Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “root dynamics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
NASA NTRS1994

Flutter suppression digital control law design and testing for the AFW wind tunnel model

The design of a control law for simultaneously suppressing the symmetric and antisymmetric flutter modes of a sting mounted fixed-in-roll aeroelastic wind-tunnel model is described. The flutter suppression control law was designed using linear quadratic Gaussian theory, and it also involved control law order reduction, a gain root-locus study, and use of previous experimental results. A 23 percent increase in the open-loop flutter dynamic pressure was demonstrated during the wind-tunnel test. Rapid roll maneuvers at 11 percent above the symmetric flutter boundary were also performed when the model was in a free-to-roll configuration.

Mukhopadhyay, Vivek↗
NASA NTRS1961

Experimental Studies of Flutter of Buckled Rectangular Panels at Mach Numbers from 1.2 to 3.0 Including Effects of Pressure Differential and of Panel Width-Length Ratio

Experimental panel flutter data have been obtained at Mach numbers from 1.2 to 3.0 for buckled rectangular panels and the effect of a pressure differential has been determined. Increasing the pressure differential was effective in eliminating flutter on most of the panels tested. The effects of the variables in the panel flutter parameter ((square root of m(exp 2) -1) * (E/q))(exp 1/3) t/l (where M is the Mach number, q is the dynamic pressure, E is Young's modulus, and t and l are the panel thickness and length, respectively) were investigated for buckled panels clamped on the front and rear edges and a critical value of this parameter of 0.44 is indicated at zero pressure differential when the panel width-length ratio is 0.69. An estimated flutter boundary is presented for buckled panels clamped on four edges, with width-length ratios of 0.21 to 4.0. This boundary shows that the panel width is more significant than the panel length when the ratio of width to length is less than approximately 0.5. Panels clamped on four edges and buckled in two half waves in the direction of flow were found to be particularly susceptible to flutter. The results of limited tests on panels with applied damping, curvature, and lengthwise stiffeners are also presented and discussed.

Sylvester, Maurice A.↗
NASA NTRS1997

Density and composition of microorganisms during long-term (418 day) growth of potato using biologically reclaimed nutrients from inedible plant biomass

A study evaluating alternative methods for long term operation of biomass production systems was recently completed at the Kennedy Space Center (KSC). The 418-day study evaluated repeated batch versus mixed-aged production of potato grown on either standard 1/2-strength Hoagland's nutrient solution or solutions including nutrients recycled from inedible plant material. The long term effects of closure and recycling on microbial dynamics were evaluated by monitoring the microbial communities associated with various habitats within the plant growth system (i.e., plant roots, nutrient solution, biofilms within the hydroponic systems, atmosphere, and atmospheric condensate). Plate count methods were used to enumerate and characterize microorganisms. Microscopic staining methods were used to estunate total cell densities. The primary finding was that the density and composition of microbial communities associated with controlled environmental plant growth systems are stable during long term operation. Continuous production resulted in slightly greater stability. Nutrient recycling, despite the addition of soluble organic material from the waste processing system, did not significantly increase microbial density in any of the habitats.

NASA Center KSC↗
DOE OSTI2022

Arbuscular Mycorrhizal Tree Communities Have Greater Soil Fungal Diversity and Relative Abundances of Saprotrophs and Pathogens than Ectomycorrhizal Tree Communities

Trees associating with different mycorrhizas often differ in their effects on litter decomposition, nutrient cycling, soil organic matter (SOM) dynamics, and plant-soil interactions. For example, due to differences between arbuscular mycorrhizal (AM) and ectomycorrhizal (ECM) tree leaf and root traits, ECM-associated soil has lower rates of C and N cycling and lower N availability than AM-associated soil. These observations suggest that many groups of nonmycorrhizal fungi should be affected by the mycorrhizal associations of dominant trees through controls on nutrient availability. To test this overarching hypothesis, we explored the influence of predominant forest mycorrhizal type and mineral N availability on soil fungal communities using next-generation amplicon sequencing. Soils from four temperate hardwood forests in southern Indiana, United States, were studied; three forests formed a natural gradient of mycorrhizal dominance (100% AM tree basal area to 100% ECM basal area), while the fourth forest contained a factorial experiment testing long-term N addition in both dominant mycorrhizal types. We found that overall fungal diversity, as well as the diversity and relative abundance of plant pathogenic and saprotrophic fungi, increased with greater AM tree dominance. Additionally, tree community mycorrhizal associations explained more variation in fungal community composition than abiotic variables, including soil depth, SOM content, nitrification rate, and mineral N availability. Our findings suggest that tree mycorrhizal associations may be good predictors of the diversity, composition, and functional potential of soil fungal communities in temperate hardwood forests. These observations help explain differing biogeochemistry and community dynamics found in forest stands dominated by differing mycorrhizal types.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2025

A Finite Element Method for Compressible and Turbulent Multiphase Flow Instabilities with Heat Transfer

We present a new finite element framework for modeling compressible, turbulent multiphase flows with heat transfer. For two-fluid systems with a free surface, the Volume of Fluid (VOF) method is implemented without the need for interface reconstruction, while turbulence is resolved using a dynamic Vreman large eddy simulation (LES) model. Unlike most two-phase VOF studies, which neglect heat transfer, the present approach incorporates energy transport equations within the VOF formulation to account for heat exchange, an effect particularly important in turbulent flows. Conjugate heat transfer is often challenging in finite volume methods, which require explicit specification of heat fluxes at the solid–fluid interface, limiting accuracy and predictive capability. By contrast, the finite element formulation does not require heat flux inputs, allowing more accurate and robust simulation of heat transfer between solids and fluids. The method is demonstrated through three representative cases. First, a two-fluid instability with a single-mode perturbation is simulated and validated against analytical growth rates. Second, conjugate heat transfer is examined in a high-temperature flow over a cold metal cylinder, with validation performed both quantitatively—via pressure coefficient comparisons with experimental data—and qualitatively using vector field topology. Finally, compressible spray injection and breakup are modeled, demonstrating the ability of the framework to capture interfacial dynamics and atomization under turbulent, high-speed conditions. In the compressible spray injection and breakup case, the results indicate that the finite element formulation achieved higher predictive accuracy and robustness than the finite-volume method. With the same mesh resolution, the FEM reduced the root mean square error (RMSE) and mean absolute percentage error (MAPE) from 6.96 mm and 26.0% (for the FVM) to 4.85 mm and 12.7%, respectively, demonstrating improved accuracy and robustness in capturing interfacial dynamics and heat transfer. The study also introduced vector field topology to visualize and interpret coherent flow structures and instabilities, offering insights beyond conventional scalar-field analyses.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS1989

Dynamic sea surface topography, gravity and improved orbit accuracies from the direct evaluation of SEASAT altimeter data

A method for the simultaneous solution of dynamic ocean topography, gravity and orbits using satellite altimeter data is described. A GEM-T1 based gravitational model called PGS-3337 that incorporates Seasat altimetry, surface gravimetry and satellite tracking data has been determined complete to degree and order 50. The altimeter data is utilized as a dynamic observation of the satellite's height above the sea surface with a degree 10 model of dynamic topography being recovered simultaneously with the orbit parameters, gravity and tidal terms in this model. PGS-3337 has a geoid uncertainty of 60 cm root-mean-square (RMS) globally, with the uncertainty over the altimeter tracked ocean being in the 25 cm range. Doppler determined orbits for Seasat, show large improvements, with the sub-30 cm radial accuracies being achieved. When altimeter data is used in orbit determination, radial orbital accuracies of 20 cm are achieved. The RMS of fit to the altimeter data directly gives 30 cm fits for Seasat when using PGS-3337 and its geoid and dynamic topography model. This performance level is two to three times better than that achieved with earlier Goddard earth models (GEM) using the dynamic topography from long-term oceanographic averages. The recovered dynamic topography reveals the global long wavelength circulation of the oceans with a resolution of 1500 km. The power in the dynamic topography recovery is now found to be closer to that of oceanographic studies than for previous satellite solutions. This is attributed primarily to the improved modeling of the geoid which has occurred. Study of the altimeter residuals reveals regions where tidal models are poor and sea state effects are major limitations.

Marsh, J. G.↗
DOE OSTI2025

All-Atom Modeling and Simulation of Biopolymer Interface: Dual Role of Antifouling Polymer Brushes

Antifouling polymer brushes are well-known for their exceptional resistance to unwanted protein adsorption. While experimental studies have extensively characterized protein–polymer brush interactions, computational investigations remain limited, largely due to the challenges in accurately modeling and integrating these complex, multicomponent systems without resorting to oversimplification. To address this challenge, this study presents one of the most comprehensive and realistic model systems to date, comprising the substrate, grafted polymers, and proteins. Our work interprets the interactions between polymer brush and protein based on realistic modeling without simplification. In particular, this study utilizes molecular modeling and simulation of polycationic and polyzwitterionic brushes─poly(dimethylaminoethyl methacrylate) (PDMAEMA), poly(2-(N-oxide-N,N-dimethylamino)ethyl methacrylate) (PNOMA), and poly(2-(N-3-sulfopropyl-N,N-dimethylammonium)ethyl methacrylate) (PSBMA)─grafted onto α-quartz substrates via polymerization initiator linkers. The brush models were developed to closely replicate experimentally synthesized samples and to provide detailed insights into structural and dynamical changes at the molecular level during protein adsorption. Using steered molecular dynamics simulations, we show that the PSBMA brush, due to its high local density, exhibits the greatest resistance to protein insertion. Cα root-mean-square deviation and interaction pattern analyses further reveal that the PSBMA brush also induces the most significant destabilization of lysozyme, while the PDMAEMA brush enhances protein stability through ion-mediated interactions. The PNOMA brush, while requiring the lowest force for protein adsorption, induces greater protein destabilization than the PDMAEMA brush, primarily due to electrostatic repulsion caused by a short carbon spacer length. Hydration analysis reveals that both the PSBMA brush and the lysozyme interacting with it exhibit the most rapid dehydration, attributed to the brush’s high local chain density, which results in the greatest lysozyme destabilization and the highest adsorption force. These findings highlight the dual role of antifouling polymer brushes: resisting protein adsorption and modulating protein structural dynamics. In conclusion, this study provides valuable insights for the rational design of next-generation antifouling materials and offers a framework for realistic model development in complex multicomponent systems.

Adsorption↗
DOE OSTI2021

Microbial seasonality promotes soil respiratory carbon emission in natural ecosystems: A modeling study

Seasonality is a key feature of the biosphere and the seasonal dynamics of soil carbon (C) emissions represent a fundamental mechanism regulating the terrestrial–climate interaction. We applied a microbial explicit model—CLM-Microbe—to evaluate the impacts of microbial seasonality on soil C cycling in terrestrial ecosystems. Additionally, the CLM-Microbe model was validated in simulating belowground respiratory fluxes, that is, microbial respiration, root respiration, and soil respiration at the site level. On average, the CLM-Microbe model explained 72% (n = 19, p < 0.0001), 65% (n = 19, p < 0.0001), and 71% (n = 18, p < 0.0001) of the variation in microbial respiration, root respiration, and soil respiration, respectively. We then compared the model simulations of soil respiratory fluxes and soil organic C content in top 1 m between the CLM-Microbe model with (CLM-Microbe) and without (CLM-Microbe_wos) seasonal dynamics of soil microbial biomass in natural biomes. Removing soil microbial seasonality reduced model performance in simulating microbial respiration and soil respiration, but led to slight differences in simulating root respiration. Compared with the CLM-Microbe, the CLM-Microbe_wos underestimated the annual flux of microbial respiration by 0.6%–32% and annual flux of soil respiration by 0.4%–29% in natural biomes. Correspondingly, the CLM-Microbe_wos estimated higher soil organic C content in top 1 m (0.2%–7%) except for the sites in Arctic and boreal regions. Our findings suggest that soil microbial seasonality enhances soil respiratory C emissions, leading to a decline in SOC storage. An explicit representation of soil microbial seasonality represents a critical improvement for projecting soil C decomposition and reducing the uncertainties in global C cycle projection under the changing climate.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2020

Persistence and Plasticity in Conifer Water–Use Strategies

The selective use of seasonal precipitation by vegetation is critical to understanding the residence time and flow path of water in watersheds, yet there are limited datasets to test how climate alters these dynamics. Here, we use measurements of the seasonal cycle of tree ring δ 18 O for two widespread conifer species in the Rocky Mountains of North America to provide a multi-decadal depiction of the seasonal origins of forest water use. The results show that while the conifer tree stands had a dominant preference for use of snowmelt, there were multi-annual periods over the last four decades when use of summer precipitation was preferential. Utilization of summer rain emerged during years with increased snowfall and tree growth, suggesting that summer rain enhanced the transpiration stream only during the periods of highest water use. We hypothesize this could be explained through shallowing of the root profile during wetter periods and/or through the influence of changing water table depths on the residence time of summer precipitation in the root zone. We suggest the tree ring proxy approach used here could be applied in other watersheds to provide critical insight into the temporal dynamics of plant water use that could not be inferred from short measurement campaigns. Furthermore, these data on the seasonal origins of forest water are critical for understanding forest vulnerability to drought, the processes that affect precipitation pathways and residence time in watersheds and the interpretation of tree ring proxy data.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Whole plant traits of coastal dune vegetation and implications for interactions with dune dynamics

Abstract Coastal dunes are important protective features against sea level rise and coastal storms. Interactions between dune plant aboveground structures and sediment trapping that allow for dune building and maintenance are well established. More recently, studies documenting belowground biomass for promoting erosion resistance in dominant dune species have been conducted, yet a knowledge gap remains regarding species‐specific characterization of whole plants, specifically with respect to roots, rhizomes, and belowground stems. Our objective was to quantify above‐ and belowground traits of four dominant dune grasses to document the potential for species‐specific effects on dune growth, maintenance, and erosion resistance. We examined above‐ and belowground traits among four prominent dune grasses of the Atlantic and Gulf Coasts of North America: Ammophila breviligulata , Panicum amarum , Spartina patens , and Uniola paniculata . Whole plant samples of each species were collected from the foredune at the US Army Engineer Research and Development Center's Field Research Facility in Duck, North Carolina, USA, and quantified for several above‐ and belowground traits (e.g., stem height, rhizome number and length, root surface area by diameter class, root tensile strength, and mycorrhizal percent infection). Belowground factors known to impact important dune processes, such as rhizome length, mycorrhizal percent infection, and root traits, differed substantially among species. When visualized in multivariate space, all species significantly differed in suites of above‐ and belowground traits. When considering belowground only, Ammophila and Spartina were similar, despite differences in biomass allocation. Species separated along axes related to mycorrhizal association, biomass allocation, and root construction. The four co‐occurring dune grass species were dissimilar in suites of plant traits. Belowground trait differences were driven by those describing root construction, biomass allocation, and mycorrhizal infection. Dissimilarity in above‐ and belowground suites of traits may demonstrate different approaches for surviving the dune environment. Incorporating belowground traits into modeling will enhance predictions of dune response to climate change through interactions between vegetation and dune dynamics that facilitate coastal resistance and resilience.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Uptake and speciation of zinc in edible plants grown in smelter contaminated soils

Heavy metal accumulation in edible plants grown in contaminated soils poses a major environmental risk to humans and grazing animals. This study focused on the concentration and speciation of Zn in different edible plants grown in soils contaminated with smelter wastes (Spelter, WV, USA) containing high levels of the metals Zn, Cu, Pb, Cd. Their accumulation was examined in different parts (roots, stem, and leaves) of plants and as a function of growth stage (dry seed, sprouting seed, cotyledon, and leaves) in the root vegetables radish, the leafy vegetable spinach and the legume clover. Although the accumulation of metals varied significantly with plant species, the average metal concentrations were [Zn] > [Pb] > [Cu] > [Cd]. Metal uptake studies were complemented with bulk and micro X-ray absorption spectroscopy (XAS) at Zn K-edge and micro X-ray fluorescence (μXRF) measurements to evaluate the speciation and distribution of Zn in these plant species. Dynamic interplay between the histidine and malate complexation of Zn was observed in all plant species. XRF mapping of spinach leaves at micron spatial resolution demonstrated the accumulation of Zn in vacuoles and leaf tips. Radish root showed accumulation of Zn in root hairs, likely as ZnS nanoparticles. At locations of high Zn concentration in spinach leaves, μXANES suggests Zn complexation with histidine, as opposed to malate in the bulk leaf. These findings shed new light on the dynamic nature of Zn speciation in plants.

59 BASIC BIOLOGICAL SCIENCES↗
NASA NTRS1994

(abstract) Monitoring the Freeze/Thaw Transitions in Taiga Forests Using ERS-1 SAR

Automated recording stations have been installed at the Bonanza Creek Experimental Forest, a Long Term Ecological Research (LTER) site located near Fairbanks, Alaska, in a forest stand of the Tanana River floodplain underlain by discontinuous permafrost. These stations provide a continuous record of dielectric constant and temperature of tree trunks, and soil moisture and temperature profiles down to the root zone. Along with the weather stations deployed at the same location, these measurements provide a continuous record of the environmental and phenologic conditions of the forest during a complete seasonal cycle. At the same time, ERS-1 SAR imaged the study site repeatedly from space to provide radar backscatter measurements of the forest approximately three times a month. Here, we examine the temporal dynamic of ERS-1 SAR measurements in relation with the changing environmental and phenologic state of the forest canopy and of the forest ground layers during the winter/spring and fall/winter transitions of 1992 and 1993. During these transitions, we examine whether changes in radar backscatter observed by ERS-1 may be related to freezing or thawing of the soil and vegetation in order to determine the start and end of the growing season for the forest. The results of this analysis are used in turn to determine whether similar changes are observed over larger regions. Mosaics of SAR data generated along three different North-South Alaskan ERS-1 transects that intercept with our study site are used in combination with hourly air temperature and daily precipitation rates gathered at airport weather stations by the National Weather Service. Results obtained using ERS-1 data collected from January 1992 to mid-1993 will be discussed.

permafrost temporal dynamics Alaska ecology radar ↗
DOE OSTI2022

Dry Season Transpiration and Soil Water Dynamics in the Central Amazon

With current observations and future projections of more intense and frequent droughts in the tropics, understanding the impact that extensive dry periods may have on tree and ecosystem-level transpiration and concurrent carbon uptake has become increasingly important. Here, we investigate paired soil and tree water extraction dynamics in an old-growth upland forest in central Amazonia during the 2018 dry season. Tree water use was assessed via radial patterns of sap flow in eight dominant canopy trees, each a different species with a range in diameter, height, and wood density. Paired multi-sensor soil moisture probes used to quantify volumetric water content dynamics and soil water extraction within the upper 100 cm were installed adjacent to six of those trees. To link depth-specific water extraction patterns to root distribution, fine root biomass was assessed through the soil profile to 235 cm. To scale tree water use to the plot level (stand transpiration), basal area was measured for all trees within a 5 m radius around each soil moisture probe. The sensitivity of tree transpiration to reduced precipitation varied by tree, with some increasing and some decreasing in water use during the dry period. Tree-level water use scaled with sapwood area, from 11 to 190 L per day. Stand level water use, based on multiple plots encompassing sap flow and adjacent trees, varied from ∼1.7 to 3.3 mm per day, increasing linearly with plot basal area. Soil water extraction was dependent on root biomass, which was dense at the surface (i.e., 45% in the upper 5 cm) and declined dramatically with depth. As the dry season progressed and the upper soil dried, soil water extraction shifted to deeper levels and model projections suggest that much of the water used during the month-long dry-down could be extracted from the upper 2–3 m. Results indicate variation in rates of soil water extraction across the research area and, temporally, through the soil profile. These results provide key information on whole-tree contributions to transpiration by canopy trees as water availability changes. In addition, information on simultaneous stand level dynamics of soil water extraction that can inform mechanistic models that project tropical forest response to drought.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Dynamics of Fungal and Bacterial Biomass Carbon in Natural Ecosystems: Site-level Applications of the CLM-Microbe Model

Explicitly representing microbial processes has been recognized as a key improvement to Earth system models for the realistic projections of soil carbon (C) and climate dynamics. The CLM-Microbe model builds upon the CLM4.5 and explicitly represents two major soil microbial groups, fungi and bacteria. Based on the compiled time-series data of fungal (FBC) and bacterial (BBC) biomass C from nine biomes, we parameterized and validated the CLM-Microbe model, and further conducted sensitivity analysis and uncertainty analysis for simulating C cycling. The model performance was evaluated with mean absolute error (MAE), root mean square error (RMSE), and coefficient of determination (R2) for relative change in FBC and BBC. The CLM-Microbe model is able to reasonably capture the seasonal dynamics of FBC and BBC across biomes, particularly for tropical/subtropical forest, temperate broadleaf forest, and grassland, with MAE < 0.49 for FBC and <0.36 for BBC and RMSE <0.52 FBC and <0.39 for BBC, while R2 values are relatively smaller in some biomes (e.g., shrub) due to small sample sizes. We found good consistencies between simulated and observed FBC (R 2 =0.70, P<0.001) and BBC (R 2 =0.26, P<0.05) on average across biomes, but the model is not able to fully capture the large variation in observed FBC and BBC. Sensitivity analysis shows the most critical parameters are turnover rate, carbon-to-nitrogen ratio of fungi and bacteria, and microbial assimilation efficiency. This study confirms that the explicit representation of soil microbial mechanisms enhances model performance in simulating C variables such as heterotrophic respiration and soil organic C density. The further application of the CLM-Microbe model would deepen our understanding of microbial contributions to the global C cycle.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS2010

Method of Obtaining High Resolution Intrinsic Wire Boom Damping Parameters for Multi-Body Dynamics Simulations

The goal of NASA's Magnetospheric MultiScale (MMS) mission is to understand magnetic reconnection with sensor measurements from four spinning satellites flown in a tight tetrahedron formation. Four of the six electric field sensors on each satellite are located at the end of 60- meter wire booms to increase measurement sensitivity in the spin plane and to minimize motion coupling from perturbations on the main body. A propulsion burn however, might induce boom oscillations that could impact science measurements if oscillations do not damp to values on the order of 0.1 degree in a timely fashion. Large damping time constants could also adversely affect flight dynamics and attitude control performance. In this paper, we will discuss the implementation of a high resolution method for calculating the boom's intrinsic damping, which was used in multi-body dynamics simulations. In summary, experimental data was obtained with a scaled-down boom, which was suspended as a pendulum in vacuum. Optical techniques were designed to accurately measure the natural decay of angular position and subsequently, data processing algorithms resulted in excellent spatial and temporal resolutions. This method was repeated in a parametric study for various lengths, root tensions and vacuum levels. For all data sets, regression models for damping were applied, including: nonlinear viscous, frequency-independent hysteretic, coulomb and some combination of them. Our data analysis and dynamics models have shown that the intrinsic damping for the baseline boom is insufficient, thereby forcing project management to explore mitigation strategies.

Yew, Alvin G.↗
DOE OSTI2023

Expression of macromolecular organic nitrogen degrading enzymes identifies potential mediators of soil organic N availability to an annual grass

Abstract Nitrogen (N) is frequently limiting to plant growth, in part because most soil N is present as polymeric organic compounds that are not readily taken up by plants. Microbial depolymerization of these large macromolecular N-substrates gradually releases available inorganic N. While many studies have researched and modeled controls on soil organic matter formation and bulk N mineralization, the ecological—spatial, temporal and phylogenetic—patterns underlying organic N degradation remain unclear. We analyzed 48 time-resolved metatranscriptomes and quantified N-depolymerization gene expression to resolve differential expression by soil habitat and time in specific taxonomic groups and gene-based guilds. We observed much higher expression of extracellular serine-type proteases than other extracellular N-degrading enzymes, with protease expression of predatory bacteria declining with time and other taxonomic patterns driven by the presence (Gammaproteobacteria) or absence (Thermoproteota) of live roots and root detritus (Deltaproteobacteria and Fungi). The primary chitinase chit1 gene was more highly expressed by eukaryotes near root detritus, suggesting predation of fungi. In some lineages, increased gene expression over time suggests increased competitiveness with rhizosphere age (Chloroflexi). Phylotypes from some genera had protease expression patterns that could benefit plant N nutrition, for example, we identified a Janthinobacterium phylotype and two Burkholderiales that depolymerize organic N near young roots and a Rhizobacter with elevated protease levels near mature roots. These taxon-resolved gene expression results provide an ecological read-out of microbial interactions and controls on N dynamics in specific soil microhabitats and could be used to target potential plant N bioaugmentation strategies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Spatial co-transcriptomics reveals discrete stages of the arbuscular mycorrhizal symbiosis

Abstract The symbiotic interaction of plants with arbuscular mycorrhizal (AM) fungi is ancient and widespread. Plants provide AM fungi with carbon in exchange for nutrients and water, making this interaction a prime target for crop improvement. However, plant–fungal interactions are restricted to a small subset of root cells, precluding the application of most conventional functional genomic techniques to study the molecular bases of these interactions. Here we used single-nucleus and spatial RNA sequencing to explore both Medicago truncatula and Rhizophagus irregularis transcriptomes in AM symbiosis at cellular and spatial resolution. Integrated, spatially registered single-cell maps revealed infected and uninfected plant root cell types. We observed that cortex cells exhibit distinct transcriptome profiles during different stages of colonization by AM fungi, indicating dynamic interplay between both organisms during establishment of the cellular interface enabling successful symbiosis. Our study provides insight into a symbiotic relationship of major agricultural and environmental importance and demonstrates a paradigm combining single-cell and spatial transcriptomics for the analysis of complex organismal interactions.

59 BASIC BIOLOGICAL SCIENCES↗