Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “inversion methods”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20
All sourcesNASA NTRSDOE OSTI
NASA NTRS2007

Structural Analysis Methods for Structural Health Management of Future Aerospace Vehicles

Two finite element based computational methods, Smoothing Element Analysis (SEA) and the inverse Finite Element Method (iFEM), are reviewed, and examples of their use for structural health monitoring are discussed. Due to their versatility, robustness, and computational efficiency, the methods are well suited for real-time structural health monitoring of future space vehicles, large space structures, and habitats. The methods may be effectively employed to enable real-time processing of sensing information, specifically for identifying three-dimensional deformed structural shapes as well as the internal loads. In addition, they may be used in conjunction with evolutionary algorithms to design optimally distributed sensors. These computational tools have demonstrated substantial promise for utilization in future Structural Health Management (SHM) systems.

Tessler, Alexander↗
NASA NTRS1984

Transonic viscous-inviscid interaction using Euler and inverse boundary-layer equations

The paper is concerned with the use of a zonal method for the computation of transonic viscous-inviscid interacting flow about airfoils. The inviscid portion of the flow is treated by using an Euler equation solution method, while an inverse integral compressible turbulent boundary-layer solution method is used for the viscous portion of the flow. The matching of the viscous and inviscid solutions is discussed, and some numerical results as well as comparisons with experimental data are presented.

Whitfield, D. L.↗
NASA NTRS1972

On the computation of the generalized inverse by classical minimization.

An alternative method for deriving the generalized inverse of an arbitrary rectangular matrix with real or complex coefficients is described. The method applies a classical minimization procedure without iteration processes and is readily applicable in digital computer programming.

Voith, R. P.↗
NASA NTRS1973

On the reduction of occultation light curves

The two basic methods of reducing occultation light curves - curve fitting and inversion - are reviewed and compared. It is shown that the curve fitting methods have severe problems of nonuniqueness. In addition, in the case of occultation curves dominated by spikes, it is not clear that such solutions are meaningful. The inversion method does not suffer from these drawbacks. Methods of deriving temperature profiles from refractivity profiles are then examined. It is shown that, although the temperature profiles are sensitive to small errors in the refractivity profile, accurate temperatures can be obtained, particularly at the deeper levels of the atmosphere. The ambiguities that arise when the occultation curve straddles the turbopause are briefly discussed.

Wasserman, L.↗
NASA NTRS1984

Transonic cascade flow analysis using viscous/inviscid coupling concepts

Transonic two-dimensional cascade flows have been analyzed using viscous/inviscid coupling concepts. A full potential cascade code is coupled with an inverse integral boundary layer/wake method that permits calculation of separated laminar or turbulent flow. The semi-inverse coupling method of Wigton converges slowly in the case of a strong shock in the region between the shock and the trailing edge. The location of a strong shock is not well predicted by the coupling method, which indicates the need for an entropy correction in the potential code or the inclusion of a shock-boundary layer interaction module.

Olling, C. R.↗
NASA NTRS1991

The coupling of radiative transfer to quasi 1-D flows with thermochemical nonequilibrium

Quasi-one-dimensional nonequilibrium nozzle flows with coupled radiative transfer are considered. The strongly coupled formulation of radiation and flowfield leads to a governing set of integro-differential equations. A fully implicit numerical method using the full matrix inversion or block iteration methods is presented to solve these equations. The nonequilibrium gas model consists of two chemical species, molecular and atomic nitrogen. The thermodynamic state of the gas is described by two temperatures, translational-rotational and vibrational, and the thermal radiation is assumed to be governed by the vibrational temperature. In radiative transfer, gases are assumed to be absorbing and emitting, and a detailed spectral dependency of the absorption coefficient is prescribed for a non-gray gas. The numerical solutions of strongly radiating nonequilibrium flows are presented for both gray and non-gray gases.

Gokcen, Tahir↗
NASA NTRS1991

Extended mapping and characteristics techniques for inverse aerodynamic design

Some ideas for using hodograph theory, mapping techniques and methods of characteristics to formulate typical aerodynamic design boundary value problems are developed. The inverse method of characteristics is shown to be a fast tool for design of transonic flow elements as well as supersonic flows with given shock waves.

Sobieczky, H.↗
NASA NTRS1993

Variable-permittivity linear inverse problem for the H(sub z)-polarized case

The H(sub z)-polarized inverse problem has rarely been studied before due to the complicated way in which the unknown permittivity appears in the wave equation. This problem is equivalent to the acoustic inverse problem with variable density. We have recently reported the solution to the nonlinear variable-permittivity H(sub z)-polarized inverse problem using the Born iterative method. Here, the linear inverse problem is solved for permittivity (epsilon) and permeability (mu) using a different approach which is an extension of the basic ideas of diffraction tomography (DT). The key to solving this problem is to utilize frequency diversity to obtain the required independent measurements. The receivers are assumed to be in the far field of the object, and plane wave incidence is also assumed. It is assumed that the scatterer is weak, so that the Born approximation can be used to arrive at a relationship between the measured pressure field and two terms related to the spatial Fourier transform of the two unknowns, epsilon and mu. The term involving permeability corresponds to monopole scattering and that for permittivity to dipole scattering. Measurements at several frequencies are used and a least squares problem is solved to reconstruct epsilon and mu. It is observed that the low spatial frequencies in the spectra of epsilon and mu produce inaccuracies in the results. Hence, a regularization method is devised to remove this problem. Several results are shown. Low contrast objects for which the above analysis holds are used to show that good reconstructions are obtained for both permittivity and permeability after regularization is applied.

Moghaddam, M.↗
NASA NTRS1995

Reverberation mapping by regularized linear inversion

Reverberation mapping of active galactic nucleus (AGN) emission-line regions requires the numerical deconvolution of two time series. We suggest the application of a new method, regularized linear inversion, to the solution of this problem. This method possesses many good features; it imposes no restrictions on the sign of the response function; it can provide clearly defined uncertainty estimates; it involves no guesswork about unmeasured data; it can give a clear indication of when the underlying convolution model is inadequate; and it is computationally very efficient. Using simulated data, we find the minimum S/N and length of the time series in order for this method to work satisfactorily. We also define guidelines for choosing the principal tunable parameter of the method and for interpreting the results. Finally, we reanalyze published data from the 1989 NGC 5548 campaign using this new method and compare the results to those previously obtained by maximum entropy analysis. For some lines we find good agreement, but for others, especially C III lambda(1909) and Si IV lambda(1400), we find significant differences. These can be attributed to the inability of the maximum entropy method to find negative values of the response function, but also illustrate the nonuniqueness of any deconvolution technique. We also find evidence that certain line light curves (e.g., C IV lambda(1549)) cannot be fully described by the simple linear convolution model.

Krolik, Julian H.↗
NASA NTRS1979

Numerical methods for problems involving the Drazin inverse

The objective was to try to develop a useful numerical algorithm for the Drazin inverse and to analyze the numerical aspects of the applications of the Drazin inverse relating to the study of homogeneous Markov chains and systems of linear differential equations with singular coefficient matrices. It is felt that all objectives were accomplished with a measurable degree of success.

Meyer, C. D., Jr.↗
NASA NTRS1971

Comparison of various methods for mathematical analysis of the Foucault knife edge test pattern to determine optical imperfections

The linearized integral equation for the Foucault test of a solid mirror was solved by various methods: power series, Fourier series, collocation, iteration, and inversion integral. The case of the Cassegrain mirror was solved by a particular power series method, collocation, and inversion integral. The inversion integral method appears to be the best overall method for both the solid and Cassegrain mirrors. Certain particular types of power series and Fourier series are satisfactory for the Cassegrain mirror. Numerical integration of the nonlinear equation for selected surface imperfections showed that results start to deviate from those given by the linearized equation at a surface deviation of about 3 percent of the wavelength of light. Several possible procedures for calibrating and scaling the input data for the integral equation are described.

Gatewood, B. E.↗
NASA NTRS1978

Procedures utilized for obtaining direct and remote atmospheric carbon monoxide measurements over the lower Lake Michigan Basin in August of 1976

In order to establish the applicability of a gas filter correlation radiometer, GFCR, to remote carbon monoxide, CO, measurements on a regional and worldwide basis, Old Dominion University has been engaged in the development of accurate and cost effective techniques for inversion of GFCR CO data and in the development of an independent gas chromatographic technique for measuring CO. This independent method is used to verify the results and the associated inversion method obtained from the GFCR. A description of both methods (direct and remote) will be presented. Data obtained by both techniques during a flight test over the lower Lake Michigan Basin in August of 1976 will also be discussed.

Casas, J. C.↗
NASA NTRS1992

The double universal joint wrist on a manipulator: Solution of inverse position kinematics and singularity analysis

This paper presents three methods to solve the inverse position kinematics position problem of the double universal joint attached to a manipulator: (1) an analytical solution for two specific cases; (2) an approximate closed form solution based on ignoring the wrist offset; and (3) an iterative method which repeats closed form position and orientation calculations until the solution is achieved. Several manipulators are used to demonstrate the solution methods: cartesian, cylindrical, spherical, and an anthropomorphic articulated arm, based on the Flight Telerobotic Servicer (FTS) arm. A singularity analysis is presented for the double universal joint wrist attached to the above manipulator arms. While the double universal joint wrist standing alone is singularity-free in orientation, the singularity analysis indicates the presence of coupled position/orientation singularities of the spherical and articulated manipulators with the wrist. The cartesian and cylindrical manipulators with the double universal joint wrist were found to be singularity-free. The methods of this paper can be implemented in a real-time controller for manipulators with the double universal joint wrist. Such mechanically dextrous systems could be used in telerobotic and industrial applications, but further work is required to avoid the singularities.

Williams, Robert L., III↗
NASA NTRS1972

Comparative evolution of the inverse problems (Introduction to an interdisciplinary study of the inverse problems)

The progressive realization of the consequences of nonuniqueness imply an evolution of both the methods and the centers of interest in inverse problems. This evolution is schematically described together with the various mathematical methods used. A comparative description is given of inverse methods in scientific research, with examples taken from mathematics, quantum and classical physics, seismology, transport theory, radiative transfer, electromagnetic scattering, electrocardiology, etc. It is hoped that this paper will pave the way for an interdisciplinary study of inverse problems.

Sabatier, P. C.↗
NASA NTRS1991

Inverse airfoil design procedure using a multigrid Navier-Stokes method

The Modified Garabedian McFadden (MGM) design procedure was incorporated into an existing 2-D multigrid Navier-Stokes airfoil analysis method. The resulting design method is an iterative procedure based on a residual correction algorithm and permits the automated design of airfoil sections with prescribed surface pressure distributions. The new design method, Multigrid Modified Garabedian McFadden (MG-MGM), is demonstrated for several different transonic pressure distributions obtained from both symmetric and cambered airfoil shapes. The airfoil profiles generated with the MG-MGM code are compared to the original configurations to assess the capabilities of the inverse design method.

Malone, J. B.↗
NASA NTRS1972

The inverse scattering problem for transmission lines

A number of exact and approximate methods for solving the inverse scattering problem for transmission lines are reviewed. In particular, the application to transmission lines of Marcenko's version of the Gelfand-Levitan exact method for the quantum mechanical problem is compared with a more direct approach based on a different version of the Gelfand-Levitan method. In addition, some aspects of the lack of uniqueness of solutions are discussed, and some open questions related to the inverse scattering problem are suggested.

Kay, I.↗
NASA NTRS2001

Fast Computation of the Inverse CMH Model

A fast computational method based on differential equation approach for inverse DOK model has been extended for the inverse CMH model. Also, a cobweb technique for calculating the inverse CMH model is also presented. The two techniques are differed from the point of view of flexibility and computation time.

Patel, Umesh D.↗