chaos-based UQ method decreases the computational costs of performing design under uncertainty by orders of magnitude in comparison with methods such as complex step. The method and codes developed are modular in nature and are a drop-in solution for design under uncertainty within existing MDO problems. A low-fidelity analytical multidisciplinary optimization under uncertainty for a wing design in OpenMDAO is detailed in this paper. This demonstration case will include both objective functions and constraints which are influenced by uncertain parameters.

Ben Phillips↗

NASA NTRSDate not supplied

Electric Sail Design Sensitivities

Electric Sails (E-Sails) are a promising propulsion technology that seek to enable high characteristic propellentless acceleration for spacecraft to reach distant and/or difficult to reach orbits such as rapid transit to heliopause. The E-Sail system exchanges momentum by using positively charged electrostatic tethers to repel solar wind photons to push it through space. This concept was first theorized by Pekka Janhunen in 2004 with further developments occurring including a NASA Innovative Advanced Concepts Phase 1 and Phase 2 hosted out of NASA’s Marshall Space Flight Center (MSFC). These developments led to further maturation of the overall system, and this paper is designed to help identify different design sensitivities of an integrated Electric Sail system. To approach this, a small team at MSFC took an in-house developed three degrees of freedom (3DoF) simulation tool and a trajectory modelling tool to look at different design parameters and to determine a potential ideal E-Sail configuration. An E-Sail system has different design architectures including a barbell design, hub and spoke design, and a potential hybrid solution. The barbell design features two equally massed satellites that spin around a central point in the tether system. The hub and spoke design features a large central spacecraft with small end spacecraft to aid in formation control of the overall E-Sail system. Leveraging elements from both the hub and spoke, and barbell design, a hybrid option exists where one could have a larger central mass and one or two tethers extended to a smaller end mass [2]. In summary, the hub and spoke design is the ideal configuration for E-Sail with tethers spanning kilometers to achieve the designed design characteristic acceleration of at least one mm/s2 with this architecture being the focus of this study. Different key design parameters were varied as part of this study. These parameters include the total number of tethers, the length of the tethers, spin rate, relative spacecraft mass, tether voltage, inertia per tether, and impact of slew rate changes. These results started from an internal MSFC technology demonstration mission design and then the parameters were varied with engineering judgement to ensure that the results were consistent with expected results. These were varied in the MSFC 3DoF tool and compared to baseline results to generate a candidate ideal E-Sail design system. These results were then used to help inform the mission analysis design for the system. The 3DoF trajectory optimization was performed in the Astrodynamics and Space Science Enabling Toolbox (ASSET) and utilized collocation optimization of control vector pointing with the objective function being transfer duration. A representative model of the E-Sail force was derived as a function of the Sun-pointing vector direction. This model was initialized with a zero Sun Incidence Angle (SIA) trajectory for the initial guess generation, then with a portion of the mission optimized SIA time history for fast outbound transfers. After the trajectory is hyperbolic relative to a heliocentric frame, the SIA is maintained at 0 degrees except for any needed trajectory correction maneuvers. This trajectory optimization looked at different characteristic acceleration values to analyze the impact it had on mission performance. As a result of this study, the team can best inform mission designers and technology development efforts to mature the E-Sail system. This study will allow mission designers to have defined rules-of-thumb to design an E-Sail system to meet desired mission needs as well as providing several sample mission profiles. These design drivers will inform maturation efforts on which design requirements to consider for an integrated E-Sail design.

E-Sail↗

NASA NTRS1982

A rapid blade-to-blade solution for use in turbomachinery design

A rapid technique for solving the blade-to-blade turbomachinery flow problem was developed. Approximate governing flow equations, which include the effects of compressibility, radius change, rotation, and variable stream sheet thickness are solved using a panel method. The development and solution of these equations are described. Sample calculations are presented to illustrate the method's capabilities and accuracy.

Mcfarland, E. R.↗

NASA NTRS1984

A rapid blade-to-blade solution for use in turbomachinery design

A rapid technique for solving the blade-to-blade turbomachinery flow problem was developed. Approximate governing flow equations, which include the effects of compressibility, radius change, rotation, and variable stream sheet thickness are solved using a panel method. The development and solution of these equations are described. Sample calculations are presented to illustrate the method's capabilities and accuracy. Previously announced in STAR as N83-13077

Mcfarland, E. R.↗

NASA NTRS1990

Conceptual design of a closed loop nutrient solution delivery system for CELSS implementation in a micro-gravity environment

Described here are the results of a study to develop a conceptual design for an experimental closed loop fluid handling system capable of monitoring, controlling, and supplying nutrient solution to higher plants. The Plant Feeder Experiment (PFE) is designed to be flight tested in a microgravity environment. When flown, the PFX will provide information on both the generic problems of microgravity fluid handling and the specific problems associated with the delivery of the nutrient solution in a microgravity environment. The experimental hardware is designed to fit into two middeck lockers on the Space Shuttle, and incorporates several components that have previously been flight tested.

Schwartzkopf, Steven H.↗

DOE OSTI2023

Fracture‐Resistant and Thermally Insulating Ultrahigh‐Temperature Carbide Foams

Dense ultrahigh‐temperature ceramics (UHTCs) carbides are recognized as potential materials for thermal protection systems (TPS) owing to properties beyond existing structural materials’ capabilities. Recent advances in UHTCs have enabled the development of multiscale porous microstructures. Herein, it is highlighted that the porosity in UHTCs are no longer treated as a defect but as a functional property specifically tailored for thermal insulation. It is a promising solution to design and fabricate bulk UHTC foams via a freeze‐drying (FD) approach followed by calibrated pressureless spark plasma sintering. Herein, monolithic TaC and HfC UHTC foams and their composite show the partial solid–solution formation of (Ta, Hf)C with porosity ≥50%. TaC–HfC foam (≈80–92 N) shows an intermediate load‐bearing capability compared to monolithic TaC (≈120–135 N) and HfC (≈28–35 N) foams, with no evident cracking on the sample surface. The thermal conductivity of partial solid‐solution TaC–HfC foam increases up to fivefold compared to parent UHTC foams. In the results, solid solutions’ efficacy and pores’ unidirectionality in providing thermal insulation to TaC–HfC while maintaining its high‐load bearing capability are illustrated. In conclusion, the developed technique establishes a new paradigm shift in UHTCs, expanding their potential for TPS in extreme environments.

36 MATERIALS SCIENCE↗

NASA NTRS2008

The Governor's Challenge: "Building a Stronger Virginia Today": Transportation Visions and Solutions

Using STM(Science, Technology, Engineering, Math) education, this emerging workforce will have the chance to creatively solve one of Virginia's biggest challenges: TRANSPORTATION. - Students will be asked to develop alternative transportation systems for the state. This competition will enable teams to work with business mentors to design creative solutions for regional gridlocks and develop other transportation systems to more easily and expediently reach all parts of the Commonwealth.

Baker, Susan↗

DOE OSTI2021

Vacuum system design, construction, and operation for the Cornell High Energy Synchrotron Source upgrade

During the summer and fall 2018, the Cornell High Energy Synchrotron Source (CHESS), underwent an upgrade that recast the facility as primarily a low emittance X-ray source. The upgrade replaced one sixth of the Cornell Electron Storage Ring (CESR) with six double-bend achromats, featuring four novel CHESS Compact Undulator (CCU) insertion devices, and switched CESR to single particle beam operation. At the time of this writing, the upgraded storage ring has achieved the CHESS-U design goal of operating with 200 mA of positron current at 6.0 GeV beam energy. Additionally, seven out of eleven CHESS-U beamlines are currently in X-ray user operation. The construction and the commissioning of the new section of the CESR accelerator required novel solutions to design, fabrication, and vacuum system operations. Significant design considerations and efforts were made to minimize X-ray ‘dark-time’, returning to operation less than 1 year. This paper describes the important milestones of the process, the solutions implemented, and the present status of CHESS-U.

43 PARTICLE ACCELERATORS↗