SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
This presentation discusses the first campaign on the Deimos platform. There was planned for 3 configurations and got 6. In process of writing ICSBEP evaluation with Section 1: to external review end of FY25 and the Full evaluation to TRG: FY27.
The mechanical behavior of nanoparticles governs their performance and stability in many applications. However, the small sizes of technologically relevant nanoparticles, with diameters in the range of 10 nm or less, significantly complicate experimental examination. These small nanoparticles are difficult to manipulate onto commercial test platforms and deform at loads that are below the typical noise floor of the testing instruments. Here, we synthesized small platinum nanoparticles directly onto a mechanical tester and used a modified nanomanipulator to enhance load resolution to the nanonewton scale. We demonstrated the in situ compression of an 11.5-nm platinum nanoparticle with simultaneous high-resolution measurements of load and particle morphology. Molecular dynamics simulations were performed on similarly sized particles to achieve complementary measurements of load and morphology, along with atomic resolution of dislocations. The experimental and simulation results revealed comparable values for the critical resolved shear stress for failure, 1.28 and 1.15 GPa, respectively. Altogether, this investigation demonstrated the promise of, and some initial results from, the combination of atomistic simulations and in situ experiments with an unprecedented combination of high spatial resolution and high load resolution to understand the behavior of metal nanoparticles under compression.
A photonic topological insulator features robust directional propagation and immunity to defect perturbations of the edge/surface state. Exciton-polaritons, that is, the hybrid quasiparticles of excitons and photons in semiconductor microcavities, have been proposed as a tunable nonlinear platform for emulating topological phenomena. However, mainly due to excitonic material limitations, experimental observations so far have not been able to enter the nonlinear condensation regime or only show localized condensation in one dimension. Here, in this study, we show a topological propagating edge state with polariton condensation at room temperature and without any external magnetic field. We overcome material limitations by using excitonic CsPbCl 3 halide perovskites with a valley Hall lattice design. The polariton lattice features a large bandgap of 18.8 meV and exhibits strong nonlinear polariton condensation with clear long-range spatial coherence across the critical pumping density. The geometric parameters and material composition of our nonlinear many-body photonic system platform can in principle be tailored to study topological phenomena of other interquasiparticle interactions. Polariton condensation of topological propagating edge states is demonstrated with halide perovskite microcavities.
We present Phoenix, a scalable hypergraph analytics framework for data analytics and knowledge discovery that was implemented on the leadership class computing platforms at Oak Ridge National Laboratory (ORNL). Our software framework comprises a distributed implementation of a streaming server architecture which acts as a gateway for various hypergraph generators/external sources to connect. Phoenix has the capability to utilize diverse hypergraph generators, including HyGen, a very large-scale hypergraph generator developed by ORNL. Phoenix incorporates specific algorithms for efficient data representation by exploiting hidden structures of the hypergraphs. Our experimental results demonstrate Phoenix’s scalable and stable performance on massively parallel computing platforms. Phoenix’s superior performance is due to the merging of high-performance computing with data analytic.
The Mu2e experiment at the Fermilab will search for a coherent neutrinoless conversion of a muon into an electron in the field of an aluminum nucleus with a sensitivity improvement by a factor of 10,000 over existing limits. In this work, the Mu2e Trigger and Data Acquisition System (TDAQ) uses otsdaq framework as the online Data Acquisition System (DAQ) solution. Developed at Fermilab, otsdaq integrates several framework components — an artdaq-based DAQ, an art-based event processing, and an EPICS-based detector control system (DCS), and provides a uniform multi-user interface to its components through a web browser. Data streams from the Mu2e tracker and calorimeter are handled by the artdaq-based DAQ and processed by a one-level software trigger implemented within the art framework. Events accepted by the trigger have their data combined, post-trigger, with the separately read out data from the Mu2e Cosmic Ray Veto system. Foundation of the Mu2e DCS, EPICS – an Experimental Physics and Industrial Control System – is an open-source platform for monitoring, controlling, alarming, and archiving. A prototype of the TDAQ and the DCS systems has been built and tested over the last three years at Fermilab’s Feynman Computing Center, and now the production system installation is underway. This work presents their status and focus on the installation plans and procedures for racks, workstations, network switches, gateway computers, DAQ hardware, slow controls implementation, and testing.
Coordination chemistry trends across the periodic table are often difficult to probe experimentally due to limitations in finding a versatile but consistent chelating platform that can accommodate various elements without changing its coordination mode. Herein, we present new metal/ligand systems covering a wide range of ionic radii, charges, and elements. Five different ligands derived from the Keggin structure (HBW 11 O 39 8– , PW 11 O 39 7– , SiW 11 O 39 8– , GeW 11 O 39 8– , and GaW 11 O 39 9– ) were successfully crystallized with six different cations (Na + , Sr 2+ , Ba 2+ , La 3+ , Ce 4+ , and Th 4+ ) and characterized by single-crystal X-ray diffraction. Twenty-five new compounds were obtained by using Cs + as the counterion, yielding a consistent base formula of Cs x [M(XW 11 O 39 ) 2 ]·nH 2 O. Despite having a similar first-coordination sphere geometry (i.e., 8-coordinated), the nature of the central cation was found to impact the long-range geometry of the complexes. This unique crystallographic data set shows that, despite the traditional consensus, the local geometry of the cation (i.e., metal–oxygen bond distance) is not enough to depict the full impact of the complexed metal ion. The bending and twisting of the complexes, as well as ligand–ligand distances, were all impacted by the nature of the central cation. We also observed that counterions play a critical role by stabilizing the geometry of the M(XW 11 ) 2 complex and directing complex–complex interactions in the lattice. We also define certain structural limits for this type of complex, with the large Ba 2+ ion seemingly approaching those limits. Finally, this study thus lays the foundation for capturing the coordination chemistry of other rarer elements across the periodic table such as Ra 2+ , Ac 3+ , Bk 4+ , Cf 3+ , etc.
We compare continuous monitoring systems (CMS) from three different vendors on six operating oil and gas sites in the Appalachian Basin using several months of data. We highlight similarities and differences between the three CMS solutions when deployed in the field and compare their output to concurrent top-down aerial measurements and to site-level bottom-up inventories. Furthermore, we compare vendor-provided emission rate estimates to estimates from an open-source quantification algorithm applied to the raw CMS concentration data. This experimental setup allows us to separate the effect of the sensor platform (i.e., sensor type and arrangement) from the quantification algorithm. We find that 1) localization and quantification estimates rarely agree between the three CMS solutions on short time scales (i.e., 30 min), but temporally aggregated emission rate distributions are similar between solutions, 2) differences in emission rate distributions are generally driven by the quantification algorithm, rather than the sensor platform, 3) agreement between CMS and aerial rate estimates varies by CMS solution but is close to parity when CMS estimates are averaged across solutions, and 4) similar sites with similar bottom-up inventories do not necessarily have similar emission characteristics. These results have important implications for developing measurement-informed inventories and for incorporating CMS-inferred emission characteristics into emission mitigation efforts.
The idea of using individual molecules as conducting wires, regulators, and interconnects for charges in electronic circuitry has catalyzed the vibrant development of the field of single-molecule electronics. The ability to reliably and repeatedly construct single-molecule junctions (SMJs) has enabled the study of charge transport through a broad spectrum of individual molecules. Over the past decade, the capability of the SMJ platform has been greatly expanded thanks to the development of new experimental techniques and the integration of knowledge and methodologies from other disciplines. New opportunities beyond electrical conductance have emerged at the atomic and molecular scale. It has been demonstrated in many recent studies that the SMJ can now serve as a powerful and versatile tool to address critical physical and chemical questions that are otherwise inaccessible. Furthermore, this perspective focuses on the new capabilities and functionalities of the SMJ beyond conductance measurements and how they have enabled the investigation of crucial single-molecule processes and advanced our understanding beyond molecular electronics.
Following the discovery of a new family of kagomé prototypical materials with structure AV 3 Sb 5 (A=K, Rb, and Cs), there has been a heightened interest in studying the correlation-driven electronic phenomena in these kagomé lattice systems. The study of these materials has gone beyond magneto-transport measurements to reveal exciting features such as Dirac bands, anomalous Hall effect, bulk superconductivity with T c ~0.9–2.5K, and the observation of charge density wave instabilities, suggesting an intertwining of topological physics and new quantum orders. Moreover, very recent works on numerous types of experiments have appeared further examining the unconventional superconductivity and the exotic electronic states found within these kagomé materials. Theories on the strong interactions that play a role in these systems have been proposed to shed light on the nature of these topological charge density waves. In this brief review, we summarize these recent experimental findings and theoretical proposals and envision the materials as new platforms to study the interplay between topological physics and strongly correlated electronic systems.
Rayleigh-Taylor instability growth is shown to be hydrodynamically scale-invariant in convergent cylindrical implosions for targets that varied in radial dimension and implosion timescale by a factor of three. The targets were driven directly by laser irradiation providing a short impulse, and instability growth at an embedded aluminum interface occurs as it converges radially inward by a factor of2.25 and decelerates on a central foam core. Late-time growth factors of 14 are observed for a single-modem= 20 azimuthal perturbation at both scales, despite the differences in laser drive conditions between the experimental facilities, consistent with predictions from radiation-hydrodynamics simulations. This platform enables detailed investigations into the limits of hydrodynamic scaling in high-energy-density systems.
Generally, large electrolytic capacitors (E-caps) are required to decouple the double-line frequency power fluctuation inherent in all single-phase dc-ac or ac-dc converters. These E-caps pose the weak link in the photovoltaic (PV) inverter because they have poor reliability as a result of short life expectancy and higher equivalent series resistance (ESR) which leads to lower system efficiency. In this paper, multiport smart dual-inverter modules are proposed for residential PV inverter systems with balanced outputs to eliminate the requirement of large decoupling capacitors, thus leading to more reliable and highly efficient inverter modules. The balanced dual outputs are controlled in phase quadrature such that the double frequency current is completely eliminated. One phase supports the standalone residential loads, and the other phase interfaces with the grid, which is synchronized to the utility grid. Also, the proposed modular configuration is scalable to accommodate higher power rating by stacking and paralleling multiple modules. Simulation results for the dual-inverter modules rated for 1 kW each are presented to validate the proposed concept. Experimental results from a controller hardware-in-the-loop (CHIL) platform also verify its feasibility.
The discovery of superconductivity in square-planar nickelates has offered a rich materials platform to explore the origins of high-temperature superconductivity. However, experimental investigations have largely been limited to the infinite-layer R NiO 2 ( R , rare earth) nickelates. For this work we constructed a phase diagram of multilayer square-planar Nd n+1 Ni n O 2n+2 compounds and found signatures of superconductivity for dimensionality n = 4 to 8. Upon decreasing n , the superconducting anisotropy evolves owing to 4ƒ electron effects, and electronic structure characteristics approach cuprate-like behavior. Magnetic fluctuations persist from within the superconducting regime and into the overdoped, nonsuperconducting regime. The superconducting regime overlaps with that of chemically doped infinite-layer nickelates, demonstrating underlying commonalities as well as differences across varying structural realizations of square-planar nickelates. Our work establishes this layered template for creating new nickel-based superconductors.
There is a rising need for the measurement and understanding of hydrogen transport properties in materials for the energy and transportation industries. The Hydrogen Permeation Analysis Tool (HyPAT) provides a user friendly interface for batch analysis of dynamic hydrogen permeation data to calculate the transport properties permeability, solubility, and diffusivity. A built in literature database provides an easy comparison to known values. A common method for measuring these hydrogen transport properties is dynamic pressure rise permeation experiments, for example, those done in the Static Gas Absorption and Permeation (SGAP) experiment at INL. Most laboratories develop individual, in-house codes for data analysis. HyPAT provides a platform that can be adopted by other user groups for such experimental analysis and significantly reduce personnel time spent performing data analysis.
A transformational process based on nano-confined ionic liquid (NCIL) membranes was developed for capturing ≥97% CO 2 from natural gas combined cycle (NCCC) flue gas. The NCIL membranes were prepared by loading amino acid ionic liquid into a framework composed of single-walled carbon nanotube mesh filled with graphene oxide quantum dots. The membranes exhibited CO 2 permeance as high as 2,000 GPU with a CO 2 /N2 selectivity of 2,300 for a typical NGCC flue gas composition. When H 2 O vapor sweep was applied in the permeate side, 96.6% CO2 dry-basis purity and 97.6% CO 2 capture rate were achieved for a simulated NGCC flue gas with single stage. In the process design, a highly H 2 O-selective membrane would be needed to recover majority of the H 2 O vapor, and the recovered H 2 O vapor could be recycled to the permeate side of the NCIL membrane. Sulfonated poly(ether ether ketone) membranes were successfully developed for this purpose. These membranes exhibited H 2 O permeance great than 11,000 GPU and H 2 O/CO 2 selectivity greater than 1,000 at 70ºC for a feed mixture consisting of 14.5 vol% H2O and balanced CO 2 . A standalone membrane model using MATLAB platform was developed for process simulation. The model was validated with experimental data. Techno-economic analysis based on the testing data collected during the current program suggests this transformational membrane process can achieve 97% CO 2 capture efficiency with a cost of $47.8/tonne of CO 2 , which is a 21% reduction versus DOE’s reference case B31B.97.
The Mu2e experiment at Fermilab will attempt to detect a coherent neutrinoless conversion of a muon into an electron in the field of an aluminum nucleus, with a sensitivity that is 10,000 times greater than existing limits. The Mu2e trigger and data acquisition system (TDAQ) uses the otsdaqframework as its online Data Acquisition System (DAQ) solution. Developed at Fermilab, otsdaq integrates several components, such as an artdaq-based DAQ, an art-based event processing, and an EPICS-based detector control system (DCS), and provides a uniform multi-user interface toits components through a web browser. The data streams from the Mu2e tracker and calorimeter are handled by the artdaq-based DAQ and processed by a one-level software trigger implemented within the art framework. Events accepted by the trigger have their data combined, post-trigger, with the separately read-out data from the Mu2e Cosmic Ray Veto system. The foundation of Mu2e DCS, EPICS, an Experimental Physics and Industrial Control System, is an open-source platform for monitoring, controlling, alarming, and archiving. Over the last three years, a prototype ofthe TDAQ and DCS systems has been built and tested at Fermilab’s Feynman Computing Center.Currently, the production system installation is underway. At the end, this work presents a brief update on the installation of racks and DAQ hardware.
Currently, 10-15% of the world’s energy is consumed by chemical separations, and more than 80% of that is used to purify organic liquids and recover rare earth elements and critical minerals. Membrane nanofiltration presents an energy-efficient, cost-effective, and eco-friendly alternative to current separation technologies. These complex liquid environments require high- performance, chemically-resistant membrane materials. Recently discovered Covalent Organic Frameworks (COFs) possess desirable properties as membrane materials for complex liquid separations. COFs are highly crystalline, chemically and thermally stable, with tunable size and charge. COFs, especially two-dimensional highly crystalline COFs, possess narrow pore-size distribution and controlled porous structures. Two-dimensional COFs are also resistant to swelling, another feature beneficial in complex liquid separations. Molecular interactions in complex liquid systems often dictate final membrane performance, resulting in a discrepancy between designed and apparent COF properties. Understanding and resolving this discrepancy is critical in utilizing COF membranes as a viable alternative to energy-intensive separations. The primary objective of this thesis was to use a commercially available COF TpPa-1 as a platform to investigate how mixed solvent environment affects COF membrane performance via experimental and molecular modeling studies. Specifically, the effects of solution pH, solvent- solvent-solute interactions in mixed solvents, and COF chemistry were carefully examined on apparent TpPa-1 pore size and permeability and targeted solute rejection of COF membranes for neat and mixed solvents. Experimental COF filtration performance was compared and corroborated with modeling predication. Findings from this study will provide guidance for future COF design, synthesis, and desired functional COF membrane performance.
The shock-to-detonation transition properties of the triaminotrinitrobenzene based PBX 9502 high explosive (HE) are experimentally and computationally explored in extremely high input pressure conditions. These include both slightly sub-Chapman–Jouguet and overdriven input pressure conditions, namely, ∼25 and ∼31 GPa, respectively. Our experiments capture the transient buildup of a shock-induced reaction via measurement of HE and polymethyl methacrylate window interface particle velocity profiles for a variety of sample thicknesses for this insensitive HE. These observations necessitate extremely thin explosive samples, and the high rates of reaction provide a considerable challenge to optical diagnostics. Samples at these thicknesses also provide an opportunity for evaluation of potential micro-structure effects on the resulting shock-to-detonation-transition measurements. To address this, the thin samples are also characterized via x-ray micro-computed tomography. Finally, a pair of previously established continuum-level detonation performance modeling approaches for PBX 9502 were used to analyze the experiments. The employed model variants crucially differ in their definition of each model’s empirical reaction rate functional form, utilization of shock state quantities, and local flow variable dependencies. As a result, the present experiments provide a novel platform to evaluate the quantitative and qualitative consequences stemming from these modeling choices in a challenging initiation scenario, largely beyond the chosen calibration range of either model. This new experimental information will provide a platform for both improved physics and model parameterizations for this well-studied explosive.
Strongly interacting arrays of Rydberg atoms provide versatile platforms for exploring exotic many-body phases and dynamics of correlated quantum systems. Motivated by recent experimental advances, we show that the combination of Rydberg interactions and appropriate lattice geometries naturally leads to emergent Z 2 gauge theories endowed with matter fields. Based on this mapping, we describe how Rydberg platforms could realize two distinct classes of topological Z 2 quantum spin liquids, which differ in their patterns of translational symmetry fractionalization. Additionally, we also discuss the natures of the fractionalized excitations of these Z 2 spin liquid states using both fermionic and bosonic parton theories and illustrate their rich interplay with proximate solid phases.