Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “numerical modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

Sensitivity analysis of numerical modeling input parameters on floating offshore wind turbine loads in extreme idling conditions

Abstract. Floating offshore wind turbine (FOWT) systems are subject to complex environmental loads, with significant potential for damage in extreme storm conditions. Design simulations in these conditions are required to assess the survivability of the device with some level of confidence. Aero-hydro-servo-elastic engineering tools can be used with a reasonable balance of accuracy and computational efficiency. The models require many input parameters to describe the air and water conditions, the system properties, and the load calculations. Each of these parameters has some possible range, due to either statistical uncertainty or variations with time. Variation in the input parameters can have important effects on the uncertainty in the resulting loads, but it is not practical to perform detailed assessments of the impact of this uncertainty for every input parameter. This work demonstrates a method to identify the input parameters that have the most impact on the loads to focus further inspection. The process is done specifically for extreme storm load cases defined in the International Electrotechnical Commission design requirements for floating offshore wind turbines. The analysis was performed using the International Energy Agency Wind 15 MW offshore reference wind turbine atop the University of Maine VolturnUS-S reference platform in two US offshore wind regions, the Gulf of Maine and Humboldt Bay. It was found that the direction of incident waves and current, yaw misalignment, and the length of mooring line sections were among the primary sensitivities.

17 WIND ENERGY↗

Numerical modeling of the polarization current of geminate pairs in disordered polymers with traps

The time dependences of the polarization current of geminate pairs in disordered media are simulated by the Monte Carlo numerical method. A model of hopping transport with exponential energy distribution of the hopping centers is considered. The dependence of the polarization-current kinetics on the initial geminate-pair separation, the relative concentration of traps, the temperature, and the strength of the applied electric field is investigated. The limits of the applicability of an analytical theory based on the driftdiffusion description of electron and hole motion of the geminate pair in the dispersive-transport mode are discussed. The range of parameters is determined in which the existence of the negative current is possible.

36 MATERIALS SCIENCE↗

Kinetic theory-based numerical modeling and analysis of bi-disperse segregated mixture fluidized bed

We discuss a series of continuum Euler-Euler simulations of an initially mixed bi-disperse fluidized bed which segregates under certain operating conditions. The simulations use the multi-phase kinetic theory-based description of the momentum and energy exchanges between the phases by Simonin’s Group [see e.g. Gourdel, Simonin and Brunier (1999). Proceedings of 6th International Conference on Circulating Fluidized Beds, Germany, pp. 205-210]. The discussion and analysis of the results focus on the fluid-particle momentum exchange (i.e. drag). Simulations using mono- and poly-disperse fluid-particle drag correlations are analyzed for the Geldart D-type size bi-disperse gas-solid experiments performed by Goldschmidt et al. [Powder Tech., pp. 135-159 (2003)]. The poly-disperse gas-particle drag correlations account for the local particle size distribution by using an effective mixture diameter when calculating the Reynolds number and then correcting the resulting force coefficient. Simulation results show very good predictions of the segregation index for bidisperse beds with the mono-disperse drag correlations contrary to the poly-disperse drag correlations for which the segregation rate is systematically under-predicted. The statistical analysis of the results shows a clear separation in the distribution of the gas-particle mean relaxation times of the small and large particles with simulations using the mono-disperse drag. In contrast, the poly-disperse drag simulations have a significant overlap and also a smaller difference in the mean particle relaxation times. This results in the small and large particles in the bed to respond to the gas similarly without enough relative time lag. The results suggest that the difference in the particle response time induce flow dynamics favorable to a force imbalance which results in the segregation.

97 MATHEMATICS AND COMPUTING↗

Efficient general method for numerically modeling laser pulse propagation, overlap, and lifetime effects in amplifiers

An efficient numerical time-dependent general method is developed to address incoherent pulse overlap and lifetime effects in laser amplifiers. The alternating propagation-population laser energetics method (APPLE) has been validated against a semi-discrete coupled rate equation numerical method (SDRE) and analytic formalisms in bounding cases. APPLE is based on decoupled rates applied to a time-dependent framework where both space-time-dependent populations and pulse energetics are consistently updated in each time step. A significant advantage of APPLE lies in its conceptual simplicity, ease of implementation, and relatively small computational cost. SDRE tracks the populations through coupled rates and uses the method of lines to discretize the hyperbolic partial differential transport equations allowing for use of ordinary differential equation solvers. With reasonably sized mesh, we report both energetic and power pulse shape relative differences on the order of one percent between the models over a large range of initial conditions.

47 OTHER INSTRUMENTATION↗

Experimental and numerical modeling of heat transfer in directed thermoplates

We present three-dimensional numerical simulations to quantify the design specifications of a directional thermoplate expanded channel heat exchanger, also called dimpleplate. Parametric thermofluidic simulations were performed independently varying the number of spot welds, the diameter of the spot welds, and the thickness of the fluid channel within the laminar flow regime. Results from computational fluid dynamics simulations show an improvement in heat transfer is achieved under a variety of conditions: when the thermoplate has a relatively large cross-sectional area normal to the flow, a ratio of spot weld spacing to channel length of 0.2, and a ratio of the spot weld diameter with respect to channel width of 0.3. Lastly, experimental results performed to validate the model are also presented.

14 SOLAR ENERGY↗

Numerical Modeling of Saturated Boiling in a Heated Tube

This paper describes a mathematical formulation and numerical solution of boiling in a heated tube. The mathematical formulation involves a discretization of the tube into a flow network consisting of fluid nodes and branches and a thermal network consisting of solid nodes and conductors. In the fluid network, the mass, momentum and energy conservation equations are solved and in the thermal network, the energy conservation equation of solids is solved. A pressure-based, finite-volume formulation has been used to solve the equations in the fluid network. The system of equations is solved by a hybrid numerical scheme which solves the mass and momentum conservation equations by a simultaneous Newton-Raphson method and the energy conservation equation by a successive substitution method. The fluid network and thermal network are coupled through heat transfer between the solid and fluid nodes which is computed by Chen's correlation of saturated boiling heat transfer. The computer model is developed using the Generalized Fluid System Simulation Program and the numerical predictions are compared with test data.

Majumdar, Alok↗

Numerical models of thermally and mechanically coupled two-layer convection of highly viscous fluids

Thermal convection in the earth mantle is investigated by means of numerical simulations. The mantle models comprise two horizontal layers of viscous incompressible fluid (with identical or differing properties) separated by a fixed horizontal interface; an isothermal, fixed-heat-flux, or insulating lower boundary; and heat supplied either from below or internally (in the lower layer only, equally in both layers, or primarily in the upper layer). The mathematical formulation of the models is explained, and results for linear stability and finite-amplitude convection are presented in extensive tables and graphs and discussed in detail. Particular attention is given to the presence of thermal coupling without interface distortion in many cases, the predominance of long-wavelength cells in the finite-amplitude models, and the large (50 percent) temperature difference across the interface in all cases.

Ellsworth, Kirk↗

Numerical Modeling of Cometary Meteoroid Streams Encountering Mars and Venus

We have simulated numerically the existence of meteoroid streams that encounter the orbits of Mars and Venus, potentially producing meteor showers at those planets. We find that 17 known comets can produce such showers, the intensity of which can be determined through observations. Six of these streams contain dense dust trails capable of producing meteor outbursts.

Christou, A. A.↗

Numerical modeling of impurity powder injection in W7-X

In this work, we present numerical simulation results of powder injection in W7-X using the EMC3-EIRENE and DIS codes. First, we model powder injection experiments performed in W7-X with the Probe Mounted Powder Injector. The simulation results qualitatively agree with visible imaging measurements. Secondly, we perform predictive simulations to guide the installation of an Impurity Powder Dropper in W7-X, allowing to choose in between several available non-vertical ports to maximize the amount of powder penetrating into the plasma, as well as the verticality of the port, to minimize sticking of the powders in the in-vessel stainless steel guiding tube. Port AEM41 is selected as the best candidate for IPD installation. The robustness of the simulation results has been verified for different plasma densities, powder materials and sizes, powder friction coefficient and changes in the plasma flow.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Regional eddy vorticity transport and the equilibrium vorticity budgets of a numerical model ocean circulation

A mean vorticity budget analysis is presented of Holland's (1978) numerical ocean general circulation experiment. The stable budgets are compared with classical circulation theory to emphasize the ways in which the mesoscale motions of the model alter (or leave unaltered) classical vorticity balances. The basinwide meridional transports of vorticity by the mean flow and by the mesoscale flow in the mean are evaluated to establish the role(s) of the mesoscale in the larger scale equilibrium vorticity transports. The vorticity equation for this model fluid system is presented and the budget analysis method is described. Vorticity budgets over the selected regions and on a larger scale are given, and a summary of budget results is provided along with remarks about the utility of this type of analysis.

Harrison, D. E.↗

Comparisons among second-order, fourth-order, and pseudospectral advection techniques in a mesoscale numerical model

The reported investigation is concerned with mesoscale squall-line simulation utilizing numerical techniques. Particular attention is given to fourth-order results and their implications for the dynamical evolution of mesoscale squall-line systems which contain severe local storms. An adiabatic inviscid set of prognostic equations is utilized in a z coordinate system for the fundamental experiment. The fourth-order advection is employed for all time-dependent equations. The Euler-backward time marching scheme is utilized with a 60 second time step. The horizontal mesh length is 42 km. Horizontal diffusion is accomplished by utilizing a smoother-desmoother. Lateral boundary conditions are designed to reduce the development of strong gradients in dependent variables near the boundaries by bringing interior values from the grid to the boundaries.

Kaplan, M.↗

Numerical modeling of chemical vapor deposition (CVD) in a horizontal reactor

In the present numerical prediction of the deposition rate of silicon from silane in a CVD process, the conservation equations for mass, momentum, energy, and chemical species are solved on a staggered grid using the SIMPLE algorithm, while the rate of chemical reactions in the gas phase and on the susceptor surface is obtained from an Arrhenius rate equation. Predicted deposition rates as a function of position along the susceptor with and without the gas phase chemical reaction are compared with the available experimental and numerical data; agreement is excellent except at the leading edge of the susceptor, where the deposition rate is overpredicted.

Sheikholeslami, M. Z.↗

Numerical Modeling of Three-Dimensional Fluid Flow with Phase Change

We present a numerical method to compute phase change dynamics of three-dimensional deformable bubbles. The full Navier-Stokes and energy equations are solved for both phases by a front tracking/finite difference technique. The fluid boundary is explicitly tracked by discrete points that are connected by triangular elements to form a front that is used to keep the stratification of material properties sharp and to calculate the interfacial source terms. Two simulations are presented to show robustness of the method in handling complex phase boundaries. In the first case, growth of a vapor bubble in zero gravity is studied where large volume increase of the bubble is managed by adaptively increasing the front resolution. In the second case, growth of a bubble under high gravity is studied where indentation at the rear of the bubble results in a region of large curvature which challenges the front tracking in three dimensions.

Esmaeeli, Asghar↗

Calculation Of The Nanbu-Trubnikov Kernel: Implications For Numerical Modeling Of Coulomb Collisions

We investigate the accuracy of and assumptions underlying the numerical binary Monte-Carlo collision operator due to Nanbu [K. Nanbu, Phys. Rev. E 55 (1997)]. The numerical experiments that resulted in Nanbu's parameterized collision kernel are approximate realizations of the Coulomb-Lorentz pitch-angle scattering process, for which an analytical solution is available. It is demonstrated empirically that Nanbu's collision operator quite accurately recovers the effects of Coulomb-Lorentz pitch-angle collisions, or processes that approximate these even for very large values of the collisional time step. An investigation of the analytical solution shows that Nanbu's parameterized kernel is highly accurate for small values of the normalized collision time step, but loses some of its accuracy for larger values of the time step. Finally, a practical collision algorithm is proposed that for small-mass-ratio Coulomb collisions improves on the accuracy of Nanbu's algorithm.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Numerical modeling of cold magmatic CO 2 flux measurements for the exploration of hidden geothermal systems

The most accepted conceptual model to explain surface degassing of cold magmatic CO 2 in volcanic-geothermal systems involves the presence of a gas reservoir. Here, numerical simulations using the TOUGH2-ECO2N V2.0 package are performed to get quantitative insights into how cold CO 2 soil flux measurements are related to reservoir and fluid properties. While the modeling is based on flux data measured at a specific geothermal site, the Acoculco caldera (Mexico), some general insights have been gained. Both the CO 2 fluxes at the surface and the depth at which CO 2 exsolves are highly sensitive to the dissolved CO 2 content of the deep fluid. If CO 2 mainly exsolves above the reservoir within a fracture zone, the surface CO 2 fluxes are not sensitive to the reservoir size but depend on the CO 2 dissolved content and the rock permeability. For gas exsolution below the top of the reservoir, surface CO 2 fluxes also depend on the gas saturation of the deep fluid as well as the reservoir size. The absence of thermal anomalies at the surface is mainly a consequence of the low enthalpy of CO 2 . The heat carried by CO 2 is efficiently cooled down by heat conduction and to a certain extent by isoenthalpic volume expansion depending on the temperature gradient. Thermal anomalies occur at higher CO 2 fluxes (>37,000 g m -2 d -1 ) when the heat flux of the rising CO 2 is not balanced anymore. Lastly, specific results are obtained for the Acoculco area (reservoir depth, CO 2 dissolved content, and gas saturation state).

58 GEOSCIENCES↗

Numerical modeling and experimental validation of low velocity impact of woven GFRP/CFRP composites

Low-velocity impact of 2D woven glass fiber reinforced polymer (GFRP) and carbon fiber reinforced polymer (CFRP) composite laminates was studied experimentally and numerically. Hybrid laminates containing blocked layers of GFRP/CFRP/GFRP with all plies oriented at 0° were investigated. Relatively high impact energies were used to obtain full perforation of the laminate in a low-velocity impact setup. Numerical simulations were carried out using the in-house transient dynamics finite element code, Sierra/SM, developed at Sandia National Laboratories. A three-dimensional continuum damage model was used to describe the response of a woven composite ply. Two methods for handling delamination were considered and compared: (1) cohesive zone modeling and (2) continuum damage mechanics. The reduced model size achieved by omission of the cohesive zone elements produced acceptable results at reduced computational cost. Further, the comparison between different modeling techniques can be used to inform modeling decisions relevant to low velocity impact scenarios. The modeling was validated by comparing with the experimental results and showed good agreement in terms of predicted damage mechanisms and impactor velocity and force histories.

36 MATERIALS SCIENCE↗

Numerically modeling stochastic inflation in slow-roll and beyond

In this work, we present a complete numerical treatment of inflationary dynamics under the influence of stochastic corrections from sub-Hubble modes. We discuss how to exactly model the stochastic noise terms arising from the sub-Hubble quantum modes that give rise to the coarse-grained inflaton dynamics in the form of stochastic differential equations. The stochastic differential equations are solved event by event on a discrete time grid. We then compute the power spectrum of curvature perturbations that can be compared with the power spectrum computed in the traditional fashion using the Mukhanov-Sasaki equation by canonically quantizing the inflaton fluctuations. Our numerical procedure helps us to easily extend the formalism to ultra slow-roll inflation and study the possibility of primordial black hole formation.

79 ASTRONOMY AND ASTROPHYSICS↗