Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “nitrides”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

The Hardest Superconducting Metal Nitride

Transition–metal (TM) nitrides are a class of compounds with a wide range of properties and applications. Hard superconducting nitrides are of particular interest for electronic applications under working conditions such as coating and high stress (e.g., electromechanical systems). However, most of the known TM nitrides crystallize in the rock–salt structure, a structure that is unfavorable to resist shear strain, and they exhibit relatively low indentation hardness, typically in the range of 10–20 GPa. Here, we report high–pressure synthesis of hexagonal δ–MoN and cubic γ–MoN through an ion–exchange reaction at 3.5 GPa. The final products are in the bulk form with crystallite sizes of 50 – 80 μm. Based on indentation testing on single crystals, hexagonal δ–MoN exhibits excellent hardness of ~30 GPa, which is 30% higher than cubic γ–MoN (~23 GPa) and is so far the hardest among the known metal nitrides. The hardness enhancement in hexagonal phase is attributed to extended covalently bonded Mo–N network than that in cubic phase. The measured superconducting transition temperatures for δ–MoN and cubic γ–MoN are 13.8 and 5.5 K, respectively, in good agreement with previous measurements.

36 MATERIALS SCIENCE↗

Structural evolution and photoluminescence of annealed Si-rich nitride with Si quantum dots prepared by plasma enhanced chemical vapor deposition

Silicon-rich nitride films were deposited by plasma enhanced chemical vapor deposition. Silicon quantum dots (Si QDs) were formed by post-thermal annealing processing verified using the High-Resolution Transmission Electron Microscope. The 1100 °C thermal annealing leads to the nucleation of silicon atoms, the growth of Si QDs, and the rearrangement of Si 2p and N 1s elements. The structural evolution of silicon-rich nitride thin film with post annealing promotes the formation of Si QDs and Si{sub 3}N{sub 4} matrix. We also investigated the effect of the NH{sub 3}-to-SiH{sub 4} ratio R on the photoluminescence (PL) of SiN{sub x} with Si QDs. We found that the broad blue luminescence originates from both quantum confined effect and radiative defects. The intensity of the PL was changed by adjusting the NH{sub 3} flow rate. The increase of R could limit the transformation of Si QDs from amorphous to crystalline status, meanwhile lead to the alteration of distribution of defect states. These can help to understand the annealing-dependent characteristics, the PL mechanisms of silicon-rich nitride and to optimize the fabrication process of Si QDs embedded in nitride.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Intrinsic ferromagnetism in hexagonal boron nitride nanosheets

Understanding the mechanism of ferromagnetism in hexagonal boron nitride nanosheets, which possess only s and p electrons in comparison with normal ferromagnets based on localized d or f electrons, is a current challenge. In this work, we report an experimental finding that the ferromagnetic coupling is an intrinsic property of hexagonal boron nitride nanosheets, which has never been reported before. Moreover, we further confirm it from ab initio calculations. We show that the measured ferromagnetism should be attributed to the localized π states at edges, where the electron-electron interaction plays the role in this ferromagnetic ordering. More importantly, we demonstrate such edge-induced ferromagnetism causes a high Curie temperature well above room temperature. Our systematical work, including experimental measurements and theoretical confirmation, proves that such unusual room temperature ferromagnetism in hexagonal boron nitride nanosheets is edge-dependent, similar to widely reported graphene-based materials. It is believed that this work will open new perspectives for hexagonal boron nitride spintronic devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Boron nitride nanowires synthesis via a simple chemical vapor deposition at 1200 °C

A very simple chemical vapor deposition technique is used to synthesize high quality boron nitride nanowires at 1200 °C within a short growth duration of 30 min. FESEM micrograph shows that the as-synthesized boron nitride nanowires have a clear wire like morphology with diameter in the range of ∼20 to 150 nm. HR-TEM confirmed the wire-like structure of boron nitride nanowires, whereas XPS and Raman spectroscopy are used to find out the elemental composition and phase of the synthesized material. The synthesized boron nitride nanowires have potential applications as a sensing element in solid state neutron detector, neutron capture therapy and microelectronic devices with uniform electronic properties.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Nitride passivation of the interface between high-k dielectrics and SiGe

In-situ direct ammonia (NH{sub 3}) plasma nitridation has been used to passivate the Al{sub 2}O{sub 3}/SiGe interfaces with Si nitride and oxynitride. X-ray photoelectron spectroscopy of the buried Al{sub 2}O{sub 3}/SiGe interface shows that NH{sub 3} plasma pre-treatment should be performed at high temperatures (300 °C) to fully prevent Ge nitride and oxynitride formation at the interface and Ge out-diffusion into the oxide. C-V and I-V spectroscopy results show a lower density of interface traps and smaller gate leakage for samples with plasma nitridation at 300 °C.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Anomalous thermal conductivity of monolayer boron nitride

In this paper, we use nonequilibrium molecular dynamics modeling to investigate the thermal properties of monolayer hexagonal boron nitride nanoribbons under uniaxial strain along their longitudinal axis. Our simulations predict that hexagonal boron nitride shows an anomalous thermal response to the applied uniaxial strain. Contrary to three dimensional materials, under uniaxial stretching, the thermal conductivity of boron nitride nanoribbons first increases rather than decreasing until it reaches its peak value and then starts decreasing. Under compressive strain, the thermal conductivity of monolayer boron nitride ribbons monolithically reduces rather than increasing. We use phonon spectrum and dispersion curves to investigate the mechanism responsible for the unexpected behavior. Our molecular dynamics modeling and density functional theory results show that application of longitudinal tensile strain leads to the reduction of the group velocities of longitudinal and transverse acoustic modes. Such a phonon softening mechanism acts to reduce the thermal conductivity of the nanoribbons. On the other hand, a significant increase in the group velocity (stiffening) of the flexural acoustic modes is observed, which counteracts the phonon softening effects of the longitudinal and transverse modes. The total thermal conductivity of the ribbons is a result of competition between these two mechanisms. At low tensile strain, the stiffening mechanism overcomes the softening mechanism which leads to an increase in the thermal conductivity. At higher tensile strain, the softening mechanism supersedes the stiffening and the thermal conductivity slightly reduces. Our simulations show that the decrease in the thermal conductivity under compressive strain is attributed to the formation of buckling defects which reduces the phonon mean free path.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Epitaxial integration of superconducting nitrides with cubic GaN

Epitaxial combination of transition metal nitrides and group III-nitrides holds significant potential for novel device architectures, given their wide array of properties and similar lattice constants. However, the mixture of hexagonal and cubic crystals limits structural quality and has stymied development. This work will discuss the molecular beam epitaxy synthesis of metastable cubic GaN on 3C-SiC templates and its integration with cubic ZrN and NbN superconductors in single and multilayer heterostructures. The fully cubic nature of GaN and the epitaxial nature of all layers are confirmed via in situ and ex situ techniques. The electrical transport properties of transition metal nitrides on cubic GaN (001) are compared to those grown directly on 3C-SiC (001) and c-plane hexagonal GaN templates. The determination of a similar growth window for cubic wide-bandgap and superconducting metal nitrides creates a platform for new epitaxial device architectures and potential applications in metamaterials, quantum information science, and condensed matter physics.

Condensed matter physics↗

Compressibilities and phonon spectra of high-hardness transition metal-nitride materials

We report compressibilities measured by synchrotron X-ray diffraction and phonon spectra from Raman scattering at high pressure in the diamond anvil cell (DAC) for cubic transition metal nitrides TiN{sub 1-x}, {gamma}-Mo{sub 2}N and VN{sub x}. The high-hardness metal nitride compounds have large values of the bulk modulus. B1-structured nitrides normally have no allowed first-order Raman spectra. However, they exhibit broad bands that reflect the vibrational density of states g({omega}) associated with breakdown of q=0 selection rules because of the presence of N{sup 3-} vacancies on anion sites. Peaks in g({omega}) at low frequency are identified with the longitudinal and transverse acoustic (TA) branches. The maximum in the TA band is correlated with the superconducting transition temperature in these materials (T{sub c}). In situ Raman scattering measurements in the DAC thus permit predictions of the T{sub c} variation with pressure for cubic nitrides and isostructural carbide materials.

43 PARTICLE ACCELERATORS↗

Review of high-throughput approaches to search for piezoelectric nitrides

Piezoelectric materials are commonplace in modern devices, and the prevalence of these materials is poised to increase in the years to come. The majority of known piezoelectrics are oxide materials, due in part to the related themes of a legacy of ceramists building off of mineralogical crystallography and the relative simplicity of fabricating oxide specimens. However, diversification beyond oxides offers exciting opportunities to identify and develop new materials perhaps better suited for certain applications. Aluminum nitride (and recently, its Sc-modified derivative) is the only commercially integrated piezoelectric nitride in use today, although this is likely to change in the near future with increased use of high-throughput techniques for materials discovery and development. This review covers modern methods—both computational and experimental—that have been developed to explore chemical space for new materials with targeted characteristics. Here, the authors focus on the application of computational and high-throughput experimental approaches to discovering and optimizing piezoelectric nitride materials. While the focus of this review is on the search for and development of new piezoelectric nitrides, most of the research approaches discussed in this article are both chemistry- and application-agnostic.

36 MATERIALS SCIENCE↗

Synthesis of LaWN 3 nitride perovskite with polar symmetry

Perovskite structured materials have a variety of uses as photovoltaics, capacitors, and micromechanical actuators, along with other applications. Oxides, halides, and chalcogenides all have large numbers of perovskite structured materials. Examples of perovskite nitrides are conspicuously absent, but Talley et al managed to synthesize one (see the Perspective by Hong). Lanthanum tungsten nitride in the perovskite structure turns out to be piezoelectric, which is ideal for a variety of applications. Perovskite structured nitrides are very attractive because they could easily integrate with the large number of nitride-based semiconducting devices already in use.

36 MATERIALS SCIENCE↗

ZrN Phase Formation, Hardening and Nitrogen Diffusion Kinetics in Plasma Nitrided Zircaloy-4

Plasma nitridation was conducted to modify the surfaces of Zircaloy-4. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), and Raman analysis were used to characterize microstructures and phases. Surface indentation and cross-sectional indentation were performed to evaluate mechanical property changes. Nitridation forms a thin layer of ZrN phase, followed by a much deeper layer affected by nitrogen diffusion. The ZrN phase is confirmed by both TEM and Raman characterization. The Raman peaks of ZrN phase show a temperature dependence. The intensity increases with increasing nitridation temperatures, reaches a maximum at 700 °C, and then decreases at higher temperatures. The ZrN layer appears as continuous small columnar grains. The surface polycrystalline ZrN phase is harder than the bulk by a factor of ~8, and the nitrogen diffusion layer is harder by a factor of ~2–5. The activation energy of nitrogen diffusion was measured to be 2.88 eV. The thickness of the nitrogen-hardened layer is controllable by changing the nitridation temperature and duration.

36 MATERIALS SCIENCE↗

Tin Nitride Atomic Layer Deposition Using N2H4

There is substantial lag in the development of atomic layer deposition (ALD) processes for nitrides compared to the high-quality, conformal oxides for which ALD has become the standard. A major factor in this disparity is the ready availability of highly reactive oxygen sources (mainly H2O, O2, and H2O2). High-energy nitrogen precursors are similarly required for the efficient incorporation of nitrogen in a film. Ammonia has often been used in conjunction with metal chlorides but requires relatively high temperatures for thermal ALD. Plasma-enhanced ALD can utilize molecular nitrogen as a precursor but can reduce film conformality on complex supports and damage the underlying substrate. Hydrazine (N2H4) is an alternative precursor which has been rarely explored for the fabrication of nitrides in ALD, but which is experiencing a surge in popularity due to its high reactivity, which enables the deposition of nitrides as-yet undemonstrated by ALD.(1) The added reactivity and volatility of liquid hydrazine may enable new reaction mechanisms, lower deposition temperatures, and conformality for high aspect ratio applications. Sn3N4 is a metastable semiconductor which shares a crystal structure with its analog, Si3N4; unlike Si3N4, Sn3N4 has only recently been grown by ALD,(2) being synthesized much more often through reactive sputtering.(3) As a binary, Sn3N4 has applications as a battery anode material, for photoelectrochemistry, and optoelectronic devices. We will report progress on the deposition of SnxNy films from tetrakis(dimethylamido) tin (TDMASn) and N2H4. Growth per cycle of this material (determined by x-ray reflectivity) is 0.4 A at 200 C, similar to the sole report of Sn3N4 from PE-ALD,(2) despite films being substantially Sn-rich. Identification of ALD growth window and self-limiting deposition characteristics are underway; initial testing indicates a competing chemical vapor deposition process which can be eliminated with adequate tuning of pulse/purge characteristics. A comparison of film conductivity and optical absorption at different growth temperatures will be presented. General issues of N2H4 purity and routes to prevent or control oxynitride formation will be discussed. (1) Du, L., et al. The First Atomic Layer Deposition Process for FexN Films. Chem. Comm., 2019, ASAP. DOI: 10.1039/C8CC10175B. (2) Stewart, D. M., et al. Tin Oxynitride Anodes by Atomic Layer Deposition for Solid-State Batteries. Chem. Mater. 2018, 30, 2526-34. (3) Caskey, C. M., et al. Semiconducting Properties of Spinel Tin Nitride and Other IV3N4 Polymorphs. J. Mater. Chem. C 2015, 3, 1389-96.

14 SOLAR ENERGY↗

Growth of group III nitride films by pulsed electron beam deposition

We have grown group III nitride films on Al{sub 2}O{sub 3} (0 0 0 1), 6H-SiC (0 0 0 1), and ZnO (0001-bar) substrates by pulsed electron beam deposition (PED) for the first time and investigated their characteristics. We found that c-plane AlN and GaN grow epitaxially on these substrates. It has been revealed that the growth of GaN on atomically flat 6H-SiC substrates starts with the three-dimensional mode and eventually changes into the two-dimensional mode. The GaN films exhibited strong near-band-edge emission in their room temperature photoluminescence spectra. We also found that the use of PED allows us to reduce the epitaxial growth temperature for GaN down to 200 deg. C. - Graphical abstract: We have grown group III nitride films by pulsed electron beam deposition (PED) and found that the films of group III nitrides grow epitaxially on 6H-SiC and Al{sub 2}O{sub 3} substrates. We also found that the use of PED allows us to reduce the epitaxial growth temperature for GaN down to 200 deg. C.

36 MATERIALS SCIENCE↗

Synthesis and characterization of nitrides of iridium and palladiums

We describe the synthesis of nitrides of iridium and palladium using the laser-heated diamond anvil cell. We have used the in situ techniques of x-ray powder diffraction and Raman scattering to characterize these compounds and have compared our experimental findings where possible to the results of first-principles theoretical calculations. We suggest that palladium nitride is isostructural with pyrite, while iridium nitride has a monoclinic symmetry and is isostructural with baddeleyite.

36 MATERIALS SCIENCE↗

Transition‐Metal Nitride Core@Noble‐Metal Shell Nanoparticles as Highly CO Tolerant Catalysts

Abstract Core–shell architectures offer an effective way to tune and enhance the properties of noble‐metal catalysts. Herein, we demonstrate the synthesis of Pt shell on titanium tungsten nitride core nanoparticles (Pt/TiWN) by high temperature ammonia nitridation of a parent core–shell carbide material (Pt/TiWC). X‐ray photoelectron spectroscopy revealed significant core‐level shifts for Pt shells supported on TiWN cores, corresponding to increased stabilization of the Pt valence d‐states. The modulation of the electronic structure of the Pt shell by the nitride core translated into enhanced CO tolerance during hydrogen electrooxidation in the presence of CO. The ability to control shell coverage and vary the heterometallic composition of the shell and nitride core opens up attractive opportunities to synthesize a broad range of new materials with tunable catalytic properties.

Garg, Aaron↗

Wear and Corrosion Resistances of Active Screen Plasma-Nitrided Duplex Stainless Steels

Two grades of duplex stainless steel, SAF 2205 and SAF 2507, were nitrided using an active screen plasma process carried out at 380 °C for 10 h and were characterized in terms of microstructure and hardness. Wear resistance was assessed by means of linear scratch tests, using loads below and above the critical load. Potentiodynamic polarization was used to analyze corrosion behavior in 0.6 M NaCl solution. X-ray diffractometry showed expanded austenite formation in all nitrided samples. The super duplex steel SAF 2507 showed much better scratch resistance, with low friction coefficient and greater toughness, as judged by the pattern of superficial cracks when it was tested above the critical load. The corrosion behavior of steels was also different, mainly in the active region, and nitriding had a more beneficial effect upon SAF 2507. The potential relative to the transpassive region was practically unaffected by the nitriding.

36 MATERIALS SCIENCE↗

Reactive spark plasma sintering (SPS) of nitride reinforced titanium alloy composites

Coupled in situ alloying and nitridation of titanium–vanadium alloys, has been achieved by introducing reactive nitrogen gas during the spark plasma sintering (SPS) of blended titanium and vanadium elemental powders, leading to a new class of nitride reinforced titanium alloy composites. The resulting microstructure includes precipitates of the d-TiN phase with the NaCl structure, equiaxed (or globular) precipitates of a nitrogen enriched hcp a(Ti,N) phase with a c/a ratio more than what is expected for pure hcp Ti, and fine scale plate-shaped precipitates of hcp a-Ti, distributed within a bcc b matrix. During SPS processing, the d-TiN phase appears to form at a temperature of 1400 C, while only hcp a(Ti,N) and a-Ti phases form at lower processing temperatures. Consequently, the highest microhardness is exhibited by the composite processed at 1400 C while those processed at 1300 C or below exhibit lower values. Processing at temperatures below 1300 C, resulted in an incomplete alloying of the blend of titanium and vanadium powders. These d-TiN precipitates act as heterogeneous nucleation sites for the a(Ti,N) precipitates that appear to engulf and exhibit an orientation relationship with the nitride phase at the center. Furthermore, fine scale a-Ti plates are precipitated within the nitride precipitates, presumably resulting from the retrograde solubility of nitrogen in titanium.

metal-matrix composites↗

Characterization of multilayer nitride coatings by electron microscopy and modulus mapping

This paper discusses multi-scale characterization of physical vapour deposited multilayer nitride coatings using a combination of electron microscopy and modulus mapping. Multilayer coatings with a triple layer structure based on TiAlN and nanocomposite nitrides with a nano-multilayered architecture were deposited by Cathodic arc deposition and detailed microstructural studies were carried out employing Energy Dispersive Spectroscopy, Electron Backscattered Diffraction, Focused Ion Beam and Cross sectional Transmission Electron Microscopy in order to identify the different phases and to study microstructural features of the various layers formed as a result of the deposition process. Modulus mapping was also performed to study the effect of varying composition on the moduli of the nano-multilayers within the triple layer coating by using a Scanning Probe Microscopy based technique. To the best of our knowledge, this is the first attempt on modulus mapping of cathodic arc deposited nitride multilayer coatings. This work demonstrates the application of Scanning Probe Microscopy based modulus mapping and electron microscopy for the study of coating properties and their relation to composition and microstructure. - Highlights: • Microstructure of a triple layer nitride coating studied at multiple length scales. • Phases identified by EDS, EBSD and SAED (TEM). • Nanolayered, nanocomposite structure of the coating studied using FIB and TEM. • Modulus mapping identified moduli variation even in a nani-multilayer architecture.

36 MATERIALS SCIENCE↗