Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “orientational order”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

A three-dimensional, compressible, laminar boundary-layer method for general fuselages. Volume 1: Numerical method

A procedure for calculating 3-D, compressible laminar boundary layer flow on general fuselage shapes is described. The boundary layer solutions can be obtained in either nonorthogonal 'body oriented' coordinates or orthogonal streamline coordinates. The numerical procedure is 'second order' accurate, efficient and independent of the cross flow velocity direction. Numerical results are presented for several test cases, including a sharp cone, an ellipsoid of revolution, and a general aircraft fuselage at angle of attack. Comparisons are made between numerical results obtained using nonorthogonal curvilinear 'body oriented' coordinates and streamline coordinates.

Wie, Yong-Sun↗
NASA NTRS2014

NASA Engineering and Safety Center Technical Bulletin No. 14-02: Aerodynamic Reaction Control System (RCS) Orientation and Jet Interaction (JI) Model Validation

Careful consideration should be given to placement and orientation of RCS jet thrusters on hypersonic entry vehicles in order to minimize adverse RCS JI. Modern state-of-the-art computational fluid dynamics (CFD) tools should be able to predict the RCS effectiveness and JI accurately when coupled with verification and validation studies, including the use of appropriately designed experimental wind tunnel testing.

Aerodynamic Reaction Control System↗
NASA NTRS1988

Radiation field from an in-cloud lightning process with arbitrary orientation

The expression for the radiation electric field from a current pulse propagating along a channel of arbitrary orientation is derived. Representative radiation fields indicate that approximately 1-msec duration pulses occur at rates of up to 1/msec in intracloud flashes, thereby furnishing a valuable tool for the tracking of streamer development. Attention is given to the errors which arise when radiation pulse measurements are inverted, in order to determine the pulse's current-waveshape, channel-orientation, and current-speed product properties.

Thomson, E. M.↗
DOE OSTI2020

Conjugated Polymer Controlled Morphology and Charge Transport of Small-Molecule Organic Semiconductors

In this study, we report an efective approach to tune the crystallization, microstructure and charge transport of solution-processed organic semiconductors by blending with a conjugated polymer additive poly(3-hexylthiophene) (P3HT). When 6,13-bis(triisopropylsilylethynyl) pentacene (TIPS pentacene) was used as a model semiconductor material to mix with diferent amount of P3HT, their intermolecular interactions led to distinctive TIPS pentacene flm morphologies, including randomly-oriented crystal ribbons, elongated needles with enhanced long-range order, and grasslike curved microwires with interlinkages. Each type of morphology was found to further correlate to considerably diferent charge transport and device performance. As compared to pristine TIPS pentacene devices, bottom-gate, top-contact OTFTs with 2% in weight P3HT additive showed a 2-fold and 5-fold improvement of average feld-efect mobility and performance consistency (defned as the ratio of average mobility to the standard deviation), respectively. The improvement in transistor electrical performance can be attributed to the combined efect of enhanced crystal orientation and uniformity, as well as increased areal coverage. This work can be applied beyond the particular example demonstrated in this study and to tune the charge transport of other small-molecule organic semiconductors in general.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2024

Self‐Standing Chiral Covalent Organic Framework Thin Films with Full‐Color Tunable Guest‐Induced Circularly Polarized Luminescence

Abstract Exploring self‐standing chiral covalent organic framework (COF) thin films with controllable circularly polarized luminescence (CPL) is of paramount significance but remains a challenging task. Herein, we demonstrate the first example of self‐standing chiral COF films employing a polymerization‐dispersion‐filtration strategy. Pristine, low‐quality chiral COF films were produced by interfacial polymerization and then re‐dispersed into COF colloidal solutions. Via vacuum assisted assembly, these COF colloids were densely stacked and assembled into self‐standing, pure chiral COF films ( L‐ / D‐ CCOF‐F) that were transparent, smooth, crack‐free and highly crystalline. These films were tunable in thicknesses, areas, and roughness, along with strong diffuse reflectance circular dichroism (DRCD) and cyan CPL signals, showing an intrinsic luminescence asymmetric factor ( g lum ) of ~4.3×10 −3 . Furthermore, these COF films served as host adsorbents to load various achiral organic dye guests through adsorption. The effective chiral transfer and energy transfer between CCOF‐F and achiral fluorescent dyes endowed the dyes with strong chirality and tunable DRCD, resulting in intense, full‐color‐tunable solid‐state CPL. Notably, the ordered arrangement of dye guest molecules within the preferentially oriented chiral pores of CCOF‐F contributed to an amplified | g lum | factor of up to 7.2×10 −2 , which is state‐of‐the‐art for COF‐based CPL materials. This work provides new insights into the design and fabrication of self‐standing chiral COF films, demonstrating their great potential for chiroptical applications.

Tang, Xihao↗
DOE OSTI2021

Structurally Driven Environmental Degradation of Friction in MoS2 Films

Abstract We report an investigation of the friction mechanisms of MoS 2 thin films under changing environments and contact conditions using a variety of computational and experimental techniques. Molecular dynamics simulations were used to study the effects of water and molecular oxygen on friction and bonding of MoS 2 lamellae during initial sliding. Characterization via photoelectron emission microscopy (PEEM) and Kelvin probe force microscopy (KPFM) were used to determine work function changes in shear modified material within the top few nanometers of MoS 2 wear scars. The work function was shown to change with contact conditions and environment, and shown by density functional theory (DFT) calculations and literature reports to be correlated with lamellae size and thickness of the basally oriented surface layer. Results from nanoscale simulations and macroscale experiments suggest that the evolution of the friction behavior of MoS 2 is linked primarily to the formation or inhibition of a basally oriented, molecularly thin surface film with long-range order.

Curry, John F.↗
DOE OSTI2026

Anisotropic Ferromagnetism in CrAu 3 Sb 6

The crystal structure and properties of CrAu 3 Sb 6 are presented, determined by measurements on single crystal and polycrystalline samples and first-principles calculations. The trigonal structure (space group P$\overline{3}$1m) comprises a CdI 2 -like sublattice of AuSb 2 with Cr occupying octahedral holes in a fully ordered triangular array. It can be viewed as a variation of the interesting and well-known families of partially intercalated transition metal dichalcogenides, but with stronger interactions along the stacking direction evidenced by short Cr–Au distances. The compound is metallic and ferromagnetic with a Curie temperature of 164 K. A strong anomalous contribution to the Hall effect is seen in the ferromagnetic state, and quantum oscillations are observed in magnetization at 2 K. Magnetization measurements show that the ordered moments of 1.5 μ B per Cr are oriented along the c-axis with relatively strong magnetocrystalline anisotropy. Electronic structure calculations confirm this uniaxial anisotropy and the important role of spin–orbit coupling in CrAu 3 Sb 6 and reveal strongly favored ferromagnetic ground state consistent with the measured Curie temperature. Through combined experiment and theory, this work provides a detailed picture of the basic properties and behaviors of this uniquely structured, Cr-based, anisotropic ferromagnet.

Crystal structure↗
DOE OSTI2026

Nanoionics Drastically Accelerating Mass Transfer at Elevated Temperatures over 750 °C

Nanoionics were previously considered thermally unstable and infeasible for devices operating above 500 °C. Here, we elucidate the design principle for establishing stable nanoionics from various oxides. We utilized reversible solid oxide cells (SOCs) as the test bed and implemented nanoionics using atomic layer deposition (ALD). We demonstrate a straightforward, interface-controlled, practical approach to render a conformal, ∼15 nm thick ALD film, which initially thermodynamically favors the formation of a solid solution with the substrate into surface nanoionics with single or double layers of nanograins with random crystal orientations. The nanoionics exhibited conductivity estimated to be 7 orders of magnitude higher than that of their bulk-scale counterpart. They demonstrated conformability with uniform grain sizes of ∼15 nm, even after electrochemical operation for ∼500 h at 750 °C and 1000 h at 850 °C. The thermal stability and conductivity of such nanoionics represent a conceptual and technological framework in nanoionics.

atomic layer deposition↗
DOE OSTI2025

Aligning the Induced Anisotropy of Isotropic Nanoparticles with Liquid Crystals

Thermotropic liquid crystals (LCs) present opportunities for synergistic interactions with ligand-functionalized nanoparticles (NPs). Understanding the dynamics and structures of ligand-coated NPs in an anisotropic LC environment allows for better design and control of versatile LC-NP hybrid materials. Here, simulations and experiments yield direct evidence that cyanobiphenyl LCs induce anisotropy in the biphenylalkyl ligand shells of spherical NPs. The ellipsoidal NP aligns with the LC director. Magnetic fields can dictate the directional ordering of mesogens and consequently allow control of the orientation of the nonmagnetic NPs. Further, controlling the alignment and deformation advances the design and engineering of these hybrid nanomaterials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Revisiting the Anisotropic Complex Refractive Indices of Sodium Nitrate for Interpretation of the Reflectance Spectrum of Pressed Pellets

Reflectance spectroscopy is notoriously confounding in that the measured spectral response is highly dependent upon the morphology of the sample. Fortunately, all such perturbations are neatly encoded by the complex refractive index of the sample. Herein, we seek to quantitatively model the measured infrared reflectance spectrum of a specularly flat pressed pellet sample of the birefringent compound, sodium nitrate. Single crystals of sodium nitrate were synthesized via a slow evaporation process and spectroscopically analyzed using polarization-dependent infrared single-angle reflectance spectroscopy. The anisotropic complex refractive index was measured from 7500 to 300 cm-1 (1.33 to 33.33 µm). The deduced anisotropic optical constants were found to be consistent with those previously reported. Once measured and validated, the optical constants were applied to model the pressed pellet reflectance spectrum. It was evident that an average of the anisotropic refractive indices was insufficient to account for the measured pellet reflectance. In order to account for contributions of all possible microcrystalline orientations within the pellet, the Python package PYELLI was used to calculate a basis set of orientation-dependent reflection spectra spanning the distinct ? and ? Euler rotations of the uniaxial crystal. When the population of orientations was allowed to vary freely in a spectral fit analysis, the fit-deduced orientations were tightly clustered along f = 45º, hinting at residual anisotropy in the pressed pellet sample. Conversely, an equally valid spectral fit (with marginally worse fit metric) was obtained when the population was constrained to an isotropic distribution of orientations. Subsequent non-zero cross-polarization reflectance measurements likewise suggested anisotropy in the pellet. However, both grazing incidence wide-angle x-ray scattering and scanning electron microscopy measurements revealed that the microcrystal orientations at the surface of the pressed pellet sample were isotropically distributed (and that the average crystallite size was larger than ?/10). Application of the measured complex refractive indices for modeling the reflectance spectrum of the pressed pellet, and rectification of these seemingly contradictory observations will be discussed.

Wilhelm, Michael J.↗
DOE OSTI2021

Communication—Impact Behaviors of Pouch and Prismatic Battery Modules

The responses of pouch and prismatic battery modules when they are impacted by two types of indenters from three different directions are investigated experimentally. The test results show that the failure mechanism, peak force and penetration that leads to short-circuit in modules strongly depend on the impact direction, indenter shape, cell form factor and module design. It sheds lights on the abuse tolerance of batteries in different scenarios and demonstrates that the cell type, orientation and module structure should be considered simultaneously in order to improve the battery safety in electrical vehicles.

Electrochemistry↗
NASA NTRS1975

STOL aircraft transient ground effects. Part 1: Fundamental analytical study

The first phases of a fundamental analytical study of STOL ground effects were presented. Ground effects were studied in two dimensions to establish the importance of nonlinear effects, to examine transient aspects of ascent and descent near the ground, and to study the modelling of the jet impingement on the ground. Powered lift system effects were treated using the jet-flap analogy. The status of a three-dimensional jet-wing ground effect method was presented. It was shown, for two-dimensional unblown airfoils, that the transient effects are small and are primarily due to airfoil/freestream/ground orientation rather than to unsteady effects. The three-dimensional study showed phenomena similar to the two-dimensional results. For unblown wings, the wing/freestream/ground orientation effects were shown to be of the same order of magnitude as for unblown airfoils. This may be used to study the nonplanar, nonlinear, jet-wing ground effect.

Goldhammer, M. I.↗
NASA NTRS1980

Control of a large flexible platform in orbit

The dynamics and attitude and shape control of a large thin flexible platform in orbit are studied. Attitude and shape control is assumed to result from actuators placed perpendicular to the main surface and one edge and their effect on the rigid body and elastic modes is modelled to first order. The equations of motion are linearized about nominal orientations where the undeformed plate follows either the local vertical or local horizontal. The stability of the uncontrolled system is investigated analytically. Once controllability is established for a set of actuator locations, control law development is based on pole placement, decoupling, and linear optimal control theory.

Reddy, A. S. S. R.↗
NASA NTRS1987

Fracture mechanics concepts in reliability analysis of monolithic ceramics

Basic design concepts for high-performance, monolithic ceramic structural components are addressed. The design of brittle ceramics differs from that of ductile metals because of the inability of ceramic materials to redistribute high local stresses caused by inherent flaws. Random flaw size and orientation requires that a probabilistic analysis be performed in order to determine component reliability. The current trend in probabilistic analysis is to combine linear elastic fracture mechanics concepts with the two parameter Weibull distribution function to predict component reliability under multiaxial stress states. Nondestructive evaluation supports this analytical effort by supplying data during verification testing. It can also help to determine statistical parameters which describe the material strength variation, in particular the material threshold strength (the third Weibull parameter), which in the past was often taken as zero for simplicity.

Manderscheid, Jane M.↗
NASA NTRS1989

Diphenylpolyynes For Nonlinear Optical Devices

Several diphenylpolyyne compounds found to exhibit second-order nonlinear electric susceptibilities and chemical structures conducive to orientation in appropriate chemical environments. These features make new materials suitable for use in optical devices. Diphenylacetylene links give molecules rodlike characteristics making them amenable to orientation by suspension in liquid crystals. New molecules also have inherent liquid-crystalline properties enabling them to be oriented directly.

Stiegman, Albert E.↗
NASA NTRS1989

Automated model formulation for time-varying flexible structures

Presented here is an identification technique that uses the sensor information to choose a new model out of a finite set of discrete model space, in order to follow the observed changes to the given time varying flexible structure. Boundary condition sets or other information on model variations are used to organize the set of possible models laterally into a search tree with levels of abstraction used to order the models vertically within branches. An object-oriented programming approach is used to represent the model set in the search tree. A modified A (asterisk) best first search algorithm finds the model where the model response best matches the current observations. Several extensions to this methodology are discussed. Methods of possible integration of rules with the current search algorithm are considered to give weight to interpreted trends that may be found in a series of observations. This capability might lead, for instance, to identifying a model that incorporates a progressive damage rather than with incorrect paramenters such as added mass. Another new direction is to consider the use of noisy time domain sensor feedback rather than frequency domain information in the search algorithm to improve the real-time capability of the developed procedure.

Glass, B. J.↗
NASA NTRS1999

Insect-Based Vision for Autonomous Vehicles: A Feasibility Study

The aims of the project were to use a high-speed digital video camera to pursue two questions: i) To explore the influence of temporal imaging constraints on the performance of vision systems for autonomous mobile robots; To study the fine structure of insect flight trajectories with in order to better understand the characteristics of flight control, orientation and navigation.

Srinivasan, Mandyam V.↗
NASA NTRS1999

Modeling Studies of PVT Growth of ZnSe: Current Status and Future Course

Bulk growth of wide band gap II-VI semiconductors by physical vapor transport (PVT) has been developed and refined over the past several years at NASA Marshall Space Flight Center. Results from a modeling study of PVT crystal growth of ZnSe are reported in this paper. The PVT process is numerically investigated using a two-dimensional formulation of the governing equations and associated boundary conditions. Both the incompressible Boussinesq approximation and a compressible model are tested to determine the influence of gravity on the process and to discern the differences between the two approaches. The influence of a residual gas is included in the models. The results show that both the incompressible and compressible approximations provide comparable results and the presence of a residual gas tends to measurably reduce the mass flux in the system. Detailed flow, thermal and concentration profiles are provided. The simulations show that the Stefan flux dominates the system flow field and the subtle gravitational effects can be gauged by subtracting this flux from the calculated profiles. Shear flows, due to solutal buoyancy, of the order of 50 microns/s for the liorizont,-d growth orientation and 10 microns/s for the vertical orientation are predicted. Whether these flows can fully account for the observed gravity related growth morphological effects and inhomogeneous solute and dopant distributions is a matter of conjecture. A template for future modeling efforts in this area is suggested which incorporates a mathematical approach to the tracking of the growth front based on energy of formation concepts.

Ramachandran, N.↗