Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “mesoporous”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

Nitrogen-Doped Mesoporous Carbon for Carbon Capture A Molecular Simulation Study

Using molecular simulation, we investigate the effect of nitrogen doping on adsorption capacity and selectivity of CO{sub 2} versus N{sub 2} in model mesoporous carbon. We show that nitrogen doping greatly enhances CO{sub 2} adsorption capacity; with a 7 wt % dopant concentration, the adsorption capacity at 1 bar and 298 K increases from 3 to 12 mmol/g (or 48% uptake by weight). This great enhancement is due to the preferred interaction between CO{sub 2} and the electronegative nitrogen. The nitrogen doping coupled with the mesoporosity also leads to a much higher working capacity for adsorption of the CO{sub 2}/N{sub 2} mixture in nitrogen-doped mesoporous carbon. In addition, the CO{sub 2}/N{sub 2} selectivity is almost 5 times greater than in nondoped carbon at ambient conditions. This work indicates that nitrogen doping is a promising strategy to create mesoporous carbons for high-capacity, selective carbon capture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Probing Porosity and Pore Interconnectivity in Crystalline Mesoporous TiO2 Using Hyperpolarized Xe-129 NMR

Hyperpolarized (HP) 129Xe NMR was used to probe the porosity and interconnectivity of pores in crystalline mesoporous TiO2. We have demonstrated that HP 129Xe NMR can be used to differentiate between similar sized pores within different crystalline phases. Pores of 4 nm size resident in mixed anatase and rutile mesoporous TiO2 phases were identified. Complementary to other techniques, HP 129Xe NMR is able to probe the interconnectivity between pores present in these different phases. The cross peaks in 2D exchange (EXSY) NMR spectra between the signals of xenon in two types of pores on millisecond time scale are clearly visible, indicating substantial pore interconnectivity. Information on porosity and interconnectivity is critical for understanding Li ion transport mechanisms in mesoporous TiO2 anode materials.

36 MATERIALS SCIENCE↗

Hyperpolarized Xe-129 NMR Investigation of Ammonia Borane in Mesoporous Silica

Hyperpolarized (HP) 129Xe NMR was used for the first time to probe the porosity for nanophase ammonium borane (AB) infused in mesoporous silica (MCM). Variable temperature HP 129Xe NMR measurements have been systematically carried out on a series of AB:MCM materials with different AB loading. Three distinct types of pore environments are clearly evident: pristine mesopores; pores coated with AB inside the meso-channels, and inter-particle spacing formed from AB aggregates outside the meso-channels. We found similarly uniform coating of AB on mesoporous silica channels with 1:2 and 1:1 AB:MCM loading (ratio of weight percent). When the loading of AB to MCM is larger than 1:1, AB starts to aggregate outside the meso-channels. Further increases in loading (≥ 3:1) result in the formation of partially blocked meso-channels as a result of excessive AB loading. The detailed information obtained from this study on how supported AB resides in nanoporous channels and how it evolves with the increase of AB loading is helpful for rational design of novel materials with optimal hydrogen storage and release properties.

08 HYDROGEN↗

The Role of Non-Bonded Interactions in the Conformational Dynamics of Organophosphorous Hydrolase Adsorbed onto Functionalized Mesoporous Silica Surfaces

The enzyme organophosphorous hydrolase (OPH) catalyzes the hydrolysis of a wide variety of organophosphorous compounds with high catalytic efficiency and broad substrate specificity. The immobilization of OPH in functionalized mesoporous silica surfaces increases significantly its catalytic specific activity compared to the enzyme in solution with important applications for the detection and decontamination of insecticides and chemical warfare agents. Experimental measurements of immobilization efficiency as function of the charge and coverage percentage of different functional groups have been interpreted as electrostatic forces being the predominant interactions underlying the adsorption of OPH onto functionalized mesoporous silica surfaces. Explicit solvent molecular dynamics simulations have been performed for OPH in bulk solution and adsorbed onto two distinct interaction potential models of the mesoporous silica functional groups in order to investigate the relative contributions of non-bonded interactions to the conformational dynamics and adsorption of the protein. Our results support the conclusion that while electrostatic interactions are responsible for the specific binding of OPH to the FMS surface, van der Waals forces are detrimental for enhanced interfacial adhesion. Key-words: molecular dynamics simulations; bacterial phosphotriesterase; conformational changes; confined environments; coarse-grain and atomistic models; silanol molecular model.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗

Challenges in Fabrication of Mesoporous Carbon Films with Ordered Cylindrical Pores via Phenolic Oligomer Self-Assembly with Triblock Copolymers

Mesoporous phenol formaldehyde (PF) polymer resin and carbon films are prepared by a solution self-assembly of PF oligomers with amphiphilic triblock copolymers. After thermopolymerization of the PF to cross-link the network, the films show an ordered morphology as determined by X-ray diffraction and grazing incidence small-angle X-ray scattering (GISAXS). Our results show that the amphiphilic triblock copolymer template greatly influences the stability of the final porous mesostructures. The pyrolysis of the two-dimensional (2-D) hexagonal films with p6mm symmetry templated by Pluronic F127 yields a disordered porous structure following the template removal. Conversely, films templated by Pluronic P123 can exhibit well-ordered cylindrical pores after the template removal, but the solution composition range to yield ordered cylindrical mesopores is significantly reduced (nearly 70%) for thin films in comparison to bulk powders. We propose two dominant difficulties in fabricating well-ordered cylindrical mesopores in films: first, the stress from contraction during the pyrolysis can lead to a collapse of the mesostructure if the wall thickness is insufficient, and second, the surface wetting behavior in thin films leads to a small compositional range.

36 MATERIALS SCIENCE↗

Mesoporous Ni 60 Fe 30 Mn 10 -alloy based metal/metal oxide composite thick films as highly active and robust oxygen evolution catalysts

A major challenge in the field of water electrolysis is the scarcity of oxygen-evolving catalysts that are inexpensive, highly corrosion-resistant, suitable for large-scale applications and able to oxidize water at high current densities and low overpotentials. Most unsupported, non-precious metals oxygen-evolution catalysts require at least ~350 mV overpotential to oxidize water with a current density of 10 mA cm –2 in 1 M alkaline solution. In this paper we report on a robust nanostructured porous NiFe-based oxygen evolution catalyst made by selective alloy corrosion. In 1 M KOH, our material exhibits a catalytic activity towards water oxidation of 500 mA cm –2 at 360 mV overpotential and is stable for over eleven days. This exceptional performance is attributed to three factors. First, the small size of the ligaments and pores in our mesoporous catalyst (~10 nm) results in a high BET surface area (43 m 2 g –1 ) and therefore a high density of oxygen-evolution catalytic sites per unit mass. Second, the open porosity facilitates effective mass transfer at the catalyst/electrolyte interface. Third and finally, the high bulk electrical conductivity of the mesoporous catalyst allows for effective current flow through the electrocatalyst, making it possible to use thick films with a high density of active sites and ~3 × 10 4 cm 2 of catalytic area per cm 2 of electrode area. Our mesoporous catalyst is thus attractive for alkaline electrolyzers where water-based solutions are decomposed into hydrogen and oxygen as the only products, driven either conventionally or by photovoltaics.

36 MATERIALS SCIENCE↗

N- and S-doped mesoporous carbon as metal-free cathode catalysts for direct biorenewable alcohol fuel cells

Nitrogen and sulfur were simultaneously doped into the framework of mesoporous CMK-3 as metal-free catalysts for direct biorenewable alcohol fuel cells. Glucose, NH 3 , and thiophene were used as carbon, nitrogen and sulfur precursors, respectively, to prepare mesoporous N-S-CMK-3 with uniform mesopores and extra macropores, resulting in good O 2 diffusion both in half cell and alcohol fuel cell investigations. Among all investigated CMK-3 based catalysts, N-S-CMK-3 prepared at 800 °C exhibited the highest ORR activity with the onset potential of 0.92 V vs. RHE, Tafel slope of 68 mV dec -1 , and 3.96 electron transfer number per oxygen molecule in 0.1 M KOH. In addition, the alkaline membrane-based direct alcohol fuel cell (DAFC) with N-S-CMK-3 cathode displayed 88.2 mW cm -2 peak power density without obvious O 2 diffusion issue, reaching 84% initial performance of that with a Pt/C cathode. The high catalyst durability and fuel-crossover tolerance led to stable performance of the N-S-CMK-3 cathode DAFC with 90.6 mW cm -2 peak power density after 2 h operation, while the Pt/C cathode-based DAFC lost 36.9% of its peak power density. In conclusion, the high ORR activity of N-S-CMK-3 can be attributed to the synergistic effect between graphitic-N and S (C–S–C structure), suggesting great potential to use N-S-CMK-3 as an alternative to noble metal catalysts in the fuel cell cathode.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Solvent-free and rapid synthesis of mesoporous Pt–iron oxide catalysts via mechanochemical assembly

Mesoporous Fe x O y and Pt@Fe x O y have proven promising performance in catalysis. Yet, current methods usually use wet chemistry, which poses several drawbacks. Here, we introduce a simple process of mechanochemical assembly between an iron salt and a triblock copolymer in the solid state that can not only directly form abundant mesopores into Fe x O y , but also enable a high dispersion of Pt species at the nm or sub-nm scale. In this regard, mesoporous FexOy and Pt@Fe x O y catalysts with high surface areas (up to 149 m 2 g -1 ) and narrow pore size distributions (~5 nm) can be obtained in a solvent-free and rapid (0.5 h) way. The kinetic energy and frictional heating of ball milling are expected to promote the interaction and diffusion between iron precursors and surfactants, while the solvent-free feature confines their assembly to the mesophase of the P123 copolymer. Moreover, these Pt@Fe x O y catalysts provide good activity in the total oxidation of propylene and CO.

36 MATERIALS SCIENCE↗

Aluminum hydroxide-mediated synthesis of mesoporous metal oxides by a mechanochemical nanocasting strategy

Mesoporous metal oxides (MOs) have attracted significant interest in heterogeneous catalysis due to their wide pore size distribution and high pore volume. In this work, we present a facile mechanochemical nanocasting strategy using aluminum hydroxide as the mesoporous structure-directing agent, which overcomes the drawbacks associated with wet template-assisted methods. In this procedure, by simply grinding a mixture of commercial aluminum hydroxide and MO precursors, a series of mesoporous MOs with high specific surface areas and narrow pore size distributions have been constructed in a short time (e.g., Fe 2 O 3 , 280 m 2 g –1 ; Co 3 O 4 , 155 m 2 g –1 ; CeO 2 , 192 m 2 g –1 ; ZrO 2 , 170 m 2 g –1 ; CuO x –CeO y , 177 m 2 g –1 ; FeO x –CeO y , 170 m 2 g –1 ; CoO x –CuO y –CeO z , 154 m 2 g –1 ; CoO x –FeO y –CeO z , 133 m 2 g –1 ). It is expected that this strategy may open up new opportunities for fabricating a number of advanced porous materials with abundant porosity in the near future.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Creation of discrete active site domains via mesoporous silica poly(styrene) composite materials for incompatible acid–base cascade reactions

This work highlights the design and synthesis of bifunctional mesoporous silicate – polymer composite dual acid–base supported cascade catalysts. Compartmentalization of the two incompatible active sites is sought by segregating acid sites on the silica surface, and base sites within polymer chains and/or polymer domains. The ability to isolate and segregate active sites via control of the mesoporous silica pore size and polymer molecular weight is probed with silica samples functionalized by a grafting-to process. Supplemental activator and reducing agent (SARA) atom transfer radical polymerization is used to synthesize random copolymers containing protected primary amines. Thiol–ene ‘click’ chemistry facilitates silica functionalization via a convergent approach, with the ene-functionalized polymer end group and silica-grafted thiols forming SBA/MCM-SH-poly(styrene-co-2-(4-vinylbenzyl)isoindoline-1,3-dione). Polymer deprotection and thiol oxidation produces primary amine/sulfonic acid containing composite catalysts. With the polymer supported Lewis base and silica grafted Brønsted acid, the two-step deacetalization – Knoevenagel condensation cascade is explored to assess the ability of these polymer/silica hybrids to segregate active sites, allowing both acid and base site accessibility. Six composite catalysts are synthesized and tested in individual and cascade reactions with kinetic results demonstrating that lower molecular weight SBA-15-P1 and MCM-41-P1 catalysts outperform (higher turnover frequencies and initial rates) their higher molecular weight analogues, as well as a polymer-free system containing molecular active sites dispersed on the silica surface. Higher molecular weight composite catalysts perform more poorly due to limited chain solubility, mass transfer limitations, and poor catalyst accessibility. In many cases, the polymer chains effectively thread into the mesopores, with higher molecular weight polymers leading to pore blockage and inhibited mass transfer.

36 MATERIALS SCIENCE↗

Block copolymer self-assembly derived mesoporous magnetic materials with three-dimensionally (3D) co-continuous gyroid nanostructure

Magnetic nanomaterials are gaining interest for their many applications in technological areas from information science and computing to next-generation quantum energy materials. While magnetic materials have historically been nanostructured through techniques such as lithography and molecular beam epitaxy, there has recently been growing interest in using soft matter self-assembly. In this work, a triblock terpolymer, poly(isoprene-block-styrene-block-ethylene oxide) (ISO), is used as a structure directing agent for aluminosilicate sol nanoparticles and magnetic material precursors to generate organic–inorganic bulk hybrid films with co-continuous morphology. After thermal processing into mesoporous materials, results from a combination of small angle X-ray scattering (SAXS) and scanning electron microscopy (SEM) are consistent with the double gyroid morphology. Nitrogen sorption measurements reveal a type IV isotherm with H1 hysteresis, and yield a specific surface area of around 200 m 2 g −1 and an average pore size of 23 nm. The magnetization of the mesostructured material as a function of applied field shows magnetic hysteresis and coercivity at 300 K and 10 K. Comparison of magnetic measurements between the mesoporous gyroid and an unstructured bulk magnetic material, derived from the identical inorganic precursors, reveals the structured material exhibits a coercivity of 250 Oe, opposed to 148 Oe for the unstructured at 10 K, and presence of remnant magnetic moment not conventionally found in bulk hematite; both of these properties are attributed to the mesostructure. This scalable route to mesoporous magnetic materials with co-continuous morphologies from block copolymer self-assembly may provide a pathway to advanced magnetic nanomaterials with a range of potential applications.

Chemistry↗

Mesoporous Co{sub 3}O{sub 4} nanostructured material synthesized by one-step soft-templating: A magnetic study

A combined magnetization and zero-field {sup 59}Co spin-echo nuclear magnetic resonance (NMR) study has been carried out on one member of a recently developed class of highly ordered mesoporous nanostructured materials, mesoporous Co{sub 3}O{sub 4} (designated UCT-8, University of Connecticut, mesoporous materials). The material was synthesized using one-step soft-templating by an inverse micelles packing approach. Characterization of UCT-8 by powder x-ray diffraction and electron microscopy reveals that the mesostructure consists of random close-packed Co{sub 3}O{sub 4} nanoparticles ≈ 12 nm in diameter. The N{sub 2} sorption isotherm for UCT-8, which is type IV with a type H1 hysteresis loop, yields a 134 m{sup 2}/g BET surface area and a 7.7 nm BJH desorption pore diameter. The effect of heat treatment on the structure is discussed. The antiferromagnetic Co{sub 3}O{sub 4} nanoparticles have a Néel temperature T{sub N} = 27 K, somewhat lower than the bulk. A fit to the Curie-Weiss law over the temperature range 75 K ≤ T ≤ 300 K yields an effective magnetic moment of μ{sub eff} = 4.36 μ{sub B} for the Co{sup 2+} ions, indicative of some orbital contribution, and a Curie-Weiss temperature Θ = −93.5 K, consistent with antiferromagnetic ordering. The inter-sublattice and intra-sublattice exchange constants for the Co{sup 2+} ions are J{sub 1}/k{sub B} = (−)4.75 K and J{sub 2}/k{sub B} = (−)0.87 K, respectively, both corresponding to antiferromagnetic coupling. The presence of uncompensated surface spins is observed below T{sub N} with shifts in the hysteresis loops, i.e., an exchange-bias effect. The {sup 59}Co NMR spectrum for UCT-8, which is attributed to Co{sup 2+} ions at the tetrahedral A sites, is asymmetrically broadened with a peak at ≈55 MHz (T = 4.2 K). Since there is cubic symmetry at the A-sites, the broadening is indicative of a magnetic field distribution due to the uncompensated surface spins. The spectrum is consistent with antiferromagnetically ordered particles that are nanometer in size and single domain.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Surfactant-directed synthesis of mesoporous films made single-step by a tandem photosol-gel/photocalcination route

In view of their technological impact in materials chemistry, a simplified and more efficient synthetic route to mesoporous films is highly sought. We report, herein, a smart UV-mediated approach coupling in a one-stage process sol-gel photopolymerization and photoinduced template decomposition/ablation to making mesoporous silica films. Performed at room temperature with a solvent-free solution of silicate precursor and amphiphilic poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) block copolymer, the synthesis relies on photoacid generation to induce the fast formation (≈10 min) of mesostructured silica/surfactant domains. Continuation of UV exposure for three additional hours enables subsequent and complete photodegradation of the polyether copolymer, resulting in ordered or disordered mesoporous silica film. One of the most attractive features is that the one-step procedure relies on a continuous illumination provided by the same conventional medium-pressure Hg-Xe arc lamp equipped with a 254 nm reflector to enhance the emission of energetic photons <300 nm. In addition to X-ray diffraction and transmission electron microscopy, time-resolved Fourier transform infrared spectroscopy has proved to be a powerful in situ technique to probe the different chemical transformations accompanying irradiation. Photocalcination strengthens the inorganic network, while allowing to preserve a higher fraction of residual silanol groups compared with thermal calcination. A polyether chain degradation mechanism based on oxygen reactive species-mediated photo-oxidation is proposed.

36 MATERIALS SCIENCE↗

Mesoporous multi-shelled ZnO microspheres for the scattering layer of dye sensitized solar cell with a high efficiency

Both light scattering and dye adsorbing are important for the power conversion efficiency PCE performance of dye sensitized solar cell (DSSC). Nanostructured scattering layers with a large specific surface area are regarded as an efficient way to improve the PCE by increasing dye adsorbing, but excess adsorbed dye will hinder light scattering and light penetration. Thus, how to balance the dye adsorbing and light penetration is a key problem to improve the PCE performance. Here, multiple-shelled ZnO microspheres with a mesoporous surface are fabricated by a hydrothermal method and are used as scattering layers on the TiO{sub 2} photoanode of the DSSC in the presence of N719 dye and iodine–based electrolyte, and the results reveal that the DSSCs based on triple shelled ZnO microsphere with a mesoporous surface exhibit an enhanced PCE of 7.66%, which is 13.0% higher than those without the scattering layers (6.78%), indicating that multiple-shelled microspheres with a mesoporous surface can ensure enough light scattering between the shells, and a favorable concentration of the adsorbed dye can improve the light penetration. These results may provide a promising pathway to obtain the high efficient DSSCs.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Light-driven water oxidation by a dye-sensitized photoanode with a chromophore/catalyst assembly on a mesoporous double-shell electrode

A mesoporous atomic layer deposition (ALD) double-shell electrode, Al 2 O 3 (insulating core)//ALD ZnO|ALD TiO 2 , on a fluorine-doped tin oxide (FTO) conducting substrate was explored for a photoanode assembly, FTO//Al 2 O 3 (insulating core)//ALD ZnO|ALD TiO 2 |–chromophore–catalyst, for light-driven water oxidation. Photocurrent densities at photoanodes based on mesoporous ALD double-shell (ALD ZnO|ALD TiO 2 |) and ALD single-shell (ALD ZnO|, ALD TiO 2 |) electrodes were investigated for O 2 evaluation by a generator–collector dual working electrode configuration. The high photocurrent densities obtained based on the mesoporous ALD ZnO|ALD TiO 2 photoanode for O 2 evolution arise from a significant barrier to back electron transfer (BET) by the optimized tunneling barrier in the structure with the built-in electric field at the ALD ZnO|ALD TiO 2 interface. The charge recombination is thus largely decreased. Finally, in the films, BET following injection has been investigated through kinetic nanosecond transient absorption spectra, and the results of energy band analysis are used to derive insight into the internal electronic structure of the electrodes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Delayed emission of cold positronium from mesoporous materials

It is well known that ortho-positronium (ortho-Ps) atoms are emitted with high efficiency from various porous materials following the implantation of positrons. Since the ortho-Ps lifetime in a mesoporous material may be a substantial fraction of the ortho-Ps vacuum lifetime (142 ns), the time dependence of Ps emission may have to be considered when conducting certain types of experiments, such as time of flight measurements or pulsed ortho-Ps-laser interactions, when using this kind of target as a positronium source. By taking into account the positron implantation profile and subsequent Ps diffusion and decay in a mesoporous film we calculate the time dependent ortho-Ps emission rate {Gamma}(t), which in turn allows us to establish the total annihilation rate, arising from the decay of ortho-Ps both inside and outside the sample. Using time-delayed laser spectroscopy and single-shot lifetime measurements we have directly probed the rate at which Ps is emitted into vacuum from a target with {approx}3-nm diameter pores and have observed delayed ortho-Ps emission that is consistent with our model. From the ortho-Ps decay spectrum we find that, whereas a simple two-component lifetime fit gives a short lifetime of 25.3{+-}0.3 ns, an analysis that properly takes into account the emission rate yields an ortho-Ps lifetime inside the porous material of 32.3{+-}1.2 ns, demonstrating that the ortho-Ps escape rate into vacuum can significantly modify the apparent lifetime of ortho-Ps inside a mesoporous material. Our measurements yield a Ps diffusion coefficient D = 0.07 {+-} 0.01 cm{sup 2} s{sup -1}, which is consistent with a tunneling limited diffusion process.

36 MATERIALS SCIENCE↗

Block copolymer self-assembly-directed synthesis of mesoporous gyroidal superconductors

Superconductors with periodically ordered mesoporous structures are expected to have properties very different from those of their bulk counterparts. Systematic studies of such phenomena to date are sparse, however, because of a lack of versatile synthetic approaches to such materials. We demonstrate the formation of three-dimensionally continuous gyroidal mesoporous niobium nitride (NbN) superconductors from chiral ABC triblock terpolymer self-assembly–directed sol-gel–derived niobium oxide with subsequent thermal processing in air and ammonia gas. Superconducting materials exhibit a critical temperature ( T c ) of about 7 to 8 K, a flux exclusion of about 5% compared to a dense NbN solid, and an estimated critical current density ( J c ) of 440 A cm –2 at 100 Oe and 2.5 K. In conclusion, we expect block copolymer self-assembly–directed mesoporous superconductors to provide interesting subjects for mesostructure-superconductivity correlation studies.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Surfactant‐Templated Mesoporous Metal Oxide Nanowires

We demonstrate two approaches to prepare mesoporous metal oxide nanowires by surfactant assembly and nanoconfinement via sol‐gel or electrochemical deposition. For example, mesoporous Ta 2 O 5 and zeolite nanowires are prepared by block copolymer Pluronic 123‐templated sol‐gel method, and mesoporous ZnO nanowires are prepared by electrodeposition in presence of anionic surfactant sodium dodecyl sulfate (SDS) surfactant, in porous membranes. The morphologies of porous nanowires are studied by scanning electron microscopy (SEM) and transmission electron microscopy (TEM) analyses.

Luo, Hongmei↗