Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “nuclear data evaluation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Nuclear Data Sheets for A=64

The evaluated experimental data are presented and evaluated for 13 known nuclides of mass 64 (Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Ga, Ge, As, Se). For each nuclide, the best values combining all available data are recommended for spectroscopic properties. No excited states have been identified in 64 Ti, 64 As, and 64 Se. Only one excited state in 64 V as an isomer, and three in 64 Cr have been identified. Data for excited states in 64 Mn, 64 Fe, and 64 Co remain limited. 64 Ni, 64 Cu, and 64 Zn are the most studied nuclides through various reactions and decays, followed by 64 Ga and 64 Ge. In the opinion of the evaluators, there are several incomplete or discrepant aspects of the high-spin portion of the level scheme for 64 Zn above ≈5 MeV excitation which need to be resolved in further experiments using large γ-detector arrays. The decay schemes of 64 Ti β - , 64 As ε and 64 Se ε are unknown, while very little information is available for 64 V β - and 64 Cr β - . The decay schemes of 64 Mn β - , 64 Fe β - , 64 Co β - and 64Ge ε are somewhat better known, but still considered incomplete by evaluators. The decay scheme of 64 Ga ε decay is known in detail, however there is the possibility of additional levels populated above 4713 keV, as the Q(ε) value is 7171 keV. The β - , β + and ε decay modes of 64 Cu are well known, as this radionuclide is of great importance in applications, for example, as a dosimeter for neutron flux determination in nuclear reactors, and as a radiopharmaceutical for positron emission tomography (PET). This work supersedes earlier full evaluations of A=64 by 2007Si04, 1996Si12, 1991Si03, 1979Ha35 and 1974Au04.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2021

Nuclear Data Sheets for A=100

Here, evaluated experimental data are presented for 15 known nuclides of mass 100 (Kr, Rb, Sr, Y, Zr, Nb, Mo, Tc, Ru, Rh, Pd, Ag, Cd, In, Sn). Recommended values are given for level parameters, γ and β radiations, and other spectroscopic information. No excited states are known in 100 Rb and 100 Sn. Except for isotopic identification, no information is available for the decay of the 100 Kr isotope, and limited information is known about the decay properties of the 100 Sn isotope. According to Fig. 2 (A/Q versus counts plot) and as mentioned in the text in 2021Su01, 100 Br isotope was not observed, although, discovery of 101 Br was claimed in this work. In the case of 100 Pd, the agreement in the orderings of the γ-ray cascades and γ-ray inventory between various studies of high-spin structures remains poor at high excitation energies (>9 MeV). For 100 Y, the assignments of the two previously known half-lives to the respective states (g.s. and the 145-keV isomer) remain to be established. Here, this work supersedes earlier full evaluations of A=100 by 2008Si01, 1997Si09, 1990Si05 and 1974Ko37.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Nuclear Criticality Safety Integral Experiment Covariance Determination

Integral benchmarks for criticality safety and nuclear data validation require expensive uncertainty quantification studies. Commonly, the uncertainty quantification ignores correlations between experiments that share components. Experiments such as the TEX (Thermal/Epithermal eXperiments) campaigns consist of many shared parts, such as fuel, which create a strong correlation in their uncertainties. While these correlations are known to exist, they are often not estimated due to the complexity of such calculations. This paper describes a software package that uses an intuitive method of determining the covariance for each of the experimental components, providing a correlation matrix for each family of parts across the multiple cases examined within a benchmark. The code uses the TEX-HEU campaign as a proof of concept, and we show that the correlations can be calculated with information commonly found in ICSBEP (International Criticality Safety Benchmark Evaluation Project) benchmarks. The estimated covariances are used in χ 2 trending studies to evaluate their impact on nuclear data validation. Without covariances, χ 2 per degree of freedom was calculated as 2.203 and with covariances it was 1.179. The difference shows that omitting covariance information may cause overly pessimistic bias quantifications. The covariance determination code can be easily integrated into current benchmark evaluations as well as reevaluating legacy benchmark uncertainties. Uncertainty correlation calculations should become the baseline for criticality safety integral experiment benchmarks and can now be easily calculated with the described software package.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Comparative critical mass calculations for NNL and ENDF/B-VIII.0 - Zirconium hydride thermal neutron scattering laws

Zirconium hydride (ZrH{sub x}) is a moderator material for TRIGA reactors and historical space reactor systems, such as SNAP-10A. Thermal neutron scattering laws (TSL) for two phases of this material, δ and ε, have been previously evaluated by Naval Nuclear Laboratory (NNL) and submitted to the National Nuclear Data Center (NNDC) for inclusion in the US national ENDF/B-VIII.1 nuclear data library. In contrast to the current ENDF/B-VIII.0 TSL evaluations, which consider only a single phase, the new evaluations are derived from separate ab initio calculations for both phases and include coherent elastic effects of the zirconium sublattice. To estimate the impact of these changes to the TSL evaluation of this material, comparative critical mass calculations were performed with MC21 for homogenous mixtures of high-enriched uranium (HEU) and ZrH{sub x} in bare and water reflected sphere configurations. These calculations yield an impact on the estimated critical mass as a function of {sup 235}U loading density with maximum differences as large as 1% - 5% for over-moderated thermal spectrum systems. Consequently, the NNL TSL evaluations are anticipated to have a small impact on criticality calculations of thermal reactor systems regardless of the material phase. Nevertheless, characteristic differences exist in the predicted thermal spectra as function of energy for the two sets of TSL evaluations, which are attributed to difference in the underlying phonon density of states of hydrogen bound in ZrH{sub x}. (authors)

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2022

Nuclear Structure and Decay Data for A=149 Isobars

Here, experimental nuclear structure and decay data are evaluated for all the 17 known nuclides of mass 149 (Xe, Cs, Ba, La, Ce, Pr, Nd, Pm, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb). Detailed compiled and evaluated spectroscopic information is presented for each reaction and decay dataset, and recommended values are provided for level properties, α, β and γ radiations, and other spectroscopic parameters, based on an evaluation of all the available experimental data for A=149 isobaric nuclides. Although large amounts of nuclear spectroscopic data are available for nuclides of A=149, yet large gaps in knowledge exist, as described below. For the lowest atomic number nuclide 149 Xe, only the isotopic identification has been made, with no data for its ground-state half-life. For 149 Cs, 149 Tm and 149 Yb information is available for only the respective ground states. For 149 Ba, 149 La and 149 Er, limited data exist for excited states. Many of the decay schemes of radioactive nuclei of A=149 are considered as incomplete, either due to large energy differences between the highest observed excited states in daughter nuclides and the respective Q-values, or due to the lack of confirmed γ-ray data, as listed below: 149 Cs → 149 Ba, 149 Ba → 149 La, 149 La → 149 Ce, 149 Ce → 149 Pr, 149 Pr → 149 Nd, 149 Tb(4.17 min) → 149 Gd, 149 Ho(21.0 s and 56 s) → 149 Dy, 149 Er(4 s and 9.6 s) → 149 Ho, and 149 Tm → 149 Er. No data exist for the decay of 149 Yb to 149 Tm. Data for half-lives of the excited states in this mass chain are generally lacking as given below by the number of excited levels of known half-life / approximate number of known levels in a nuclide: 2/17 for 149 Ba, 0/18 for 149 La, 3/53 for 149 Ce, 3/44 for 149 Pr, 17/110 for 149 Nd, 9/90 for 149 Pm, 10/210 for 149 Sm, 2/125 for 149 Eu, 6/270 for 149 Gd, 5/200 for 149 Tb, 3/80 for 149 Dy, 3/90 for 149 Ho, and 3/14 for 149 Er. This work supersedes earlier evaluations of A=149 nuclides published by 2004Si16, 1994Si18, 1985Sz01 and 1976Ho17.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2023

Updated evaluation of potential ultralow Q -value β -decay candidates

“Ultralow” Q-value β decays are referred to as such due to their low decay energies of less than ≈1 keV. Such a low energy decay is possible when the parent nucleus decays to an excited state in the daughter, with an energy close to that of the Q value. These decays are of interest as potential new candidates for neutrino mass determination experiments and as a testing ground for studies of atomic interference effects in the nuclear decay process. In this paper, we provide an updated evaluation of atomic mass data and nuclear energy-level data to identify potential ultralow Q-value β decay candidates. For many of these candidates, more precise and accurate atomic mass data is needed to determine if the Q value of the potential ultralow decay branch is energetically allowed and in fact ultralow. Furthermore, the relevant precise atomic mass measurements can be achieved via Penning trap mass spectrometry.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Pebble Tanker Model for Nuclear Criticality Safety Needs

This report documents a study performed to investigate the requirements for criticality safety benchmark experiments for high-assay, low-enriched uranium (HALEU) fuel in transportation applications. In this work, an exploratory application model, the “Pebble Tanker,” was developed to represent TRISO fuel in a transportation scenario for an analysis of the validation basis in industrial quantities. An aspect of the criticality validation process involves assessing the “similarity” between application and experimental benchmark systems through an integral index parameter evaluation. Here, this includes propagating nuclear data uncertainties and calculating a correlation coefficient (hereinafter referred to as “c k ”) to evaluate the similarity of benchmark experiments compared with the application Pebble Tanker model. Finding sufficient critical benchmark experiments allows for the evaluation of bias and bias uncertainty, thus determining the upper subcritical limit (USL) of the transportation package. A target k eff of ~0.94 was used in this work to establish appropriate modeling conditions, reflecting a reasonable estimate for a USL. Two container models were investigated: one with the Hermes-type pebble and one with the Pebble Bed Modular Reactor (PBMR)–type pebble. The models were simplified, considering only fuel, containment structure, and either water or air. This allows a focus on the underlying physics of applications involving TRISO fuel pebbles using the Pebble Tanker model. A crucial consideration is the transport package's ability to safely hold pebbles while flooded, maintaining subcritical conditions. Tools available in the SCALE 6.3.1 suite—the CSAS6-Shift, TSUNAMI-3D-Shift, and TSUNAMI-IP sequences—were employed for neutronics and sensitivity and uncertainty (S/U) analysis of the Pebble Tanker. Findings demonstrated sufficient available critical experiment benchmarks to perform a validation of the Pebble Tanker in the most reactive state, i.e., when the Tanker is flooded.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2020

Relevant Advanced Reactor Benchmarks for Nuclear Data Assessment

Advanced reactor concepts currently being developed throughout the industry are significantly different from light water reactor (LWR) designs with respect to geometry, materials, and operating conditions, and consequently, with respect to their reactor physics behavior. Given the limited operating experience with non-LWRs, the accurate simulation of reactor physics and the quantification of associated uncertainties are critical for ensuring that advanced reactor concepts operate within the appropriate safety margins. Nuclear data are a major source of input uncertainties in reactor physics analysis. As part of an ongoing project at Oak Ridge National Laboratory, the effects of nuclear data uncertainties on key figures of merit associated with advanced reactor safety are being assessed for selected advanced reactor technologies. Key nuclear data relevant for reactor safety analysis for each selected advanced reactor technology were identified in Phase 1, and their impact on important key figures of merit was assessed in Phase 2. This report describes the outcome of Phase 3. Available benchmarks and fuel irradiation data for use in evaluating the impact of uncertainties and gaps in nuclear data that impact reactivity control for advanced reactor designs through the fuel cycle were identified and assessed. Benchmarks were identified by searching (1) the Organisation for Economic Co-operation and Development (OECD)/Nuclear Energy Agency (NEA) International Criticality Safety Benchmark Evaluation Project (IRPhEP) handbook, (2) the OCED/NEA International Reactor Physics Experiment Evaluation Project (IRPhEP) handbook, (3) ongoing OECD/NEA benchmark activities, and (4) documentation in public literature. Relevant benchmarks were identified by selecting reactors with geometry, materials, and neutron energy spectra similar to those of selected advanced reactor technologies. This assessment identified six benchmarks, of which three are experimental and three are purely computational. One experimental and one computation benchmark contain depleted fuel; all others are limited to fresh fuel. This report provides short descriptions of the selected benchmarks along with the availability of measured data for comparison.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2020

Availability of Shielding Benchmark Experiment Data in the ICSBEP Handbook

The International Criticality Safety Benchmark Evaluation Projects (ICSBEP) has over two decades of experience under the auspices of the Organisation for Economic Co-operation and Development (OECD) Nuclear Energy Agency (NEA) to identify, evaluate, and compile a comprehensive data set of criticality safety benchmark data [1]. The activities of the ICSBEP have led to the continued success of the International Handbook of Evaluated Criticality Safety Benchmark Experiments (ICSBEP Handbook) [2]. The contents of the ICSBEP Handbook include benchmark specifications derived from nuclear facilities around the world, which have been utilized to support criticality safety efforts and also integral testing of nuclear data [3]. The 2020 edition of the ICSBEP Handbook will include data from 582 evaluations containing benchmark specifications for 5,053 critical, subcritical, or near-critical configurations. There are seven criticality-alarm-placement/shielding evaluations containing a total of 45 benchmark configurations, and ten fundamental physics evaluations containing a total of 237 measurements relevant to criticality safety applications. The purpose of this paper is to summarize those benchmarks relative to validation needs in shielding applications currently found within the ICSBEP Handbook. The current and future plans of shielding benchmarks with regards to the ICSBEP will also be discussed.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Kinematics reconstruction in solenoidal spectrometers operated in active target mode

Here, we discuss the reconstruction of low-energy nuclear reaction kinematics from charged-particle tracks in solenoidal spectrometers working in Active Target Time Projection Chamber mode. In this operation mode, reaction products are tracked within the active gas medium of the Active Target with a three dimensional space point cloud. We have inferred the reaction kinematics from the point cloud using an algorithm based on a linear quadratic estimator (Kalman filter). The performance of this algorithm has been evaluated using experimental data from nuclear reactions measured with the Active Target Time Projection Chamber (AT-TPC) detector.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2024

Resolved Resonance Evaluation for Neutron Interactions with 103 Rh up to 8 keV

A neutron cross-section evaluation for the n + 103 Rh reaction in the resolved resonance region was carried out in the energy range 10−5 eV to 8 keV encompassing thermal energy at 0.0253 eV. The scope of this work is to generate resonance parameters and resonance parameter covariances based on the Reich-Moore reduced R-matrix formalism using the code SAMMY. Some features of the new evaluation are the inclusion of high-resolution capture data in the SAMMY evaluation process and the extension of the resolved resonance range from 4 to 8 keV. Furthermore, the evaluation employs more accurate resonance parameter representation by exploring the use of the LRF = 7 ENDF feature and also the use of the LCOMP = 2 compact format for resonance parameter covariance representation. Included in the SAMMY evaluation are transmission data, capture cross-section data, and neutron scattering length information. Thermal cross-section values listed in the literature, as well as capture resonance integrals, were also incorporated into the evaluation process.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Delayed Critical and Subcritical Experiments with Polyethylene Moderated Unreflected Thin 15 in. Diameter HEU Metal Plates

The thin ~15 in. diameter highly enriched uranium (HEU) metal plates were assembled to delayed criticality at the Oak Ridge Critical Experiments Facility (ORCEF) in 1969 with various thicknesses of polyethylene (varying from 1/16 to 2$\frac{3}{8}$ inches) between uranium metal plates. The average 235 U enrichment was 93.27 wt. %. These unreflected critical configurations contained 4$\frac{2}{3}$ to 20$\frac{5}{6}$ thin 15 in. diameter HEU metal plates (on loan from Los Alamos National Laboratory [LANL] and shipped to Oak Ridge National Laboratory [ORNL] on June 3, 1969). Depending on the thickness of polyethylene, the enriched uranium masses varying from 28,053 to 135,148 grams. Fractional plate sections consisted of the appropriate number of 60° pie sections. In addition to the measurement at delayed criticality, subcritical measurements were also performed by the inverse kinetic rod drop method. Prompt neutron decay constant measurements were also performed by the Rossi alpha and randomly pulsed neutron method using a time-tagged spontaneous fission californium neutron source; these are briefly reported here. At the time of these measurements in 1969, the thin HEU metal plates were in near-pristine condition with extremely little oxidation, allowing better descriptions of the uranium plates than the use of these plates in a heavily oxidized and deteriorated condition in recent reflected benchmark experiments at the LANL facility at the Nevada Test Site with these same thin highly enriched uranium metal plates. This report documents the experimental information for the measurements performed so that later researchers can perform the required uncertainty and calculational analyses and documentation to use these data for an International Nuclear Criticality Safety Benchmark Evaluation Program (ICSBEP) or a Nuclear Energy Agency (NEA) benchmark. Data from the experiments described should be acceptable for use as criticality safety benchmark experiments for the ICSBEP and the NEA nuclear criticality safety benchmark program once the uncertainty analysis on the measured neutron multiplication factors is completed. Additional data—such as the dimensional inspection reports, uranium isotopic information, and other relevant particulars—should be retrieved from the Y-12 Plant or LANL and incorporated in the final ICSBEP benchmark. Based on previous ICSBEP benchmarks with this enriched uranium metal at ORCEF, the uncertainties in $k_{eff}$ could be as low as ± 0.0002 for some configurations. Other experiments with smaller-diameter than 15 in. diameter HEU metal plates have been benchmarked in HEU-METFAST-001. The prompt neutron time decay measurements could be the basis for an International Reactor Physics Benchmark Program. Preparation of the present report is part of an effort at ORNL to document more than 15 undocumented critical and subcritical experiments enumerated in ORNL/TM-2019/18 and performed by ORNL at ORCEF and other US Department of Energy critical experiments facilities using more than 500 operational days of critical facility time. This work for this report publication was supported by the Nuclear Criticality, Radiation Transport and Safety NCSP Program at ORNL.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2022

Easy_PERT: a Python tool for writing PERT cards and parsing PERT card results [Slides]

This presentation begins by providing an overview of the PERT card. The PERT card uses differential operator method to compute first- and second-order tally variations due to density, composition, and reaction cross-sections. It is possible to have multiple PERT cards in one MCNP input deck to study tally variations for several sets of nuclides, reactions, and energy ranges. Furthermore, the METHOD option tells MCNP to calculate either the perturbed tally (METHOD=-1, -2, -3) or the change in the unperturbed tally (METHOD=1, 2, 3). In summation, a powerful use-case for the MCNP code PERT card is that it facilitates calculating tally sensitivities to nuclear data. Writing PERT card entries and parsing output MCTAL files is tedious and error prone. however, Easy_PERT makes use of existing tools (Faust and MCNPTools) to handle writing PERT card entries and parsing the output MCTAL files. The PERT card is early in the development process and planned upcoming capabilities include calculating sensitivities and combining MCTAL files from separate runs into one JSON file.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

IER 516 - Zirconium Test Assembly (ZTA) Preliminary Experimental Design [Slides]

Zirconium present in large quantities in criticality safety applications such as fuel manufacturing and processing facilities, and in commercial thermal nuclear reactors. ICSBEP lacks benchmarks optimized for zirconium sensitivity to validate zirconium evaluations. Evaluators lack isotopic differential nuclear data in regions of high importance to fission systems.

K-PSO 2.0↗