Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “numerical errors”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
NASA NTRS1987

Effect of atmospheric turbulence on the bit error probability of a space to ground near infrared laser communications link using binary pulse position modulation and an avalanche photodiode detector

The effect of atmospheric turbulence on the bit error rate of a space-to-ground near infrared laser communications link is investigated, for a link using binary pulse position modulation and an avalanche photodiode detector. Formulas are presented for the mean and variance of the bit error rate as a function of signal strength. Because these formulas require numerical integration, they are of limited practical use. Approximate formulas are derived which are easy to compute and sufficiently accurate for system feasibility studies, as shown by numerical comparison with the exact formulas. A very simple formula is derived for the bit error rate as a function of signal strength, which requires only the evaluation of an error function. It is shown by numerical calculations that, for realistic values of the system parameters, the increase in the bit error rate due to turbulence does not exceed about thirty percent for signal strengths of four hundred photons per bit or less. The increase in signal strength required to maintain an error rate of one in 10 million is about one or two tenths of a db.

Safren, H. G.↗
NASA NTRS1995

On the Calculation of Anisotropic Extinction Coefficients for Rigid Fibrous Ceramic Insulations

The specific anisotropic extinction coefficient e* couples the effective Radiative properties of a fibrous insulation into the radiation diffusion equation. This coefficient can be calculated using Mie scattering theory if fiber diameters, refractive indices and fiber orientation distributions are known. In general, fiber orientation distributions are not readily accessible and past calculations have considered fibers as either randomly distributed or normal to the heat flow direction. In certain rigid fibrous ceramic insulations neither of these cases apply well and a simple procedure is described for approximating e* from values calculated for the random and normal orientation cases. The intrinsic error associated with this scaling procedure is investigated. Numerical computations for several test structures and fiber materials show the average error to be less than 5% for net heat flux and radiation conductivity calculations.

Marshall, Jochen↗
NASA NTRS2017

Electric Field Conjugation in the Presence of Model Uncertainty

The Wide-Field Infrared Survey Telescope (WFIRST) is a 2.4-meter-diameter space telescope NASA program. The payload will include a coronagraph instrument (CGI). The CGI designs under development use deformable mirrors (DM) to create a point spread function (PSF) with a dark region around the obscured star object. Electric field conjugation (EFC) is an iterative nonlinear optimization procedure that uses measurements of the electric field at the image to determine the DM displacements to modify the PSF to create the region of high contrast in the image. EFC requires a numerical model of the coronagraph to calculate the Jacobian of the system, which is used, along with regularization, to solve for the DM displacements for each iteration of the nonlinear optimization. Ideally, the coronagraph is aligned and calibrated, and the calibration data are used in the numerical model for calculating the Jacobian. However, calibration and alignment measurements always contain uncertainty resulting in calibration error. Therefore, the Jacobian calculated from the numerical model is not an exact representation of the physical coronagraph, and the resulting DM solution for an EFC iteration does not have the exact impact on the electric field of the coronagraph as predicted by the EFC. The result is slow convergence, and, as will be shown, drives the use of more restrictive regularization. Using Monte Carlo trials, we investigate the effect of calibration error on EFC convergence and regulatization. Comparison to results from the High Contrast Imaging Testbed Hybrid Lyot Coronagraph are also presented.

Marx, David↗
NASA NTRS1993

On the Effects of a Spacecraft Subcarrier Unbalanced Modulator

This paper presents mathematical models with associated analysis of the deleterious effects which a spacecraft's subcarrier unbalanced modulator has on the performance of a phase-modulated residual carrier communications link. The undesired spectral components produced by the phase and amplitude imbalances in the subcarrier modulator can cause (1) potential interference to the carrier tracking and (2) degradation in the telemetry bit signal-to-noise ratio (SNR). A suitable model for the unbalanced modulator is developed and the threshold levels of undesired components that fall into the carrier tracking loop are determined. The distribution of the carrier phase error caused by the additive White Gaussian noise (AWGN) and undesired component at the residual RF carrier is derived for the limiting cases. Further, this paper analyses the telemetry bit signal-to-noise ratio degradations due to undesirable spectral components as well as the carrier tracking phase error induced by phase and amplitude imbalances. Numerical results which indicate the sensitivity of the carrier tracking loop and the telemetry symbol-error rate (SER) to various parameters of the models are also provided as a tool in the design of the subcarrier balanced modulator.

Nguyen, Tien Manh↗
NASA NTRS1985

Numerical and analytic descriptions of cosmic-ray transport

It is not trivial to solve the equations that describe charged particle transport with the aid of computers, for instabilities, inaccuracies, and subtle artifacts are well known afflictions of numerical analysis. Two specific points are discussed. First to avoid inaccuracies, pitch angle scattering must be treated with great care. In particular, slightly inappropriate numerical formulations give rise to mean free paths that are in error by large factors. Secondly, A previously unrecognized artifact, numerical dispersion, is very similar to the physical phenomenon of dispersion. To avoid misinterpretations arising from this similarity, the spatial increment of the finite difference grid must be a small fraction of the mean free path. These points are illustrated by calculations based upon finite difference approximations to the transport equation.

Earl, J. A.↗
NASA NTRS1979

Applying integrals of motion to the numerical solution of differential equations

A method is developed for using the integrals of systems of nonlinear, ordinary differential equations in a numerical integration process to control the local errors in these integrals and reduce the global errors of the solution. The method is general and can be applied to either scaler or vector integrals. A number of example problems, with accompanying numerical results, are used to verify the analysis and support the conjecture of global error reduction.

Jezewski, D. J.↗
NASA NTRS1980

Applying integrals of motion to the numerical solution of differential equations

A method is developed for using the integrals of systems of nonlinear, ordinary, differential equations in a numerical integration process to control the local errors in these integrals and reduce the global errors of the solution. The method is general and can be applied to either scalar or vector integrals. A number of example problems, with accompanying numerical results, are used to verify the analysis and support the conjecture of global error reduction.

Vezewski, D. J.↗
NASA NTRS1972

Numerical and Experimental Studies of the Natural Convection Flow Within a Horizontal Cylinder Subjected to a Uniformly Cold Wall Boundary Condition

Numberical solutions are obtained for the quasi-compressible Navier-Stokes equations governing the time dependent natural convection flow within a horizontal cylinder. The early time flow development and wall heat transfer is obtained after imposing a uniformly cold wall boundary condition on the cylinder. Solutions are also obtained for the case of a time varying cold wall boundary condition. Windware explicit differ-encing is used for the numerical solutions. The viscous truncation error associated with this scheme is controlled so that first order accuracy is maintained in time and space. The results encompass a range of Grashof numbers from 8.34 times 10,000 to 7 times 10 to the 7th power which is within the laminar flow regime for gravitationally driven fluid flows. Experiments within a small scale instrumented horizontal cylinder revealed the time development of the temperature distribution across the boundary layer and also the decay of wall heat transfer with time.

Stewart, R. B.↗
NASA NTRS1979

Onboard Navigation Systems Characteristics

The space shuttle onboard navigation systems characteristics are described. A standard source of equations and numerical data for use in error analyses and mission simulations related to space shuttle development is reported. The sensor characteristics described are used for shuttle onboard navigation performance assessment. The use of complete models in the studies depend on the analyses to be performed, the capabilities of the computer programs, and the availability of computer resources.

Source record↗
NASA NTRS1977

Double quadriphase modulation/demodulation technique for three-channel communication link

A modulation technique for a three-channel communication link is introduced. The structure of the modulator is such as to form an unbalanced quadriphase signal wherein the high rate data stream is bi-phase modulated on the in-phase carrier component, while the sum of the two lower rate signals is bi-phase modulated on the quadrature component of the same carrier. The sum of the two lower signals is, in turn, formed by modulating with the respective data streams the in-phase and the quadrature components of a square wave subcarrier. At the demodulator, the tracking of the carrier and the subcarrier is performed by two independent Costas loops. The demodulation of the high data rate signal is carried out after establishing the carrier reference signal, while the lower rate signals are demodulated after the subcarrier loop recovers the subcarrier. In this paper, the performance of the two loops is analyzed and the expressions for the tracking errors are derived. Finally, a numerical example pertaining to the Space Shuttle-to-TDRS Ku-band link is presented for illustration.

Alem, W. K.↗
NASA NTRS1985

Medium range forecasting: The experience of ECMWF

The results of five years of operational medium-range forecasts at ECMWF is discussed. It is shown that a considerable improvement in predictive skill has taken place, resulting in more accurate forecasts and an extension in time of useful predictive skill. For the Northern Hemisphere extratropics, the improvement in skill during the winter season is about three days for the 500-mb geopotential compared to the very first experiments in the early 1970s. Three are large geographical and temporal variations in the performance of the model, as well as large-scale errors of a systematic nature. Numerical experiments have indicated great sensitivity to the representation of orography and to tropical forcing.

Bengtsson, L.↗
NASA NTRS1986

A spline-based parameter estimation technique for static models of elastic structures

The problem of identifying the spatially varying coefficient of elasticity using an observed solution to the forward problem is considered. Under appropriate conditions this problem can be treated as a first order hyperbolic equation in the unknown coefficient. Some continuous dependence results are developed for this problem and a spline-based technique is proposed for approximating the unknown coefficient, based on these results. The convergence of the numerical scheme is established and error estimates obtained.

Dutt, P.↗
NASA NTRS1989

Structural damage assessment as an identification problem

Damage assessment of structural assemblies is treated as an identification problem. A brief review of identification methods is first presented with particular focus on the output error approach. The use of numerical optimization methods in identifying the location and extent of damage in structures is studied. The influence of damage on eigenmode shapes and static displacements is explored as a means of formulating a measure of damage in the structure. Preliminary results obtained in this study are presented and special attention is directed at the shortcomings associated with the nonlinear programming approach to solving the optimization problem.

Hajela, Prabhat↗
NASA NTRS1988

The Galerkin/least-squares method for advective-diffusive equations

Galerkin/least-squares finite-element methods are presented for advective-diffusive equations. Galerkin/least-squares represents a conceptual simplification of streamline-upwind Petrov-Galerkin methods, and is in fact applicable to a wide variety of other problem types. A convergence analysis and error estimates are presented. Some numerical results for compressible Navier-Stokes flows are presented.

Hughes, T. J. R.↗
NASA NTRS1989

A spline-based parameter estimation technique for static models of elastic structures

The problem of identifying the spatially varying coefficient of elasticity using an observed solution to the forward problem is considered. Under appropriate conditions this problem can be treated as a first order hyperbolic equation in the unknown coefficient. Some continuous dependence results are developed for this problem and a spline-based technique is proposed for approximating the unknown coefficient, based on these results. The convergence of the numerical scheme is established and error estimates obtained.

Dutt, P.↗
NASA NTRS1992

Analysis of stellar occultation data for planetary atmospheres. I - Model fitting, with application to Pluto

Consideration is given to an analytic model for a stellar-occultation light curve developed for a small, spherically symmetric planetary atmosphere that includes thermal and molecular weight gradients in a region that overlies an extinction layer. The model incorporates two equivalent sets of parameters. One set specifies the occultation light curve in terms of signal levels, times, and time intervals. The other set specifies physical parameters of the planetary atmosphere. Equations are given for the transforming between the sets of parameters, including their errors and correlation coefficients. Detailed numerical calculations are presented for a benchmark case. The results obtained are consistent with the isothermal prediction of the 'methane-thermostat' model of Pluto's atmosphere.

Elliot, J. L.↗