Results for “partial correlation” — Page 20

DOE OSTI2020

Understanding the Origin of Highly Selective CO 2 Electroreduction to CO on Ni,N‐doped Carbon Catalysts

Abstract Ni,N‐doped carbon catalysts have shown promising catalytic performance for CO 2 electroreduction (CO 2 R) to CO; this activity has often been attributed to the presence of nitrogen‐coordinated, single Ni atom active sites. However, experimentally confirming Ni−N bonding and correlating CO 2 reduction (CO 2 R) activity to these species has remained a fundamental challenge. We synthesized polyacrylonitrile‐derived Ni,N‐doped carbon electrocatalysts (Ni‐PACN) with a range of pyrolysis temperatures and Ni loadings and correlated their electrochemical activity with extensive physiochemical characterization to rigorously address the origin of activity in these materials. We found that the CO 2 R to CO partial current density increased with increased Ni content before plateauing at 2 wt % which suggests a dispersed Ni active site. These dispersed active sites were investigated by hard and soft X‐ray spectroscopy, which revealed that pyrrolic nitrogen ligands selectively bind Ni atoms in a distorted square‐planar geometry that strongly resembles the active sites of molecular metal–porphyrin catalysts.

Koshy, David M.↗

DOE OSTI2023

Size‐Dependent Dispersion of Rhodium Clusters into Isolated Single Atoms at Low Temperature and the Consequences for CO Oxidation Activity

Abstract Understanding the dynamic structural evolution of supported metal clusters under reaction conditions is crucial to develop structure reactivity relations. Here, we followed the structure of different size Rh clusters supported on Al 2 O 3 using in situ/operando spectroscopy and ex situ aberration‐corrected electron microscopy. We report a dynamic evolution of rhodium clusters into thermally stable isolated single atoms upon exposure to oxygen and during CO oxidation. Rh clusters partially disperse into single atoms at room temperature and the extent of dispersion increases as the Rh size decreases and as the reaction temperature increases. A strong correlation is found between the extent of dispersion and the CO oxidation kinetics. More importantly, dispersing Rh clusters into single atoms increases the activity at room temperature by more than two orders of magnitude due to the much lower activation energy on single atoms (40 vs. 130 kJ/mol). This work demonstrates that the structure and reactivity of small Rh clusters are very sensitive to the reaction environment.

Albrahim, Malik A.↗

DOE OSTI2023

Size‐Dependent Dispersion of Rhodium Clusters into Isolated Single Atoms at Low Temperature and the Consequences for CO Oxidation Activity

Abstract Understanding the dynamic structural evolution of supported metal clusters under reaction conditions is crucial to develop structure reactivity relations. Here, we followed the structure of different size Rh clusters supported on Al 2 O 3 using in situ/operando spectroscopy and ex situ aberration‐corrected electron microscopy. We report a dynamic evolution of rhodium clusters into thermally stable isolated single atoms upon exposure to oxygen and during CO oxidation. Rh clusters partially disperse into single atoms at room temperature and the extent of dispersion increases as the Rh size decreases and as the reaction temperature increases. A strong correlation is found between the extent of dispersion and the CO oxidation kinetics. More importantly, dispersing Rh clusters into single atoms increases the activity at room temperature by more than two orders of magnitude due to the much lower activation energy on single atoms (40 vs. 130 kJ/mol). This work demonstrates that the structure and reactivity of small Rh clusters are very sensitive to the reaction environment.

Albrahim, Malik A.↗

DOE OSTI2023

NMR relaxometry characterization of water adsorption in corn stover anatomical fractions

Nuclear magnetic resonance (NMR) relaxometry is applied to provide direct measurement of water adsorption in anatomical fractions of corn stover. NMR transverse T 2 relaxation time distribution measurements indicate multiple water populations, which vary with anatomical fraction and water adsorption. Measured T 2 data are used to calculate thermodynamic properties of Brunauer-Emmet-Teller adsorption theory using a model to estimate mono and bilayer relaxation. T 2 data are used directly to determine rotational diffusion correlation times indicating adsorption interaction strength. T 1 -T 2 longitudinal-transverse relaxation time correlation measurements quantify differences in the molecular level structural order of the adsorbate surface water as a function of water activity, i.e. relative humidity or water vapor partial pressure. The T 1 /T 2 ratio provides a measure of the surface energy related to the adsorption strength and surface diffusive mobility of the water adsorbate and differentiates the anatomical fractions. Furthermore, the results indicate that direct measurement of NMR relaxation times can be used to characterize corn stover biomass water adsorption, data relevant to processing and handling considerations.

09 BIOMASS FUELS↗

DOE OSTI2021

Type-I ELM mitigation by continuous lithium granule gravitational injection into the upper tungsten divertor in EAST

Large edge-localized modes (ELMs) were mitigated by gravitational injection of lithium granules into the upper X-point region of the experimental advanced superconducting tokamak (EAST) device with tungsten plasma-facing components. The maximum ELM size was reduced by ~70% in high β N H-mode plasmas. Large ELM stabilization was sustained for up to about 40 energy confinement times, with constant core radiated power and no evidence of high-Z or low-Z impurity accumulation. The lithium granules injection reduced the edge plasma pedestal density and temperature and their gradients, due to increased edge radiation and reduced recycling from the plasma-facing components. Ideal stability calculations using the ELITE code indicate that the stabilization of large ELMs correlates with improved stability of intermediate-n peeling-ballooning modes, due to reduced edge current resulting from the profile changes. The pedestal pressure reduction was partially offset by a core density increase, which resulted in a modest ~7% drop in core stored energy and normalized energy confinement time. We surmise that the remnant small ELMs are triggered by the penetration of multiple Li granules just past the separatrix, similar to small ELMs triggered by deuterium pellet Futatani et al (2014 Nucl. Fusion 54 073008). This study extends previous ELM elimination with Li powder injection Maingi et al (2018 Nucl. Fusion 58 024003) in EAST because (1) use of small, dust-like powder and the related potential health hazards were eliminated, and (2) use of macroscopic granules should be more applicable to future devices, due to deeper penetration than dust particles, e.g. inside the separatrix with velocities ~10 m s -1 in EAST.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2021

Type-I ELM mitigation by continuous lithium granule gravitational injection into the upper tungsten divertor in EAST

Large edge-localized modes (ELMs) were mitigated by gravitational injection of lithium granules into the upper X-point region of the EAST device with tungsten plasma-facing components. The maximum ELM size was reduced by ~ 70% in high βN H-mode plasmas. Large ELM stabilization was sustained for up to about 40 energy confinement times, with constant core radiated power and no evidence of high-Z or low-Z impurity accumulation. The lithium granules injection reduced the edge plasma pedestal density and temperature and their gradients, due to increased edge radiation and reduced recycling from the plasma-facing components. Ideal stability calculations using the ELITE code indicate that the stabilization of large ELMs correlates with improved stability of intermediate-n peeling-ballooning modes, due to reduced edge current resulting from the profile changes. The pedestal pressure reduction was partially offset by a core density increase, which resulted in a modest ~ 7% drop in core stored energy and normalized energy confinement time. We surmise that the remnant small ELMs are triggered by the penetration of multiple Li granules just past the separatrix, similar to small ELMs triggered by deuterium pellet [S. Futatani et al., Nucl. Fusion 54 (2014) 073008]. This study extends previous ELM elimination with Li powder injection [R. Maingi et al., Nucl. Fusion 58 (2018) 024003] in EAST because 1) use of small, dust-like powder and the related potential health hazards were eliminated, and 2) use of macroscopic granules should be more applicable to future devices, due to deeper penetration than dust particles, e.g. inside the separatrix with velocities ~ 10 m/s in EAST.

EAST↗

NASA NTRS1986

Further evidence for lightning on Venus

Impulsive electrical signals at all frequencies recorded by the plasma wave instrument on Pioneer Venus are found to cluster around periapsis. The signals are strongest at 100 Hz and have a secondary peak at 5.4 kHz. These characteristics are consistent with generation by lightning in the Venus atmosphere and the direct propagation of whistler mode signals below the electron gyro frequency and the partial transmission of electromagnetic waves in the presence of electron density inhomogeneities above the electron gyro frequency. The scattering by electron density inhomogeneities may also weaken any correlation with surface topographical features. Thus, the source of these signals may either be intercloud lightning at high altitudes or lightning in volcanic plumes near the ground, despite the large scatter in inferred source locations.

Singh, R. N.↗

NASA NTRS1990

A three-dimensional approach for analysis of sidewall injector mixing and combustion

A three-dimensional (3-D) analytical approach to calculate the mixing and combustion efficiency along engine combustors that use sidewall fuel injectors is described. The analysis consists of three parts: (1) an empirical correlation for fuel penetration, (2) application of integral conservation laws following jet turning and pressure equilibration, and (3) an analytical solution for the simplified three-dimensional partial differential equations to describe the downstream mixing and combustion process. Numerical results are compared to some empirical and experimental work, and favorable agreements are shown. The importance of including anisotropic turbulence and three-dimensional effects are illustrated by comparison with data and other less comprehensive analyses. The analytical solution is suitable for rapid estimates of engine performance and parametric studies of combustor designs containing transverse or angled injector ports arranged in rows and/or columns.

Quan, Victor↗

NASA NTRS1986

Spatial and temporal variability of infrared-observable properties of the Jovian atmosphere: A partial survey

Examination of infrared characteristics of the Jovian atmosphere are made using Voyager IRIS mapping from 1979, groud based scanning from 1979-1983, and ground based mapping from 1983 to the present. In general, there is a strong correlation between tropospheric thermal properties and the visual cloud albedo for all observations. The Voyager IRIS maps show no strong evidence for day/night differences. Temperature differences diminish with depth in the troposphere. Temporal changes over several weeks indicate a high correlation between thermal and visual properties, although no changes in the distribution of para H2 and ortho H2 are seen. Stratospheric banded organization is different from the troposphere, and there is a temperature enhancement near the north magnetic pole. The spatial distributions of ammonia gas and ammonia ice absorption are different. Stratospheric temperatures exhibit seasonal hemispheric asymmetry. Other temperature changes at and below the 150-mb level correlate with changes in the Jovian visual structure. The stratospheric temperature field is uncorrelated with visual features or temperatures below the 150-mb level. Elevated temperatures are observed near both north and south magnetic pole positions. Both the meridional positions and the relative intensities of stratospheric banded organization change significantly, especially after 1982. Ground based mapping confirms a correlation between temperatures and various measures of cloud distribution. Complex and unexpected characteristics are observed in the stratospheric temperature field; these include dramatic temporal changes on short time scales.

Orton, Glenn S.↗

DOE OSTI2020

Effects of microstructure on the oxidation behavior of A3 matrix‐grade graphite

Abstract The oxidation behavior of matrix‐grade graphite in air‐ or steam‐ingress accident scenarios is of great interest for high‐temperature gas reactors (HTGRs). In this study, the microstructures of two variants of matrix‐grade graphite based on the German A3‐3 and A3‐27 formulations were characterized with scanning electron microscopy (SEM), transmission electron microscopy (TEM), and Raman spectroscopy, and correlated to oxidation behavior observed through thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). Through TEM imaging and selected area electron diffraction (SAED), a higher volume fraction of partially graphitized carbon was identified in the A3‐3 type graphite than in the A3‐27 type. This structure is believed to have contributed to the accelerated oxidation exhibited by A3‐3 in the chemical reaction‐controlled oxidation regime.

Bratten, Adam↗

NASA NTRS1972

Lunar topography - First radar-interferometer measurements of the Alphonsus-Ptolemaeus-Arzachel region.

Radar interferometry is a new technique for accurately measuring the topography of the lunar surface from the earth. Measurements have been made with this technique of an area including the craters Ptolemaeus, Alphonsus, and Arzachel and a portion of Mare Nubium. There is evidence for a late episode of volcanism that partially filled two of the craters through a crustal fault of Imbrian origin. Several other features of the topography, particularly those coinciding with local gravitational anomalies, can be correlated with flow events.

Zisk, S. H.↗

NASA NTRS1976

Variations including possible solar cycle variations of stratospheric ozone over central Switzerland

The annual variation of the total amount of ozone over central Switzerland and the partial pressures in each of 7 layers from the surface to 7.8 m zeta shows the pattern representative of mid-latitude ozone: summer maximum in the troposphere, spring maximum in the lower stratosphere up to 30 mb and summer maximum in the middle stratosphere up to approx. mb. It was also shown that at the level of the ozone maximum the ozone partial pressure has a pronounced period of about 26 months. Total ozone and the ozone concentration in the different layers have marginally significant (at plus or minus sigma) correlations with relative sunspot number. The time lag for these correlations is long in the troposphere (about 36 months) but decreases with height to the level of ozone maximum (to about 2 months). A similar analysis of the data derived from the ozonesonde program at Hohenpeissenberg, Germany (GFR) gave completely consistent results with those discussed above.

London, J.↗

NASA NTRS2018

Lightweight, Durable, and Multifunctional Electrical Insulation Material Systems for High Voltage Applications

Newly developed multilayer structures of well-known polymer insulation materials significantly improved dielectric breakdown voltage, VB, or dielectric strength, K, if well-bonded, when compared to those of single material insulations or the commercial SOA systems, such as Teflon-Kapton-Teflon (TKT), at the same overall thickness. To date, the greatest improvement of the new structures from a few candidate materials, including various types of Kapton PIs and PFA or PET as bond layer (BL), was about 61% higher than that of the Kapton PI alone films, 40.1 vs. 24.9 kV, which was translated to 86.3% decrease in insulation thickness, thus significant volume and weight reduction of the final system. However, it was of interest to note that most improvements of the multilayer structures occurred at thicker overall thicknesses, above ~ 0.15 mm. Extensive analyses also showed that K of the multilayer structures increased with (i) decreasing individual layer thickness regardless of material type, (ii) increasing total accumulated thickness of PI or overall PI/BL ratio, and (iii) increasing number of interface or total number of layers, but only above the aforementioned overall thickness limit. Increases in VB of the multilayer structures were directly correlated with damage evolution and failure mode. With further material-design-process optimizations of the multilayer structures, it was expected to achieve other multifunctionalities, such as high partial discharge (PD) resistance, improved durability, EMI shielding, and high thermal dissipation in addition to high dielectric strength. These new structures can be used in various high voltage and high temperature applications, such as future hybrid or all electric aircraft wiring and power transmission as well as many other non-aerospace high power cables, electronic parts and components, printed circuit board, and so forth. The multilayer insulation system can be easily processed and manufactured with various conductor types via calendaring, compression-molding, stamping, laminating, vacuum-bagging and autoclaving, or 3D printing, even for complex 3-D components. Based on their unique structural configurations and potential capabilities, the new insulation system was identified as micro-multilayer multifunctional electrical insulation (MMEI). Patent application of the MMEI concept and current design configurations was filed for a 1-year provisional application (OAI-58834, Serial No.: 62/659,234), pending conversion to a U.S. utility application. This paper presents details of the MMEI structures, their dielectric performance analyses, potential mechanisms, and commercial scaleup feasibility assessment.

Electric aircrafts↗

NASA NTRS2018

Lightweight, Durable, and Multifunctional Electrical Insulation Material Systems for High Voltage Applications

Newly developed multilayer structures of well-known polymer insulation materials significantly improved dielectric breakdown voltage, VB, or dielectric strength, K, if well-bonded, when compared to those of single material insulations or the commercial SOA systems, such as Teflon-Kapton-Teflon (TKT), at the same overall thickness. To date, the greatest improvement of the new structures from a few candidate materials, including various types of Kapton PIs and PFA or PET as bond layer (BL), was about 61% higher than that of the Kapton PI alone films, 40.1 vs. 24.9 kV, which was translated to 86.3% decrease in insulation thickness, thus significant volume and weight reduction of the final system. However, it was of interest to note that most improvements of the multilayer structures occurred at thicker overall thicknesses, above ~ 0.15 mm. Extensive analyses also showed that K of the multilayer structures increased with (i) decreasing individual layer thickness regardless of material type, (ii) increasing total accumulated thickness of PI or overall PI/BL ratio, and (iii) increasing number of interface or total number of layers, but only above the aforementioned overall thickness limit. Increases in VB of the multilayer structures were directly correlated with damage evolution and failure mode. With further material-design-process optimizations of the multilayer structures, it was expected to achieve other multifunctionalities, such as high partial discharge (PD) resistance, improved durability, EMI shielding, and high thermal dissipation in addition to high dielectric strength. These new structures can be used in various high voltage and high temperature applications, such as future hybrid or all electric aircraft wiring and power transmission as well as many other non-aerospace high power cables, electronic parts and components, printed circuit board, and so forth. The multilayer insulation system can be easily processed and manufactured with various conductor types via calendaring, compression-molding, stamping, laminating, vacuum-bagging and autoclaving, or 3D printing, even for complex 3-D components. Based on their unique structural configurations and potential capabilities, the new insulation system was identified as micro-multilayer multifunctional electrical insulation (MMEI). Patent application of the MMEI concept and current design configurations was filed for a 1-year provisional application (OAI-58834, Serial No.: 62/659,234), pending conversion to a U.S. utility application. This paper presents details of the MMEI structures, their dielectric performance analyses, potential mechanisms, and commercial scaleup feasibility assessment.

Multifunctional↗

DOE OSTI2022

Mutations of Omicron Variant at the Interface of the Receptor Domain Motif and Human Angiotensin-Converting Enzyme-2

The most recent Omicron variant of SARS-CoV-2 has caused global concern and anxiety. The only thing certain about this strain, with a large number of mutations in the spike protein, is that it spreads quickly, seems to evade immune defense, and mitigates the benefits of existing vaccines. Based on the ultra-large-scale ab initio computational modeling of the receptor binding motif (RBM) and the human angiotensin-converting enzyme-2 (ACE2) interface, we provide the details of the effect of Omicron mutations at the fundamental atomic scale level. In-depth analysis anchored in the novel concept of amino acid-amino acid bond pair units (AABPU) indicates that mutations in the Omicron variant are connected with (i) significant changes in the shape and structure of AABPU components, together with (ii) significant increase in the positive partial charge, which facilitates the interaction with ACE2. We have identified changes in bonding due to mutations in the RBM. The calculated bond order, based on AABPU, reveals that the Omicron mutations increase the binding strength of RBM to ACE2. Our findings correlate with and are instrumental to explain the current observations and can contribute to the prediction of next potential new variant of concern.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

Oxidation rates and redox stabilization of ferrous iron in trioctahedral smectites

Iron(II)-bearing trioctahedral smectites (saponites) form during anoxic alteration of basaltic rock. They are predicted to have been widespread on the early Earth and are observed in the oceanic subsurface today. Smectite structures, including the occupancy of sites in the octahedral sheet, affect iron redox behavior but the rates and products of trioctahedral smectite oxidation have been largely unexplored to date. In this study we synthesized two Fe(II)-bearing trioctahedral smectites, one moderate (22 wt% Fe) and one high (27 wt% Fe) in iron content. We then examined the rate, extent, and products of their oxidation by dissolved oxygen, nitrite, and hydrogen peroxide. Dissolved oxygen caused partial oxidation of Fe(II) in the smectites with 14 to 43% of Fe(II) unoxidized after 20 to 30 days of exposure. The rate and extent of oxidation correlated with the dissolved oxygen concentration and the Fe(II) content of the clay. The incomplete oxidation in these experiments is consistent with the mixed-valent trioctahedral smectites observed in oxidized natural samples but contrasts with the complete reoxidation by oxygen shown by chemically- or microbially-reduced dioctahedral smectites. Oxidation of structural Fe(II) by 5 mmol L -1 nitrite was negligible for the moderate-iron smectite and yielded only ~17% oxidation after 54 days of reaction for the high-iron smectite. Hydrogen peroxide caused rapid and near-complete oxidation of both clays. Powder X-ray diffraction, variable-temperature Mössbauer spectroscopy, and extended X-ray absorption fine structure spectroscopy together detected no crystalline or short-range-ordered secondary phases and show that oxidized iron remained in the trioctahedral smectite structure. The recalcitrant Fe(II) pool in oxidized trioctahedral smectites exists in less distorted sites than Fe(II) in the initial clays. Its unreactive nature at prolonged reaction times indicates an elevated redox potential generated by the local coordination environment. Slower oxidation rates create a larger recalcitrant Fe(II) pool, suggesting kinetic competition between oxidation and a process involved in redox stabilization, such as electron exchange between octahedral iron sites or deprotonation of hydroxyl groups in the structure. The resistance to complete oxidation of trioctahedral ferrous smectites and their full retention of iron demonstrates that transitions from anoxic to oxic conditions generate mixed-valence smectites rather than a mixture of new phases. Identifying the diagenetic products of mixed-valent trioctahedral smectites may provide an indicator in the rock record of past redox cycling. In conclusion, substantial portions of structural Fe(II) in trioctahedral smectites display slow abiotic oxidation kinetics and represent potential electron donors for both microaerophilic iron oxidizing and nitrate-reducing, iron-oxidizing microorganisms in altered mafic rocks and related settings.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Corrugation-driven symmetry breaking in magic-angle twisted bilayer graphene

Abstract The discovery of unconventional superconductivity in magic-angle twisted bilayer graphene (tBLG) supported the twist-angle-induced flat band structure predictions made a decade earlier. Numerous physical properties have since been linked to the interlayer twist angle using the flat band prediction as a guideline. However, some key observations like the nematic phase and striped charge order behind the superconductivity are missing in this initial model. Here we show that a thermodynamically stable large out-of-plane displacement, or corrugation of the bilayer, induced by the interlayer twist, demonstrates partially filled states of the flat band structure, accompanied by a broken symmetry, in the magic-angle regime and the presence of symmetry breaking associated with the superconductivity in tBLG. The distinction between low and high corrugation can also explain the observed evolution of the vibrational spectra of tBLG as a function of twist angle. Our observation that large out-of-plane deformation modes enable partial filling of states near the Fermi energy may lead to a strategy for offsetting the effects of disorder in the local twist angle, which suppresses unconventional superconductivity and correlated insulator behavior in magic-angle tBLG.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2020

The Detection of Monoclinic Zirconia and Non-Uniform 3D Crystallographic Strain in a Re-Oxidized Ni-YSZ Solid Oxide Fuel Cell Anode

The solid oxide fuel cell (SOFC) anode is often composed of nickel (Ni) and yttria-stabilized zirconia (YSZ). The yttria is added in small quantities (e.g., 8 mol %) to maintain the crystallographic structure throughout the operating temperatures (e.g., room-temperature to >800 °C). The YSZ skeleton provides a constraining structural support that inhibits degradation mechanisms such as Ni agglomeration and thermal expansion miss-match between the anode and electrolyte layers. Within this structure, the Ni is deposited in the oxide form and then reduced during start-up; however, exposure to oxygen (e.g., during gasket failure) readily re-oxidizes the Ni back to NiO, impeding electrochemical performance and introducing complex structural stresses. In this work, we correlate lab-based X-ray computed tomography using zone plate focusing optics, with X-ray synchrotron diffraction computed tomography to explore the crystal structure of a partially re-oxidized Ni/NiO-YSZ electrode. These state-of-the-art techniques expose several novel findings: non-isotropic YSZ lattice distributions; the presence of monoclinic zirconia around the oxidation boundary; and metallic strain complications in the presence of variable yttria content. This work provides evidence that the reduction–oxidation processes may destabilize the YSZ structure, producing monoclinic zirconia and microscopic YSZ strain, which has implications upon the electrode’s mechanical integrity and thus lifetime of the SOFC.

25 ENERGY STORAGE↗