Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “mesoscale modeling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
NASA NTRS1999

Mesoscale Simulations of a Florida Sea Breeze Using the PLACE Land Surface Model Coupled to a 1.5-Order Turbulence Parameterization

A sophisticated land-surface model, PLACE, the Parameterization for Land Atmospheric Convective Exchange, has been coupled to a 1.5-order turbulent kinetic energy (TKE) turbulence sub-model. Both have been incorporated into the Penn State/National Center for Atmospheric Research (PSU/NCAR) mesoscale model MM5. Such model improvements should have their greatest effect in conditions where surface contrasts dominate over dynamic processes, such as the simulation of warm-season, convective events. A validation study used the newly coupled model, MM5 TKE-PLACE, to simulate the evolution of Florida sea-breeze moist convection during the Convection and Precipitation Electrification Experiment (CaPE). Overall, eight simulations tested the sensitivity of the MM5 model to combinations of the new and default model physics, and initialization of soil moisture and temperature. The TKE-PLACE model produced more realistic surface sensible heat flux, lower biases for surface variables, more realistic rainfall, and cloud cover than the default model. Of the 8 simulations with different factors (i.e., model physics or initialization), TKE-PLACE compared very well when each simulation was ranked in terms of biases of the surface variables and rainfall, and percent and root mean square of cloud cover. A factor separation analysis showed that a successful simulation required the inclusion of a multi-layered, land surface soil vegetation model, realistic initial soil moisture, and higher order closure of the planetary boundary layer (PBL). These were needed to realistically model the effect of individual, joint, and synergistic contributions from the land surface and PBL on the CAPE sea-breeze, Lake Okeechobee lake breeze, and moist convection.

Lynn, Barry H.↗
NASA NTRS1998

The Use of Indirect Estimates of Soil Moisture to Initialize Coupled Models and its Impact on Short-Term and Seasonal Simulations

It is well known that soil moisture is a characteristic of the land surface that strongly affects the partitioning of outgoing radiation into sensible and latent heat which significantly impacts both weather and climate. Detailed land surface schemes are now being coupled to mesoscale atmospheric models in order to represent the effect of soil moisture upon atmospheric simulations. However, there is little direct soil moisture data available to initialize these models on regional to continental scales. As a result, a Soil Hydrology Model (SHM) is currently being used to generate an indirect estimate of the soil moisture conditions over the continental United States at a grid resolution of 36 Km on a daily basis since 8 May 1995. The SHM is forced by analyses of atmospheric observations including precipitation and contains detailed information on slope soil and landcover characteristics.The purpose of this paper is to evaluate the utility of initializing a detailed coupled model with the soil moisture data produced by SHM.

Lapenta, William M.↗
NASA NTRS2005

Urban Landscape Characterization Using Remote Sensing Data For Input into Air Quality Modeling

The urban landscape is inherently complex and this complexity is not adequately captured in air quality models that are used to assess whether urban areas are in attainment of EPA air quality standards, particularly for ground level ozone. This inadequacy of air quality models to sufficiently respond to the heterogeneous nature of the urban landscape can impact how well these models predict ozone pollutant levels over metropolitan areas and ultimately, whether cities exceed EPA ozone air quality standards. We are exploring the utility of high-resolution remote sensing data and urban growth projections as improved inputs to meteorological and air quality models focusing on the Atlanta, Georgia metropolitan area as a case study. The National Land Cover Dataset at 30m resolution is being used as the land use/land cover input and aggregated to the 4km scale for the MM5 mesoscale meteorological model and the Community Multiscale Air Quality (CMAQ) modeling schemes. Use of these data have been found to better characterize low density/suburban development as compared with USGS 1 km land use/land cover data that have traditionally been used in modeling. Air quality prediction for future scenarios to 2030 is being facilitated by land use projections using a spatial growth model. Land use projections were developed using the 2030 Regional Transportation Plan developed by the Atlanta Regional Commission. This allows the State Environmental Protection agency to evaluate how these transportation plans will affect future air quality.

Quattrochi, Dale A.↗
NASA NTRS2007

A Numerical Study of the Urban Heat Island in the Coastal Tropical City of San Juan, Puerto Rico: Model Validation and Impacts of LCLU Changes

Urban sprawls in tropical locations are rapidly accelerating and it is more evident in islands where a large percentage of the population resides along the coasts. This paper focuses on the analysis of the impacts of land use and land cover for urbanization in the tropical coastal city of San Juan, in the tropical island of Puerto Rico. A mesoscale numerical model, the Regional Atmospheric Modeling System (RAMS), is used to study specific characteristics and patterns of the urban heat island in the San Juan Metropolitan Area (SJMA), the most noticeable urban core of the Caribbean. The research present in this paper makes use of the observations obtained during the airborne San Juan Atlas Mission in two ways. First, surface and rawinsonde data are used to validate the atmospheric model yielding satisfactory results. Second, airborne remote sensing information is used to update the model's surface characteristics to obtain a detailed configuration of the SJMA in order to perform the LCLU changes impact analysis. This analysis showed that the presence of San Juan has an impact reflected in higher air temperatures over the area occupied by the city, with positive values of up to 2.5 C, for the simulations that have specified urban LCLU indexes in the bottom boundary. One interesting result of the impact analysis was the finding of a precipitation disturbance shown as a difference in total accumulated rainfall between simulation with the city and with a potential natural vegetation induced by the presence of the urban area. Model results indicate that the urban-induced cloud formation and precipitation development occur mainly downwind of the city, including the accumulated precipitation. This spatial pattern can be explained by the presence of a-larger urbanized area in the southwest sector of the city, and of the approaching northeasterly trade winds.

Comarazamy, Daniel E.↗
NASA NTRS1993

Measurement and modeling of moist processes

The keynote talk summarized five years of work simulating observed mesoscale convective systems with the RAMS (Regional Atmospheric Modeling System) model. Excellent results are obtained when simulating squall line or other convective systems that are strongly forced by fronts or other lifting mechanisms. Less highly forced systems are difficult to model. The next topic in this colloquium was measurement of water vapor and other constituents of the hydrologic cycle. Impressive accuracy was shown measuring water vapor with both the airborne DIAL (Differential Absorption Lidar) system and the the ground-based Raman Lidar. NMC's plans for initializing land water hydrology in mesoscale models was presented before water vapor measurement concepts for GCIP were discussed. The subject of using satellite data to provide mesoscale moisture and wind analyses was next. Recent activities in modeling of moist processes in mesoscale systems was reported on. These modeling activities at the Canadian Atmospheric Environment Service (AES) used a hydrostatic, variable-resolution grid model. Next the spatial resolution effects of moisture budgets was discussed; in particular, the effects of temporal resolution on heat and moisture budgets for cumulus parameterization. The conclusion of this colloquium was on modeling scale interaction processes.

Cotton, William↗
NASA NTRS2006

Spatial Growth Modeling and High Resolution Remote Sensing Data Coupled with Air Quality Modeling to Assess the Impact of Atlanta, Georgia on the Local and Regional Environment

The growth of cities, both in population and areal extent, appears as an inexorable process. Urbanization continues at a rapid rate, and it is estimated that by the year 2025, 60 percent of the world s population will live in cities. Urban expansion has profound impacts on a host of biophysical, environmental, and atmospheric processes within an urban ecosystems perspective. A reduction in air quality over cities is a major result of these impacts. Because of its complexity, the urban landscape is not adequately captured in air quality models such as the Community Multiscale Air Quality (CMAQ) model that is used to assess whether urban areas are in attainment of EPA air quality standards, primarily for ground level ozone. This inadequacy of the CMAQ model to sufficiently respond to the heterogeneous nature of the urban landscape can impact how well the model predicts ozone levels over metropolitan areas and ultimately, whether cities exceed EPA ozone air quality standards. We are exploring the utility of high-resolution remote sensing data and urban spatial growth modeling (SGM) projections as improved inputs to a meteorological/air quality modeling system focusing on the Atlanta, Georgia metropolitan area as a case study. These growth projections include business as usual and smart growth scenarios out to 2030. The growth projections illustrate the effects of employing urban heat island mitigation strategies, such as increasing tree canopy and albedo across the Atlanta metro area, which in turn, are used to model how air temperature can potentially be moderated as impacts on elevating ground-level ozone, as opposed to not utilizing heat island mitigation strategies. The National Land Cover Dataset at 30m resolution is being used as the land use/land cover input and aggregated to the 4km scale for the MM5 mesoscale meteorological model and the CMAQ modeling schemes. Use of these data has been found to better characterize low density/suburban development as compared with USGS lkm land use/land cover data that have traditionally been used in modeling. Air quality prediction for future scenarios to 2030 is being facilitated by land use projections using a spatial growth model. Land use projections were developed using the 2030 Regional Transportation Plan developed by the Atlanta Regional Commission, the regional planning agency for the area. This allows the Georgia Environmental Protection Division to evaluate how these transportation plans will affect future air quality. The coupled SGM and air quality modeling approach provides insight on what the impacts of Atlanta s growth will be on the local and regional environment and exists as a mechanism that can be used by policy makers to make rational decisions on urban growth and sustainability for the metropolitan area in the future.

Quattrochi, Dale A.↗
NASA NTRS2006

Remote Sensing and Spatial Growth Modeling Coupled with Air Quality Modeling to Assess the Impact of Atlanta, Georgia on the Local and Regional Environment

The growth of cities, both in population and areal extent, appears as an inexorable process. Urbanization continues at a rapid rate, and it is estimated that by the year 2025, 80 percent of the world s population will live in cities. Directly aligned with the expansion of cities is urban sprawl. Urban expansion has profound impacts on a host of biophysical, environmental, and atmospheric processes. A reduction in air quality over cities is a major result of these impacts. Strategies that can be directly or indirectly implemented to help remediate air quality problems in cities and that can be accepted by political decision makers and the general public are now being explored to help bring down air pollutants and improve air quality. The urban landscape is inherently complex and this complexity is not adequately captured in air quality models, particularly the Community Multiscale Air Quality (CMAQ) model that is used to assess whether urban areas are in attainment of EPA air quality standards, primarily for ground level ozone. This inadequacy of the CMAQ model to sufficiently respond to the heterogeneous nature of the urban landscape can impact how well the model predicts ozone pollutant levels over metropolitan areas and ultimately, whether cities exceed EPA ozone air quality standards. We are exploring the utility of high-resolution remote sensing data and urban spatial growth modeling (SGM) projections as improved inputs to the meteorology component of the CMAQ model focusing on the Atlanta, Georgia metropolitan area as a case study. These growth projections include "business as usual" and "smart growth" scenarios out to 2030. The growth projections illustrate the effects of employing urban heat island mitigation strategies, such as increasing tree canopy and albedo across the Atlanta metro area, which in turn, are used to model how ozone and air temperature can potentially be moderated as impacts on elevating ground-level ozone, as opposed to not utilizing heat island mitigation strategies. The National Land Cover Dataset at 30m resolution is being used as the land use/land cover input and aggregated to the 4km scale for the MM5 mesoscale meteorological model and the (CMAQ) modeling schemes. Use of these data have been found to better characterize low density/suburban development as compared with USGS 1km land use/land cover data that have traditionally been used in modeling. Air quality prediction for future scenarios to 2030 is being facilitated by land use projections using a spatial growth model. Land use projections were developed using the 2030 Regional Transportation Plan developed by the Atlanta Regional Commission, the regional planning agency for the area. This allows the State Environmental Protection agency to evaluate how these transportation plans will affect future air quality. The coupled SGM and air quality modeling approach provides insight on what the impacts of Atlanta s growth will be on the local and regional environment and exists as a mechanism that can be used by policy makers to make rationale decisions on urban growth and sustainability for the metropolitan area in the future.

Quattrochi, Dale A.↗
NASA NTRS1988

Color graphics workstations used for simultaneous display of satellite and model data sets

Model-measurement display methods for studying actual or synthetic satellite measurements of cloudiness are developed. Visualization and animation techniques are employed to analyze the data. Two types of animation sequences, one based on Insat IR geosynchronous satellite imagery combined with upper level velocity potentials calculations and isoline depictions of the high amplitude centers of low frequency cloudiness activity, and the other combines a mesoscale cloud model simulation of a severe hail storm and synthetic microwave radiation signatures, are described.

Cooper, Harry J.↗
NASA NTRS2009

Alternative Representations of Convective Processes in the NASA GEOS-5 AGCM

The gap in explicit resolution of phenomena between global climate models and cloud resolving models is shrinking at a steady pace with global integrations of several km in resolution now practical for at least some time scales. In moving toward finer resolution the long standing problem of convective parameterization is being examined along with the assumption of convective quasi-equilibrium and how this can be reconciled with the stochastic and intermittent nature of convection. In this context we examine the nature of parameterized convection in the NASA Goddard Earth Observing System (GEOS-5) Atmospheric General Circulation Model. Our analysis uses both coarse (2.5 degree) and fine scale 0.25 degree spatial resolution integrations. Two basic formulations are compared: the default option is the Relaxed Arakawa-Schubert (RAS) scheme which invokes a sequence of linearly entraining plumes and quasi-equilibrium closure. An optional modification of this method (the "Stochastic Tokioka" constraint) places a random lower limit on plume entrainment. An alternative representation is the Kain-Fritsch parameterization which was originally developed for mesoscale numerical modeling strategies. Here entrainment is determined by a crude buoyancy sorting approach that allows the plume spectrum to be more responsive to ambient vertical stratification of moisture. Diagnostics of the model behavior are referenced to recent observational evidence of continuous phase transition behavior. In particular we examine the relationship between column water vapor and probablility of convective presence and intensity. Sensitivity of the statistics of convective behavior to parcel mixing/entrainment formulations and parcel initial thermodynamics are considered. Observational statistics from A-Train and TRMM sensors provide validation of the model integrations.

Robertson, Franklin↗
NASA NTRS1999

The Dependence on Grid Resolution of Numerically Simulated Convective Cloud Systems Using Ice Microphysics

Mesoscale research and forecast models are increasingly being used at horizontal resolutions of 1-8 km to simulate a variety of precipitating systems. When the model is used to simulate convective systems, it is uncertain to what extent the dynamics and microphysics of convective updrafts can be resolved with grids larger than 1 km. In this study, two- and three-dimensional versions of the Goddard Cumulus Ensemble model are used to determine the impact of horizontal grid resolution on the behavior of the simulated storms and on the characteristics of the cloud microphysical fields. It will be shown that as resolution decreases from about 1 km to greater than 3 km, there is a fairly rapid degradation of the storm structure in the form of reduced convective mass fluxes, updraft tilts, and cloud microphysics. A high-resolution simulation of hurricane outer rainbands using the MM5 mesoscale model shows also that there can be a substantial modification of the key microphysical processes that contribute to rainfall as a result of reducing the horizontal resolution.

Braun, Scott A.↗
NASA NTRS2005

Remote Sensing Characterization of the Urban Landscape for Improvement of Air Quality Modeling

The urban landscape is inherently complex and this complexity is not adequately captured in air quality models, particularly the Community Multiscale Air Quality (CMAQ) model that is used to assess whether urban areas are in attainment of EPA air quality standards, primarily for ground level ozone. This inadequacy of the CMAQ model to sufficiently respond to the heterogeneous nature of the urban landscape can impact how well the model predicts ozone pollutant levels over metropolitan areas and ultimately, whether cities exceed EPA ozone air quality standards. We are exploring the utility of high-resolution remote sensing data and urban growth projections as improved inputs to the meteorology component of the CMAQ model focusing on the Atlanta, Georgia metropolitan area as a case study. These growth projections include "business as usual" and "smart growth" scenarios out to 2030. The growth projections illustrate the effects of employing urban heat island mitigation strategies, such as increasing tree canopy and albedo across the Atlanta metro area, in moderating ground-level ozone and air temperature, compared to "business as usual" simulations in which heat island mitigation strategies are not applied. The National Land Cover Dataset at 30m resolution is being used as the land use/land cover input and aggregated to the 4km scale for the MM5 mesoscale meteorological model and the (CMAQ) modeling schemes. Use of these data has been found to better characterize low densityhburban development as compared with USGS 1 km land use/land cover data that have traditionally been used in modeling. Air quality prediction for fiture scenarios to 2030 is being facilitated by land use projections using a spatial growth model. Land use projections were developed using the 2030 Regional Transportation Plan developed by the Atlanta Regional Commission, the regional planning agency for the area. This allows the state Environmental Protection agency to evaluate how these transportation plans will affect fbture air quality.

Quattrochi, Dale A.↗
NASA NTRS1994

Data assimilation and model evaluation experiment datasets

The Institute for Naval Oceanography, in cooperation with Naval Research Laboratories and universities, executed the Data Assimilation and Model Evaluation Experiment (DAMEE) for the Gulf Stream region during fiscal years 1991-1993. Enormous effort has gone into the preparation of several high-quality and consistent datasets for model initialization and verification. This paper describes the preparation process, the temporal and spatial scopes, the contents, the structure, etc., of these datasets. The goal of DAMEE and the need of data for the four phases of experiment are briefly stated. The preparation of DAMEE datasets consisted of a series of processes: (1) collection of observational data; (2) analysis and interpretation; (3) interpolation using the Optimum Thermal Interpolation System package; (4) quality control and re-analysis; and (5) data archiving and software documentation. The data products from these processes included a time series of 3D fields of temperature and salinity, 2D fields of surface dynamic height and mixed-layer depth, analysis of the Gulf Stream and rings system, and bathythermograph profiles. To date, these are the most detailed and high-quality data for mesoscale ocean modeling, data assimilation, and forecasting research. Feedback from ocean modeling groups who tested this data was incorporated into its refinement. Suggestions for DAMEE data usages include (1) ocean modeling and data assimilation studies, (2) diagnosis and theoretical studies, and (3) comparisons with locally detailed observations.

Lai, Chung-Cheng A.↗
NASA NTRS2014

Introducing Multisensor Satellite Radiance-Based Evaluation for Regional Earth System Modeling

Earth System modeling has become more complex, and its evaluation using satellite data has also become more difficult due to model and data diversity. Therefore, the fundamental methodology of using satellite direct measurements with instrumental simulators should be addressed especially for modeling community members lacking a solid background of radiative transfer and scattering theory. This manuscript introduces principles of multisatellite, multisensor radiance-based evaluation methods for a fully coupled regional Earth System model: NASA-Unified Weather Research and Forecasting (NU-WRF) model. We use a NU-WRF case study simulation over West Africa as an example of evaluating aerosol-cloud-precipitation-land processes with various satellite observations. NU-WRF-simulated geophysical parameters are converted to the satellite-observable raw radiance and backscatter under nearly consistent physics assumptions via the multisensor satellite simulator, the Goddard Satellite Data Simulator Unit. We present varied examples of simple yet robust methods that characterize forecast errors and model physics biases through the spatial and statistical interpretation of various satellite raw signals: infrared brightness temperature (Tb) for surface skin temperature and cloud top temperature, microwave Tb for precipitation ice and surface flooding, and radar and lidar backscatter for aerosol-cloud profiling simultaneously. Because raw satellite signals integrate many sources of geophysical information, we demonstrate user-defined thresholds and a simple statistical process to facilitate evaluations, including the infrared-microwave-based cloud types and lidar/radar-based profile classifications.

Planetary Boundary Layer↗
NASA NTRS2018

Comparisons of Bin and Bulk Microphysics Schemes in Simulations of Topographic Winter Precipitation with Radar and Radiometer Measurements

The Hebrew University Cloud Model (HUCM) bin scheme and the Thompson bulk scheme in the Weather Research and Forecasting (WRF) model are compared to assess biases often found in simulated brightness temperature and radar reflectivity. Compared to our preceding study that evaluated several bulk schemes in the WRF model, the current study obtains a reduction of the bias from excessive microwave scattering by precipitation ice for both HUCM bin and the Thompson bulk microphysics schemes for a topographic winter precipitation event associated with an atmospheric river. The Thompson particle size distributions (PSDs) and snow particle density assumption are implemented into the Goddard Satellite Data Simulator Unit (G‐SDSU) and have produced improvements. Despite the greater sophistication of the bin scheme in representing cloud and precipitation processes, the simulation with the Thompson bulk scheme is generally in better agreement with observations for this winter event. The explicitly resolved hydrometeor PSDs in HUCM enable analysis of mass spectra variations in response to changes in microphysics assumptions. Two HUCM sensitivity runs tested the enhancement of snow particle breakup and the influence of ice nuclei (IN) concentration. Higher IN concentration resulted in increased snow mass and broadened the spectrum toward small‐size particles. Modified snow mass spectra and resultant changes in graupel contributed to modifications in scattering and reflectivity simulations. The article demonstrates the bin scheme's capability to provide a new means to improve our understanding of uncertainties in mesoscale weather models and radiative transfer models.

microwave remote sensing↗
NASA NTRS1979

Meteorological data-processing package

METPAK, meteorological data-processing package of satellite data used to develop cloud-tracking maps, is given. Data can develop and enhance numerical prediction models for mesoscale phenomena and improve ability to detect and predict storms.

Billingsly, J. B.↗
NASA NTRS1981

Hydrologic forecasting requirements for precipitation data from space measurements

The needs for precipitation information in severe storms research and in the operational detection and forecasting of such phenomena are described. The discussion will include thunderstorms, tropical cyclones, and regional and mesoscale numerical models used to analyze and forecast these and other regional scale phenomena.

Hudlow, M. D.↗
NASA NTRS1985

Sea breeze-induced mesoscale systems and severe weather

The relationship between thunderstorm activity during the summer months along coastal regions of the Atlantic and Gulf coasts and the dry sea breeze circulation was investigated. Satellite composites of thunderstorm activity for synoptically undisturbed conditions have been obtained for south Florida for a series of days in the summer of 1983. These data were catalogued into different low level synoptic flow regimes. Five synoptic flow regimes were found from the data. A three-dimensional mesoscale numerical model was used for each sysnoptic flow regime to quantitatively predict the location of enhanced thunderstorm activity. This model includes a parameterization of vegetation and soil moisture feedbacks as well as a sophisticated planetary boundary layer representation. Using the results of the satellite image composites, spatial and temporal characteristics of deep convective cloud patterns and their variation with synoptic flow are described. The results from the numerical model have provided explanations for the observed patterns.

Pielke, R. A.↗