Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “solar physics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Atomic masses with machine learning for the astrophysical r process

The astrophysical r process plays a vital role in the production of heavy elements. Modeling of the r process is sensitive to masses and further requires knowledge of masses beyond current experimental reach. Therefore, simulations of the r process offer a unique test bed for predicting mass extrapolations. We take a Machine-Learning (ML) approach to model the masses across the entire chart of nuclides. For the first time, we simulate r-process nucleosynthesis with a physics-based ML mass model. We compare simulated abundances to solar data in order to evaluate the model's performance far from stability. The resulting r-process abundances up to thorium and uranium qualitatively match those of the observed solar system abundance pattern, with the characteristic peaks well positioned. We propagate the mass uncertainties obtained from the ML model to r-process abundance yields to estimate an uncertainty band associated with our approach. The size of the uncertainty band is approximately one order of magnitude which aligns with the uncertainty reported using alternative techniques.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

A series of four-coordinate heteroleptic copper(I) complexes with diimine and β-diketiminate ligands

In this paper, a series of heteroleptic bis-chelate copper(I) complexes of the general formula Cu(N^N)(NacNac R ), where N^N is the diimine ligand and NacNac R is the β-diketiminate ligand are introduced. The complexes are easily prepared by reacting NacNac ligands with CuO t Bu in the presence of diimine ligands. The molecular structures of all complexes are characterized by NMR spectroscopy and X-ray crystallography. The studies of cyclic voltammetry and UV–vis absorption spectra show that the HOMO and the LUMO energy level can be tailored by changing the substitution pattern of each ligand. The oxidation potential is dependent on the NacNac ligand, and the reduction potential shows the dependence on the diimine ligand. In conclusion, tunable redox potentials and a wide range of visible absorption can make these copper(I) complexes promising candidates for applications in solar light harvesting.

14 SOLAR ENERGY↗
DOE OSTI2022

Controlling Symmetry Breaking Charge Transfer in BODIPY Pairs

Symmetry breaking charge transfer (SBCT) is a process in which a pair of identical chromophores absorb a photon and use its energy to transfer an electron from one chromophore to the other, breaking the symmetry of the chromophore pair. This excited state phenomenon is observed in photosynthetic organisms where it enables efficient formation of separated charges that ultimately catalyze biosynthesis. SBCT has also been proposed as a means for developing photovoltaics and photocatalytic systems that operate with minimal energy loss. It is known that SBCT in both biological and artificial systems is in part made possible by the local environment in which it occurs, which can move to stabilize the asymmetric SBCT state. However, how environmental degrees of freedom act in concert with steric and structural constraints placed on a chromophore pair to dictate its ability to generate long-lived charge pairs via SBCT remain open topics of investigation. In this work we compare a broad series of dipyrrin dimers that are linked by distinct bridging groups to discern how the spatial separation and mutual orientation of linked chromophores and the structural flexibility of their linker each impact SBCT efficiency. Across this material set, we observe a general trend that SBCT is accelerated as the spatial separation between dimer chromophores decreases, consistent with the expectation that the electronic coupling between these units varies exponentially with their separation. However, one key observation is that the rate of charge recombination following SBCT was found to slow with decreasing interchromophore separation, rather than speed up. This stems from an enhancement of the dimers’ structural rigidity due to increasing steric repulsion as the length of their linker shrinks. This rigidity further inhibits charge recombination in systems where symmetry has already enforced zero HOMO-LUMO overlap. Additionally, for the forward transfer the active torsion is shown to increase LUMO-LUMO coupling, allowing for faster SBCT within bridging groups. Further, by understanding trends for how rates of SBCT and charge recombination depend on a dimer’s internal structure and their environment, we identify design guidelines for creating artificial systems for driving sustained light-induced charge separation. Such systems can find application in solar energy technologies and photocatalytic applications but can serve as a model for light-induced charge separation in biological systems.

14 SOLAR ENERGY↗
DOE OSTI2023

Orientational Order in Spin-Cast Lead-Iodide Perovskite Nanocrystal Solids

Combined synthetic control over size and composition renders colloidal lead-halide perovskite nanocrystals a tunable platform for high-efficiency optoelectronic applications. However, the properties and operational stability of devices based on nanocrystal solids are often dictated by the method of the evaporation-induced assembly. Ubiquitous slow evaporation techniques can produce highly ordered nanocrystal domains but limit the prospects for scalable fabrication of continuous device layers, calling for investigation of approaches to more rapidly form ordered perovskite nanocrystal solids. Here, we study orientationally ordered lead-iodide perovskite nanocrystal solids prepared by conventional spin coating with molecular additives (excess ligand) to enhance ordering within the arrays. In situ X-ray scattering measurements reveal that orientational ordering occurs rapidly upon solvent removal during spin coating and can be further enhanced by manipulating the spin speed. We vary the additive ligand length and explore trade-offs between ordering and layered perovskite impurity formation. Arrays treated with the intermediate-length octylamine ligand exhibit increased in-plane electronic conductivity, suggesting orientational ordering and internanocrystal electronic coupling can be enhanced by the treatment. In conclusion, these results highlight the prospects of establishing long-range order in lead-halide perovskite nanocrystal solids by using simple and fast coating methods.

14 SOLAR ENERGY↗
DOE OSTI2023

Distribution of Copper States, Phases, and Defects across the Depth of a Cu-Doped CdTe Solar Cell

Copper has been used as a p-type dopant in cadmium telluride (CdTe) for decades. However, the density of Cu atoms in the finished device is much higher than that of holes, which means that most Cu atoms are not activated as acceptors during incorporation. Furthermore, studies have demonstrated that the distribution of copper (Cu) atoms across the device is highly inhomogeneous, with reports citing Cu substitution on Cd sites and segregation to grain boundaries. Fast diffusion along these boundaries and Cu accumulation at the CdTe/CdS interface have also been observed and validated computationally. These levels of inhomogeneity make it difficult to accurately characterize and correlate the performance with the nature of the Cu atomic species present. To address this challenge, we utilize X-ray microscopy and, specifically, nanoscale fluorescence-mode X-ray absorption near-edge structure to resolve the atomic Cu environment throughout the depth of the CdTe layer. Our results suggest that the majority of Cu atoms are in the form of Cu x Te phases (or similar local environments) near the ZnTe|CdTe interface, Cu x O phases in the CdTe absorber, and present in various oxidation states, including Cu 1+ and Cu 2+ , near the CdS/CdTe junction. Here this work also provides experimental evidence for the first time of the presence of CuS around the ZnTe|CdTe interface and the hypothesized Cu Cd -Cl i complex in the CdTe absorber.

14 SOLAR ENERGY↗
DOE OSTI2024

A-Site Cation Chemistry in Halide Perovskites

Metal halide perovskites are an important class of semiconductors now being implemented as photovoltaic absorbers and explored for light emission, among other device applications. The semiconducting properties of halide perovskites are deeply intertwined with their composition and structure. Specifically the symmetry, tilting, and distortions of the metal halide octahedra impact the band structure and other optoelectronic properties. In this review, we examine the various compositions of monovalent A-site cations in threedimensional (3D) halide perovskites AMX 3 (M = divalent metal; X = halide). We focus on how the A-site cation templates the inorganic metal-halide perovskite framework, resulting in changes in the crystal structure symmetry, as well as M–X bonding parameters, summarized in a comprehensive table of AMX 3 structures. The A-site cation motion, effects of alloying, and 2D Ruddlesden–Popper perovskite structures with unique A-site cations are further overviewed. Correlations are shown between these A-site cation dominated structural parameters and the resulting optoelectronic properties such as band gap. This review should serve as a reference for the A-site cation structural chemistry of metal halide perovskites and inspire continued research into less explored metal halide perovskite compositions and structures.

14 SOLAR ENERGY↗
DOE OSTI2023

Synthesis and Surface Attachment of Molecular Re(I) Complexes Supported by Functionalized Bipyridyl Ligands

Eleven 2,2'-bipyridine (bpy) ligands functionalized with attachment groups for covalent immobilization on silicon surfaces were prepared. Five of the ligands feature silatrane functional groups for attachment to metal oxide coatings on the silicon surfaces, while six contain either alkene or alkyne functional groups for attachment to hydrogen-terminated silicon surfaces. The bpy ligands were coordinated to Re(CO) 5 Cl to form complexes of the type Re(bpy)(CO) 3 Cl, which are related to known catalysts for CO 2 reduction. Six of the new complexes were characterized using X-ray crystallography. As proof of principle, four molecular Re complexes were immobilized on either a thin layer of TiO 2 on silicon or hydrogen-terminated silicon. The surface-immobilized complexes were characterized using X-ray photoelectron spectroscopy, IR spectroscopy, and cyclic voltammetry (CV) in the dark and for one representative example in the light. The CO stretching frequencies of the attached complexes were similar to those of the pure molecular complexes, but the CVs were less analogous. For two of the complexes, comparison of the electrocatalytic CO 2 reduction performance showed lower CO Faradaic efficiencies for the immobilized complexes than the same complex in solution under similar conditions. In particular, a complex containing a silatrane linked to bpy with an amide linker showed poor catalytic performance and control experiments suggest that amide linkers in conjugation with a redox-active ligand are not stable under highly reducing conditions and alkyl linkers are more stable. So a conclusion of this work is that understanding the behavior of molecular Re catalysts attached to semiconducting silicon is more complicated than related complexes, which have previously been immobilized on metallic electrodes.

14 SOLAR ENERGY↗
DOE OSTI2023

Sterically Encumbered Heteroleptic Copper(I) β-Diketiminate Complexes with Extended Excited-State Lifetimes

One of the main challenges in developing effective copper(I) photosensitizers is their short excited-state lifetimes, usually attributed to structural distortion upon light excitation. We have previously introduced copper(I) charge-transfer chromophores of the general formula Cu(N^N)(ArNacNac), where N^N is a conjugated diimine ligand and ArNacNac is a substituted β-diketiminate ligand. These chromophores were promising regarding their tunable redox potentials and intense visible absorption but were ineffective as photosensitizers, presumably due to short excited-state lifetimes. Here, we introduce sterically crowded analogues of these heteroleptic chromophores with bulky alkyl substituents on the N^N and/or ArNacNac ligand. Structural analysis was combined with electrochemical and photophysical characterization, including ultrafast transient absorption (UFTA) spectroscopy to investigate the effects of the alkyl groups on the excited-state lifetimes of the complexes. The molecular structures determined by single-crystal X-ray diffraction display more distortion in the ground state as alkyl substituents are introduced into the phenanthroline or the NacNac ligand, showing smaller τ 4 values due to the steric hindrance. UFTA measurements were carried out to determine the excited-state dynamics. Sterically encumbered Cu5 and Cu6 display excited-state lifetimes 15–20 times longer than unsubstituted complex Cu1, likely indicating that the incorporation of bulky alkyl substituents inhibits the pseudo-Jahn–Teller (PJT) flattening distortion in the excited state. Furthermore, this work suggests that the steric properties of these heteroleptic copper(I) charge-transfer chromophores can be readily modified and that the excited-state dynamics are strongly responsive to these modifications.

14 SOLAR ENERGY↗
DOE OSTI2025

Electron-Donating para -Substituent (X) Enhances the Water Oxidation Activity of the Catalyst Ru(4'-X-terpyridine)(phenanthroline-SO 3 ) +

Recently, our group has developed a Ru-based water oxidation catalyst (WOC) with pendant sulfonate (1, Ru(4'-X-terpyridine)(phenanthroline-SO 3 )OTf (X = H, 1a) that shows high activity under both sacrificial oxidant (CAN, Ce(NH 4 ) 2 (NO 3 ) 6 , Ce IV ) and electrocatalytic conditions, in both acidic and neutral media. Here, we demonstrate that the functionalization of the 4'-X-terpyridine ligand with an electron-donating substituent X = OEt (1b) makes potentials of Ru II /Ru III redox catalysis more negative, whereas when X = NO 2 (1c) and CF 3 (1d), potentials are more positive. For 1b, full conversion of the sacrificial oxidant Ce IV occurred in 0.4 h (7 h for 1a), with an initial rate of 2.07 μmol O 2 s –1 and a turnover frequency of 7.6 s –1 , which is 30-fold faster than that for 1a at [cat] 0 = 20 μM. Under electrocatalytic conditions, water oxidation by 1b is three times faster than that by the parent catalyst 1a at close to the same potential. Extensive computations have identified differences in the initial PCET steps of the water oxidation by catalysts 1a, 1b, and 1d, and demonstrated the increased probability of the O 2 formation via the oxide relay pathway in the order 1b< 1a < 1d.

14 SOLAR ENERGY↗
DOE OSTI2021

Ruthenium Dye Excitations and Relaxations in Natural Sunlight

Solar harvesting devices using dyes convert the sun's energy to usable forms. The photophysics involved are generally investigated using time-resolved spectroscopic experiments with femtosecond to nanosecond resolution. We show that a kinetic framework constructed from transient and linear absorption measurements of metal-ligand charge transfer states for a set of ruthenium complexes in solution can be used to simulate the steady-state dynamics of dyes adsorbed on a substrate under diffuse solar radiation. Even though the intensity of sunlight is relatively low, double excitations to higher excited states can occur. The steady-state populations show that the dyes' triplet state is the main species present besides the ground state. While small, these persistent excited populations can influence reactivity over the extended periods of time that the systems operate. The results show that non-radiative and optical events (dye -1 s -1 ) within the singlet manifold and from the triplet state exhibit a dependence on ligand substituents.

14 SOLAR ENERGY↗
DOE OSTI2024

Homomolecular Triplet–Triplet Annihilation in Metalloporphyrin Photosensitizers

Metalloporphyrins are ubiquitous in their applications as triplet photosensitizers, particularly for promoting sensitized photochemical upconversion processes. In this study, bimolecular excited state triplet–triplet quenching kinetics, termed homomolecular triplet–triplet annihilation (HTTA), exhibited by the traditional triplet photosensitizers–zinc(II) tetraphenylporphyrin (ZnTPP), palladium(II) octaethylporphyrin (PdOEP), platinum(II) octaethylporphyrin (PtOEP), and platinum(II) tetraphenyltetrabenzoporphyrin (PtTPBP)–were revealed using conventional transient absorption spectroscopy. Nickel(II) tetraphenylporphyrin was used as a control sample as it is known to be rapidly quenched intramolecularly through ligand-field state deactivation and, therefore, cannot result in triplet–triplet annihilation (TTA). The single wavelength transients associated with the metalloporphyrin triplet excited state decay–measured as a function of incident laser pulse energy in toluene–were well modeled using parallel first- and second-order kinetics, consistent with HTTA being operable. The combined transient kinetic data enabled the determination of the first-order rate constants (k T ) for excited triplet decay in ZnTPP (4.0 × 10 3 s –1 ), PdOEP (3.6 × 10 3 s –1 ), PtOEP (1.2 × 10 4 s –1 ), and PtTPBP (2.1 × 10 4 s –1 ) as well as the second-order rate constant (k TT ) for HTTA in ZnTPP (5.5 × 10 9 M –1 s –1 ), PdOEP (1.1 × 10 10 M –1 s –1 ), PtOEP (7.1 × 10 9 M –1 s –1 ), and PtTPBP (1.6 × 10 10 M –1 s –1 ). In most instances, triplet excited state extinction coefficients are either reported for the first time or have been revised using ultrafast transient absorption spectroscopy and singlet depletion: ZnTPP (78,000 M –1 cm –1 ) at 470 nm, PdOEP (67,000 M –1 cm –1 ) at 430 nm, PtOEP (51,000 M –1 cm –1 ) at 418 nm, and PtTPBP (100,000 M –1 cm –1 ) at 460 nm. Furthermore, the combined experimental results establish competitive time scales for homo- and heteromolecular TTA rate constants, implying the significance of considering HTTA processes in future research endeavors harnessing TTA photochemistry using common metalloporphyrin photosensitizers.

14 SOLAR ENERGY↗
DOE OSTI2026

Simplifying the Chemical Design of Nonfused-Ring Electron Acceptors─Lessons Learned from Thienothiophene and Benzodithiophene Cores

Nonfused-ring electron acceptors (NFREA)s have been proposed as alternatives to fused-ring acceptors in organic photovoltaics (OPV)s. The simpler molecular design of NFREAs results in a reduced synthetic complexity, potentially lowering manufacturing costs, and easier access to desired optoelectronic properties by structural modifications. However, they have not seen the same rise in popularity as fused nonfullerene acceptors (NFA)s due to their lower performances in devices. In this work, we explore structure–property relationships of three NFREA molecules based on thieno[3,2-b]thiophene (TT) and benzo[1,2-b:4,5-b′]dithiophene (BDT) cores and malononitrile functionalized-isatin end group acceptors. We describe their synthetic routes, computational analysis, and photophysical and electronic properties. Here, we investigated the effect of changing the core from TT to BDT on electronic properties of the molecules─a result of raising/lowering of the frontier molecular orbital (FMO) levels. We also explored the effect of branched vs nonbranched alkyl groups on the morphological and blend-capabilities in bulk heterojunction (BHJ) OPV devices. These effects were then reflected in the overall device performances, primarily due to favorable FMO energy alignment between the NFREA and polymer. To investigate the behavior of the excited states of the NFREAs within the active layer of the devices, we performed time-resolved microwave conductivity and transient absorption experiments, which confirmed that the TT molecules exhibited very low conductance while the BDT molecule showed moderate photoconductance. Our combined theoretical, synthetic, device, and charge carrier dynamics studies of these materials reveal the central role that structure–property relationships play in future molecular designs of NFREAs that can perform as well as their fused counterparts.

14 SOLAR ENERGY↗
DOE OSTI2020

Oligomeric Ruthenium Polypyridyl Dye for Improved Stability of Aqueous Photoelectrochemical Cells

Water-splitting dye-sensitized photoelectrochemical cells rely on molecular sensitizers to harvest light energy and drive the catalytic reactions necessary to generate hydrogen and oxygen from water. The desorption of sensitizer molecules from the semiconductor–aqueous electrolyte interface is a significant barrier to the practical implementation of these cells. To address this problem, we synthesized an oligomeric ruthenium dye ([RuP] n ) that has dramatically improved stability as a photosensitizer for TiO 2 electrodes over the pH range of interest (4–7.8) for DSPECs. Additionally, the efficiency of photoelectrochemical charge separation is known to depend on the rate of cross-surface hole diffusion between dye molecules. The oligomeric dye ([RuP] n ) shows an order of magnitude faster cross-surface hole diffusion than the commonly used monomeric [Ru(bpy) 2 (4,4-PO 3 H 2 ) 2 bpy] 2+ (RuP) sensitizer. Finally, the enhanced stability of the polymeric dye also enables the use of intensity-modulated photovoltage spectroscopy to measure the recombination rate of photogenerated electrons and holes as a function of electrolyte pH.

14 SOLAR ENERGY↗
DOE OSTI2021

Light Induced Processes in CsPbBr 3 –Au Hybrid Nanocrystals: Electron Transfer and Expulsion of Au

Semiconductor–metal heterostructures such as CsPbBr 3 –Au are useful in photocatalysis. When Au nanoparticles are deposited on the CsPbBr 3 nanocrystal surface, they efficiently quench the photoluminescence of the semiconductor. This process has been studied by femtosecond transient absorption spectroscopy measurements, which indicate that electron transfer to the Au nanoparticles occurs from both hot and relaxed electrons in the conduction band of CsPbBr 3 . The electron transfer rate constant is much larger for the hot electrons compared to the relaxed electrons. Under steady state photoirradiation of CsPbBr 3 –Au heterostructure, the photogenerated electrons from the excited CsPbBr 3 nanocrystals continue to charge the Au nanoparticles. After sufficient irradiation, the gold nanoparticles dissociate from the CsPbBr 3 surface and aggregate into larger size gold nanoparticles. The expulsion of gold nanoparticles restores the original luminescence behavior of CsPbBr 3 nanocrystals. The spectroscopic and morphological studies provide insight into the expulsion of gold nanoparticles in photoirradiated CsPbBr 3 –Au heterostructures.

14 SOLAR ENERGY↗
DOE OSTI2023

LaMnO 3 Dopants for Efficient Thermochemical Water Splitting Identified by Density Functional Theory Calculations

While ceria is the standard material for two-step water splitting, perovskites are emerging as viable alternatives. In this work, based on the orthorhombic LaMnO 3 supercell, we substitute Li Na K Rb Mg Ca Sr Ba on the A-sites (La sites) and Al Ga In Mg Zn on the B-sites (Mn sites) at a concentration of 37.5%. The range of temperature and oxygen partial pressure at which each composition is stable is predicted. For compositions that are stable in relevant temperature and pressure ranges, the oxygen vacancy formation energies are determined for all of the oxygen vacancy site positions available in the computational supercell. Mg, Ca, Sr, and Ba A-site-substituted LaMnO 3 and Al and In B-site-substituted LaMnO 3 meet these two criteria for candidates in solar-thermal water splitting applications. Finally, oxygen vacancy formation energy can also be controlled by adjusting the doping strategy.

08 HYDROGEN↗