Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “jet interactions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
NASA NTRS2003

Airframe-Jet Engine Integration Noise

It has been found experimentally that the noise radiated by a jet mounted under the wing of an aircraft exceeds that of the same jet in a stand-alone environment. The increase in noise is referred to as jet engine airframe integration noise. The objectives of the present investigation are, (1) To obtain a better understanding of the physical mechanisms responsible for jet engine airframe integration noise or installation noise. (2) To develop a prediction model for jet engine airframe integration noise. It is known that jet mixing noise consists of two principal components. They are the noise from the large turbulence structures of the jet flow and the noise from the fine scale turbulence. In this investigation, only the effect of jet engine airframe interaction on the fine scale turbulence noise of a jet is studied. The fine scale turbulence noise is the dominant noise component in the sideline direction. Thus we limit out consideration primarily to the sideline.

Tam, Christopher↗
NASA NTRSDate not supplied

Aircraft System Noise Assessment of the NASA Single-Aisle Over-the-Wing Nacelle Configuration

A system noise assessment of the NASA single-aisle over-wing nacelle configuration, the OWN160, is carried out to estimate the performance of the configuration relative to NASA noise goals. The vehicle was first designed during the Environmentally Responsible Aviation(ERA)project, and last analyzed in 2016.Renewed interest in the concept necessitates an updated acoustic prediction. A model for jet-trailing edge interaction noise is developed from experimental data and included in the system noise assessment and analysis. Total system noise is predicted using NASA’s research-level Aircraft Noise Prediction Program (ANOPP-Research). Results are evaluated with and without the jet-trailing edge effect and compared to prior analysis and an equivalent conventional aircraft configuration, the TW160. The jet-trailing edge interaction affects the noise source ranking and increases the total noise of the OWN160, but the concept retains an advantage for noise reduction when compared to the conventional configuration with a cumulative reduction of 7.7 EPNdB (ERA results showed a 9.7 EPNdB reduction).

Kelly M Shelts↗
NASA NTRS2022

Editorial: Flux Rope Interaction With the Ambient Corona: From Jets to CMEs

Eruptive events within the Sun’s corona occur across a broad range of scales, from abundant small-scale jets to highly energetic coronal mass ejections (CMEs) (e.g., Webb and Howard, 2012; Raouafi et al., 2016; Kumar et al., 2021). Flux ropes have been understood to be a fundamental constituent of CMEs for many years, but it has only been more recently that their role in smaller eruptive events has become more appreciated (e.g., Sterling et al., 2015; Wyper et al., 2017). The key to understanding the differing morphology and nature of eruptions on these vastly differing scales is to understand the nature of the interaction between the flux ropes involved and the magnetic field of the surrounding corona. This Research Topic invited perspectives on (and examples of) flux rope eruptions across this broad range of scales, from formation to ejection, with the aim of highlighting commonalities and differences to aid in ultimately building a common framework for their understanding. Starting at the smallest scales, Schmieder presented a historically ordered review of jets and surges. The parallel improvements in instrumentation, physical insight and numerical simulations over time were highlighted along with the ways in which improvements in one area led to developments in another. Overall, jets of all forms are presented as the result of magnetic reconnection between two magnetic domains, with the reconnection involving a null point, bald patch separatrix or quasi-separatrix layer. In particular, jets with observed rotational motions often involve the transfer of twist from a small-scale filament or flux rope by reconnection across the separatrix.

solar corona and wind↗
NASA NTRS1993

On magnetodynamic effects initiated by a high-speed impact of a large cosmic body upon the Earth's surface

The impact of a large cosmic body with typical size R approximately = 1 km (mass M approximately = 4-10 Gt for a stony or icy body) moving with velocity V approximately = 50-70 km/s (kinetic energy of the order of 10 exp 21 J or 10 exp 6 Mt of TMT) on the Earth's surface leads to a full vaporization of a body and of a significant part of substance of the upper layers of the Earth and even to the ionization of this vapor cloud. As a result, a hypersonic jet of air and erosion plasma is formed. The kinetic energy E sub J is far above the total energy of the geomagnetic field of the Earth (approximately equivalent to the energy of 100 Mt) and the total mass of a fast-moving part of the jet M sub j approximately = 10 exp 12 kg is far above the mass of atmosphere in the jet expansion cone. Thus, the jet will propagate practically inertially with the constant mean velocity U approximately = 10-20 km/s and even higher. The interaction of this plasma jet with the Earth's magnetic field causes magnetodynamic effects similar to those which are produced by cosmic nuclear explosions but of a larger scale. The preliminary results of experimental and numerical modeling of the plasma jet-magnetosphere interaction are presented.

Nemchinov, I. V.↗
NASA NTRS1993

Lateral control at high angles of attack using pneumatic blowing through a chined forebody

Directional control through the use of pneumatic blowing was investigated on a generic subscale model with a chined forebody with blowing through a chine slot in a direction normal to the forebody surface. Comparisons are made with a vertical tail on and off, and with control through rudder deflection. Force and moment data were obtained for various blowing coefficients over a 0-75 deg alpha range, and flow visualization was also conducted in order to see qualitative effects on the flowfield. Blowing through a chined forebody generates yaw moments at large alpha where control surfaces lose their effectiveness; these moments are much larger than obtained by jet thrust alone, since the forebody flowfield is modified through the interaction of the jet with the chine vortices. Directional control increased with angle of attack for a given blowing coefficient until a maximum was reached. Further increases in angle of attack results in a rapid loss of effectiveness. For angles of attack above 60 deg, yaw moments are generated by simple jet thrust effect. The effectiveness of the pneumatic system depended on tail configuration.

Arena, A. S., Jr.↗
NASA NTRS1993

Radio jets in colliding galaxies: Testing the interaction-activity connection

The idea that galaxy interactions and merging are related to the generation of starburst and AGN activity in galactic nuclei has been the subject of intensive investigations over the past several years and is still a matter of lively debate. Peculiar morphologies, indicative of tidal interactions, have been detected in high-luminosity radio galaxies, in quasars, and in ultraluminous IRAS galaxies. In addition, low-luminosity radio and active galaxies show similar evidence for a recent merger or for nearby companions. In a recent CCD optical study of galaxies selected on the basis that they all contain well defined radio jets, it was found that almost half of the sample consists of pairs of elliptical galaxies. Many of these low-luminosity radio galaxies with companions show a well defined distorted radio jet structure at the VLA scale with an S- or C-shaped morphology. We have developed a general numerical simulation algorithm for ballistic radio jets with the intention of applying this model to the study of the bent jets seen in colliding pairs of galaxies and with the hope of testing the well documented interaction-activity connection. In our model the morphological evolution of the jets is determined by their response to the simple mechanical forces (i.e., gravity and ram pressure) imposed on them from both the host and the companion galaxies. Radiative losses, jet precession, magnetic effects, relativistic terms, and hydrodynamic instabilities have all been ignored. Starting with a previously derived collision model for the interacting pair of elliptical galaxies NGC 4782/4783, we have used our algorithm to simulate the specific two-sided jet morphology seen in the radio source 3C 278, associated with NGC 4782. This is the first time that such jet simulations have been produced for a galaxy pair whose relative orbit was determined independently from the jet modeling.

Borne, Kirk D.↗
NASA NTRS1993

The ground vortex flow field associated with a jet in a cross flow impinging on a ground plane for uniform and annular turbulent axisymmetric jets

An experimental study was conducted of the impingement of a single circular jet on a ground plane in a cross flow. This geometry is a simplified model of the interaction of propulsive jet exhaust from a V/STOL aircraft with the ground in forward flight. Jets were oriented normal to the cross flow and ground plane. Jet size, cross flow-to-jet velocity ratio, ground plane-to-jet board spacing, and jet exit turbulence level and mean velocity profile shape were all varied to determine their effects on the size of the ground vortex interaction region which forms on the ground plane, using smoke injection into the jet. Three component laser Doppler velocimeter measurements were made with a commercial three color system for the case of a uniform jet with exit spacing equal to 5.5 diameters and cross flow-to-jet velocity ratio equal to 0.11. The flow visualization data compared well for equivalent runs of the same nondimensional jet exit spacing and the same velocity ratio for different diameter nozzles, except at very low velocity ratios and for the larger nozzle, where tunnel blockage became significant. Variation of observed ground vortex size with cross flow-to-jet velocity ratio was consistent with previous studies. Observed effects of jet size and ground plane-to-jet board spacing were relatively small. Jet exit turbulence level effects were also small. However, an annular jet with a low velocity central core was found to have a significantly smaller ground vortex than an equivalent uniform jet at the same values of cross flow-to-jet velocity ratio and jet exit-to-ground plane spacing. This may suggest a means of altering ground vortex behavior somewhat, and points out the importance of proper simulation of jet exit velocity conditions. LV data indicated unsteady turbulence levels in the ground vortex in excess of 70 percent.

Cavage, William M.↗
NASA NTRS1992

Acoustic interactions between an altitude test facility and jet engine plumes: Theory and experiments

The overall objective of the described effort was to develop an understanding of the physical mechanisms involved in the flow/acoustic interactions experienced in full-scale altitude engine test facilities. This is done by conducting subscale experiments and through development of a theoretical model. Model cold jet experiments with an axisymmetric convergent nozzle are performed in a test setup that stimulates a supersonic jet exhausting into a cylindrical diffuser. The measured data consist of detailed flow visualization data and acoustic spectra for a free and a ducted plume. It is shown that duct resonance is most likely responsible by theoretical calculations. Theoretical calculations also indicate that the higher discrete tones observed in the measurements are related to the screech phenomena. Limited experiments on the sensitivity of a free 2-D, C-D nozzle to externally imposed sound are also presented. It is shown that a 2-D, C-D nozzle with a cutback is less excitable than a 2-D C-D nozzle with no cutback. At a pressure ratio of 1.5 unsteady separation from the diverging walls of the nozzle is noticed. This separation switches from one wall to the opposite wall thus providing an unsteady deflection of the plume. It is shown that this phenomenon is related to the venting provided by the cutback section.

Ahuja, K. K.↗
NASA NTRS1987

Synergistic interactions between an upper-level jet streak and diabatic processes that influence the development of a low-level jet and a secondary coastal cyclone

A series of numerical simulations of the February 1979 Presidents Day cyclone is presented. The development of the low-level jet (LLJ) associated with the cyclone is described, and the mesoscale numerical model, initial analyses, and experimental design used in the study are discussed. Four numerical simulations are discussed and compared, including an adiabatic simulation that isolates the development of upper-level divergence along the axis of a subtropical jet streak and three other simulations that reveal the contributions of sensible and latent heat release in modifying lower-tropospheric wind fields and reducing the sea-level pressure. The formation of the LLJ is described through an evaluation of trajectories derived from the various model simulations. The effect of the LLJ on secondary cyclogenesis along the East Coast is described.

Uccellini, Louis W.↗
NASA NTRS1997

Collective Interaction of a Compressible Periodic Parallel Jet Flow

A linear instability model for multiple spatially periodic supersonic rectangular jets is solved using Floquet-Bloch theory. The disturbance environment is investigated using a two dimensional perturbation of a mean flow. For all cases large temporal growth rates are found. This work is motivated by an increase in mixing found in experimental measurements of spatially periodic supersonic rectangular jets with phase-locked screech. The results obtained in this paper suggests that phase-locked screech or edge tones may produce correlated spatially periodic jet flow downstream of the nozzles which creates a large span wise multi-nozzle region where a disturbance can propagate. The large temporal growth rates for eddies obtained by model calculation herein are related to the increased mixing since eddies are the primary mechanism that transfer energy from the mean flow to the large turbulent structures. Calculations of growth rates are presented for a range of Mach numbers and nozzle spacings corresponding to experimental test conditions where screech synchronized phase locking was observed. The model may be of significant scientific and engineering value in the quest to understand and construct supersonic mixer-ejector nozzles which provide increased mixing and reduced noise.

Miles, Jeffrey Hilton↗
NASA NTRS2018

A Long-Lived Neutron Star Merger Remnant in GW170817: Constraints and Clues from X-ray Observations

Multimessenger observations of GW170817 have not conclusively established whether the merger remnant is a black hole (BH) or a neutron star (NS). We show that a long-lived magnetized NS with a poloidal field B ≈ 1012 G is fully consistent with the electromagnetic dataset, when spin-down losses are dominated by gravitational wave (GW) emission. The required ellipticity ε >~ 10−5 can result from a toroidal magnetic field component much stronger than the poloidal component, a configuration expected from an NS newly formed from a merger. Abrupt magnetic dissipation of the toroidal component can lead to the appearance of X-ray flares, analogous to the one observed in gamma-ray burst (GRB) afterglows. In the X-ray afterglow of GW170817, we identify a low-significance (>~3σ) temporal feature at 155 d, consistent with a sudden reactivation of the central NS. Energy injection from the NS spin-down into the relativistic shock is negligible, and the underlying continuum is fully accounted for by a structured jet seen off-axis. Whereas radio and optical observations probe the interaction of this jet with the surrounding medium, observations at X-ray wavelengths, performed with adequate sampling, open a privileged window on to the merger remnant.

gravitational waves↗
NASA NTRS1977

Development of prediction techniques for multi-jet thermal ground flow fields and fountain formation

Avoiding detrimental ground interaction is important for practical V/STOL aircraft. This paper reports recent developments in a numerical method for estimating thermal ground footprints. Upwash and fountain formation for arbitrarily oriented jet arrangements is predicted. Flow asymmetry due to roll, pitch, differential thrust or ground inclination is included. The prediction methodology uses simple inviscid relations for energy and momentum conservation along with an empirical entrainment law, applied in independent sectors of the wall jet and upwash. Asymmetrical stagnation line prediction is compared with experiment. Detailed flow measurements for a three-jet interaction are also presented.

Siclari, M. J.↗
NASA NTRS1990

Multiwave nonlinear interactions in the axisymmetric mode

Nonlinear wave-wave interactions in turbulent jets were investigated based on the integrated energy of each scale of motion in a cross section of the jet. The analysis indicates that two frequency components in the axisymmetric mode can interact with other background frequencies in the axisymmetric mode, thereby amplifying an enormous number of other frequencies. The present computations produce several features consistent with experimental observations such as dependency of the interactions on the initial phase differences; enhancement of the momentum thickness under multi-frequency forcing: and an increase in background turbulence under forcing.

Mankbadi, Reda R.↗
NASA NTRS1997

Laboratory Plasma Source as an MHD Model for Astrophysical Jets

The significance of the work described herein lies in the demonstration of Magnetized Coaxial Plasma Gun (MCG) devices like CPS-1 to produce energetic laboratory magneto-flows with embedded magnetic fields that can be used as a simulation tool to study flow interaction dynamic of jet flows, to demonstrate the magnetic acceleration and collimation of flows with primarily toroidal fields, and study cross field transport in turbulent accreting flows. Since plasma produced in MCG devices have magnetic topology and MHD flow regime similarity to stellar and extragalactic jets, we expect that careful investigation of these flows in the laboratory will reveal fundamental physical mechanisms influencing astrophysical flows. Discussion in the next section (sec.2) focuses on recent results describing collimation, leading flow surface interaction layers, and turbulent accretion. The primary objectives for a new three year effort would involve the development and deployment of novel electrostatic, magnetic, and visible plasma diagnostic techniques to measure plasma and flow parameters of the CPS-1 device in the flow chamber downstream of the plasma source to study, (1) mass ejection, morphology, and collimation and stability of energetic outflows, (2) the effects of external magnetization on collimation and stability, (3) the interaction of such flows with background neutral gas, the generation of visible emission in such interaction, and effect of neutral clouds on jet flow dynamics, and (4) the cross magnetic field transport of turbulent accreting flows. The applicability of existing laboratory plasma facilities to the study of stellar and extragalactic plasma should be exploited to elucidate underlying physical mechanisms that cannot be ascertained though astrophysical observation, and provide baseline to a wide variety of proposed models, MHD and otherwise. The work proposed herin represents a continued effort on a novel approach in relating laboratory experiments to astrophysical jet observation. There exists overwhelming similarity among these flows that has already produced some fascinating results and is expected to continue a high pay off in future flow similarity studies.

Mayo, Robert M.↗