Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “frequency deviation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

Nonlinear evolution, propagation, electron-trapping, and damping effects of ion-acoustic solitons using fully kinetic PIC simulations

We investigate ion acoustic solitary waves (solitons) of varying amplitudes in a one-dimensional plasma using fully kinetic particle-in-cell simulations. The initial soliton conditions are based on the Korteweg–de Vries (KdV) equation, treating ions as a cold species and electrons with finite temperature. Our findings reveal that KdV solitons evolve nonlinearly to a saturated state at higher amplitude, deviating from KdV predictions for ion density and electric potential, and from the Boltzmann relation for electron density. At this saturated state, the KdV model cannot accurately describe the soliton behavior. For small amplitudes, Sagdeev's model describes the saturated state, but not the soliton width; for larger amplitudes, it models the width accurately, but not the amplitude. These discrepancies arise from assuming a Boltzmann relation for electron density, while electron trapping creates non-Boltzmann densities—a deviation that increases with soliton amplitude. Additionally, we observe that the soliton amplitude oscillates roughly at the electron bounce frequency. The soliton is better described by Schamel's electron density formulation and a modified KdV equation incorporating electron trapping. The soliton velocity matches best with predictions from Sagdeev's and Schamel's models. Moreover, the soliton speed–amplitude relationship differs from existing theoretical predictions. Finally, we find minimal ion and electron Landau damping effects.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The first measurement of the muon anomalous magnetic moment from the Fermilab Muon g-2 collaboration

This paper will cover the physics and methods behind Fermilab’s Muon g-2 Experiment, along with the long-awaited results from Run-1. The experiment was undertaken to resolve the tension between the Standard Model and the previous measurement taken at Brookhaven National Laboratory. The measured value of the muon magnetic anomaly is a µ (FNAL) = 116592040(54) × 10 -11 . This result is in good agreement with Brookhaven’s previous measurement. The new world average, a µ (Exp) = 116592061(41) × 10 -11 , shows a difference from the theoretical value of the Standard Model (SM), a µ (SM) = 116591810(43) × 10 -11 , of 4.2 standard deviations, strongly hinting at physics beyond the Standard Model. The experiment requires the simultaneous measurement of the muon precession frequency, the magnetic field, and the muons’ distribution in the field. All three of these measurements will be discussed in context, along with the main systematic corrections and uncertainties.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Modifications of the wideband FM TDRS system

The wideband FM scheme for the Tracking and Data Relay Satellite (TDRS) system is discussed. The technique achieves a spread-spectrum advantage against multipath and interference through the inclusion of a large deviation FM subcarrier. The signal also permits co-channel spread-spectrum multipath access (SSMA) on the downlink from mission spacecraft to TDRS. Each user is assigned a unique combination of carrier and subcarrier which allows the ground receiver to separate user signals with overlapping spectra. The system was modified by the addition of a low-deviation fine range tone to both the uplink and the downlink, separate from the wide-deviation subcarrier. The magnitude of the interference components due to other SSMA signals are analyzed. A carrier and subcarrier frequency plan was worked out based on the modified signal format. A configuration to accommodate 42 and 60 users is described. The inclusion of ambiguity resolving ranging sidetones is also discussed.

Wachsman, R. H.↗

A high-sensitivity search for extraterrestrial intelligence at lambda 18 cm

A targeted high-sensitivity search for narrow-band signals near a wavelength of 18 cm has been conducted using the 91-m radiotelescope of the National Radio Astronomy Observatory. The search included 201 nearby solar-type stars and achieved a frequency resolution of 5.5 Hz over a 1.4-MHz bandwidth. This high spectral resolution was obtained through a non-real-time reduction procedure using a Mark I VLBI recording terminal in conjunction with the CDC 7600 computational facility at the NASA-Ames Research Center. This is the first high-resolution search for narrow-band signals in this wavelength regime. To date it is the most sensitive search per unit observing time of any search strategy which does not postulate a unique magic frequency. Data show no evidence for narrow-band signals due to extraterrestrial intelligence at a 12-standard-deviation upper limit on signal strength of 1.1 x 10 to the -23rd W/sq m.

Tarter, J.↗

JPL pulsar timing observations. III - Pulsar rotation fluctuations

Pulsar arrival-time data from a timing program carried out at the Jet Propulsion Laboratory from 1968 to 1982 at 2390 MHz were analyzed to study the precision of neutron star rotation rates. Most of the 24 objects in the sample show 'timing activity' as deviations from the smooth spin-down expected from a simple electromagnetic torque mechanism. About 20 events in both frequency and frequency derivative across the sample of objects are identified, whose properties differ from those of the large-amplitude 'glitches' observed from a few objects. Prospects are good for the millisecond pulsar PSR 1937 + 214 being better than terrestrial maser clocks on time scales of a few years.

Cordes, J. M.↗

The missing impact craters on Venus

The size-frequency pattern of the 842 impact craters on Venus measured to date can be well described (across four standard deviation units) as a single log normal distribution with a mean crater diameter of 14.5 km. This result was predicted in 1991 on examination of the initial Magellan analysis. If this observed distribution is close to the real distribution, the 'missing' 90 percent of the small craters and the 'anomalous' lack of surface splotches may thus be neither missing nor anomalous. I think that the missing craters and missing splotches can be satisfactorily explained by accepting that the observed distribution approximates the real one, that it is not craters that are missing but the impactors. What you see is what you got. The implication that Venus crossing impactors would have the same type of log normal distribution is consistent with recently described distribution for terrestrial craters and Earth crossing asteroids.

Speidel, D. H.↗

Ultrastable reference frequency distribution utilizing a fiber optic link

The Frequency Standards Laboratory at the Jet Propulsion Laboratory (JPL) is responsible for the generation and distribution of ultra-stable reference frequency in NASA's Deep Space Network (DSN). Certain assemblies and components of the Radio Science and VLBI systems are located in the cones of tracking antennas hundreds of meters from the Frequency and Timing Subsystem's frequency standards. The very stringent requirements of these users challenge the performance of state-of-the-art frequency sources as well as the associated signal distribution system. The reference frequency distribution system described is designed around a low temperature coefficient of delay (TCD) optical fiber. On-site measurements of the fiber optic link alone indicate 100 MHz phase noise performance on the order of -120 dBc at 1 Hz from the carrier and Allan deviation on the order of parts in 10(exp 16) at 1000 seconds averaging time. The measured phase noise and stability of the link indicate that the performance characteristics of the hydrogen maser frequency standards are not degraded by the distribution system. Thus, optical fibers and electro-optic devices as distribution media appear to be a viable alternative to the classical coaxial cable distribution systems.

Calhoun, Malcolm↗

Deviations from LTE in a stellar atmosphere

Deviations for LTE are investigated in an atmosphere of hydrogen atoms with one bound level, satisfying the equations of radiative, hydrostatic, and statistical equilibrium. The departure coefficient and the kinetic temperature as functions of the frequency dependence of the radiative cross section are studied analytically and numerically. Near the outer boundary of the atmosphere, the departure coefficient is smaller than unity when the radiative cross section grows with frequency faster than with the square of frequency; it exceeds unity otherwise. Far from the boundary the departure coefficient tends to exceed unity for any frequency dependence of the radiative cross section. Overpopulation always implies that the kinetic temperature in the statistical-equilibrium atmosphere is higher than the temperature in the corresponding LTE atmosphere. Upper and lower bounds on the kinetic temperature are given for an atmosphere with deviations from LTE only in the optically shallow layers when the emergent intensity can be described by a radiation temperature.

Kalkofen, W.↗

Tabulation of Mie scattering calculation results for microwave radiative transfer modeling

In microwave radiative transfer model simulations, the Mie calculations usually consume the majority of the computer time necessary for the calculations (70 to 86 percent for frequencies ranging from 6.6 to 183 GHz). For a large array of atmospheric profiles, the repeated calculations of the Mie codes make the radiative transfer computations not only expensive, but sometimes impossible. It is desirable, therefore, to develop a set of Mie tables to replace the Mie codes for the designated ranges of temperature and frequency in the microwave radiative transfer calculation. Results of using the Mie tables in the transfer calculations show that the total CPU time (IBM 3081) used for the modeling simulation is reduced by a factor of 7 to 16, depending on the frequency. The tables are tested by computing the upwelling radiance of 144 atmospheric profiles generated by a 3-D cloud model (Tao, 1986). Results are compared with those using Mie quantities computed from the Mie codes. The bias and root-mean-square deviation (RMSD) of the model results using the Mie tables, in general, are less than 1 K except for 37 and 90 GHz. Overall, neither the bias nor RMSD is worse than 1.7 K for any frequency and any viewing angle.

Yeh, Hwa-Young M.↗

Adiabatic behavior of an elliptical vortex in a time-dependent external strain flow

The adiabatic behavior of two-dimensional (2D) fluid vortices subject to slowly varying, time-dependent external strain flows is studied theoretically, and experimentally using magnetized non-neutral electron plasmas. Here the E × B drift dynamics of the electrons perpendicular to the magnetic field are analogous to the motion of fluid vorticity under the 2D Euler equations describing ideal fluids. A low-dimensional elliptical vortex patch model is used along with a WKB approximation to derive a formula for the breaking of an adiabatic invariant due to the changing external flow. The invariant is interpreted as the amplitude of a perturbative oscillation about a stable fixed point corresponding to a steady elliptical vortex. Smooth, hyperbolic tangent and piecewise linear ramp functions are considered for the external strain time dependence. Standard exponential breaking is observed in the former case, whereas the latter exhibits a power-law breaking curve with periodic modulation. It is found that a driving term in the equations of motion contributes the majority of the breaking whereas the frequency variation plays a weaker, but significant role. The experimental data agree closely with the theoretical model. The most significant deviation is due to inviscid damping behavior associated with the smooth edges of the experimental vortices, which tends to reduce the amplitude of the oscillation. Finally, the results are compared and contrasted with other related experimental, numerical, and theoretical work.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Spectroscopic aspects of differential method for sounding gas composition of the atmosphere

The problems concerning the dynamics of populations of the sounded atmospheric gas molecule levels taking into account the nonmonochromatic character of radiation, durations of exciting and sounding pulses, rates of relaxation of excited vibration-rotation states population along different channels in a natural multicomponent mixture of gases and air were investigated. The problems of spectroscopic software, completeness and accuracy of the initial spectroscopic information, information on channels and rates of relaxation from the viewpoint of developing specific schemes of sounding are discussed. The values of deviations of vibration-rotation level populations of some atmospheric molecules from their equilibrium value at simultaneous action of double frequency radiation on the sounding path and the corresponding dynamic variation of lidar return amplitude were estimated. The importance of nonlinear spectrosopic effects in the lidar return value variation at sounding radiation frequency equaling the resonance frequency of vibration-rotation transition in the problem on sounding the humidity profiles and concentrations of gaseous pollutants was also estimated.

Zuev, V. V.↗

Impedance-Based Structural Health Monitoring for Composite Laminates at Cryogenic Environments

One of the important ways of increasing the payload in a reusable launch vehicle (RLV) is to replace heavy metallic materials by lightweight composite laminates. Among various parts and systems of the RLV, this project focuses on tanks containing cryogenic fuel. Historically, aluminum alloys have been used as the materials to construct fuel tanks for launch vehicles. To replace aluminum alloys with composite laminates or honeycomb materials, engineers have to make sure that the composites are free of defects before, during, and after launch. In addition to robust design and manufacturing procedures, the performance of the composite structures needs to be monitored constantly.In recent years, the impedance-based health monitoring technique has shown its promise in many applications. This technique makes use of the special properties of smart piezoelectric materials to identify the change of material properties due to the nucleation and progression of damage. The piezoceramic patch serves as a sensor and an actuator simultaneously. The piezoelectric patch is bonded onto an existing structure or embedded into a new structure and electrically excited at high frequencies. The signature (impedance or admittance) is extracted as a function of the exciting frequency and is compared with the baseline signature of the healthy state. The damage is quantified using root mean square deviation (RMSD) in the impedance signatures with respect to the baseline signature. A major advantage of this technique is that the procedure is nondestructive in nature and does not perturb the properties and performance of the materials and structures. This project aims at applying the impedance-based nondestructive testing technique to the damage identification of composite laminates at cryogenic temperature.

Tseng, Kevin↗

Path Loss Prediction Over the Lunar Surface Utilizing a Modified Longley-Rice Irregular Terrain Model

This study introduces the use of a modified Longley-Rice irregular terrain model and digital elevation data representative of an analogue lunar site for the prediction of RF path loss over the lunar surface. The results are validated by theoretical models and past Apollo studies. The model is used to approximate the path loss deviation from theoretical attenuation over a reflecting sphere. Analysis of the simulation results provides statistics on the fade depths for frequencies of interest, and correspondingly a method for determining the maximum range of communications for various coverage confidence intervals. Communication system engineers and mission planners are provided a link margin and path loss policy for communication frequencies of interest.

Foore, Larry↗

Universal relations for neutron star 𝑓-mode and 𝑔-mode oscillations

Among the various oscillation modes of neutron stars, 𝑓- and 𝑔- modes are the most likely to be ultimately observed in binary neutron star mergers due to their relatively large coupling and shared frequencies with tidal excitations. The 𝑓-mode frequency and damping time are known to correlate in normal neutron stars with their compactness, and previous fits to hadronic stars are extended and shown to be valid for an extremely broad sampling of equations of state using a piecewise polytropic parametrization scheme for hadrons and a constant sound-speed parametrization for quark matter. Separate fits applicable to quark (self-bound) stars are improved. Much more significant correlations exist with tidal deformability, and therefore with moment of inertia and quadrupole moment. It is conclusively demonstrated that these correlations are the same for all types of stars, whether hadronic, hybrid, or pure quark, and its accuracy is quantified. A novel 1-node branch of the 𝑓-mode that occurs in low-mass hybrid stars in a narrow mass range just beyond the critical mass necessary for a phase transition to appear is identified. This 1-node branch shows the largest, but still small, deviations from the universal correlation for any configuration. It is characterized by a nonmonotonic relation between neutron star mass and 𝑓-mode frequency, in contrast to the behavior otherwise observed in normal, quark and hybrid stars. The 𝑔-mode only exists in matter with a nonbarotropic equation of state involving temperature, chemical potential or composition (such as being out of beta equilibrium), or a phase transition in barotropic matter. Here, the 𝑔-mode therefore could serve as a probe for studying phase transitions in hybrid stars. In contrast with the 𝑓-mode, 𝑔-mode frequencies do not correlate well with tidal deformability, but depend strongly on properties of the transition (the density and the magnitude of the discontinuity) at the transition. Imposing causality and maximum mass constraints, a fit involving neutron star and phase transition properties is found and the 𝑔-mode frequency is determined to have an upper bound of about 1.25 kHz. However, if the sound speed 𝑐𝑠 in the inner core at densities above the phase transition density is restricted to 𝑐$^{2}_{𝑠}$ ≤1/3, 𝑔-mode frequencies can only reach about 0.8 kHz, which are significantly lower than 𝑓-mode frequencies (1.3–2.8 kHz). 𝑔-mode gravitational wave damping times are found to be extremely long, >10 4 s (102 s) in the inner core with 𝑐$^{2}_{𝑠}$ ≤1/3 (1), in comparison with 𝑓-mode damping times (0.1–1 s).

Composition of astronomical objects↗

Micromovements and discomfort associated with flight mission with helmet operation tasks with different levels of cognitive workload

When performing stationary tasks under elevated cognitive workload, individuals must perform continual muscle contractions to maintain stability of the body, resulting in fatigue of the postural muscles. When the muscles perform these contractions in a prolonged manner, the body potentially responds through small changes in body movements—micromovements that may lead to discomfort. The study purpose was to evaluate impact of cognitive load on micromovements. The micromovements were measured during three different cognitive workloads; low, medium, and high. The NASA-TLX score was used to evaluate the perceived mental workload and discomfort was assessed by visual analog scale. In total, 60 subjects (30 males and 30 females) were recruited and performed cognitive tasks that simulated flight operations such as changing the radio frequency based on air traffic control messages, balancing the fuel levels in simulated fuel tanks, and aiming a reticle in a designated moving target using the cyclic control. Cognitive load was defined by the frequency of events. Micromovements were defined by changes in the center of pressure (COP) of the seat pan and COP standard deviation. It was found that the high cognitive workloads had the highest NASA-TLX scores including mental demands, temporal demands, and effort. The neck area had the highest overall levels of discomfort followed by upper back. The highest standard deviation for COP shift and number of micromovements occurred for medium cognitive workloads. In conclusion, while there were some interesting trends, few trends reached a statistical significance due to high variability among subjects for the outcome variables.

60 APPLIED LIFE SCIENCES↗

Role of local atomic short-range order distribution in alloys: Why it matters in Si-Ge-Sn alloys

Short-range order (SRO) in alloys refers to deviations from a perfectly random distribution of atoms in lattice sites within a short distance. Conventionally, the degree of the deviations has been quantified using an average SRO parameter, but such a coarse-grained description does not reflect how the deviations occur at a finer level. Here we show the distribution of the local atomic SRO parameter, which describes the occurring frequency of a local structural motif, carries the crucial information for both structures and properties in Si-Ge-Sn alloy system. Here this is demonstrated through the fact that distinct SRO structures can exhibit the same average SRO parameter but very different distributions and disparate electronic structures. By deliberately creating special structures that explicitly match the structural information at different levels, we show the distribution of local atomic SRO parameters contain critical structural features that are missing in the average SRO parameter but can substantially contribute to material’s properties. Our finding thus calls for the need for considering the finer structural details to effectively describe alloys’ structures and properties.

36 MATERIALS SCIENCE↗

Was the Big Bang hot?

Techniques for verifying the spectrum defined by Woody and Richards (WR, 1981), which serves as a base for dust-distorted models of the 3 K background, are discussed. WR detected a sharp deviation from the Planck curve in the 3 K background. The absolute intensity of the background may be determined by the frequency dependence of the dipole anisotropy of the background or the frequency dependence effect in galactic clusters. Both methods involve the Doppler shift; analytical formulae are defined for characterization of the dipole anisotropy. The measurement of the 30-300 GHz spectra of cold galactic dust may reveal the presence of significant amounts of needle-shaped grains, which would in turn support a theory of a cold Big Bang.

Wright, E. L.↗

HRMA calibration handbook: EKC gravity compensated XRCF models

This document, consisting of hardcopy printout of explanatory text, figures, and tables, represents one incarnation of the AXAF high resolution mirror assembly (HRMA) Calibration Handbook. However, as we have envisioned it, the handbook also consists of electronic versions of this hardcopy printout (in the form of postscript files), the individual scripts which produced the various figures and the associated input data, the model raytrace files, and all scripts, parameter files, and input data necessary to generate the raytraces. These data are all available electronically as either ASCII or FITS files. The handbook is intended to be a living document and will be updated as new information and/or fabrication data on the HRMA are obtained, or when the need for additional results are indicated. The SAO Mission Support Team (MST) is developing a high fidelity HRMA model, consisting of analytical and numerical calculations, computer software, and databases of fundamental physical constants, laboratory measurements, configuration data, finite element models, AXAF assembly data, and so on. This model serves as the basis for the simulations presented in the handbook. The 'core' of the model is the raytrace package OSAC, which we have substantially modified and now refer to as SAOsac. One major structural modification to the software has been to utilize the UNIX binary pipe data transport mechanism for passing rays between program modules. This change has made it possible to simulate rays which are distributed randomly over the entrance aperture of the telescope. It has also resulted in a highly efficient system for tracing large numbers of rays. In one application to date (the analysis of VETA-I ring focus data) we have employed 2 x 10(exp 7) rays, a substantial improvement over the limit of 1 x 10(exp 4) rays in the original OSAC module. A second major modification is the manner in which SAOsac incorporates low spatial frequency surface errors into the geometric raytrace. The original OSAC included the ability to use Legendre-Fourier polynomials to describe deviations from the basic optical prescription. To this we have added bicubic splines to address a deficiency in the handling of the sharper deformations in the areas of mirror support pads. SAO has developed software (TRANS-FIT) to translate the most common finite element analysis models into these forms for incorporation into the raytrace program.

Tananbaum, H. D.↗