Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “harmonic analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

Chapter 7.1: Microalgae

Microalgae is a unique biomass resource that does not need to compete for land and water with other biomass feedstocks because it can be cultivated on low-quality unencumbered land using noncompetitive water types including saline and wastewater. It is included as a complementary resource alongside other biomass feedstocks reported in this study, albeit at higher biomass production costs reflective of more capital-intensive farming operations than typical for terrestrial biomass. Higher biomass costs can be offset by the potential to produce value-added coproducts unique to compositional constituents of microalgae. Relative to BT16, this chapter reflects the latest analysis from the 2022 Algae Harmonization Update, which uses the latest parameterized and high-performing saline algal strain, second-generation carbon capture of point-source waste CO2 and high-pressure pipeline transport resolved to specific point-source types, saline water sourcing up to 40,000 mg/L total dissolved solids for source and makeup water salinity, blowdown water treatment and recycle, and brine disposal handling. National-scale algal biomass availability potential was calculated at 152 million tons/yr ash-free dry weight (AFDW) (191 million tons/yr dry weight) at an average biomass productivity of 26.2 g/m2 -day AFDW (about 50 tons/acre/yr dry weight).1 The algal biomass was cultivated on 3.9 million acres of multi-criteria screened and potentially available land for CONUS and fixed 268 million tons of waste CO2 based on biomass uptake. The algae biomass can be produced at an average MBSP of $674/ton AFDW ($536/ton dry weight) in 2020 dollars,2 corresponding to a total energy potential of 3.3 quads/yr at an average MBSP of $31.2/MMBtu (higher-heating-value [HHV] basis).

algae↗

Modeling and Simulation of Inrush Currents in Harmonic Domain

Modeling and simulation capabilities are critical to the stability analysis and evaluation of power distribution systems, with respect to the emphasis on resiliency, microgrids, and distributed energy resources. In this paper, a computational method in the harmonic domain is proposed for the periodic steady-state analysis of the nonlinear inrush current phenomenon. The efficient inrush calculation facilitates the predictions of current amplitudes for the power system operation and control. To demonstrate the accuracy and efficiency, simulation results in the harmonic domain are compared with results from PSCAD in an electromagnetic timescale, as well as the authors’ previous works in the frequency-domain. Impacts of the settings of both offset flux and interested harmonic order are discussed. In addition, within the proposed harmonic-domain method, a general approach that utilizes the discrete Fourier transform to obtain the response of a nonlinear device from a stimulus represented in the frequency-domain is utilized. This method can also be extended to perform the transient analysis in future, using trapezoidal rule for the integration.

Xie, Jing↗

Aeroelastic simulation of higher harmonic control

This report describes the development of an aeroelastic analysis of a helicopter rotor and its application to the simulation of helicopter vibration reduction through higher harmonic control (HHC). An improved finite-state, time-domain model of unsteady aerodynamics is developed to capture high frequency aerodynamic effects. An improved trim procedure is implemented which accounts for flap, lead-lag, and torsional deformations of the blade. The effect of unsteady aerodynamics is studied and it is found that its impact on blade aeroelastic stability and low frequency response is small, but it has a significant influence on rotor hub vibrations. Several different HHC algorithms are implemented on a hingeless rotor and their effectiveness in reducing hub vibratory shears is compared. All the controllers are found to be quite effective, but very differing HHC inputs are required depending on the aerodynamic model used. Effects of HHC on rotor stability and power requirements are found to be quite small. Simulations of roughly equivalent articulated and hingeless rotors are carried out, and it is found that hingeless rotors can require considerably larger HHC inputs to reduce vibratory shears. This implies that the practical implementation of HHC on hingeless rotors might be considerably more difficult than on articulated rotors.

Robinson, Lawson H.↗

Multiresolution Quantum Chemistry: Nonlinear Response Properties at the Basis Set Limit

We benchmark the accuracy of Dunning correlation-consistent Gaussian basis sets for computing frequencydependent second-order hyperpolarizabilities relevant to second-harmonic generation (SHG), using multiresolution analysis (MRA) as a reference. Basis set errors are analyzed using a unit-sphere representation of the effective hyperpolarizability vector, enabling direct assessment of directional error structure. We introduce a relative RMS total error metric that integrates directional deviations over the unit sphere and complement it with signed projection errors that distinguish over- and underestimation. Unsupervised clustering based on these signed directional metrics reveals four distinct convergence behaviors across a set of 68 molecules. Unitsphere visualizations of representative systems show that basis set errors are often highly anisotropic and localized along specific bond directions, even when global error measures appear small. Doubly augmented basis sets consistently outperform singly augmented ones, and core-polarization functions are required for uniform convergence in second-row systems. Overall, this work demonstrates that directional analysis combined with clustering provides a robust framework for understanding basis set convergence in nonlinear optical response properties.

Basis sets↗

2023 Billion-Ton Report: An Assessment of U.S. Renewable Carbon Resources - Microalgae

Microalgae is a unique biomass resource that does not need to compete for land and water with other biomass feedstocks because it can be cultivated on low-quality unencumbered land using noncompetitive water types including saline and wastewater. It is included as a complementary resource alongside other biomass feedstocks reported in this study, albeit at higher biomass production costs reflective of more capital-intensive farming operations than typical for terrestrial biomass. Higher biomass costs can be offset by the potential to produce value-added coproducts unique to compositional constituents of microalgae. Relative to the 2016 Billion-Ton Report, this chapter reflects the latest analysis from the 2022 Algae Harmonization Update, which uses the latest parameterized and high-performing saline algal strain, second-generation carbon capture of point-source waste CO 2 , and high-pressure pipeline transport resolved to specific point-source types, saline water sourcing up to 40,000 mg/L total dissolved solids for source and makeup water salinity, blowdown water treatment and recycle, and brine disposal handling. National-scale algal biomass availability potential was calculated at 152 million tons/yr ash-free dry weight (AFDW) (191 million tons/yr dry weight) at an average biomass

09 BIOMASS FUELS↗

United States Multi-Sector Dynamics land use and land cover base maps to support Human-Earth System Modeling

Datasets are land use and land cover (LULC) rasterized base maps at 30-m resolution for the conterminous United States (CONUS) for the years 2008, 2011, 2016, and 2019. Separate base maps are provided where LULC classifications are thematically congruent with Community Land Model (CLM), Land Use Harmonization (LUH2), and Global Change Analysis Model (GCAM), and a detailed decomposition of all combined land classes into a Multisector Dynamics (MSD) LULC product. Base maps were developed using empirically derived satellite (National Land Cover Dataset, MODIS) and combined observation datasets (Crop Data Layer, Protected Areas Database) and represent the most up-to-date accurate information on LULC in the CONUS. The four datasets encompass four different landcover classification systems: MSD Layers - The raw landcover classes obtained from reclassifying NLCD and USDA Crop data layers into a respective landcover class GCAM Layers - The MSD classes mosaiced, reclassified, and combined into the respective GCAM landcover classes CLM Layers - Similar process to GCAM layers, but mosaiced, reclassified, and combined MSD layers to their respective PFT classes LUH2 Layers - Similar process to both GCAM and CLM Layers, but mosaiced, reclassified and combined the MSD layers to align with the respective states

Food↗

Theory of the phase anomaly in the thermosphere

The temperature-density phase anomaly is discussed on the basis of a quasi-three-dimensional model in which the thermosphere dynamics (including energy advection and diffusion associated with wind circulation) is considered in a self consistent form. Included in this analysis are the first three harmonics with nonlinear coupling between diurnal and semi-diurnal tides.

Mayr, H. G.↗

Theory of the phase anomaly in the thermosphere

Discussion of the temperature-density phase anomaly on the basis of a quasi-three-dimensional model in which the thermosphere dynamics associated with wind circulation is considered in a self-consistent form. Included in this analysis are the first three harmonics, which involve nonlinear coupling between diurnal and semidiurnal tides. It is shown that the phase anomaly with exospheric temperature peaks near 1600 LT and mass density peaks between 1400 and 1445 LT can be reproduced in a self-consistent theory without invoking ad hoc assumptions and boundary conditions that would mask the physical processes to be explored. A number of factors and processes are found to contribute to the phase anomaly, including the semidiurnal and particularly the terdiurnal components, heat advection, diffusion, and energy coupling with the lower atmosphere.

Mayr, H. G.↗

The importance of quadrupole sources in prediction of transonic tip speed propeller noise

A theoretical analysis is presented for the harmonic noise of high speed, open rotors. Far field acoustic radiation equations based on the Ffowcs-Williams/Hawkings theory are derived for a static rotor with thin blades and zero lift. Near the plane of rotation, the dominant sources are the volume displacement and the rho U(2) quadrupole, where u is the disturbance velocity component in the direction blade motion. These sources are compared in both the time domain and the frequency domain using two dimensional airfoil theories valid in the subsonic, transonic, and supersonic speed ranges. For nonlifting parabolic arc blades, the two sources are equally important at speeds between the section critical Mach number and a Mach number of one. However, for moderately subsonic or fully supersonic flow over thin blade sections, the quadrupole term is negligible. It is concluded for thin blades that significant quadrupole noise radiation is strictly a transonic phenomenon and that it can be suppressed with blade sweep. Noise calculations are presented for two rotors, one simulating a helicopter main rotor and the other a model propeller. For the latter, agreement with test data was substantially improved by including the quadrupole source term.

Hanson, D. B.↗

Separation of core and crustal magnetic field sources

Fluid motions in the electrically conducting core and magnetized crustal rocks are the two major sources of the magnetic field observed on or slightly above the Earth's surface. The exact separation of these two contributions is not possible without imposing a priori assumptions about the internal source distribution. Nonetheless models like these were developed for hundreds of years Gauss' method, least squares analysis with a truncated spherical harmonic expansion was the method of choice for more than 100 years although he did not address separation of core and crustal sources, but rather internal versus external ones. Using some arbitrary criterion for appropriate truncation level, we now extrapolate downward core field models through the (approximately) insulating mantle. Unfortunately our view can change dramatically depending on the degree of truncation for describing core sources.

Shure, L.↗

Comparison of measured induced velocities with results from a closed-form finite state wake model in forward flight

An unsteady, three-dimensional induced-flow model is applied to compute the induced-flow distribution of a rotor in forward flight, and numerical results are compared against LDV measurements for both time-averaged and unsteady induced flow at the disk. The former flow shows good agreement with measured data, except just behind the pylon at the lowest advanced ratio and near the blade tips for rectangular blades at high advance ratios. The method performs as well or better than other codes that have been applied to these data, takes less computing time, and is better suited to aeroelastic analysis. Results with only four harmonics and 15 state variables converge to all fundamental characteristics of the time-averaged flow.

Peters, David A.↗

Spectral study of Venus global topography and geoid from Magellan and PVO data

An analysis of newly available global harmonic models for topography and geoid on Venus was conducted. It was found that the power spectral density for Venus topography has a power law dependence on wave-number characteristic of Brown Noise, similar to what is found for the Earth. However, the Venus topography spectrum presents a rollover at lower degree (l = 3) than is observed for the Earth spectrum and has smaller amplitudes than that of the Earth's. The Venus geoid also obeys a power law relationship, at least for small values of l, but with a smaller slope and more power (for l greater than 3) than the Earth geoid.

Kucinskas, A. B.↗

Precision Kinematic Sunyaev--Zel'dovich Measurements Across Halo Mass and Redshift with DESI DR2 and ACT DR6: Part II. Bright Galaxy Survey and Emission-Line Galaxies

We present the first high-significance spectroscopic stacked kinetic Sunyaev-Zel'dovich (kSZ) measurements of circumgalactic gas profiles for both Bright Galaxy Survey (BGS) and Emission Line Galaxy (ELG) tracers, combining DESI Data Release 2 with ACT Data Release 6. Using reconstructed line-of-sight velocities from the DESI galaxies and high-resolution ACT temperature maps, we detect the kSZ signal at high significance, reaching signal-to-noise ratios of up to $\sim$9 for BGS and $\sim$7.5 for ELGs in optimal stellar-mass selections. Together with the LRG measurements presented in Paper I, these constitute the most significant kSZ detections from any spectroscopic survey to date. We perform the analysis in both real and harmonic space, obtaining consistent results. By splitting both tracers into stellar-mass bins, we study the scaling of the kSZ amplitude with galaxy properties. Combining the kSZ measurements with ACT Data Release 6 (DR6) CMB lensing maps enables a joint calibration of the galaxy-halo connection and the gas fractions of host halos. For the BGS galaxies, we observe low gas fractions around the virial radius relative to standard expectations, likely attributable to active galactic nuclei (AGN) activity. We find some evidence for higher-mass halos retaining a larger fraction of their baryons, consistent with more efficient feedback in lower-mass systems. For the ELG sample, dominated by blue, star-forming galaxies, we provide the first detection of the gas distribution in ELG host halos. The ELGs appear to exhibit relatively high gas fractions, which points to the possibility of weaker feedback (due to e.g. low AGN and supernova feedback activity) at their mass scale. Finally, we present generalized Navarro-Frenk-White (GNFW) fits to the harmonic-space measurements, providing a compact parametrization of gas profiles for forward modeling in large-scale structure analyses.

Hadzhiyska, B. [Cambridge U.; Cambridge U., Inst. ↗

Continuously varying skin potentials elicited by sinusoidally varying electric shock potentials

An investigation was carried out to determine whether a form of quasi-linear systems analysis can be applied to electrodormal responses to yield new insights into the nature of the response mechanisms and their interrelationships. The response investigated was the electrodermal response (galvanic skin potential, GSP) as elicited by an electric shock stimulus applied to the skin. The response subsequent to this stimulation was examined and its characteristics measured. A series of experimental runs on three Ss was accomplished, using sinusoidal modulation envelopes of frequencies. Results showed that it was possible to drive the GSP and to achieve relatively high coherence between the driving frequency and the response itself. The analysis was limited to Fourier analysis of the response in order to determine the relative energies at the driving frequency and at successive harmonics of that driving frequency, and correlational analysis in order to determine the degree of linear relationship between the driving frequency and the driven response.

Senders, J. W.↗

The influence of a local wall deformation on the development of natural instabilities in a laminar boundary layer

The natural instabilities which propagate in the laminar boundary layer of a flat plate composed of intermittent wave trains are described. A spectral analysis determines the frequency range and gives a frequency and the harmonic 2 only if there is a wall deformation. This analysis provides the amplitude modulation spectrum of the instabilities. Plots of the evolution of power spectral density are compared with the numerical results obtained from the resolve of the Orr-Sommerfeld equation, while the harmonic is related to a micro-recirculating flow near the wall deformation.

Burnel, S.↗

Application of the Baseline Rotonet system to the prediction of helicopter tone noise

The capabilities of the baseline Rotonet system designed to predict helicopter noise are analyzed. The modules of the system utilized for main and tail rotor geometry and blade section aerodynamic characteristics, for analyses, and for source-to-observer geometry, and atmospheric and ground effects calculations are described; a diagram of the system is provided. The Rotonet system produces axial force, tone noise, and sound pressure level information and a one third octave spectrum related to rotor tone noise and broadband noise sources. Main rotor noise predictions are compared with flight data. It is observed that both sets of data reveal increase loading on the advancing side and decrease loading on the retreating side. The tone noise and sound pressure levels for the first and second harmonics correlate well with the flight data; however, there is only fair agreement for the third harmonics of the sound pressure level. Analysis of the spectra display lower noise levels for higher altitudes and lower speeds. It is noted that the baseline Rotonet system is applicable for predicting performance and noise signatures for the lower harmonics. A phase II Rotonet system for evaluating higher harmonics is being developed.

Golub, R. A.↗