Fission-induced recrystallization effect on intergranular bubble-driven swelling in U-Mo fuel
Not Available
SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Not Available
Nickel-based superalloy finds widespread applications in aerospace and extreme environments. They are known for their high temperature oxidation resistance under extended periods. However, the oxide formation and evolution which sets the stages for the later parabolic oxidation kinetics is not fully understood. This paper aims to provide new insights into the transient stage oxidation mechanism and kinetics of a typical Ni-based superalloy (Haynes 282). While tracking the chemical and microstructural evolution under micrometer scale at 800°C, we show that the oxide scale and its grain boundary species change significantly during the initial stages of oxidation and can have a profound impact on the oxidation kinetics. Cr 2 O 3 forms initially at the grain boundary along with minor amount of Al 2 O 3 . Then, the grain boundary region is enriched with copious amounts TiO 2 while Cr migrates away from the grain boundary. A noticeable change in the isothermal oxidation kinetics observed likely results from a mechanistic change from uniform surface oxidation to preferential outward diffusion of Ti 4+ ions through the grain boundary. Through first-principles calculations combined with energy dispersive spectroscopy, we confirmed the preferential outward diffusion of Ti 4+ ions as the diffusion barrier is lower for Ti than Cr along the grain boundaries. In conclusion, these findings highlight the critical role of early-stage grain boundary oxidation dynamics in dictating the long-term oxidation resistance of Ni-based superalloys and provide a foundation for future strategies to enhance their performance in extreme environments.
A set of computer models was used to define a growth system configuration that was then built and used to grow web with lower thermally generated stress. Aspects of research in the edge-defined film-fed growth (EFG) method of making Si ribbon are reported. A technique was developed to determine base resistivity and carrier lifetime in semicrystalline wafers. Automated growth of 150 kg of 15 cm-dia ingot material per crucible is reviewed. Scanning transmisson electron microscopy (STEM) and microprobe investigations of processed EFG ribbon are reported. The chemical composition of the large precipitates was studied. The structural arrangement and the electrical activity of distentions or close to the central twin plane in processed material were studied. The electrical and structural properties of grain boundaries in silicon are discussed. Temperature-dependence measurements of zero-bias conductance, a photoconductivity technique, and deep-level transient spectroscopy (DLTS) were developed. A grooving and staining technique, secondary ion mass spectroscopy, and EBIC measurements in scanning electron microscopy were used to study enhanced diffusion of phosphorus at grain boundaries in polycrystaline silicon. The fundamental mechanisms of abrasion and wear and the deformation of Si by a diamond in various fluid environments are described. The efficiency of solar cells made from EFG ribbon and Semix Inc. material is reported.
As single-junction silicon solar cells approach their theoretical limits, tandems provide the primary path to higher efficiencies. CdTe alloys can be tuned with magnesium (CdMgTe) or zinc (CdZnTe) for ideal tandem pairing with silicon. A II-VI/Si tandem holds the greatest promise for inexpensive, high-efficiency top cells that can be quickly deployed in the market using existing polycrystalline CdTe manufacturing lines combined with mature silicon production lines. Currently, all high efficiency polycrystalline CdTe cells require a chloride-based passivation process to passivate grain boundaries and bulk defects. This research examines the rich chemistry and physics that has historically limited performance when extending Cl treatments to polycrystalline 1.7-eV CdMgTe and CdZnTe absorbers. A combination of transmittance, quantum efficiency, photoluminescence, transmission electron microscopy, and energy-dispersive X-ray spectroscopy clearly reveals that during passivation, Mg segregates and out-diffuses, initially at the grain boundaries but eventually throughout the bulk. CdZnTe exhibits similar Zn segregation behavior; however, the onset and progression is localized to the back of the device. After passivation, CdMgTe and CdZnTe can render a layer that is reduced to predominantly CdTe electro-optical behavior. Furthermore, contact instabilities caused by inter-diffusion between the layers create additional complications. The results outline critical issues and paths for these materials to be successfully implemented in Si-based tandems and other applications.
The effect of an applied overpotential on oxygen isotope incorporation and diffusion in oxide thin film electrodes is investigated by a novel experimental approach. A special electrode geometry leads to in-plane electron flow, perpendicular oxide ion flow and a well-defined laterally varying driving force. This design allows one to obtain a series of tracer depth profiles induced by a range of overpotentials on one and the same thin film. The approach was applied to La 0.8 Sr 0.2 MnO 3 (LSM) thin films deposited by pulsed laser deposition (PLD) on yttria stabilized zirconia (YSZ) single crystals. Tracer depth profiles were measured by secondary ion mass spectrometry (SIMS). These depth profiles include examples of pronounced apparent uphill diffusion that can be explained by considering an interplay of polarization-induced changes in stoichiometry within the LSM grains combined with fast oxygen transport along the grain boundaries.
Low mutual solubility is expected to avert interdiffusion in layered composites of phase-separating metals. However, we show that Nb diffuses through polycrystalline Cu—despite the minimal bulk solubility of these elements—due to short circuit transport of Nb along certain grain boundaries in Cu. Atomistic modeling demonstrates that Nb-permeable Cu grain boundaries exhibit negative enthalpy of mixing of Nb, resulting in an enthalpically-stabilized solution of highly mobile Nb atoms that easily diffuse through the boundary. By contrast, Mo, which also has minimal solubility with Cu, has positive enthalpy of mixing at Nb-permeable Cu grain boundaries and does not diffuse through them. Furthermore, our findings suggest material selection and grain boundary engineering as pathways for designing improved diffusion barriers and thermally stable laminate composites.
Indium tin oxide (ITO) thin films were deposited on silicon substrates by radio-frequency magnetron sputtering. The influence of annealing temperature on the crystallite, surface morphology, defects evolution, and electrical property of the thin films was studied. The conductivity of the ITO films was significantly enhanced by two orders of magnitude by increasing the annealing temperature up to 600 °C, which was interpreted in point view of defects evolution in ITO films as revealed by positron annihilation. It was interesting to find that positron diffusion length was amazingly comparable to crystallite size in ITO films annealed below 300 °C, indicating positrons were preferentially localized and annihilated in defects around crystallite boundaries. By further increasing the temperature, positron diffusion length was far beyond the grain size with little increment. This demonstrated that defects were effectively removed around grain boundaries. The results indicated defect structure around crystallite/grain boundaries played an important role on carrier transportation in nanocrystal ITO films.
Low mutual solubility is expected to avert interdiffusion in layered composites of phase-separating metals. However, we show that Nb diffuses through polycrystalline Cu—despite the minimal bulk solubility of these elements—due to short circuit transport of Nb along certain grain boundaries in Cu. Atomistic modeling demonstrates that Nb-permeable Cu grain boundaries exhibit negative enthalpy of mixing of Nb, resulting in an enthalpically-stabilized solution of highly mobile Nb atoms that easily diffuse through the boundary. By contrast, Mo, which also has minimal solubility with Cu, has positive enthalpy of mixing at Nb-permeable Cu grain boundaries and does not diffuse through them. Furthermore, our findings suggest material selection and grain boundary engineering as pathways for designing improved diffusion barriers and thermally stable laminate composites.
Zirconium (Zr) based alloys are widely used as the cladding materials in light-water reactors. The water-side corrosion of these alloys degrades their structural integrity and poses serious safety concerns. During the Zr corrosion process, a thin Zr oxide (ZrO2) layer forms on the alloy surface and serves as a barrier layer for further corrosion. The majority of the oxide has the monoclinic phase. At the transition region between the oxide and the metal, the oxide contains a thin layer of stabilized tetragonal phase. It is found that the texture of the tetragonal layer determines the protectiveness of the oxide for corrosion. The transport of oxidizing species, such as anion defects, cation defects, and electron through the tetragonal oxide layer could be the rate limiting step of the corrosion. The defect diffusion can be affected by the growing stresses and microstructures such as grain boundaries and dislocations. In this work molecular dynamics simulations are used to investigate the anion and cation diffusion in bulk and at grain boundaries in tetragonal ZrO2. The results show that defect diffusion at grain boundaries is complex and the behavior strongly depends on the grain boundary type. For most of the grain boundaries studied the defect diffusion are much slower than in the bulk, implying that grain boundaries may not be fast defect transport paths during corrosion. The connection between the modeling results and published experimental work will also be discussed. This work is funded by the Laboratory Directed Research and Development (LDRD) program at Idaho National Laboratory.
Abstract High-resolution transmission electron microscopy and atom probe tomography are used to characterize the initial passivation and subsequent intergranular corrosion of degraded grain boundaries in a model Ni-30Cr alloy exposed to 360 °C hydrogenated water. Upon initial exposure for 1000 h, the alloy surface directly above the grain boundary forms a thin passivating film of Cr 2 O 3 , protecting the underlying grain boundary from intergranular corrosion. However, the metal grain boundary experiences severe Cr depletion and grain boundary migration during this initial exposure. To understand how Cr depletion affects further corrosion, the local protective film was sputtered away using a glancing angle focused ion beam. Upon further exposure, the surface fails to repassivate, and intergranular corrosion is observed through the Cr-depleted region. Through this combination of high-resolution microscopy and localized passive film removal, we show that, although high-Cr alloys are resistant to intergranular attack and stress corrosion cracking, degradation-induced changes in the underlying metal at grain boundaries make the material more susceptible once the initial passive film is breached.
Design principles suggested here aim toward high conversion efficiency (greater than 15 percent) in polysilicon cells. The principles seek to decrease the liabilities of both intragranular and grain-boundary-surface defects. The advantages of a phosphorus atom concentration gradient in a thin (less than 50 microns) base of a p(+)/n(x)/n(+) drift-field solar cell, which produces favorable gradients in chemical potential, minority-carrier mobility and diffusivity, and recombination lifetime (via phosphorus gettering) are suggested. The degrading effects of grain boundaries are reduced by these three gradients and by substituting atoms (P, H, F or Li) for vacancies on the grain-boundary surface. From recent experiments comes support for the benefits of P diffusion down grain boundaries and, for quasi-grain-boundary-free and related structures. New analytic solutions for the n(x)-base include the effect of a power-law dependence between P concentration and lifetime. These provide an upper-bound estimate on the open circuit voltage. Finite-difference numerical solutions of the six Shockley equations furnish complete information about all solar-cell parameters and add insight concerning design.
Uranium-Molybdenum alloy based fuels are the most promising fuel for the future high performance research reactors using low enriched uranium (LEU). However, when used in dispersion with aluminum, significant amount of interaction products form at the interface between the UMo fuel particle and the surrounding Al during in-pile tests which leads to non-acceptable swelling. To reduce the swelling in U-Mo/Al dispersion fuel at high burnups, different diffusion barrier coatings, e.g., ZrN, were deposited on the U-Mo particles to avoid the interaction between fuel particles and the Al matrix. These diffusion barrier coatings are very effective in reducing the formation of interaction layer and therefore the fuel swelling. So far, ZrN is selected as the candidate coating material for the European Dispersion Fuel program due to the superior thermophysical properties of ZrN. The thermodynamic and kinetic stability of ZrN coating with respect to Al and U-Mo has been studied by the current authors using density functional theory calculations. So far there are very few studies of the diffusion behaviors of inert gases in ZrN. A recent publication on irradiated (Pu,Zr)N reveals that the majority of fission-induced Xe is retained in the material, while He is release to the fuel pin to a large extent. This raises the questions on the underlying differences of inert gas behavior in nitride fuel. Therefore, the purpose of this study is to understand the incorporation and migration behavior of inert gases He, Kr and Xe in ZrN using density functional theory (DFT) based first-principles calculations. Using density-functional theory calculations we provided a systematic study of the incorporation and migration of fission gases in ZrN. We investigated the formation energies of several defects (vacancies, interstitials, divacancies, Frenkel pairs, and Schottky defects) and the incorporation energies of inert gases in these defects. Results show that the formation energies of point defects are strongly affected by the chemical potentials of N and Zr species. The energetically most favorable incorporation site for fission gases is found to be the first nearest neighbor Schottky defect, in which the fission gas atom sits at somewhere between the Zr and N vacancies. The predicted solution energies of rare gases, i.e, He, Kr and Xe, in ZrN, is almost linearly dependent on the atom size of inert gases. We compared the solution energy Xe in ZrN with several other nuclear materials with the same B1 structure (MX), e.g., TiN, UN and UC. The solution energies of Xe in MX are closely related to the size of vacancy sites. The potential migration mechanisms of Xe in ZrN include interstitial and vacancy-assisted diffusion. The calculations show that vacancies essentially act as Xe trapping sites. The migration behavior of Xe in N and Zr divacancy and Schottky defects were compared with that through tetrahedral interstitials. It is found that the migration barrier is much lower with the interstitial mechanism than those with the vacancy mechanism. Therefore, at low temperatures Xe diffusion in ZrN is mostly through the interstitial mechanism or existing grain boundaries while at high temperature volume diffusion could be preferred, i.e., diffusion with Zr and N vacancies. (authors)
Alloy 903 (FeNiCo+Nb) is currently used for certain components in industrial gas turbines for low coefficient of thermal expansion applications. A variance in creep behavior for material quality control evaluations suggested a possible effect of moisture level on stress rupture properties. To investigate the role of water vapor on the creep properties of alloy 903, controlled laboratory experiments were conducted at 650 C with 0 to 100% relative humidity. The water content was controlled by flowing dry air through a water bath at a constant temperature. A significant decrease of lifetime was observed in the presence of water vapor, which is likely related to grain boundary embrittlement by the inward diffusion of hydrogen. The increase of the microstructure grain aspect ratio by different forging processes generally improved the rupture lifetime and elongation in air. However, all specimens had reduced lifetime in the presence of water vapor despite the microstructure grain aspect ratios.
Nanocrystalline ceria exhibits a total conductivity several orders of magnitude higher than microcrystalline ceria in air at high temperature. The most widely accepted theory for this enhancement (based on fitting of conductivity data to various transport and kinetic models) is that relatively immobile positively charged defects and/or impurities accumulate at the grain boundary core, leading to a counterbalancing increase in the number of mobile electrons (small polarons) within a diffuse space charge region adjacent to each grain boundary. In an effort to validate this model, we have applied electrochemical strain microscopy to image the location and relative population of mobile electrons near grain boundaries in polycrystalline Sm-doped ceria in air at 20–200 °C. Our results show the first direct (spatially resolved) evidence that such a diffuse space charge region does exist in ceria, and is localized to both grain boundaries and the gas-exposed surface.
Not provided.
The migration of the 〈100〉 and 〈111〉 tilt boundaries in Ni and the Ni{sub 3}Al intermetallic compound is studied by molecular dynamics simulation. The low-angle 〈100〉 boundaries in Ni and Ni{sub 3}Al are shown to migrate much more slowly (by approximately two times at a temperature of 1700 K) that the 〈111〉 boundaries, which is related to different migration mechanisms of the 〈100〉 and 〈111〉 boundaries. The migration of the 〈100〉 boundaries is found to occur by the splitting of paired grain-boundary dislocations followed by a change of partner dislocations, which proceeds via the slip of split dislocations. The 〈111〉 tilt boundaries move according to a combined action of the following two mechanisms: the mechanism described above and the mechanism consisting in joint slip of paired grain-boundary dislocations, which have common slip planes in contrast to the grain-boundary dislocations in 〈100〉 boundaries. Since the joint slip of paired dislocations has a relatively low activation energy, the mobility of the 〈111〉 tilt boundaries is higher than that of the 〈100〉 boundaries. Our molecular dynamics studies demonstrate that the migration rate of analogous boundaries in Ni{sub 3}Al is significantly lower than in Ni (by approximately three times at a temperature of 1700 K), which is partly caused by the additional energy consumed for the formation of a disordered region behind a migrating boundary in Ni{sub 3}Al. Because of a relatively low boundary mobility in Ni{sub 3}Al, the contribution of diffusion atomic displacements during boundary migration is higher as compared to Ni.
In this work, the effects of the sintering parameters, such as temperature and the techniques used (HP and SPS), on CNT/Al composite interfaces are studied. The major role of the native aluminum oxide (Al{sub 2}O{sub 3}) layer covering the aluminum grains is highlighted. It is shown that, for a sintering temperature below 620 °C, the amorphous Al{sub 2}O{sub 3} layer prevents the reaction between aluminum and carbon. For greater sintering temperatures, the breaking of the oxide layer due to its crystallization leads to the formation of aluminum carbide (Al{sub 4}C{sub 3}) by reaction between aluminum and the CNT. The Al{sub 4}C{sub 3} crystals grow perpendicularly to the matrix grain boundaries by thermally activated diffusion of the carbon atoms coming from the CNT. It is also demonstrated that, by limiting the sintering time, which is the case in SPS, it is possible to limit the growth of the Al{sub 4}C{sub 3} crystals and thus to preserve the CNT. - Highlights: • The high reactivity between CNT and Al matrix, resulting Al{sub 4}C{sub 3} formation during the sintering process is highlighted. • We demonstrate, thanks to in-situ TEM observations, that Al{sub 4}C{sub 3} crystals grow into aluminum grains by carbon diffusion. • The native aluminum oxide around the aluminum particles prevents the diffusion of carbon into the aluminum grains. • We show that the protective layer can be broken because of its crystallization, leading to the formation of Al{sub 4}C{sub 3}. • SPS, by limiting the sintering duration, is an interesting way for preparing CNT/Al composites without carbide formation.