SEARCH · Engineering Papers
Results for “finite element modeling”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Finite-Element Modeling of Borehole Breakouts for In Situ Stress Determination
Not provided.
Thermal-electric coupled-field finite element modeling and experimental testing of high-temperature ion sources for the production of radioactive ion beams
In isotope separation on line facilities the target system and the related ion source are two of the most critical components. In the context of the selective production of exotic species (SPES) project, a 40 MeV 200 μA proton beam directly impinges a uranium carbide target, generating approximately 10{sup 13} fissions per second. The radioactive isotopes produced in this way are then directed to the ion source, where they can be ionized and finally accelerated to the subsequent areas of the facility. In this work both the surface ion source and the plasma ion source adopted for the SPES facility are presented and studied by means of numerical thermal-electric models. Then, numerical results are compared with temperature and electric potential difference measurements, and finally the main advantages of the proposed simulation approach are discussed.
Investigation of the Effect of In-Plane Fiber Waviness in Composite Materials through Multiple Scales of Testing and Finite Element Modeling
Defects in materials can reduce strengths and lifetimes of manufactured parts. The number of possible defects increases with the complexity inherent in composite materials. The wind industry uses composite wind turbine blades in which the manufacturing process induces a number of defects. In order for the wind industry to continue sustainable expansion, the effects of defects must be better understood. In-plane (IP) fiber waviness is the focus of this work. The three main parts of this work include testing on the coupon level, modeling on the coupon level, and testing of beams in four-point bending (with and without defects). The coupon level testing includes partial IP waves, similar to those in manufactured parts, rather than full width IP waves. This allows investigation into complex interactions and varying failure mechanisms caused by the fiber misalignment gradient. Partial waves are also modeled to both validate testing as well as to increase robustness of a previously developed progressive damage modeling method. Lastly, a sandwich beam test specimen for testing in 4-point bending is developed to investigate the effects of fiber waviness in both tension and compression when loaded in flexure.
Involute Working Group – Development and Validation of the Finite Element Models of the Cheverton-Kelley Experiments
In an involute-plate reactor, the fuel plates and side-plates are subjected to a non-uniform distribution of loads. Temperature variation derives from a variation in power distribution throughout the core. Due to small imperfections in the channel thickness, the coolant flowing in between the plates produces pressure differentials with a non-uniform distribution on the plate surface. The main goal of the analysis presented in this technical report is to investigate the ability of the commercial software STAR-CCM+ to model deformation of involute plates subjected to mechanical and thermal loads, representative of involute reactor operation conditions.
Predicting Pit Stability On Additively Manufactured SS316 Via Finite Element Modeling (Initial Draft) [Slides]
The main objective of this work is to predict pit stability for a variety of conditions, to determine what parameters will have the most potent impact
Finite Element Model Levelling for Material Model Calibration using Digital Image Correlation.
Abstract not provided.
Validation of Finite Element Models for Puncture of Al7075 Plates of Various Thickness.
Abstract not provided.
Dead Ends and Challenges in Simplified Finite Element Modeling of a Resonant Plate.
Abstract not provided.
A Simplified Finite Element Model for Design of a Resonant Plate.
Abstract not provided.
ALEGRA: finite element modeling for shock hydrodynamics and multiphysics.
Abstract not provided.
Validation of a Finite Element Model of a Resonant Plate in the Shock Domain.
Abstract not provided.
BCC Ta single crystals during Taylor impact - Using a coupled dislocation dynamics and finite element model.
Abstract not provided.
Evaluation of machine learning and finite-element modeling methods for defect localization using demonstration vibration data
This brief report provides an update on FY24 efforts from the Acoustics team in the Instrumentation and Sensors technical area at Los Alamos National Laboratory to evaluate suitable data processing and modeling techniques for vibration-based defect localization.
A Validated Finite Element Modeling Tool for Hydrodynamic Loading and Structural Analysis of Ocean Deployed Macroalgae Farms
The objective of this project was to develop and validate a fine-tuned, 3D computational modeling tool for high-fidelity simulations of macroalgae cultivation and harvest systems. To develop this tool, a full understanding of the geometric, material and hydrodynamic properties associated with farming kelp in exposed environments was necessary. Experiments and numerical modeling were done at increasing scales from 1) tank tests with a 1 m model, 2) to field tests with a 61 m culture line at a sheltered site, 3) to field tests with a 122 m culture line at an exposed site and to 4) a 5- line array at the exposed site with 186 m of culture length. The results of the experimental tank tests yielded a set of hydrodynamic drag-area coefficients for a 1 m aggregate based on densely grown kelp at 16 kg/m with a length up to 3 m as described in Fredriksson et al. This work provided the basis to model kelp as a 1 m aggregate based on in-situ geometric and material properties to include measurements of kelp blade length and width, number of blades, yield per m, material mass density and cantilever tests to obtain modulus of elasticity.
The multifaceted nature of uncertainty in structure-property linkage with crystal plasticity finite element model
Explore the source record for details and available documents.
Nonlinear Multi-Harmonic Phase Resonance Simulations of High-Fidelity Finite Element Models
Explore the source record for details and available documents.
A Partitioned Method for Reduced OrderModel-Finite Element Model (ROM-FEM)and ROM-ROM Couplings with SeparateReduced Bases for Interior and InterfaceVariables
Explore the source record for details and available documents.