Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “separability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Unconventional desalination: The use of cyclone separators in HDH desalination to achieve zero liquid discharge

Research in water desalination technologies is constantly growing to meet global demands for freshwater. Though acting to meet these demands, the rapid growth and spread of desalination technologies poses environmental issues due to the increasing brine concentrates that are ultimately discharged back to nature. This article presents a cyclone separator to transform a humidification-dehumidification (HDH) cycle to a dual-product cycle to produce freshwater and solid salt crystals for highly saline streams. A desalination cycle equipped with a cyclone separator is used to treat water with 3.5%–81% salinity. The separation efficiency is well above 99% and can produce potable water from hyper saline feed in a once-through process. Further, the cyclone separator performance was tested under different conditions including humidity ratios, relative humidities, and feed stream's salinities. The cyclone separator is self-cleaning and overcomes salt scaling. This behavior is a direct function of the walls' temperature and the carrier air dew point. Self-cleaning capability allows the cyclone separator to treat feed water of extreme salinities (up to 810,000ppm) down to freshwater salinity with zero liquid discharge. The cyclone separator was utilized in a novel HDH desalination technology to treat different salinities. The product was freshwater of salinity <500ppm.

42 ENGINEERING↗
DOE OSTI2020

On electrolyte wetting through lithium-ion battery separators

The wettability by electrolyte is a critical characteristic of lithium-ion battery separators since electrolyte absorption is essential for ionic transport. Most importantly, fast absorption of electrolyte facilitates the electrolyte filling and wetting processes during the battery assembly. However, theoretical or experimental investigation of separator wettability has rarely been reported, and thus very little quantitative data can be found in the existing literature. Here, innovative experimental techniques and associated analytical models have been developed to fully characterize the electrolyte wetting behavior through battery separators. Both in-plane and through-plane imbibition processes are investigated. The results show that, electrolyte needs significantly longer time to wet separators than it does for commercial electrodes. The wetting rate depends significantly on the pore size, porosity, and micro-structure of the separators. Electrolyte in-plane wetting is only observed in the separators manufactured by the wet process. Increasing separator porosity and pore size is shown to be substantially increasing through-plane wetting rate. In addition, ceramic coating is shown to increase in-plane wetting but retard through-plane wetting.

25 ENERGY STORAGE↗
DOE OSTI2024

Toward sustainable electrochemically mediated separations driven by renewable energy

Environmental pollution, water scarcity, resource shortage, and fossil fuel reliance have all represented threats to a sustainable future. Separation processes play a pivotal role in improving sustainability in fields such as industrial processes, resource recycling, wastewater treatment, and water desalination, among others. Electrochemical systems have gained increased attention as effective separation platforms, not only in performance but also as a potentially energy-efficient approach. However, the reliance on non-renewable energy sources, such as fossil fuels, for electricity generation limits the advancement toward a fully sustainable separation process. Integration of separation processes with eco-friendly renewable energy sources can increase overall sustainability and decrease carbon footprint. Here, in this review, we provide an overview of electrochemical separations and recent efforts to integrate them with renewable energy sources such as heat and solar energy. We discuss electrochemical separations, including electrosorption and electrodialysis, and research to transition these processes to thermoelectrochemical (TEC) and photoelectrochemical (PEC) platforms. Finally, we discuss current challenges and future prospects in direct integration of renewable energy sources with separation processes.

electrochemistry↗
DOE OSTI2017

Mechanical behavior and failure mechanisms of Li-ion battery separators

We determine and compare anisotropic mechanical properties for three types of commercially available Li-ion battery separators: Celgard 2325, Celgard PP2075 dry-processed polymer separators, and DreamWeaver Gold 40 non-woven separator. Significant amount of anisotropy of properties was determined, with the Young's modulus being different by up to a factor of 5 and ultimate strength being different by a factor of 10 between orthogonal directions within a polymer separator layer. Strain rate sensitivity was investigated by applying strain rates ranging from 1•10 -4 s -1 to 0.1 s -1 . Significant strengthening was observed and the strain rate strengthening coefficients were determined for both elastic modulus and yield stress in case of polymer separators. Digital image correlation technique was used to measure and map the strains over the specimen's gage section. A significant strain concentration in bands running perpendicular to the tensile axis was observed in polymer separator samples oriented in transverse direction. Such localized necking allows for extremely high strains close to 300% to develop in the material. Furthermore, the failure mode was remarkably different for all three types of separators which adds additional variable in safe design of Li-ion batteries for prevention of internal short circuits.

25 ENERGY STORAGE↗
DOE OSTI2017

Strain distribution and failure mode of polymer separators for Li-ion batteries under biaxial loading

Deformation of polymer separators for Li-ion batteries has been studied under biaxial tension by using a dome test setup. This deformation mode provides characterization of separator strength under more complex loading conditions, closer representing deformation of an electric vehicle battery during crash event, compared to uniaxial tension or compression. Two polymer separators, Celgard 2325 and Celgard 2075 were investigated by deformation with spheres of three different diameters. Strains in separators were measured in situ by using Digital Image Correlation (DIC) technique. The results show consistent rupture of separators along the machine direction coinciding with areas of high strain accumulation. The critical first principal strain for failure was independent of the sphere diameter and was determined to be approximately 34% and 43% for Celgard 2325 and Celgard 2075 respectively. These values can be taken as a criterion for internal short circuit in a battery following an out-of-plane impact. A Finite Element (FE) model was built with the anisotropic description of separator behavior, derived from tensile tests in orthogonal directions. In conclusion, the results of simulations predicted the response of separator rather well when compared to experimental results for various sizes of rigid sphere.

25 ENERGY STORAGE↗
DOE OSTI2021

Al 2 O 3 /TiO 2 coated separators: Roll-to-roll processing and implications for improved battery safety and performance

Heat generation is one of the major concerns with lithium-ion batteries (LIB) while charging them at higher currents, which could inadvertently impact the rate performance and reduce the safety of the cell. Polymer separator is one of the least thermal conductive components of a LIB. In addition, commercial separators for LIB are made from polyolefin membranes that tend to shrink and curl at higher temperatures due to their lower melting temperature (~130 °C). Developing separators with improved thermal stability and higher electrolyte uptake is essential for enhancing the safety as well as the performance of the LIB. In this work, a thin layer of ceramic coatings (Al 2 O 3 and TiO 2 ) is applied on propylene (PP) membrane to improve the thermal stability and electrolyte affinity without compromising the rate performance. A slurry with 100% Al 2 O 3 coated on the polypropylene separator exhibited the best improvement in thermal stability ( shrinkage of 0.6% vs 6.0% for uncoated membrane) and excellent rate performance with 92% capacity retention at 2C. The Al 2 O 3 coated separator demonstrated excellent electrolyte wettability compared to the uncoated membrane. The cross-plane thermal conductivity of the ceramic coated separators is analyzed to understand their heat transfer behavior. The thermal conductivity of the separator is improved by ~3.2 times with the Al 2 O 3 coating.

25 ENERGY STORAGE↗
DOE OSTI2024

Static and Dynamic Thermomechanical Properties of Phase-Separated Epoxy Networks with Tuned Microstructures

Here, polymerization-induced phase separation is a useful method for the construction of heterogeneous epoxy networks with properties exceeding their homogeneous counterparts. In this work, we examine the static and dynamic thermomechanical properties of phase-separated epoxy networks salient to their application as encapsulants. Three heterogeneous epoxy-amine networks with nano-, meso-, and macro-phase-separated morphologies comprised of hard and soft domains are compared to a rigid, unstructured network. The glass transition profiles of the heterogeneous networks are complex, spanning many decades in the frequency domain. The nanophase-separated morphology leads to higher coefficient of thermal expansion, yet surprisingly is characterized by reduced residual stress. Under both quasi-static and dynamic compression (strain rates of order 10 –3 and 10 3 s –1 , respectively), the nanophase-separated network also exhibits higher modulus and strength. In split-Hopkinson bar experiments, the energy dissipation characteristics of the epoxy networks were nearly identical. Curiously, however, the Hugoniot response of the macro-phase-separated network determined by ballistic shockwave analysis indicates a remarkable ability of this material to mitigate shockwave propagation in comparison to many homogeneous and heterogeneous polymer materials. Collectively, this work reveals several previously unreported phenomena with respect to structure–property relationships in phase-separated epoxy networks, illustrating the potential value of systematically tuned microstructures for optimization of application-specific physical properties.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Supramolecular Assembly of Lanthanide-Binding Tag Peptides for Aqueous Separation of Rare Earth Elements

Selective and eco-friendly separation and purification methods for rare earth elements (REEs) are necessary to meet the increasing demand for these valuable metals, which are extensively used in modern electronics and clean energy technologies. Mining feedstocks consist of REE mixtures as stable trivalent cations (Ln 3+ ) that are difficult to separate due to their identical charge and similar size. Lanthanide-binding tags (LBTs), peptide chelates that coordinate Ln 3+ in binding pockets, show promise as selective, high-affinity extractants. We demonstrate that the LBT variant LBTLLA 5– , designed for high selectivity for Tb 3+ , is an effective extractant, forming complexes with REEs in solution that subsequently organize into self-assembling structures rich in Ln 3+ . These structures condense into aggregates that can be separated, enabling an efficient, all-aqueous, eco-friendly separation process. The self-assembled structures are studied using dynamic light scattering, ζ-potential measurements, transmission electron microscopy, anomalous small-angle X-ray scattering, inductively coupled plasma optical emission spectroscopy, and ultraviolet–visible absorption spectroscopy, which confirm LBTLLA 5– peptide-REE ion binding and the further assembly of micron-scale structures rich in REEs. Molecular dynamics simulations reveal the interactions promoting aggregation as well as the integrity of the binding pocket upon self-assembly. We find that LBTLLA 5– :Ln 3+ complexes recruit excess cations within the macrostructures, and we demonstrate that aggregation and selective separation can be controlled by manipulating the metal-peptide ratio in solution. Furthermore, we demonstrate separation from equimolar mixtures of REE pairs Tb 3+ -Lu 3+ and Tb 3+ -La 3+ , supporting the application of LBT peptides as a platform for the selective separation of REEs.

LBT peptides↗
DOE OSTI2022

Modeling Isotope Separation in Electrochemical Lithium Deposition

Naturally occurring Li consists of two stable isotopes, 6 Li with an abundance of about 7.5%, and 7 Li making up the remainder with 92.5%. The development of a 6 Li enrichment technique, in terms of technical reliability and environmental safety to reach 6 Li future requirements, represents a key step in the roadmap for nuclear fusion energy supply worldwide. This paper uses finite element analysis-based models to simulate electrochemical Li isotope separation, which is an attractive method in terms of simplicity, safety, and scalability. In the model, we quantitatively analyze how different electrochemical factors including thermodynamics, charge-transfer kinetics, and diffusivities affect the separation process (separation factor), together with cell parameters, such as cell length and current density. The maximum separation factor of 1.128 could be obtained with the cell under the optimal thermodynamic, kinetic, and diffusive conditions, which is among the highest separation factors ever reported. Furthermore, these results will assist in designing the actual isotope separation setup with large separation factor and appropriate timing for sample collection.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2018

Surface-Engineered Inorganic Nanoporous Membranes for Vapor and Pervaporative Separations of Water–Ethanol Mixtures

Surface wettability-tailored porous ceramic/metallic membranes (in the tubular and planar disc form) were prepared and studied for both vapor-phase separation and liquid pervaporative separations of water-ethanol mixtures. Superhydrophobic nanoceramic membranes demonstrated more selective permeation of ethanol (relative to water) by cross-flow pervaporation of liquid ethanol–water mixture (10 wt % ethanol feed at 80 °C). In addition, both superhydrophilic and superhydrophobic membranes were tested for the vapor-phase separations of water–ethanol mixtures. Porous inorganic membranes having relatively large nanopores (up to 8-nm) demonstrated good separation selectivity with higher permeation flux through a non-molecular-sieving mechanism. Due to surface-enhanced separation selectivity, larger nanopore-sized membranes (~5–100 nm) can be employed for both pervaporation and vapor phase separations to obtain higher selectivity (e.g., permselectivity for ethanol of 13.9 during pervaporation and a vapor phase separation factor of 1.6), with higher flux due to larger nanopores than the traditional size-exclusion membranes (e.g., inorganic zeolite-based membranes having sub-nanometer pores). The prepared superhydrophobic porous inorganic membranes in this work showed good thermal stability (i.e., the large contact angle remains the same after 300 °C for 4 h) and chemical stability to ethanol, while the silica-textured superhydrophilic surfaced membranes can tolerate even higher temperatures. These surface-engineered metallic/ceramic nanoporous membranes should have better high-temperature tolerance for hot vapor processing than those reported for polymeric membranes.

09 BIOMASS FUELS↗
DOE OSTI2025

Interphase Engineering Enabled by Using a Separator with Electrochemically Active Carbazole Polymers for Lithium-Ion Batteries

Separators are generally considered inert components in lithium-ion batteries. In the past, some electroactive polymers have been successfully applied in separator modifications for overcharge protection or as acid scavengers. This study highlights the first use of two “electroactive” carbazole polymers (copolymer 9-phenyl-9H-carbazole-phenyl [PCP] and poly(9-vinylcarbazole) [PVC]), which were each applied separately as coatings on the cathode-facing side of commercial Celgard 2325 separators, respectively, to enhance the cycling performance of 0.3Li 2 MnO 3 ·0.7LiMn 0.5 Ni 0.5 O 2 //graphite (LMR-NM//Gr) full cells through interphase engineering. The team observed an irreversible polymer oxidation process of the carbazole-functionalized polymers—occurring only during the first charge—for the modified separator cells, and the results were confirmed by dQ/dV analysis, cyclic voltammetry measurements, and nuclear magnetic resonance characterizations. During this oxidation, carbazole polymers participate in the process of interphase formation, contributing to the improved cycling performance of LMR-NM//Gr batteries. Particularly, oxidation takes place at voltages of ~4.0 and ~3.5 V when PCP and PVC are used as separator coatings, which is highly irreversible. Further postmortem examinations suggest that the improvements using these modified separators arise from the formation of higher-quality and more inorganic SEI, as well as the beneficial CEI enriched in LixPOyFz. These interphases effectively inhibit the crosstalk effect by reducing TM dissolution.

carbazole↗
DOE OSTI2020

Ion separations with membranes

Ion separations are important for resource recovery, water treatment, and energy production and storage. Techniques such as chemical precipitation, selective adsorption, and solvent extraction are effective, but membranes may separate ions continuously with less waste and lower energy costs. Separation of monovalent and multivalent ions with nanofiltration or electrodialysis membranes already enables water softening and edible salt purification. Similar membranes are attractive as separators in vanadium redox flow batteries. Selective partitioning of divalent counter-ions into ion-exchange membranes even allows transport of these ions against their concentration gradients in salt mixtures. However, separations of ions with the same charge is more challenging. Recent research demonstrated highly selective ion “sieving” at small scales. Here, separations using electrical potentials and differences in ion electrophoretic mobilities are promising, but relatively unexplored. Carrier-mediated transport affords high selectivity in liquid membranes, but these systems are not very stable, and selective transport via hopping between anchored carriers has proven elusive. Finally, this paper discusses how concentration polarization decreases selectivities in many membrane processes. Although development of selective, inexpensive ion-separation membranes is a work in progress, successes in water softening and edible salt purification suggests that future selective membranes will serve as complementary methods to traditional purification techniques.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2018

Rapid Separation of Copper Phase and Iron-Rich Phase From Copper Slag at Low Temperature in a Super-Gravity Field

A novel approach for quickly separating a metal copper phase and iron-rich phase from copper slag at low temperature is proposed based on a super-gravity method. The morphology and mineral evolution of the copper slag with increasing temperature were studied using in situ high-temperature confocal laser scanning microscopy and ex situ scanning electron microscopy and X-ray diffraction methods. Fe{sub 3}O{sub 4} particles dispersed among the copper slag were transformed into FeO by adding an appropriate amount of carbon as a reducing agent, forming the slag melt with SiO{sub 2} at low temperature and assisting separation of the copper phase from the slag. Consequently, in a super-gravity field, the metallic copper and copper matte were concentrated as the copper phase along the super-gravity direction, whereas the iron-rich slag migrated in the opposite direction and was quickly separated from the copper phase. Increasing the gravity coefficient (G) significantly enhanced the separation efficiency. After super-gravity separation at G = 1000 and 1473 K (1200 °C) for 3 minutes, the mass fraction of Cu in the separated copper phase reached 86.11 wt pct, while that in the separated iron-rich phase was reduced to 0.105 wt pct. The recovery ratio of Cu in the copper phase was as high as up to 97.47 pct.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Influence of ion-pairing reagents on the separation of intact glycoproteins using hydrophilic-interaction liquid chromatography - high-resolution mass spectrometry

Hydrophilic-interaction liquid chromatography (HILIC) of intact proteins offers high-resolution separations of glycoforms of glycoproteins differing in the number of (neutral) glycans. However, to obtain efficient separations it is essential that the positively charged sites of the proteins are shielded by acidic (negative) ion-pair reagents (IPRs), so as to enhance the contribution of the hydroxyl groups of the (neutral) sugars in the glycoprotein. Here, we studied the influence of various IPRs that differ in physico-chemical properties, such as hydrophobicity and acidity, on the capillary-scale HILIC separation of intact (glyco)proteins. We evaluated the use of fluoroacetic acid (MFA), difluoroacetic acid (DFA), trifluoroacetic acid (TFA), and heptafluorobutyric acid (HFBA) as diluents for sample preparation, as solvents for sample loading on a reversed-phase trap prior to the HILIC separation, and as mobile-phase components for HILIC and HILIC-MS. To reduce the contribution of ion-exchange interaction with the (silica-based) stationary phase, we used an acrylamide-based monolithic column. We studied the influence of the different IPRs on each step of the separation of a mixture of proteins of different size and hydrophilicity and on the separation of the five glycoforms of ribonuclease B. The content of IPR in the sample was shown not to affect the separation and the MS detection. However, a low content of TFA and DFA in the mobile phase is favourable, as it reduces adduct formation and leads to higher signal intensity. The optimized HILIC conditions successfully resolved nine major glycoforms groups of a ~40 kDa glycoprotein horseradish peroxidase (HRP), as an example of a complex glycoprotein.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2024

Group hexavalent actinide separation from lanthanides using sodium bismuthate chromatography

Advanced used nuclear fuel (UNF) reprocessing strategies are limited by the complex radiochemical separations and engineering required to achieve the separation of actinides (An) from neutron scavenging lanthanides (Ln). The accessibility of the hexavalent oxidation state for the actinides (U – Am) provides a pathway to achieving a group hexavalent actinide separation from the trivalent lanthanides and Cm. The solid oxidant and ion exchanger, sodium bismuthate (NaBiO 3 ), has been demonstrated to quantitatively oxidize and separate Am from trivalent Cm in a column chromatographic system. This work expands on the use of NaBiO 3 chromatography to characterize the adsorption, kinetic, and elution behavior of U, Pu, and Eu. Separation factors over 200 with rapid kinetics were observed at dilute nitric acid concentrations with a complete An/Ln separation achieved in under an hour. In conclusion, the adsorption and chromatographic behavior of key fission products present in various reprocessing raffinates was characterized which demonstrated potential application of a NaBiO 3 -based separation following a TRUEX process.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2023

Carbon molecular-sieve membranes developed from a Tröger’s base polymer and possessing superior gas-separation performance

Carbon molecular-sieve membranes possess tremendous practical advantages over unary polymer membranes by providing high gas-separation performance levels, coupled with excellent mechanical and chemical stability. Improving their overall effectiveness greatly expands the competitiveness of this class of membranes. In the present study, carbon membranes are fabricated from a Tröger’s base polymer as the precursor. Further, by optimizing the carbonization conditions, the gas-separation performance of the resultant membranes are significantly enhanced. Under optimized conditions, a H 2 permeability of up to 1135 Barrer is achieved, with a corresponding H 2 /CH 4 selectivity of 1170 and a CO 2 /CH 4 selectivity of 238. While increasing the operating temperature slightly reduces the selectivity, it still remains in the high-separation region. Overall, the measured separation performance levels for H 2 -related separations, i.e., H 2 /CH 4 , H 2 /N 2 and H 2 /CO 2 , all substantially exceed the Robeson upper bound. Moreover, the CO 2 /CH 4 separation efficacy also lies above the 2019 upper bound, indicating that the carbon membranes developed in the present work are versatile and promising for many different gas-separation applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2013

Effects of chemical composition of fly ash on efficiency of metal separation in ash-melting of municipal solid waste

Highlights: ► Separation of Pb and Zn from Fe and Cu in ash-melting of municipal solid waste. ► Molar ratio of Cl to Na and K in fly ash affected the metal-separation efficiency. ► The low molar ratio and a non-oxidative atmosphere were better for the separation. - Abstract: In the process of metal separation by ash-melting, Fe and Cu in the incineration residue remain in the melting furnace as molten metal, whereas Pb and Zn in the residue are volatilized. This study investigated the effects of the chemical composition of incineration fly ash on the metal-separation efficiency of the ash-melting process. Incineration fly ash with different chemical compositions was melted with bottom ash in a lab-scale reactor, and the efficiency with which Pb and Zn were volatilized preventing the volatilization of Fe and Cu was evaluated. In addition, the behavior of these metals was simulated by thermodynamic equilibrium calculations. Depending on the exhaust gas treatment system used in the incinerator, the relationships among Na, K, and Cl concentrations in the incineration fly ash differed, which affected the efficiency of the metal separation. The amounts of Fe and Cu volatilized decreased by the decrease in the molar ratio of Cl to Na and K in the ash, promoting metal separation. The thermodynamic simulation predicted that the chlorination volatilization of Fe and Cu was prevented by the decrease in the molar ratio, as mentioned before. By melting incineration fly ash with the low molar ratio in a non-oxidative atmosphere, most of the Pb and Zn in the ash were volatilized leaving behind Fe and Cu.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2020

Liquid–Liquid Phase Separation in Supermicrometer and Submicrometer Aerosol Particles

The interactions of aerosol particles with light and clouds are among the most uncertain aspects of anthropogenic climate forcings. The effects of aerosol particles on climate depend on their optical properties, heterogeneous chemistry, water uptake behavior, and ice nucleation activity. These properties in turn depend on aerosol physics and chemistry including composition, size, shape, internal structure (morphology), and phase state. The greatest numbers of particles are found at small, submicrometer sizes, and the properties of aerosol particles can differ on the nanoscale compared with measurements of bulk materials. As a result, our focus has been on characterizing the phase transitions of aerosol particles in both supermicrometer and submicrometer particles. The phase transition of particular interest for us has been liquid–liquid phase separation (LLPS), which occurs when components of a solution phase separate due to a difference in solubilities. For example, organic compounds can have limited solubility in salt solutions especially as the water content decreases, increasing the concentration of the salt solution, and causing phase separation between organic-rich and inorganic-rich phases. To characterize the systems of interest, we primarily use optical microscopy for supermicrometer particles and cryogenic-transmission microscopy for submicrometer particles. This Account details our main results to date for the phase transitions of supermicrometer particles and the morphology of submicrometer aerosol. Herein, we have found that the relative humidity (RH) at which LLPS occurs (separation RH; SRH) is highly sensitive to the composition of the particles. For supermicrometer particles, SRH decreases as the pH is lowered to atmospherically relevant values. SRH also decreases when non-phase-separating organic compounds are added to the particles. For submicrometer particles, a size dependence of morphology is observed in systems that undergo LLPS in supermicrometer particles. In the limit of slow drying rates, particles <30 nm are homogeneous and larger particles are phase-separated. This size dependence of aerosol morphology arises because small particles cannot overcome the activation barrier needed to form a new phase when phase separation occurs by a nucleation and growth mechanism. Additionally, the inhibition of LLPS in small particles is observed for mixtures of ammonium sulfate with single organic compounds as well as complex organics like α-pinene secondary organic matter. The morphology of particles affects activation diameters for the formation of cloud condensation nuclei. These results more generally have implications for aerosol properties that affect the climate system. In addition, LLPS is also widely studied in materials and biological chemistry, and our results could potentially translate to implications for these fields.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗