Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “solar coronal loops”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

3-D Mapping of the Magnetic Field in the Active Region by the CLASP2.1 Rocket Experiment

Comprehensive magnetic field measurements of the solar atmosphere are crucial for understanding energy transport from the photosphere to the corona and its dissipation. However, observations of the magnetic field in the chromosphere and the upper atmospheric layers above the chromosphere, where the gas pressure dominance changes from (β>1) to magnetic pressure dominance (β<1), are overwhelmingly lacking. Therefore, we have focused on the polarization of ultraviolet radiation emitted from the upper chromosphere and transition layer and have conducted the Japan-U.S.-EU observation rocket experiment CLASP in order to demonstrate its usefulness. In CLASP2.1 conducted on October 8, 2021, scan observations were made at 16 locations in the active region, and Stokes (intensity $I$, linearly polarized $Q$, $U$, circularly polarized $V$) spectra in the 280~nm wavelength range were obtained. Looking at the observed region with AIA 171~{¥AA} on board the SDO satellite, we see that it consists of a region where a structure corresponding to the foot of a high-temperature loop called moss (moss) is seen, and a region where a low-temperature loop spreading from a sunspot is seen. We focused on the ionized magnesium $h$ & $k$ lines (emitted from the middle and uppermost of the chromosphere) and the manganese lines (emitted from the low part of the chromosphere), which show particularly prominent circular polarization, and derived the line-of-sight magnetic fields in the low, middle and uppermost parts of the chromosphere by applying weak field approximation to them. Furthermore, by combining the results with observations by the Solar Optical Telescope onboard the solar observing satellite HINODE, we obtained three-dimensional information on the magnetic field in the active region from the photosphere to the uppermost part of the chromosphere. In general, the magnetic field in the active region becomes weaker and smoother as one goes up in the sky, as reported by the CLASP2 observation (Ishikawa et al. 2021). However, in some regions, polarity reversal was observed only in the uppermost part of the chromosphere, and comparison with high spatial resolution transition layer and coronal images recorded by SDO/AIA revealed the connection between the magnetic field structure in the chromosphere and coronal loops.

R. Ishikawa↗

Simultaneous Solar Maximum Mission and Very Large Array (VLA) observations of solar active regions

Simultaneous observations of solar active regions with the Solar Maximum Mission (SMM) Satellite and the Very Large Array (VLA) have been obtained and analyzed. Combined results enhance the scientific return for beyond that expeted from using either SMM or VLA alone. A total of two weeks of simultaneous SMM/VLA data were obtained. The multiple wavelength VLA observations were used to determine the temperature and magnetic structure at different heights within coronal loops. These data are compared with simultaneous SMM observations. Several papers on the subject are in progress. They include VLA observations of compact, transient sources in the transition region; simultaneous SMM/VLA observations of the coronal loops in one active region and the evolution of another one; and sampling of the coronal plasma using thermal cyclotron lines (magnetic field - VLA) and soft X ray spectral lines (electron density and electron temperaure-SMM).

Lang, K. R.↗

Very Large Array (VLA) observations of coronal loops

Advances in ground based Very Large Array (VLA) observations of the Sun, and how they complement and extend EUV and X-ray observations from space are reviewed. The VLA provides high resolution, full disk images that include hot, dense coronal loops within individual active regions (at 20 cm), and cooler, higher, more extended structures (at 90 cm) that can connect widely separated active regions, describe high lying noise storms, or act as a transition sheath between cool dark filaments and the hot enveloping corona. VLA images of both cool and hot corona loops can be compared with data from most of the SOHO (Solar and Heliospheric Observatory) instruments, thereby enhancing the scientific return of the SOHO mission beyond that expected from using its instruments alone.

Lang, Kenneth R.↗

A forward-reverse shock pair in the solar wind driven by over-expanison of a coronal mass ejection: Ulysses observations

A previously unidentified type of solar wind forward-reverse shock pair has been observed by Ulysses at 4.64 AU and S32.5 deg. In contrast to most solar wind forward-reverse shock pairs, which are driven by the speed difference between fast solar wind plasma and slower plasma ahead, this particular shock pair was driven purely by the over-expansion of a coronal mass ejection (CME) in transit from the Sun. A simple numerical simulation indicates that the over-expansion was a result of a high initial internal plasma and magnetic field pressure within the CME. The CME observed at 4.64 AU had the internal field structure of a magnetic flux rope. This event was associated with a solar disturbance in which new magnetic loops formed in the corona almost directly beneath Ulysses approximately 11 days earlier. This association suggests that the flux rope was created as a result of reconnection between the 'legs' of neighboring magnetic loops within the rising CME.

Gosling, J. T.↗

On Heating Large Bright Coronal Loops by Magnetic Microexplosions at their Feet

In previous work, by registering Yohkoh SXT coronal X-ray images with MSFC vector magnetograms, we found that: (1) many of the larger bright coronal loops rooted at one or both ends in an active region are rooted around magnetic islands of included polarity, (2) the core field encasing the neutral line encircling the island is strongly sheared, and (3) this sheared core field is the seat of frequent microflares. This suggests that the coronal heating in these extended bright loops is driven by many small explosive releases of stored magnetic energy from the sheared core field at their feet, some of which magnetic microexplosions also produce the microflare heating in the core fields. In this paper, we show that this scenario is feasible in terms of the energy Abstract: required for the observed coronal heating and the magnetic energy available in the observed sheared core fields. In a representative active region, from the X-ray and vector field data, we estimate the coronal heating consumption by a selected typical large bright loop, the coronal heating consumption by a typical microflare at the foot of this loop, the frequency of microflares at the foot, and the available magnetic energy in the microflaring core field. We find that: (1) the rate of magnetic energy release to power the microflares at the foot (approx. 6 x 10(ext 25)erg/s) is enough to also power the coronal heating in the body of the extended loop (approx. 2 x l0(exp 25 erg/s), and (2) there is enough stored magnetic energy in the sheared core field to sustain the microflaring and extended loop heating for about a day, which is a typical time for buildup of neutral-line magnetic shear in an active region. This work was funded by the Solar Physics Branch of NASA's Office of Space Science through the SR&T Program and the SEC Guest Investigator Program.

Moore, Ronald L↗

Multi-wavelength Observations and Modelling of a Solar Flare

Aims: The aim of this work is to investigate the dynamic behavior of a C-class solar flare through the evolution of temperature, emission measure, energy loss and velocity. In particular, the variation of these properties with time are studied using multi-wavelength observations in combination with a recently developed 0-D hydrodynamic model. Methods: The temperature and emission measure evolution were studied using several instruments covering a wide range of temperatures - the Reuven Ramaty High Energy Solar Spectroscopic Imager (RHESSI, >5 MK), GOES-12 (5- 30 MK), the Transition Region and Coronal Explorer (TRACE 171 A, 1 MK) and the Coronal Diagnostic Spectrometer (CDS, 0.03-8 MK). The temperature and emission measure were analysed through the systematic cooling of flare plasma through the response functions of these instruments. These parameters were then investigated using the Enthalpy Based Thermal Evolution of Loops model (EBTEL). The Doppler shifts at both flare footpoints were analysed using five emission lines seen by CDS. Results: The flare began with clear evidence for pre-flare heating. Upflows of approx.90 km/s and low level emission, both observed in Fe XIX before the main impulsive phase were explained by pre-flare gentle chromospheric evaporation. During the main impulsive phase, the flare plasma was heated to a temperature of >13 MK in approximately 10 minutes. Explosive chromospheric evaporation was observed, driving upflows of approx.80 km/s in Fe XIX and simultaneous downflows of approx.20 km/s in He I and O v. At the peak of the Rare, conduction modelled by EBTEL was found to be the dominant loss mechanism, working efficiently to both lower the temperatures and drive gentle chromospheric evaporation. As the temperature fell below approx.8 MK, radiation became the dominant loss mechanism. During the final stages of the decay phase, downflowing plasma was observed at the footpoints in He I, O v and Mg x at velocities of up to approx.40 km/s, suggesting loop draining occurred. Conclusions. This is the first extensive study of the evolution of flare plasma using both spectroscopic and broad-band instruments in conjunction with a comprehensive hydrodynamic model. The flare began with pre-flare heating and then evolved following the predictions of the standard flare model. Detailed analysis of the plasma heating mechanisms was carried out and the heating function most consistent with observations was found to be Gaussian in shape. The simulations suggested that both direct heating and heating by a non-thermal beam played significant roles in this event.

Raftery, Claire L.↗

Type II bursts, shock waves, and coronal transients - The event of 1980 June 29, 0233 UT

The metric Type-II solar burst event of June 29, 1980, is characterized on the basis of spatially resolved radioheliograph observations obtained at Culgoora, Australia, and visible-light observations obtained with the coronograph/polarimeter of the SMM satellite. The data are presented in images, diagrams, and graphs and discussed in detail. The Type-II emission is found to arise in the dense moving material behind the transient loops, which have sky-plane width 0.5 solar radius and line-of-sight depth 0.1-0.4 solar radius. A faint arc observed moving ahead of the transient loops at about 900 km/sec and not associated with the Type-II burst is attributed to a shock front, and the compression ratio and Alfven Mach number of the enhanced-density region are estimated as n2/n1 = 1.3-3 and M(A) = 1.2-3. The ambient material at 3 solar radii is determined to have Alfven speed 250-625 km/sec and magnetic-field strength 50-120 mG. The total mass of the event is calculated as 700 Tg; the total magnetic energy of the loops is (1.5-15) x 10 to the 29th ergs.

Gary, D. E.↗

Quantitative Examination of a Large Sample of Supra-Arcade Downflows in Eruptive Solar Flares

Sunward-flowing voids above post-coronal mass ejection flare arcades were first discovered using the soft X-ray telescope aboard Yohkoh and have since been observed with TRACE (extreme ultraviolet (EUV)), SOHO/LASCO (white light), SOHO/SUMER (EUV spectra), and Hinode/XRT (soft X-rays). Supra-arcade downflow (SAD) observations suggest that they are the cross-sections of thin flux tubes retracting from a reconnection site high in the corona. Supra-arcade downflowing loops (SADLs) have also been observed under similar circumstances and are theorized to be SADs viewed from a perpendicular angle. Although previous studies have focused on dark flows because they are easier to detect and complementary spectral data analysis reveals their magnetic nature, the signal intensity of the flows actually ranges from dark to bright. This implies that newly reconnected coronal loops can contain a range of hot plasma density. Previous studies have presented detailed SAD observations for a small number of flares. In this paper, we present a substantial SADs and SADLs flare catalog. We have applied semiautomatic detection software to several of these events to detect and track individual downflows thereby providing statistically significant samples of parameters such as velocity, acceleration, area, magnetic flux, shrinkage energy, and reconnection rate. We discuss these measurements (particularly the unexpected result of the speeds being an order of magnitude slower than the assumed Alfven speed), how they were obtained, and potential impact on reconnection models.

Savage, Sabrina L.↗

Contribution of Spicules to Solar Coronal Emission

Recent high-resolution imaging and spectroscopic observations have generated renewed interest in spicules' role in explaining the hot corona. Some studies suggest that some spicules, often classified as type II, may provide significant mass and energy to the corona. Here we use numerical simulations to investigate whether such spicules can produce the observed coronal emission without any additional coronal heating agent. Model spicules consisting of a cold body and hot tip are injected into the base of a warm (0.5 MK) equilibrium loop with different tip temperatures and injection velocities. Both piston- and pressure-driven shocks are produced. We find that the hot tip cools rapidly and disappears from coronal emission lines such as Fe xii 195 and Fe xiv 274. Prolonged hot emission is produced by preexisting loop material heated by the shock and by thermal conduction from the shock. However, the shapes and Doppler shifts of synthetic line profiles show significant discrepancies with observations. Furthermore, spatially and temporally averaged intensities are extremely low, suggesting that if the observed intensities from the quiet Sun and active regions were solely due to type II spicules, one to several orders of magnitude more spicules would be required than have been reported in the literature. This conclusion applies strictly to the ejected spicular material. We make no claims about emissions connected with waves or coronal currents that may be generated during the ejection process and heat the surrounding area.

Shanwlee Sow Mondal↗

Dressing the Coronal Magnetic Extrapolations of Active Regions with a Parameterized Thermal Structure

The study of time-dependent solar active region (AR) morphology and its relation to eruptive events requires analysis of imaging data obtained in multiple wavelength domains with differing spatial and time resolution, ideally in combination with 3D physical models. To facilitate this goal, we have undertaken a major enhancement of our IDL-based simulation tool, GX_Simulator, previously developed for modeling microwave and X-ray emission from flaring loops, to allow it to simulate quiescent emission from solar ARs. The framework includes new tools for building the atmospheric model and enhanced routines for calculating emission that include new wavelengths. In this paper, we use our upgraded tool to model and analyze an AR and compare the synthetic emission maps with observations. We conclude that the modeled magneto-thermal structure is a reasonably good approximation of the real one.

Nita, Gelu M.↗

Parametric Transformation Analysis

Because twisted coronal features are important proxies for predicting solar eruptive events, and, yet not clearly understood, we present new results to resolve the complex, non-potential magnetic field configurations of active regions. This research uses free-form deformation mathematics to generate the associated coronal magnetic field. We use a parametric representation of the magnetic field lines such that the field lines can be manipulated to match the structure of EUV and SXR coronal loops. The objective is to derive sigmoidal magnetic field solutions which allows the beta greater than 1 regions to be included, aligned and non-aligned electric currents to be calculated, and the Lorentz force to be determined. The advantage of our technique is that the solution is independent of the unknown upper and side boundary conditions, allows non-vanishing magnetic forces, and provides a global magnetic field solution, which contains high- and low-beta regimes and is consistent with all the coronal images of the region. We show that the mathematical description is unique and physical.

Gary, G. Allan↗

Energy balance in coronal funnels

The energy balance in magnetic flux tubes is examined semianalytically for the case in which thermal conduction balances radiation or in which enthalpy transport occurs. Different values are considered for areal constriction, shape, length, and maximum temperature. The overall energy budget of the solar corona is not significantly affected by magnetic constriction. A bowl-shaped funnel with a constriction factor of 4 describes the empirical differential-emission measure for log-T values between approximately 5.3 and 6.0. Loop-scaling relationships are derived for the full range of models to illustrate the dependence of the constant of proportionality on the properties of the magnetic constriction. Constriction can reduce the total energy requirement of the funnel by a factor of 5 and not affect the differential emission in flow-dominated models.

Rabin, Douglas↗

A Survey of Nanoflare Properties in Active Regions Observed with the Solar Dynamics Observatory

In this paper, we examine 15 different active regions (ARs) observed with the Solar Dynamics Observatory and analyze their nanoflare properties. We have recently developed a technique that systematically identifies and measures plasma temperature dynamics by computing time lags between light curves. The time lag method tests whether the plasma is maintained at a steady temperature, or if it is dynamic, undergoing heating and cooling cycles. An important aspect of our technique is that it analyzes both observationally distinct coronal loops as well as the much more prevalent diffuse emission between them. We find that the widespread cooling reported previously for NOAA AR 11082 is a generic property of all ARs. The results are consistent with impulsive nanoflare heating followed by slower cooling. Only occasionally, however, is there full cooling from above 7 megakelvins to well below 1 megakelvin. More often, the plasma cools to approximately 1-2 megakelvins before being reheated by another nanoflare. These same 15 ARs were first studied by Warren et al. We find that the degree of cooling is not well correlated with the reported slopes of the mission measure distribution. We also conclude that the Fe (sup XVIII)-emitting plasma that they measured is mostly in a state of cooling. These results support the idea that nanoflares have a distribution of energies and frequencies, with the average delay between successive events on an individual flux tube being comparable to the plasma cooling timescale.

Viall, Nicholeen M.↗

Possible observation of a disconnected magnetic structure in a coronal transient

Solar Maximum Mission coronagraph/polarimeter observations of the coronal transient of March 15-16, 1980, which show a bright front convex toward the sun propagating out through the corona at 175 km/sec, are reported. A fan-shaped bright region connecting this front to the inner corona collapses into a narrow, bright ray over the next few hours. These observations are interpreted as resulting from the disconnection of magnetic loops from the underlying prominencelike loop structures seen rising earlier in the event. Other similar inverted arches exist in the C/P data, but are usually seen with poorer temporal resolution.

Illing, R. M. E.↗

On the inability of magnetically constricted transition regions to account for the 10 to the 5th to 10 to the 6th K plasma in the quiet solar atmosphere

Static models of the plasma in the quiet solar atmosphere incorporating not only conduction and radiation but also the effects of large magnetic constrictions are examined. It is found that the bulk of the solar plasma at temperatures below 7 x 10 to the 5th K cannot be produced by a conductive transition region when it is modeled by flux tubes with constriction compatible with observations. The present findings suggest that the major portion of the UEV plasma may be maintained in an ensemble of small, individual magnetic loops located within the supergranular network and having peak temperatures ranging from chromospheric to coronal values.

Dowdy, James F., Jr.↗

A multiwavelength study of a double impulsive flare

Solar Maximum Mission (SMM) and ground-based observations are given for two flares which occurred 3 min apart in the same section of the active region. The physical characteristics of the two flares are derived and compared, and the main difference between them is noted to be in the preflare state of the coronal plasma at the flare site. These data suggest that the plasma filling the flaring loops absorbed most of the energy released during the impulsive phase of the second flare, so that only a fraction of the energy could reach the chromosphere to produce mass motions and turbulence. Since a study of the brightest flares observed by SMM shows that at least 43 percent of them are multiple, the situation presently studied may be quite common, and the difference in initial plasma conditions could explain at least some of the large variations in observed flare parameters.

Strong, K. T.↗

VLA observations of solar active regions at 6 and 20 cm

High-resolution observations are presented of two active regions at 6 and 20 cm over a period of 5 days, together with H-alpha and photospheric magnetic fields. The large-scale emission at 20 cm is associated with the H-alpha plage. In one region the strongest source was over the neutral line, near the tip of an active-region filament, which indicates that the emission probably originated in small-scale coronal loops. In the second region the peak of the emission was near a well-developed sunspot. Neither region showed evidence of large-scale loops joining their preceding and following parts. Several other sources were observed at 20 cm; a source associated with an H-alpha plage region crossed by a filament and one associated with a small bipolar region are briefly discussed. The 6-cm emission from a well-developed spot showed clearly the characteristics expected from gyroresonance model computations.

Alissandrakis, C. E.↗

Flares on the sun and other stars

Research on solar and stellar flares is reviewed. The characteristics of flares in various spectral regions are described, and the physics of flares is discussed, including the two-ribbon flare model, coronal mass ejections, flare dynamics, white light flare production, and electron beams and proton beams in hard X-ray flares. The analysis of the flare energy budget, magnetic field measurements, multispectral stellar observations, plasma emissivity, conditions in flare loops, cooling curves, and proton beam signatures is addressed. Microflaring and coronal heating are examined.

Haisch, Bernhard↗