Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “sigma model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Effects of Vegetation Canopy Structure on Microwave Scattering

The role of canopy structure on microwave backscattering is studied. Structure refers to the size, orientation, and vertical placement of scatterers in the canopy. Models to predict the backscattering coefficient, SIGMAO, of vegetation with explicit biophysical and explicit polarization-dependent parameters were developed. Preparation for field measurements with radar scatterometers was completed. Technical progress included: (1) the modification of the Attema and Ulaby (1977) model and its multilayer variation by Hoekman et al. (1983) to include polarization explicitly (i.e., to allow for separate backscattering cross sections, SIGMA, and extinction cross sections, Q, for each polarization), (2) the investigation of the modified model to isolate canopy element orientation parameters by the rationing of SIGMAO measurements for different polarization combinations, (3) the development of expressions for bistatic scattering and canopy-substrate scattering to supplement the models, (4) the performance of sensitivity analyses on these models, (5) the modification of the Attema and Ulaby model to alloy for changes, (6) the use of the modified model with a seasonal corn data set from Kansas (Eger et al., 1983), and (7) the initiation of preparations for empirical measurements with radar spectrometer and the Mobile Radar Scatterometer in irrigated cropland to test the models.

Paris, J. F.↗
NASA NTRS2011

Towards an Optimal Noise Versus Resolution Trade-Off in Wind Scatterometry

A scatterometer is a radar that measures the normalized radar cross section sigma(sup 0) of the Earth's surface. Over the ocean this signal is related to the wind via the geophysical model function (GMF). The objective of wind scatterometry is to estimate the wind vector field from sigma(sup 0) measurements; however, there are many subtleties that complicate this problem-making it difficult to obtain a unique wind field estimate. Conventionally, wind estimation is split into two stages: a wind retrieval stage in which several ambiguous solutions are obtained, and an ambiguity removal stage in which ambiguities are chosen to produce an appropriate wind vector field estimate. The most common approach to wind field estimation is to grid the scatterometer swath into wind vector cells and estimate wind vector ambiguities independently for each cell. Then, field wise structure is imposed on the solution by an ambiguity selection routine. Although this approach is simple and practical, it neglects field wise structure in the retrieval step and does not account for the spatial correlation imposed by the sampling. This makes it difficult to develop a theoretically appropriate noise versus resolution trade-off using pointwise retrieval. Fieldwise structure may be imposed in the retrieval step using a model-based approach. However, this approach is generally only practical if a low order wind field model is applied, which may discard more information than is desired. Furthermore, model-based approaches do not account for the structure imposed by the sampling. A more general fieldwise approach is to estimate all the wind vectors for all the WVCs simultaneously from all the measurements. This approach can account for structure of the wind field as well as structure imposed by the sampling in the wind retrieval step. Williams and Long in 2010 developed a fieldwise retrieval method based on maximum a posteriori estimation (MAP). This MAP approach can be extended to perform a noise versus resolution trade-off, and deal with ambiguity selection. This paper extends the fieldwise MAP estimation approach and investigates both the noise versus resolution trade-off as well as ambiguity removal in the fieldwise wind retrieval step. The method is then applied to the Sea Winds scatterometer and the results are analyzed. This paper extends the fieldwise MAP estimation approach and investigates both the noise versus resolution trade-off as well as ambiguity removal in the fieldwise wind retrieval step. The method is then applied to the Sea Winds scatterometer and the results are analyzed.

soil moisture↗
NASA NTRS1991

A direct algorithm for convective adjustment of the vertical temperature profile for an arbitrary critical lapse rate

An efficient direct algorithm of convective adjustment for an arbitrary critical value of the vertical temperature lapse rate gamma is proposed. The algorithm provides an exact and unique solution of a standard convective adjustment problem for models with temperature specified either on nonuniformly spaced levels or for layers of different thicknesses in pressure, sigma, or other vertical coordinate related to pressure. The algorithm may be recommended for use either directly in atmospheric models not explicitly including a hydrologic cycle with prescribed gamma, or as a part of more complicated parameterizations of moist convection, where gamma may be calculated depending on relative humidity.

Akmaev, Rashid A.↗
DOE OSTI2025

Safe Reinforcement Learning-Based Transient Stability Control for Islanded Microgrids With Topology Reconfiguration

This paper proposes a safe reinforcement learning (RL)-based transient stability emergency control (TSEC) method for islanded microgrids. RL requires extensive interaction with the environment to learn control strategies, hence, a data-driven approach is used as a substitute for time-consuming time-domain simulation calculations. Deep sigma point processes (DSPP), which is a Gaussian process model, is utilized to predict the normal distribution of transient stability of microgrids and to construct a transient stability chance constraint. Reward-constrained policy optimization (RCPO) can simultaneously achieve objective prediction, policy learning, and constraint cost coefficient update across multiple timescales. RCPO interacts with the DSPP-based microgrid environment through a multi-process parallel manner, greatly increasing the training speed. Case studies on a real islanded microgrid demonstrate that the proposed method can efficiently and quickly obtain the optimal emergency control strategy while adhering to all hard constraints.

14 SOLAR ENERGY↗
NASA NTRS1987

The magnetosphere of Saturn

Pioneer 11 and Voyager 1 and 2 magnetic field measurements over the entire flyby of Saturn's magnetic field have been analyzed by fitting a magnetospheric dipole field (i.e., a dipole field plus the field due to currents in the magnetopause), higher moments of the internal field aligned with the dipole along the rotation axis, and the field due to an equatorial sheet current to the magnetic measurements. A dipole moment of 21,431 nT R(s) exp 3, a quadrupole moment of 2403 nT R(s) exp 4, an octopole moment of 2173 nT R(s) exp 5, and an equatorial sheet current of half thickness 2.0 R(s) from about 5 R(s) to the solar edge of the magnetopause, fit the measurements over the entire magnetosphere with an rms deviation of 3.2 nT where R(s) is the planet radius, 66,330 km. The primary feature of the present analysis is the explicit inclusion of the calculated magnetopause current field, which reduces the overall rms deviation over the entire flyby from sigma values of 4.7 and 5.9 nT, using previous models, to 3.2 nT using the present.

Beard, David B.↗
DOE OSTI2025

Forecasting constraints on the high-z IGM thermal state from the Lyman-α forest flux autocorrelation function

ABSTRACT The autocorrelation function of the Lyman-$\alpha$ (Ly $\alpha$) forest flux from high-z quasars probes the small-scale structure of the intergalactic medium (IGM). The thermal state of the IGM, determined by the physics of reionization, sets the small-scale power observed in the Ly $\alpha$ forest. To explore the sensitivity of the autocorrelation function to the IGM’s thermal state, we compute the autocorrelation function from a cosmological hydrodynamical simulation with an instantaneous reionization model and 135 post-processed thermal states. Using mock data sets of 20 quasars, we forecast constraints on $T_0$ and $\gamma$, which characterize the post-processed IGM thermal state, at $5.4 \le z \le 6$. While this model simplifies the IGM’s thermal state, it serves as a key first step in assessing future observational prospects. We also perform an inference test on mocks and re-weight out posterior distributions to guarantee that they exhibit statistically correct behaviour. At $z = 5.4$, we find that an idealized data set constrains $T_0$ to 59 per cent and $\gamma$ to 16 per cent at the 1$\sigma$ equivalent confidence level. To explore more realistic, non-instantaneous reionization scenarios, we analyse four models combining temperature and ultraviolet background (UVB) fluctuations at $z = 5.8$. We find that mock data generated from a model with both temperature and UVB fluctuations can rule out a model with only temperature fluctuations at the $> 1\sigma$ level 73.9 per cent of the time.

Wolfson, Molly↗
NASA NTRS1999

Turbulent Diffusivities for Momentum, Heat, Salt and Passive Scalars

A program began ten years ago to build a turbulence model to describe high Reynolds numbers flows. Specifically, the aim was to devise a model that would satisfy two basic conditions: reproduce available turbulence data (laboratory, numerical simulations, etc.) concerning shear driven flows, buoyancy driven flows, 2D turbulence, freely decaying turbulence etc., and yet be manageable so as to be used, for example, in GCM'S. The model was presented in a series of papers that have appeared in Physics of FLuids since 1996. A total of about 80 turbulence statistics were reproduced. The model has no adjustable parameters. The next step was to apply the model to construct the vertical diffusivities K for moment K(sub m), temperature K(sub h), salt K(sub g) and passive scalars K(sub c). First, we took K(sub g) = K(sub h) and tested the model using the Geophysical Fluid Dynamics Laboratory (GFDL) ocean model. The results for the profiles of T and S vs. depth are indistinguishable from those derided using the latest model, the KPP model by the NCAR group. Presently, we are running the same GFDL code relaxing the assumptive K(sub g) = K(sub h). Indeed, the turbulence model yields a salt diffusivity that depends on Ri and R Rho (= Beta Sigma S/Sigma z/Alpha Sigma T/Sigma z) in such a way that K(sub g) may be quite different from K(sub h). Salt fingers and double diffusivity laboratory data are reproduced. Results from the ocean model will be available shortly. Finally, we are trying to derive the horizontal diffusivities with the goal of providing a physically acceptable representation of mesoscale eddies. The recently suggested GMW parameterization has improved several O-GCM results and the goal here is to try to derive/justify it from a turbulence model and/or propose improvements/modifications. Theoretical work is in progress.

Canuto, Vittorio↗
NASA NTRS1980

Theoretical models for microwave snow response and applications to remote sensing

Two theoretical models were developed to characterize snowpacks: (1) a random medium with a variance, a horizontal correlation length, and a vertical correlation length; and (2) a homogeneous dielectric containing discrete scatters. Theoretical results were matched with experimental data collected from snow ice fields. For snow ice fields the horizontal correlation length is no less than the vertical correlation length signifying a more laminar structure. The correspondence between the continuum random medium and the discrete spherical scatter model can be verified when the vertical correlation length is equal to the horizontal correlation length. The vertically polarized backscattering cross section sigma (sub vv) is always greater than the horizontally polarized backscattering cross section sigma (sub hh) for half space scattering media and may become smaller for a two layer model. In order to account for diurnal change exhibited by snow fields in both the active and passive remote sensing cases, a three layer model with a thin top layer caused by solar illumination must be used.

Kong, J. A.↗
NASA NTRS1985

Low-angle normal faults-low differential stress at mid crustal levels

A simple model for frictional slip on pre-existing faults that considers the local stress state near the fault and the effect of non-hydrostatic fluid pressures predicts that low-angle normal faulting is restricted to areas of the crust characterized by low differential stress and nearly lithostatic fluid pressures. The model considers frictional slip on a cohesionless low-angle normal fault governed by the failure criterion tau = mu sub f (sigma (*) sub n) =mu sub f (sigma sub n - P sub f) where tau and sigma sub n are the shear and normal stresses across the fault plane, mu sub f is the static coefficient of friction, and P sub f is the pore fluid pressure. As a first approximation, the model considers a vertical greatest principal compressive stress, sigma sub 1. It is apparent that if slip on low-angle normal faults is governed by the avove frictional failure criterion, slip on the low-angle normal fault occurs only if the least effective principal stress, sigma (*) sub 3 = sigma sub 3 - P sub f, is tensile, whenever tan superscrip -1(mu sub f d, where d is the dip of the fault. If detachment faulting occurs at any significant depth in the crust, P sub f sigma sub 3 is required. In light of this conclusion I allow P sub f to vary as necessary to allow slip on the low-angle normal fault.

Power, W. L.↗
NASA NTRS2010

Estimation and Modeling of Enceladus Plume Jet Density Using Reaction Wheel Control Data

The Cassini spacecraft was launched on October 15, 1997 by a Titan 4B launch vehicle. After an interplanetary cruise of almost seven years, it arrived at Saturn on June 30, 2004. In 2005, Cassini completed three flybys of Enceladus, a small, icy satellite of Saturn. Observations made during these flybys confirmed the existence of a water vapor plume in the south polar region of Enceladus. Five additional low-altitude flybys of Enceladus were successfully executed in 2008-9 to better characterize these watery plumes. The first of these flybys was the 50-km Enceladus-3 (E3) flyby executed on March 12, 2008. During the E3 flyby, the spacecraft attitude was controlled by a set of three reaction wheels. During the flyby, multiple plume jets imparted disturbance torque on the spacecraft resulting in small but visible attitude control errors. Using the known and unique transfer function between the disturbance torque and the attitude control error, the collected attitude control error telemetry could be used to estimate the disturbance torque. The effectiveness of this methodology is confirmed using the E3 telemetry data. Given good estimates of spacecraft's projected area, center of pressure location, and spacecraft velocity, the time history of the Enceladus plume density is reconstructed accordingly. The 1 sigma uncertainty of the estimated density is 7.7%. Next, we modeled the density due to each plume jet as a function of both the radial and angular distances of the spacecraft from the plume source. We also conjecture that the total plume density experienced by the spacecraft is the sum of the component plume densities. By comparing the time history of the reconstructed E3 plume density with that predicted by the plume model, values of the plume model parameters are determined. Results obtained are compared with those determined by other Cassini science instruments.

Lee, Allan Y.↗
NASA NTRS2010

Estimation and Modeling of Enceladus Plume Jet Density Using Reaction Wheel Control Data

The Cassini spacecraft was launched on October 15, 1997 by a Titan 4B launch vehicle. After an interplanetary cruise of almost seven years, it arrived at Saturn on June 30, 2004. In 2005, Cassini completed three flybys of Enceladus, a small, icy satellite of Saturn. Observations made during these flybys confirmed the existence of a water vapor plume in the south polar region of Enceladus. Five additional low-altitude flybys of Enceladus were successfully executed in 2008-9 to better characterize these watery plumes. The first of these flybys was the 50-km Enceladus-3 (E3) flyby executed on March 12, 2008. During the E3 flyby, the spacecraft attitude was controlled by a set of three reaction wheels. During the flyby, multiple plume jets imparted disturbance torque on the spacecraft resulting in small but visible attitude control errors. Using the known and unique transfer function between the disturbance torque and the attitude control error, the collected attitude control error telemetry could be used to estimate the disturbance torque. The effectiveness of this methodology is confirmed using the E3 telemetry data. Given good estimates of spacecraft's projected area, center of pressure location, and spacecraft velocity, the time history of the Enceladus plume density is reconstructed accordingly. The 1-sigma uncertainty of the estimated density is 7.7%. Next, we modeled the density due to each plume jet as a function of both the radial and angular distances of the spacecraft from the plume source. We also conjecture that the total plume density experienced by the spacecraft is the sum of the component plume densities. By comparing the time history of the reconstructed E3 plume density with that predicted by the plume model, values of the plume model parameters are determined. Results obtained are compared with those determined by other Cassini science instruments.

Lee, Allan Y.↗
NASA NTRS1992

Preliminary analysis of ERS-1 SAR for forest ecosystem studies

An image obtained by the C-band VV-polarized ERS-1 SAR is examined with respect to potential land applications. A scene obtained near noon on August 15, 1991, along the U.S.-Canadian border near Sault Ste. Marie is calibrated relative to an array of trihedral corner reflectors and active radar calibrators distributed across the swath. Extensive contemporaneous ground observations of forest stands are used to predict the radar backscattering coefficient sigma at the time of the SAR overpass using a first-order vector radiative transfer model. These predictions generally agree with the calibrated ERS-1 data to within 1 dB. It is demonstrated that the dynamic range of sigma is sufficient to perform limited discrimination of various forest and grassland communities even for a single-date observation. Furthermore, retrieval of near-surface soil moisture is feasible for grass-covered soils when plant biomass is less than 1 tonne/ha.

Dobson, M. G.↗
NASA NTRS1993

GTARG - The TOPEX/Poseidon ground track maintenance maneuver targeting program

GTARG is a computer program used to design orbit maintenance maneuvers for the TOPEX/Poseidon satellite. These maneuvers ensure that the ground track is kept within +/-1 km with of an = 9.9 day exact repeat pattern. Maneuver parameters are determined using either of two targeting strategies: longitude targeting, which maximizes the time between maneuvers, and time targeting, in which maneuvers are targeted to occur at specific intervals. The GTARG algorithm propagates nonsingular mean elements, taking into account anticipated error sigma's in orbit determination, Delta v execution, drag prediction and Delta v quantization. A satellite unique drag model is used which incorporates an approximate mean orbital Jacchia-Roberts atmosphere and a variable mean area model. Maneuver Delta v magnitudes are targeted to precisely maintain either the unbiased ground track itself, or a comfortable (3 sigma) error envelope about the unbiased ground track.

Shapiro, Bruce E.↗
DOE OSTI2023

DES-Y3 galaxies & ACT DR4 CMB lensing tomography

We present a measurement of the cross-correlation between the \maglim galaxies selected from the Dark Energy Survey (DES) first three years of observations (Y3) and cosmic microwave background (CMB) lensing from the Atacama Cosmology Telescope (ACT) Data Release 4 (DR4), reconstructed over $\sim 436$ $\sqdeg$ of the sky. Our galaxy sample, which covers $\sim 4143$ $\sqdeg$, is divided into six redshift bins spanning the redshift range of $0.20<z<1.05$. We adopt a blinding procedure until passing all consistency and systematics tests. After imposing scale cuts for the cross-power spectrum measurement, we reject the null hypothesis of no correlation at 9.1$\sigma$. We constrain cosmological parameters from a joint analysis of galaxy and CMB lensing-galaxy power spectra considering a flat \LCDM model, marginalized over 23 astrophysical and systematic nuisance parameters. We find the clustering amplitude $S_8\equiv \sigma_8 (\Omega_m/0.3)^{0.5} = 0.75^{+0.04}_{-0.05}$. In addition, we co nstrain the linear growth of cosmic structure as a function of redshift. Our results are consistent with recent DES Y3 analyses and suggest a preference for a lower $S_8$ compared to results from measurements of CMB anisotropies by the \textit{Planck} satellite, although at a mild level ($< 2 \sigma$) of statistical significance.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Muon g-2 Experiment and SM

The anomalous magnetic moment of muon has been used as an indication of physics beyond the Standard Model. Fermilab Muon g-2 experiment has published the most precise measurement of the anomalous magnetic moment of muon with an uncertainty of 460 part-per-billion which showed 4.2 sigma discrepancy between the experiment average and the 2020 g-2 Theory Initiative Standard Model prediction. This talk will show the recent results from the Fermilab Muon g-2 experiment while also briefly cover the status of the Standard Model prediction on calculating the anomalous magnetic moment of muon.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Nucleon off-shell structure and the free neutron valence structure from A=3 inclusive electron scattering measurements

Understanding the differences between the distribution of quarks bound in protons and neutrons is key for constraining the mechanisms of SU(6) spin-flavor symmetry breaking in Quantum Chromodynamics (QCD). While vast amounts of proton structure measurements were done, data on the structure of the neutron is much more spars as experiments typically extract the structure of neutrons from measurements of light atomic nuclei using model-dependent corrections for nuclear effects. Recently the MARATHON collaboration performed such an extraction by measuring inclusive deep-inelastic electron-scattering on helium-3 and tritium mirror nuclei where nuclear effects are expected to be similar and thus be suppressed in the helium-3 to tritium ratio. Here we evaluate the model dependence of this extraction by examining a wide range of models including the effect of using instant-form and light-cone nuclear wave functions and several different parameterizations of nucleon modification effects, including those with and without isospin dependence. We find that, while the data cannot differentiate among the different models of nuclear structure and nucleon modification, they consistently prefer a neutron-to-proton structure function ratio of at $x_B \rightarrow 1$ of $\sim 0.4$ with a typical uncertainty ($1\sigma$) of $\sim0.05$ and $\sim0.10$ for isospin-independent and isospin-dependent modification models, respectively. While strongly favoring SU(6) symmetry breaking models based on perturbative QCD and the Schwinger-Dyson equation calculation, the MARATHON data do not completely rule out the scalar di-quark models if an isospin-dependent modification exist.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2025

Detection of supernova magnitude fluctuations induced by large-scale structure

The peculiar velocities of supernovae and their host galaxies are correlated with the large-scale structure of the Universe, and can be used to constrain the growth rate of structure and test the cosmological model. In this work, we measure the correlation statistics of the large-scale structure traced by the Dark Energy Spectroscopic Instrument Bright Galaxy Survey Data Release 1 sample, and magnitude fluctuations of type Ia supernova from the Pantheon+ compilation across redshifts z < 0.1. We find a detection of the cross-correlation signal between galaxies and type Ia supernova magnitudes. Fitting the normalised growth rate of structure f sigma_8 to the auto- and cross-correlation function measurements we find f sigma_8 = 0.384 +0.094 -0.157, which is consistent with the Planck LambdaCDM model prediction, and indicates that the supernova magnitude fluctuations are induced by peculiar velocities. Using a large ensemble of N-body simulations, we validate our methodology, calibrate the covariance of the measurements, and demonstrate that our results are insensitive to supernova selection effects. We highlight the potential of this methodology for measuring the growth rate of structure, and forecast that the next generation of type Ia supernova surveys will improve f sigma_8 constraints by a further order of magnitude.

Nguyen, A. [Swinburne U., Ctr. Astrophys. Supercom↗