Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “radial diffusion”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

Analysis of pedestal plasma transport

An H-mode edge pedestal plasma transport benchmarking exercise was undertaken for a single DIII-D pedestal. Transport modelling codes used include 1.5D interpretive (ONETWO, GTEDGE), 1.5D predictive (ASTRA) and 2D ones (SOLPS, UEDGE). The particular DIII-D discharge considered is 98889, which has a typical low density pedestal. Profiles for the edge plasma are obtained from Thomson and charge-exchange recombination data averaged over the last 20% of the average 33.53 ms repetition time between type I edge localized modes. The modelled density of recycled neutrals is largest in the divertor X-point region and causes the edge plasma source rate to vary by a factor similar to 10(2) on the separatrix. Modelled poloidal variations in the densities and temperatures on flux surfaces are small on all flux surfaces up to within about 2.6 mm (rho(N) > 0.99) of the mid-plane separatrix. For the assumed Fick's-diffusion-type laws, the radial heat and density fluxes vary poloidally by factors of 2-3 in the pedestal region; they are largest on the outboard mid-plane where flux surfaces are compressed and local radial gradients are largest. Convective heat flows are found to be small fractions of the electron (less than or similar to 10%) and ion (less than or similar to 25%) heat flows in this pedestal. Appropriately averaging the transport fluxes yields interpretive 1.5D effective diffusivities that are smallest near the mid-point of the pedestal. Their 'transport barrier' minima are about 0.3 (electron heat), 0.15 (ion heat) and 0.035 (density) m(2) s(-1). Electron heat transport is found to be best characterized by electron-temperature-gradient-induced transport at the pedestal top and paleoclassical transport throughout the pedestal. The effective ion heat diffusivity in the pedestal has a different profile from the neoclassical prediction and may be smaller than it. The very small effective density diffusivity may be the result of an inward pinch flow nearly balancing a diffusive outward radial density flux. The inward ion pinch velocity and density diffusion coefficient are determined by a new interpretive analysis technique that uses information from the force balance (momentum conservation) equations; the paleoclassical transport model provides a plausible explanation of these new results. Finally, the measurements and additional modelling needed to facilitate better pedestal plasma transport modelling are discussed.

ASDEX-UPGRADE↗

Application of radial-splitters for improved wide-angle diffuser performance in a blowdown tunnel

Severe flow separation in the 15:1 area-ratio, 38 deg total angle conical diffuser preceding the settling-chamber of an intermittent blowdown wind tunnel was eliminated by the use of a novel radial-splitter arrangement. As a consequence, the operating life of settling-chamber screens was greatly extended and test-section flow steadiness improved, with no penalty in the tunnel running time.

Rao, D. M.↗

Investigation of the interaction between competing types of nondiffusive transport in drift wave turbulence

Radial transport in turbulence dominated tokamak plasmas has been observed to deviate from classical diffusion in certain regimes relevant for magnetic confinement fusion. These situations at least include near-marginal turbulence, where radial transport becomes superdiffusive and mediated by elongated radial structures (or avalanches) and transport across radially sheared poloidal flows, where radial subdiffusion often ensues. In this paper, the interaction between very different physical ingredients responsible for these two types of nondiffusive dynamics (namely, turbulent profile relaxation close to a local threshold and the interaction with radially sheared zonal flows) is studied in detail in the context of a simple two-dimensional electrostatic plasma fluid turbulence model based on the dissipative trapped electron mode. It is shown that, depending on the relative relevance of each of these ingredients, which can be tuned in various ways, a variety of non-diffusive radial transport behaviors can be found in the system. The results also illustrate the fact that the classical diffusion paradigm is often insufficient to describe turbulent transport in systems with self-generated flows and turbulent profile relaxations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Performance of an asymmetric short annular diffuser with a nondiverging inner wall using suction

The performance of a short highly asymmetric annular diffuser equipped with wall bleed (suction) capability was evaluated at nominal inlet Mach numbers of 0.188, 0.264, and 0.324 with the inlet pressure and temperature at near ambient values. The diffuser had an area ratio of 2.75 and a length- to inlet-height ratio of 1.6. Results show that the radial profiles of diffuser exit velocity could be controlled from a severely hub peaked to a slightly tip biased form by selective use of bleed. At the same time, other performance parameters were also improved. These results indicate the possible application of the diffuser bleed technique to control flow profiles to gas turbine combustors.

Juhasz, A.↗

PROPAGATION OF SOLAR ENERGETIC PARTICLES IN THREE-DIMENSIONAL INTERPLANETARY MAGNETIC FIELDS: IN VIEW OF CHARACTERISTICS OF SOURCES

In this paper, a model of solar energetic particle (SEP) propagation in the three-dimensional Parker interplanetary magnetic field is calculated numerically. We study the effects of the different aspects of particle sources on the solar surface, which include the source location, coverage of latitude and longitude, and spatial distribution of source particle intensity, on propagation of SEPs with both parallel and perpendicular diffusion. We compute the particle flux and anisotropy profiles at different observation locations in the heliosphere. From our calculations, we find that the observation location relative to the latitudinal and longitudinal coverage of particle source has the strongest effects on particle flux and anisotropy profiles observed by a spacecraft. When a spacecraft is directly connected to the solar sources by the interplanetary magnetic field lines, the observed particle fluxes are larger than when the spacecraft is not directly connected. This paper focuses on the situations when a spacecraft is not connected to the particle sources on the solar surface. We find that when the magnetic footpoint of the spacecraft is farther away from the source, the observed particle flux is smaller and its onset and maximum intensity occur later. When the particle source covers a larger range of latitude and longitude, the observed particle flux is larger and appears earlier. There is east-west azimuthal asymmetry in SEP profiles even when the source distribution is east-west symmetric. However, the detail of particle spatial distribution inside the source does not affect the profile of the SEP flux very much. When the magnetic footpoint of the spacecraft is significantly far away from the particle source, the anisotropy of particles in the early stage of an SEP event points toward the Sun, which indicates that the first arriving particles come from outside of the observer through perpendicular diffusion at large radial distances.

79 ASTRONOMY AND ASTROPHYSICS↗

Influence of inhomogeneous magnetic field on the characteristics of very high frequency capacitively coupled plasmas

The effect of inhomogeneous magnetic field on the spatial structure of very high frequency (VHF) plasmas is investigated for different coil configurations, gas pressures, high frequency bias powers, and degrees of electronegativity. The simulation results show that the electron density peaks in the center of the chamber for VHF plasmas due to the standing electromagnetic wave effect. On application of a magnetic field, the density increases near the wafer edge and decreases at the chamber center. The radial magnetic field component is found to limit electron loss to the electrodes and locally enhance the electron density. The axial magnetic field component limits plasma diffusion in the radial direction helping preserve the effect of improved electron confinement by the radial magnetic field. The peak electron density decreases with increasing magnetic field as the plasma moves toward the electrode edge occupying a larger volume. The effect of magnetic field becomes weaker at higher pressure due to the increased electron-neutral collisions which reduce the effectiveness of electron confinement around the magnetic field lines. The impact of magnetic field on plasma profile is somewhat weaker in an electronegative Ar/CF{sub 4} plasma because of the presence of less mobile and unmagnetized negative ions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Investigation of core impurity transport in DIII-D diverted negative triangularity plasmas

Abstract Tokamak operation at negative triangularity has been shown to offer high energy confinement without the typical disadvantages of edge pedestals (Marinoni et al 2021 Nucl. Fusion 61 116010). In this paper, we examine impurity transport in DIII-D diverted negative triangularity experiments. Analysis of charge exchange recombination spectroscopy reveals flat or hollow carbon density profiles in the core, and impurity confinement times consistently shorter than energy confinement times. Bayesian inferences of impurity transport coefficients based on laser blow-off injections and forward modeling via the Aurora package (Sciortino et al 2021 Plasma Phys. Control. Fusion 63 112001) show core cross-field diffusion to be higher in L-mode than in H-mode. Impurity profile shapes remain flat or hollow in all cases. Inferred radial profiles of diffusion and convection are compared to neoclassical, quasilinear gyrofluid, and nonlinear gyrokinetic simulations. Heat transport is observed to be better captured by reduced turbulence models with respect to particle transport. State-of-the-art gyrokinetic modeling compares favorably with measurements across multiple transport channels. Overall, these results suggest that diverted negative triangularity discharges may offer a path to a highly-radiative L-mode scenario with high core performance.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Performance characteristics of two annular dump diffusers using suction-stabilized vortex flow control

Test results are described for two abrupt area change annular diffusers with provisions for maintaining suction stabilized toroidal vortices at the area discontinuity. Both diffusers had an overall area ratio of 4.0 with the prediffuser area ratio being 1.18 for diffuser A and 1.4 for diffuser B. Performance was evaluated at near atmospheric pressure and temperature for a range of inlet Mach numbers from 0.18 to 0.41 and suction rates from 0 to 18%. Static pressure recovery improved significantly as the suction rate was increased to approximately 11%. Results obtained with diffuser A were superior to that obtained with diffuser B. Flat radial profiles of exit velocity were not obtained since the flow showed preferential hub or tip attachment at moderate suction rates. At high suction rates the diffuser exit flow became circumferentially nonuniform and unstable.

Juhasz, A. J.↗

Post-irradiation Experiment on IG-110 and A3-3 Graphites for HTGR - 18494

The first irradiation test of A3-3 graphite matrix and IG-110 graphite were performed in Hanaro during the period of August 2013 through March 2014. The dimensional and weight changes, microstructure, and thermal diffusivity were investigated in different directions of the specimen after the irradiation. Interestingly, the density of the A3-3 matrix was increased by 9.4% due to the weight increase after the irradiation. Moreover, the thermal diffusivity in the radial direction of the A3-3 matrix is almost 3-times higher than that of the axial direction owing to the radially oriented graphite texture shown in the microstructure. Meanwhile, 10-20 {mu}m sized irradiation induced pores are observed in the microstructure of IG-110. The thermal diffusivity measurement of pre- and post-irradiated IG-110 results in a 68% irradiation-dominant decrease of thermal conductivity. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

GLOBAL MODELING OF NEBULAE WITH PARTICLE GROWTH, DRIFT, AND EVAPORATION FRONTS. I. METHODOLOGY AND TYPICAL RESULTS

We model particle growth in a turbulent, viscously evolving protoplanetary nebula, incorporating sticking, bouncing, fragmentation, and mass transfer at high speeds. We treat small particles using a moments method and large particles using a traditional histogram binning, including a probability distribution function of collisional velocities. The fragmentation strength of the particles depends on their composition (icy aggregates are stronger than silicate aggregates). The particle opacity, which controls the nebula thermal structure, evolves as particles grow and mass redistributes. While growing, particles drift radially due to nebula headwind drag. Particles of different compositions evaporate at “evaporation fronts” (EFs) where the midplane temperature exceeds their respective evaporation temperatures. We track the vapor and solid phases of each component, accounting for advection and radial and vertical diffusion. We present characteristic results in evolutions lasting 2 × 10{sup 5} years. In general, (1) mass is transferred from the outer to the inner nebula in significant amounts, creating radial concentrations of solids at EFs; (2) particle sizes are limited by a combination of fragmentation, bouncing, and drift; (3) “lucky” large particles never represent a significant amount of mass; and (4) restricted radial zones just outside each EF become compositionally enriched in the associated volatiles. We point out implications for millimeter to submillimeter SEDs and the inference of nebula mass, radial banding, the role of opacity on new mechanisms for generating turbulence, the enrichment of meteorites in heavy oxygen isotopes, variable and nonsolar redox conditions, the primary accretion of silicate and icy planetesimals, and the makeup of Jupiter’s core.

79 ASTRONOMY AND ASTROPHYSICS↗

Scale-free transport in fusion plasmas: theory and applications

A novel approach to detect the existence of scale-free transport in turbulent flows, based on the characterization of its Lagrangian characteristics, is presented and applied to two situations relevant for tokamak plasmas. The first one, radial transport in the presence of near-critical turbulence, has been known for quite some time to yield scale-free, superdiffusive transport. We use it to test the method and illustrate its robustness with respect to other approaches. The second situation, radial transport across radially-sheared poloidal zonal flows driven by turbulence via the Reynold stresses, is examined for the first time in this manner. The result is rather surprising and different from the traditionally assumed diffusive behavior. Instead, radial transport behaves instead in a scale-free, subdiffusive manner, which may have implications for the modeling of transport across transport barriers.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Pedestal main ion particle transport inference through gas puff modulation with experimental source measurements

Abstract Transport in the DIII-D high confinement mode (H-mode) pedestal is investigated through a periodic edge gas puff modulation (GPM) which perturbs the deuterium density and source profiles. By using absolutely calibrated experimental edge ionization profile measurements, radial profiles of diffusion ( D ) and convection ( v ) are calculated into the pedestal region without depending on modeling the edge ionization source. An analytic approach with closed-form expressions for the D and v profiles and a more advanced Bayesian approach show evidence of an inward particle convection on the order of 1 m s −1 extending to normalized poloidal flux ( Ψ N ) of 0.98. Meanwhile, diffusion reaches a minimum value of ( 0.03 ± 0.02 ) m 2 s −1 in the pedestal region. Notably, the Bayesian approach, which utilizes the Aurora 1.5 D forward model inside the IMPRAD OMFIT module, provides radially resolved transport profiles with associated uncertainty without requiring an explicit form for the perturbation to the density profile or source. The combination of experimental ionization measurements and Bayesian inference provides an enhanced robust framework for investigating edge particle transport coefficients to experimentally test transport physics in order to improve predictive capabilities in the tokamak edge.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

New mechanism of runaway electron diffusion due to microturbulence in tokamaks

Chaotic transport of runaway electrons in a toroidal system in the presence of a weak small-scale magnetic turbulent field with a wide mode spectrum is studied. Using a fast running mapping, the radial profiles of turbulent diffusion coefficients are calculated. It is found that at large Kubo numbers the chaotic transport of the electrons is described by a fractal-like radial dependence of the diffusion coefficients with reduced or zero values near low-order rational drift surfaces which form transport barriers. The latter can be one of the main reasons of the improved confinement of runaway electrons in tokamaks. One can expect that this effect may lead to the formation of the nested beams of runaway electrons.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Effect of diffuser bleed on performance of an annular swirl can combustor

A full-scale annular swirl can combustor equipped with diffuser bleed capability was tested at low fuel-air ratio, burning natural gas fuel. Test results show that, by drawing off a small amount of air on the inner or outer diffuser wall, the radial profile of combustor exit temperature could be changed from a strongly tip biased, to a strongly hub biased shape. Furthermore, combustor total pressure loss could be reduced by about one third by using a total bleed rate equal to 6 percent of diffuser inlet flow. At simulated engine idle conditions combustion efficiency was increased from 64 percent to nearly 100 percent by using 3 percent outer wall bleed. Combustor blowout performance was also improved significantly by using this diffuser bleed scheme.

Juhasz, A. J.↗