Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “flow testing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 361 records · Page 20

Electric Motor Thermal Management Research: Annual Progress Report

Past work in the area of active convective cooling provided data on the average convective heat transfer coefficients of circular orifice automatic transmission fluid (ATF) jets impinging on stationary targets intended to represent the wire bundle surface of the motor end-winding. Work during FY16 focused on the impact of alternative jet geometries that could lead to improved cooling over a larger surface of the motor winding. Results show that the planar jet heat transfer coefficients over a small (12.7-mm-diameter) target surface are not too much lower than for the circular orifice jet in which all of the ATF from the jet impinges on the target surface. The planar jet has the potential to achieve higher heat transfer over a larger area of the motor end winding. A new test apparatus was constructed to measure the spatial dependence of the heat transfer relative to the jet nozzle over a larger area representative of a motor end-winding. The tested planar flow geometry has the potential to provide more uniform cooling over the full end-winding surface versus the conventional jet configuration. The data will be used by motor designers to develop thermal management strategies to improve motor power density. Work on passive thermal design in collaboration with Oak Ridge National Laboratory to measure the thermal conductivity of wire bundle samples representative of end-winding and slot-winding materials was completed. Multiple measurement techniques were compared to determine which was most suitable for measuring composite wire bundle samples. NREL used a steady-state thermal resistance technique to measure the direction-dependent thermal conductivity. The work supported new interactions with industry to test new materials and reduce passive-stack thermal resistance in motors, leading to motors with increased power density. NREL collaborated with Ames Laboratory in the area of material characterization. The work focused on measuring the transverse rupture strength of new magnet materials developed at Ames. The impact of the improved transverse rupture strength is a mechanically stronger magnet that is easier for manufacturers to implement into motor designs. The thermal conductivity of the new magnet materials was also measured in comparison to two commercially available AlNiCo magnet materials. The impact of the thermal conductivity of the magnet material will need to be analyzed in the context of a motor application.

30 DIRECT ENERGY CONVERSION↗

Impact of Pendent Ammonium Groups on Solubility and Cycling Charge Carrier Performance in Nonaqueous Redox Flow Batteries

The synthesis, characterization, electrochemical performance, and theoretical modeling of two base-metal charge carrier complexes incorporating a pendent quaternary ammonium group, [Ni(bppn-Me3)][BF4], 3′, and [Fe(PyTRENMe)][OTf]3, 4’, are described. Both complexes were produced in high yield and fully characterized using NMR, IR, and UV–vis spectroscopies as well as elemental analysis and single-crystal X-ray crystallography. The solubility of 3′ in acetonitrile showed a 283% improvement over its neutral precursor, whereas the solubility of complex 4’ was effectively unchanged. Cyclic voltammetry indicates an ∼0.1 V positive shift for all waves, with some changes in reversibility depending on the wave. Bulk electrochemical cycling demonstrates that both 3′ and 4’ can utilize the second more negative wave to a degree, whereas 4’ ceases to have a reversible positive wave. Flow cell testing of 3′ and 4’ with Fc as the posolyte reveals little improvement to the cycling performance of 3′ compared with its parent complex, whereas 4’ exhibits reductions in capacity decay when cycling either negative wave. Postcycling CVs indicate that crossover is the likely source of capacity loss in complexes 3, 3′, and 4’ because there is little change in the CV trace. Density functional theory calculations indicate that the ammonium group lowers the HOMO energy in 3′ and 4’, which may impart stability to cycling negative waves while making positive waves less accessible. The incorporation of a positively charged species can improve solubility, stored electron density, and capacity decay depending on the complex, features critical to high energy density redox flow battery performance.

25 ENERGY STORAGE↗

Extended forward sensitivity analysis of one-dimensional isothermal flow

Sensitivity analysis and uncertainty quantification is an important part of nuclear safety analysis. In this work, forward sensitivity analysis is used to compute solution sensitivities on 1-D fluid flow equations typical of those found in system level codes. Time step sensitivity analysis is included as a method for determining the accumulated error from time discretization. The ability to quantify numerical error arising from the time discretization is a unique and important feature of this method. By knowing the relative sensitivity of time step with other physical parameters, the simulation is allowed to run at optimized time steps without affecting the confidence of the physical parameter sensitivity results. The time step forward sensitivity analysis method can also replace the traditional time step convergence studies that are a key part of code verification with much less computational cost. One well-defined benchmark problem with manufactured solutions is utilized to verify the method; another test isothermal flow problem is used to demonstrate the extended forward sensitivity analysis process. Through these sample problems, the paper shows the feasibility and potential of using the forward sensitivity analysis method to quantify uncertainty in input parameters and time step size for a 1-D system-level thermal-hydraulic safety code. (authors)

97 MATHEMATICS AND COMPUTING↗

Isospin emission and flow at high baryon density: A test of the symmetry potential

High-energy heavy-ion collisions are studied to access nuclear-matter properties at high density. Particular attention is paid to the selection of observables sensitive to the poorly known symmetry energy at high baryon density, of large fundamental interest, even for the astrophysics implications. Using fully consistent transport simulations built on effective theories, we test isospin observables ranging from nucleon and cluster emissions to collective flows (in particular the elliptic, squeeze-out, part). The effects of the competition between stiffness and momentum dependence of the symmetry potential on the reaction dynamics are thoroughly analyzed. In this way we try to shed light on the controversial neutron and proton effective mass splitting at high baryon and isospin densities. New, more exclusive, experiments are suggested.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Laboratory flow experiments for visualizing carbon dioxide-induced, density-driven brine convection

Injection of carbon dioxide (CO{sub 2}) into saline aquifers confined by low-permeability cap rock will result in a layer of CO{sub 2} overlying the brine. Dissolution of CO{sub 2} into the brine increases the brine density, resulting in an unstable situation in which more-dense brine overlies less-dense brine. This gravitational instability could give rise to density-driven convection of the fluid, which is a favorable process of practical interest for CO{sub 2} storage security because it accelerates the transfer of buoyant CO{sub 2} into the aqueous phase, where it is no longer subject to an upward buoyant drive. Laboratory flow visualization tests in transparent Hele-Shaw cells have been performed to elucidate the processes and rates of this CO{sub 2} solute-driven convection (CSC). Upon introduction of CO{sub 2} into the system, a layer of CO{sub 2}-laden brine forms at the CO{sub 2}-water interface. Subsequently, small convective fingers form, which coalesce, broaden, and penetrate into the test cell. Images and time-series data of finger lengths and wavelengths are presented. Observed CO{sub 2} uptake of the convection system indicates that the CO{sub 2} dissolution rate is approximately constant for each test and is far greater than expected for a diffusion-only scenario. Numerical simulations of our system show good agreement with the experiments for onset time of convection and advancement of convective fingers. There are differences as well, the most prominent being the absence of cell-scale convection in the numerical simulations. This cell-scale convection observed in the experiments is probably initiated by a small temperature gradient induced by the cell illumination.

54 ENVIRONMENTAL SCIENCES↗

The Underground Test Area Project of the Nevada Test Site: Building Confidence in Groundwater Flow and Transport Models at Pahute Mesa Through Focused Characterization Studies

Pahute Mesa at the Nevada Test Site contains about 8.0E+07 curies of radioactivity caused by underground nuclear testing. The Underground Test Area Subproject has entered Phase II of data acquisition, analysis, and modeling to determine the risk to receptors from radioactivity in the groundwater, establish a groundwater monitoring network, and provide regulatory closure. Evaluation of radionuclide contamination at Pahute Mesa is particularly difficult due to the complex stratigraphy and structure caused by multiple calderas in the Southwestern Nevada Volcanic Field and overprinting of Basin and Range faulting. Included in overall Phase II goals is the need to reduce the uncertainty and improve confidence in modeling results. New characterization efforts are underway, and results from the first year of a three-year well drilling plan are presented.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

CFD Modeling of an 81" Single Slope Barrier Wall Drainage Window for on Grade and Sag Conditions

The main goal of this study is to design a drainage window in an 81" single slope barrier wall for on-grade and sag conditions that could replace the standard ODOT I-3 barrier catch basin. The ODOT design guidelines are as follows: a) Examine configurations of the opening to the flume behind the wall under the wall section to maximize conveyance of flow to a roadside ditch section. b) Examine window lengths and configurations to maximize hydraulic efficiency on a grade up to an absolute maximum window length of 20 ft. c) Use a minimum opening height of 4 in. and consider tapering to an increased height at the outlet to the flume to reduce the potential for debris clogging beneath the barrier section. On-grade locations are analyzed for longitudinal slope up to 5% and spread up to 10 ft. Sag locations, represented by pavement at zero longitudinal slope, are analyzed for water depths up to 18 in. The roadway cross section consists of a 10-ft shoulder at a 4.0% cross slope and pavement at a 1.6% cross slope. All surfaces are represented with Manning’s n = 0.015. Computational fluid dynamics (CFD) is used to perform the analysis. The modeling approach follows previous studies by the authors. The new design is similar to a slotted inlet: a rectangular opening cut into the bottom of a barrier (e.g., a temporary barrier or single slope barrier wall), which typically has a uniform cross section. Findings from laboratory tests of flow under Florida DOT barrier walls were used for additional validation of the modeling approach used in this study.

42 ENGINEERING↗

SAS4A/SASSYS-1 Validation with EBR-II Tests Performed During the SHRT Testing Program

The EBR-II sodium-cooled fast reactor supported a wide range of fast reactor research activities. The final fifteen years of operations at EBR-II were used for experiments and tests to demonstrate the importance of passive safety in liquid metal reactors and the capability of such systems to provide strong passive responses during off-normal conditions. The Shutdown Heat Removal Test program at EBR-II provided test data supporting the validation of computer codes for design, licensing, and operation of LMRs, among other objectives. The program included nearly sixty tests, most of which were protected and unprotected loss of flow and loss of heat sink tests run at various initial powers and flow rates. This report documents the results of modeling and simulation of tests from the Shutdown Heat Removal Test program to support validation of Argonne’s SAS4A/SASSYS-1 fast reactor safety analysis code. SHRT-17 was a protected loss of flow test where a loss of electrical power to all sodium coolant pumps was simulated to demonstrate the effectiveness of natural circulation cooling characteristics. SHRT-45R was an unprotected loss of flow test where the control rod scram function of the plant protection system was disabled to demonstrate the effectiveness of EBR-II’s passive reactivity feedbacks. BOP-301 and BOP-302R were unprotected loss of heat sink tests that demonstrated how reactivity feedback effects driven by changes to the core inlet temperature can shut down the fission process. This validation activity leverages modeling and simulation efforts that originated under an International Atomic Energy Agency Coordinated Research Project for benchmark analysis of the EBR-II Shutdown Heat Removal Tests. The SAS4A/SASSYS-1 models originally developed for the CRP have been modernized to utilize new code features and modeling practices. Differences between the predicted and measured test data were explored and the causes of these differences were identified as being due to modeling approximations, uncertainty in transient component behavior, and instrumentation uncertainties. Overall, it was concluded that for SHRT-17, SHRT-45R, BOP-301, and BOP-302R there was good agreement between the flow, power, and temperature predictions and the measured data.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Conformational Control as a Design Strategy to Tune the Redox Behavior of Benzotriazole Negolytes for Nonaqueous Flow Batteries

Here, we present a molecular engineering strategy to tune the reduction potentials of benzotriazole derivatives as high-energy-density negolytes in nonaqueous redox flow batteries. Within nonaqueous electrolytes, these derivatives, notably 2-(o-tolyl)-2H-benzo[d][1,2,3]triazole (1), demonstrate a theoretical capacity of up to 93.8 Ah L⁻¹ and a reduction potential of –2.35 V vs ferrocene/ferrocenium (Fc/Fc⁺). Introducing dimethyl substitution (i.e., 2-(2,6-dimethylphenyl)-2H-benzo[d][1,2,3]triazole (4)) shifts the reduction potential even more negatively to –2.55 V vs Fc/Fc⁺. We ascribe the nonlinear effect of dimethyl substitution on reduction potential to ground-state conformational effects. Flow battery tests with negolyte 1 and ferrocene posolyte demonstrated >90% Coulombic efficiency at 6.7 mA cm⁻² with improved cyclability in the presence of lithium bis(trifluoromethylsuylfonyl)imide supporting salt.

25 ENERGY STORAGE↗

Uncertainty Quantification and Global Sensitivity Analysis of Subsurface Flow Parameters to Gravimetric Variations During Pumping Tests in Unconfined Aquifers

We study the contribution of typically uncertain subsurface flow parameters to gravity changes that can be recorded during pumping tests in unconfined aquifers. We do so in the framework of a Global Sensitivity Analysis and quantify the effects of uncertainty of such parameters on the first four statistical moments of the probability distribution of gravimetric variations induced by the operation of the well. System parameters are grouped into two main categories, respectively, governing groundwater flow in the unsaturated and saturated portions of the domain. We ground our work on the three-dimensional analytical model proposed by Mishra and Neuman (2011), which fully takes into account the richness of the physical process taking place across the unsaturated and saturated zones and storage effects in a finite radius pumping well. The relative influence of model parameter uncertainties on drawdown, moisture content, and gravity changes are quantified through (a) the Sobol' indices, derived from a classical decomposition of variance and (b) recently developed indices quantifying the relative contribution of each uncertain model parameter to the (ensemble) mean, skewness, and kurtosis of the model output. Our results document (i) the importance of the effects of the parameters governing the unsaturated flow dynamics on the mean and variance of local drawdown and gravity changes; (ii) the marked sensitivity (as expressed in terms of the statistical moments analyzed) of gravity changes to the employed water retention curve model parameter, specific yield, and storage, and (iii) the influential role of hydraulic conductivity of the unsaturated and saturated zones to the skewness and kurtosis of gravimetric variation distributions. The observed temporal dynamics of the strength of the relative contribution of system parameters to gravimetric variations suggest that gravity data have a clear potential to provide useful information for estimating the key hydraulic parameters of the system.

54 ENVIRONMENTAL SCIENCES↗

Characterization of Solid Oxide Fuel Cells with LSCF-SDC Composite Cathodes

This paper reports the study of an anode-supported SOFC cell containing an LSCF-SDC composite cathode. The SOFC cell was tested at different temperatures and reactant flow rates. After testing, the cell was sectioned and characterized using SEM/EDS. Such analysis indicated that no structural damage and no significant interdiffusion of elements among the layers occurred. The measured electrochemical performance data at different temperatures indicate an Arrhenius behavior or temperature activated processes. The low-porosity anode functional layer appears to be very sensitive to low hydrogen contents. The electrochemical performance is also affected by changing air flow rates.

DiGiuseppe, Gianfranco↗

Adaptive downstream tensorial eddy viscosity for hybrid large‐eddy simulations‐Reynolds‐averaged‐Navier–Stokes simulations

An adaptive method is developed to improve the accuracy of eddy‐viscosity Reynolds‐averaged‐Navier–Stokes (RANS) model in hybrid large‐eddy simulations (LES)‐RANS simulations by using available upstream LES results. The method first gets the tensorial eddy viscosity from the upstream LES solution at the LES‐RANS interface and then uses that information to improve the downstream RANS model by invoking the weak‐equilibrium assumption. The proposed method was evaluated via two test problems—flow in a channel and over a periodic hill. Results obtained show the proposed approach to increase the accuracy and stability of hybrid LES‐RANS simulations. Since the modification of the downstream RANS model is based on the tensorial eddy viscosity from the upstream LES solution, the method is adaptive to the problem being studied.

Zhang, Wanjia↗

Acido-basicity of lanthana/alumina catalysts and their activity in ethanol conversion

Lanthana on alumina samples (0.2, 0.8 and 4.7 theoretical monolayers) were prepared by incipient wetness impregnation using γ-Al 2 O 3 as support. Characterization has been performed by BET, XRD, skeletal FT-IR, DR-UVvis, XPS, HR-TEM, IR spectra of the surface OH, adsorbed pyridine and CO 2 , and isopropanol TPD. Here ethanol conversion was investigated both in temperature-programmed surface reaction (TPSR) dynamic conditions as well as in steady-state flow reactor tests. Lanthanum addition stabilizes alumina with respect to sintering and loss of surface area and La- containing phases are observed only for the high-La loaded catalyst. La-alumina catalysts are less active in ethanol dehydration than alumina but more selective to diethyl ether at partial conversion. 5%La 2 O 3 /Al 2 O 3 is also equally or more selective than alumina to ethylene at high conversion, producing less carbonaceous material during reaction. Thus, this catalytic system might be a good candidate for (bio)ethylene production through (bio)ethanol dehydration.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Model simulation and experiments of flow and mass transport through a nano-material gas filter

A computational model for evaluating the performance of nano-material packed-bed filters was developed. The porous effects of the momentum and mass transport within the filter bed were simulated. For the momentum transport, an extended Ergun-type model was employed and the energy loss (pressure drop) along the packed-bed was simulated and compared with measurement. For the mass transport, a bulk dsorption model was developed to study the adsorption process (breakthrough behavior). Various types of porous materials and gas flows were tested in the filter system where the mathematical models used in the porous substrate were implemented and validated by comparing with experimental data and analytical solutions under similar conditions. Good agreements were obtained between experiments and model predictions.

adsorption↗

Catalytic Site Requirements for N2O Decomposition on Cu-, Co-, and Fe-SSZ-13 Zeolites

N2O decomposition is investigated on Cu, Co and Fe-exchanged SSZ-13 zeolite catalysts at relatively low metal loadings. The catalysts are synthesized by solution ion exchange, and subjected to X-ray diffraction (XRD), temperature-programed-reduction by H2 (H2-TPR), temperature-programed-reaction of N2O (N2O-TPR) coupled with in-situ transmission FTIR, and finally steady-state flow reaction tests. At low N2O pressures (< 0.05 kPa), all catalysts display pseudo first-order kinetics. From Arrhenius analysis, Cu and Fe-SSZ-13 display very different apparent activation energies but similar pre-exponential factors, suggesting their similar reaction mechanisms. N2O decomposition follows a dual-site mechanism, occurring on dimeric M-O-M sites in these catalysts, and O2 is formed by the combination of two O ad-atoms from two vicinal metal sites. Under low N2O pressure (0.05 kPa) and first-order kinetic regime, the reaction is limited by N-O cleavage on bare metal active sites. In comparison to Cu-SSZ-13, the much higher N2O decomposition rate over Fe-SSZ-13 is attributed to the much lower activation barriers for the N-O cleavage step. N2O decomposition occurs on isolated Co2+ ions in Co-SSZ-13. The rate-limiting step is N-O cleavage on an O-occupied Co site in the low-pressure first order kinetic regime. This single-site mechanism leads to much higher pre-exponential factors as compared to the dual-site mechanism. This beneficial factor for reaction rate enhancement, however, is compromised by the much higher activation barriers over this catalyst.

Lin, Fan↗

A Monte Carlo volumetric-ray-casting estimator for global fluence tallies on GPUs

A Monte Carlo fluence estimator has been designed to take advantage of the computational power of graphical processing units (GPUs). This new estimator, termed the volumetric-ray-casting estimator, is an extension of the expectation estimator. It can be used as a replacement of the track-length estimator for the estimation of global fluence. Calculations for this estimator are performed on the GPU while the Monte Carlo random walk is performed on the central processing unit (CPU). This method lowers the implementation cost for GPU acceleration of existing Monte Carlo particle transport codes as there is little modification of the particle history logic flow. Three test problems have been evaluated to assess the performance of the volumetric-ray-casting estimator for neutron transport on GPU hardware in comparison to the standard track-length estimator on CPU hardware. Evaluation of neutron transport through air in a criticality accident scenario showed that the volumetric-ray-casting estimator achieved 23 times the performance of the track-length estimator using a single core CPU paired with a GPU and 15 times the performance of the track-length estimator using an eight core CPU paired with a GPU. Finally, simulation of a pressurized water reactor fuel assembly showed that the performance improvement was 6 times within the fuel and 7 times within the control rods using an eight core CPU paired with a single GPU.

74 ATOMIC AND MOLECULAR PHYSICS↗